Densely-stacked N-doped mesoporous TiO2/carbon microsphere derived from outdated milk as high-performance electrode material for energy storages

Spherical N-doped mesoporous TiO₂/C (MTC) composite micro-particles are produced by spray drying (SD) and carbonization process. The particle size of MTC microsphere is between 2 and 3.4?µm, and the N-doped amorphous C around TiO₂ could provide a conductive matrix, and buffer the volume change. When evaluated as electrodes for Li-ion batteries (LIBs) and Li-S batteries (LSBs), the MTC microsphere exhibits relatively high discharge-voltage plateau, excellent capacity retention and rate capability. As anode for LIBs, after 200 cycles, a reversible capacity more than 230?mA?h?g^?1 can achieved at 1?C. And for LSBs, a specific capacity of 1317.7?mA?h?g^?1 at 1?C and the capacity retention of 73.8% after 500 cycles. The superior electrochemical performance is ascribed to robust scaffolding architecture and conductive N-doped carbon matrix. The excellent electrochemical performance and process ability of the MTC microspheres make them very attractive as electrode materials for use in high rate battery application.     

Enhancing the electrochemical performance of d-Mo2CTx MXene in lithium-ion batteries and supercapacitors by sulfur decoration

With the development of the energy industry, electrochemical energy storage technology is increasingly involved in developing innovations in the field. The materials of the electrode have a significant influence on the performance of energy storage devices. For this purpose, two-dimensional MXene with excellent electrical conductivity, mechanical strength, and a variety of possible surface-active terminations are attracting much attention. In the present work, S-decorated d-Mo₂CT_x (d-Mo₂CT_x--S) is designed. The first-principles calculations reveal that it may possess good energy storage characteristics. Due to the decoration with S, unique morphology and structure are obtained, conferring stability, optimized Li⁺ storage, improved charge transport, and lithium-ion adsorption capabilities. Compared with d-Mo₂CT_x, d-Mo₂CT_x--S exhibits higher discharge capacity (623 mAh g⁻¹ at 1 A g⁻¹) as lithium-ion electrode material and higher specific capacitance (561 F g⁻¹ at 1 A g⁻¹). As a supercapacitor, the material also shows excellent cyclic stability (20,000 charge-discharge cycles). This work may inspire the exploration of other MXene and new surface functionalization methods to improve the performance of MXene as electrode materials for new energy devices.     

Ultrathin N‐doped carbon‐coated TiO2 coaxial nanofibers as anodes for lithium ion batteries

The structural optimization of TiO₂ materials has a significance for improving the electrochemical performance since TiO₂ suffers from poor electronic conductivity. For this purpose, ultrathin N‐doped carbon‐coated TiO₂ coaxial nanofibers have been designed and synthesized by a facile electrospinning approach. Microstructure analysis indicates that the TiO₂ nanofibers can be coated by the ultrathin carbon layers. Electrochemical tests reveal that the rate performance and cycling ability of TiO₂@C nanofibers have been enhanced obviously. The TiO₂@C6 nanofibers carbonized at 600°C exhibit superior features with a specific discharge capacity of 284 mAh g^?1 at a current density of 100 mA g^?1 after 100 cycles. Besides improved rate performance of 117 mAh g^?1 at a high current density of 2000 mA g^?1 and excellent cycling stability with only about 0.008% capacity loss per cycle were also obtained in the sample TiO₂@C6 after 500 cycles at the current density of 1000 mA g^?1. Such remarkable performance may be ascribed to the unique one‐dimensional nanofibers as flexible carbon matrix.     

Simple solution-combustion synthesis of Fe2TiO5 nanomaterials with enhanced lithium storage properties

The porous Fe₂TiO₅ particles are successfully synthesized through a facile one step solution combustion method. The Fe₂TiO₅ negative materials exhibit remarkable electrochemical performance with discharge capacities of 371.4?mAh g^?1 at the 100 th cycle, and display promising rate stability with discharge capacities 76.6?mAh·g^?1 at a high current density of 3.2?A?g^?1. In addition, the mechanism of electrochemistry reaction is illustrated by the CV, raman and EIS measurements, the irreversible capacity mainly causes from the irreversible lithium insertion at 1.8?V. The results indicate that the one step solution combustion synthesis of porous Fe₂TiO₅ is a promising strategy for developing low-cost and high-performance Ti-based negative materials.     

Binder-free multilayered SnO2/graphene on Ni foam as a high-performance lithium ion batteries anode

The reasonable structure construction of electrode materials with superior performance is desired for the new generation lithium ion batteries (LIBs). Herein, binder-free multilayered SnO₂/graphene (GN) on Ni foam was fabricated via a dip coating method. SnO₂ nanoparticles and GN were alternatively coated on Ni foam to form a sandwich-like structure. The wrapping of GN can raise the conductivity and keep the structural integrality of the binder-free material, preventing structure collapse arised from the volume expansion of SnO₂. Benefiting from the porous Ni foam framework and sandwich-like structure, the SnO₂/GN composite exhibited good rate performance and excellent cycle stability. High capacities of 708 and 609?mAh?g^?1 were achieved at rates of 1 and 2?A?g^?1. Besides, the SnO₂/GN electrode delivered a high capacity of 757?mAh?g^?1 after 500 cycles at 1?A?g^?1.     

Synthesis of few-layered Ti3C2Tx/ WO3 nanorods foam composite material for NO2 gas sensing at low temperature

The few-layered Ti₃C₂T_x/WO₃ nanorods foam composite material was synthesized by electrostatic self-assembly and bidirectional freeze-drying technologies. The phase structure and microstructure of synthesized samples was characterized by XRD, FESEM, TEM and their gas sensing properties estimated via a self-designed equipment with four test channels. The results demonstrate WO₃ nanorods were successfully anchored on the surface and between layers of few-layered Ti₃C₂T_x MXene by electrostatic self-assembly strategy and the composite material simultaneously has a low-density foam morphology by means of bidirectional freeze-drying processes. There exists a typical heterostructure at the interfaces owing to the inseparable contact between the few-layered Ti₃C₂T_x MXene and WO₃ nanorods. Compared with the original WO₃ nanorods, the few-layered Ti₃C₂T_x/WO₃ nanorods foam composite material displays excellent gas sensing properties for NO₂ detection at low temperature, in particular the optimal value of gas sensing response (R_g/R_a) reaches to 89.46 toward 20 ppm NO₂ at 200 °C. The gas sensing mechanism was also discussed. The increase of gas sensitivity is attributed to a fact that during the reaction process of gas sensing, the excellent conductivity of the few-layered Ti₃C₂T_x MXene provided faster transport channels of free carriers, and the heterojunctions formed by few-layered Ti₃C₂T_x MXene and WO₃ nanorods enhanced the carriers separation efficiency. Meanwhile, the low-density layered structure of few-layered Ti₃C₂T_x/WO₃ nanorods foam composite material provides convenient diffusion paths for gas molecules to the surface of WO₃ nanorods.     

A fast approach to the synthesis of MO/CNT/Fe hybrid nanostructures built on MXene for enhanced Li-ion uptake

We report herein a fast and scalable approach to the synthesis of MO/CNT/Fe (MCI) hybrid nanostructures via microwave irradiation of MXene under ambient condition. The effect of three arcing materials, CNT, graphite (C), and carbon fiber (C_f), on the growth of carbon nanotubes on MXene-derived metal oxides were investigated. The resulted MCI nanostructures were tested as anodes in LIBs, all exhibiting better electrochemical performance than that of pristine Ti₃C₂. Remarkably, MCI-C_f delivered reversible capacities of 430?mA?h?g^?1 and 175?mA?h?g^?1 at 1?A?g^?1 and 10?A?g^?1, respectively, which is much higher than that of commercial graphite at high rates. The findings in this work open new exciting opportunities to developing hybrid electrode materials with high specific capacity for energy conversion and storage.     

Mesoporous polyaniline or polypyrrole/anatase TiO2 nanocomposite as anode materials for lithium-ion batteries

A functional composite as anode materials for lithium-ion batteries, which contains highly dispersed TiO₂ nanocrystals in polyaniline matrix and well-defined mesopores, is fabricated by employing a novel one-step approach. The as-prepared mesoporous polyaniline/anatase TiO₂ nanocomposite has a high specific surface area of 224 m² g⁻¹ and a predominant pore size of 3.6 nm. The electrochemical performance of the as-prepared composite as anode material is investigated by cyclic voltammograms and galvanostatic method. The results demonstrate that the polyaniline/anatase nanocomposite provides larger initial discharge capacity of 233 mAh g⁻¹ and good cycle stability at the high current density of 2000 mA g⁻¹. After 70th cycles, the discharge capacity is maintained at 140 mAh g⁻¹. The excellent electrochemical performance of the polyaniline/TiO₂ nanocomposite is mainly attributed to its special structure. Furthermore, it is accessible to extend the novel strategy to other polymer/TiO₂ composites, and the mesoporous polypyrrole/anatase TiO₂ is also successfully fabricated.     

Synthesis and enhanced photocatalytic activity of Mn/TiO2 mesoporous materials using the impregnation method through CVC process

TiO₂ particles were prepared by chemical vapor condensation and used to synthesize MnO_x/TiO₂ mesoporous materials by impregnation. The Mn-doped TiO₂ particles were smaller (8.5?nm vs. 10.5?nm) and had greater surface areas (203.7?m²?g^?1 vs. 134.4?m²?g^?1) than undoped particles. They were also smaller and had a greater surface area than similarly doped commercial P25, indicating highly dispersed Mn species on the surfaces of the crystalline TiO₂. The resulting materials?? photocatalytic activities towards methylene blue decomposition were compared: the synthesized TiO₂ particles with MnO₂ showed higher photocatalytic activity than the similarly doped commercial P25.     

Waste cotton Fabric/MXene composite aerogel with heat generation and insulation for efficient electromagnetic interference shielding

Electromagnetic interference (EMI) shielding materials have become more and more indispensable due to serious electromagnetic-radiation pollution. Herein, waste cotton cellulose aerogels were prepared by dissolving waste cotton fabrics (WCF) in NaOH/urea aqueous solution, and MXene nanosheets were subsequently deposited on the cellulose aerogels by a facile dip coating method to obtain WCF/MXene composite aerogels. The WCF/MXene composite aerogels with highly porous network structure show remarkable electrical conductivity (8.2 Ω/sq of surface resistance), high EMI shielding effectiveness (EMI SE) in the range of 2–18 GHz (39.3–48.1 dB). The WCF/MXene aerogel possesses high SSE and SSE/t of 677.94–829.74 dB cm³ g^?1 and 3512.62–4299.17 dB cm² g^?1, respectively (2–18 GHz). In addition, the heating temperature of WCF/MXene composite aerogels reaches 199 °C when 3 V positive voltage is applied on them. The WCF/MXene composite aerogels possess excellent electromagnetic shielding effectiveness, heat generation property and insulation, which can be potentially used as multifunctional materials for EMI shielding, electrical-heating and high temperature protection.     

Facile synthesis of hierarchical polycystic iron-nitride/phosphide hybrids microsphere constructed by CNTs for stable and enhanced lithium storage

Diverse Fe-based nitrides and phosphides have drawn considerable attention owing to their abundant source, high theoretical capacities, and environment benignity. However, it still remains a crucial challenge to develop a facile preparation approach of robust Fe-based anode materials for the next-generation durable lithium-ion batteries. Herein, we constructed two type polycystic microsphere anode materials (Fe₂N@C/CNTs and FeP@C/CNTs) through a scalable industrial spray-drying technology combined with following chemical nitridation/phosphorization conversion strategy. Both the resultant Fe₂N@C/CNTs and FeP@C/CNTs materials exhibit unique hierarchical polycystic microsphere structure and improved conductive network caused by the incorporation of amorphous carbon and dense CNTs coating layers. The unique structure merits endow these capabilities of facilitating electrons/ions transport and accommodating notorious volume change during charge-discharge cycling. Consequently, the Fe₂N@C/CNTs and FeP@C/CNTs anode materials deliver enhanced rate capability (216 and 232?mA?h?g^?1, respectively, at a high current density of 5?A?g^?1) and durable cycling stability with reversible capacities of 489 and 571?mA?h?g^?1 at 0.5?A?g^?1 after 500 cycles, respectively. In addition, this work also provides a transplantable preparation strategy for other conversion-type anode materials with poor electrical conductivity and large volume effect.     

Synthesis of dandelion-like V2O3/C composite with bicontinuous 3D hierarchical structures as an anode for high performance lithium ion batteries

The dandelion-like V₂O₃/C composite was synthesized by a simple and facile template-free solvothermal method followed by a suitable thermal treatment. The dandelion-like V₂O₃/C composite is constructed by bicontinuous 3D hierarchical structures, which are formed by interconnected nanoparticles and interconnected pores, respectively. Moreover, the surface of interconnected nanoparticles is uniformly coated with an ultrathin carbon layer. Upon evaluation as an anode material for LIBs, the as-synthesized product shows superior electrochemical performance. Under the current density of 0.1?A?g^?1, the specific discharge capacity of V₂O₃/C composite is 737?mA?h?g^?1 after 100 cycles. Moreover, after 1000 cycles at a high current density of 2?A?g^?1, the sample exhibits a discharge capacity of 315?mA?h?g^?1 which is 94% of the first-cycle discharge capacity. This excellent electrochemical performance can be ascribed to its unique hierarchical structure with 3D interconnected nanopores and uniform carbon coating.     

Carbon-coated Bi5Nb3O15 as anode material in rechargeable batteries for enhanced lithium storage

Bismuth can alloy with lithium to generate Li₃Bi with the volumetric capacity of about 3765 mAh cm^?3 (386 mAh g^?1), rendering bismuth-based materials as attractive alloying-type electrode materials for rechargeable batteries. In this work, bismuth-based material Bi₅Nb₃O₁₅ @C is fabricated as anode material through a traditional solid-state reaction with glucose as carbon source. Bi₅Nb₃O₁₅ @C composite is well dispersed, with small particle size of 0.5–2.0?µm. The electrochemical performance of Bi₅Nb₃O₁₅ @C is reinforced by carbon-coated layer as desired. The Bi₅Nb₃O₁₅ @C exhibits a high specific capacity of 338.56 mAh g^?1 at a current density of 100?mA?g^?1. And it also presents an excellent cycling stability with a capacity of 212.06 mAh g^?1 over 100 cycles at 100?mA?g^?1. As a comparison, bulk Bi₅Nb₃O₁₅ without carbon-coating only remains 319.62 mAh g^?1 at 100?mA?g^?1, revealing poor cycle and rate performances. Furthermore, in-situ X-ray diffraction experiments investigate the alloying/dealloying behavior of Bi₅Nb₃O₁₅ @C. These insights will benefit the discovery of novel anode materials for lithium-ion batteries.     

Strategy for improving the capacity and rate performance of LiNixCoyMn1−x−y electrode using Ti3C2Tx MXene additives

With the expanding range of applications for lithium-ion batteries, a great deal of research is being conducted to improve their capacity, stability, and charge/discharge rates. This study was performed to investigate the effects of MXene, which has a large surface area and metallic conductivity, as a conductive additive to the cathode, on electrochemical performance. The two-dimensional material MXene constructs a conductive network with zero-dimensional carbon black in plane-to-point mode to improve conductivity and contact area with active materials, thereby facilitating fast charge transfer. The conductive network reduces the internal resistance and polarization of the cathode and aids the diffusion of electrons. The electrode containing an appropriate amount of MXene showed improved rate performance, high discharge capacity (123.9 mAh g⁻¹ at 4 C), and excellent cycle stability at a high scan rate (125.8 mAh g⁻¹ at 2 C after 150 cycles) compared to pristine electrodes. Based on these results, Ti₃C₂T_x MXene is a promising conductive additive in the battery field.     

Durable and highly sensitive flexible sensors for wearable electronic devices with PDMS-MXene/TPU composite films

MXenes, as two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides, have very excellent electrical properties and surface activity and are increasingly used in supercapacitors, batteries, electromagnetic interference shielding, and composite materials. Still, the poor stability of MXene when exposed to aqueous oxygen and the poor ability to interact with the polymer matrix have become important factors limiting its’ practical applications. To enhance stability, highly conductive and stretchable Ti₃C₂MXene/TPU sensing elements were prepared by a simple spraying process using thermoplastic polyurethane (TPU) as a substrate, and the sensing elements were encapsulated by polydimethylsiloxane (PDMS) to obtain MXene-TPU/PDMS constructed flexible strain sensors with excellent performance. This strain sensor features low detection limits (less than 0.005%, 0.5 μm), a wide sensing range (0–90%), a short response time (120.1 ms), and excellent durability (>3000 cycles). This strain sensor can be applied to a range of applications such as health detection, motion signals, detection of robot movements, and wearable electronic devices.     

Microwave-assisted one-pot synthesis of SnC2O4/graphene composite anode material for lithium-ion batteries

Currently, SnC₂O₄ is considered as one of the most promising anode materials for high-energy lithium-ion batteries (LIBs) because its charge capacity is higher than that of metal oxides. Herein, a facile microwave-assisted solvothermal method was employed to obtain SnC₂O₄/GO composites within only 30?min, which is time-efficient. The amount of SnC₂O₄ was increased to 95.3?wt% to improve the capacity of the composite. Pure SnC₂O₄ with a high specific surface area of 19.6?m² g^?1 without any other tin compound was used for fabrication. The SnC₂O₄/GO composite exhibited excellent electrochemical performance, with reversible discharge/charge capacity of 657/659?mA?h?g^?1 after 100 cycles at 0.2?A?g^?1. Furthermore, at high current densities of 1.0 and 2.0?A?g^?1, the SnC₂O₄/GO composite anode exhibited high reversible discharge/charge capacities of 553/552 and 418/414?mA?h?g^?1, respectively, after 200 cycles at room temperature. These improvements were likely obtained because SnC₂O₄ was well composited with graphene, which not only offered rapid electron transfer but also released the tension produced by the volumetric effect during repeated lithiation/delithiation. Cyclic voltammetry (CV) was also performed to further study the electrochemical reactions of SnC₂O₄/GO. The facile microwave-assisted solvothermal method used herein is considered as a highly efficient method to fabricate metal oxalate/graphene composites for use as anode materials in LIBs.     

FeS@onion-like carbon nanocapsules embedded in amorphous carbon for the lithium ion batteries with excellent cycling stability

The development of lithium ion battery with long-term cycle stability is considered to be a prerequisite for commercialization. Onion-like carbon coated FeS nanocapsules embedded in amorphous carbon (FeS@OLC/a-C) is designed and one-step developed via discharging the Fe-C composite ingot under the atmosphere of Ar and H₂S. In FeS@OLC/a-C nanocomposites, ~ 8.9?nm FeS@OLC nanocapsules with an average onion-like shell of 2?nm are covered by the amorphous carbon. The formation mechanism has been proposed for FeS@OLC/a-C nanocomposites. As the lithium ion battery anode candidate, FeS@OLC/a-C nanocomposite electrode have the advantages of good cycling stability (719.2 mAh g^?1 after being cycled at 0.1?A?g^?1 for 200 times) and excellent high-rate performances (569.3 mAh g^?1 for 2?A?g^?1, 540.9 mAh g^?1 for 4?A?g^?1, 466.6 mAh g^?1 for 8?A?g^?1 and 340.0 mAh g^?1 for 16?A?g^?1), which originates from the combined effect of small FeS nanoparticles, the onion-like carbon layers and amorphous carbon. The design idea in this paper provides a new approach for improving the cycling stability and rate capability of lithium ion battery.     

Ultrathin CeO2 coating for improved cycling and rate performance of Ni-rich layered LiNi0.7Co0.2Mn0.1O2 cathode materials

In this study, we have successfully coated the CeO₂ nanoparticles (CeONPs) layer onto the surface of the Ni-rich layered LiNi_0.7Co_0.2Mn_0.1O₂ cathode materials by a wet chemical method, which can effectively improve the structural stability of electrode. The X-ray powder diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS) are used to determine the structure, morphology, elemental composition and electronic state of pristine and surface modified LiNi_0.7Co_0.2Mn_0.1O₂. The electrochemical testing indicates that the 0.3?mol% CeO₂-coated LiNi_0.7Co_0.2Mn_0.1O₂ demonstrates excellent cycling capability and rate performance, the discharge specific capacity is 161.7?mA?h?g^?1 with the capacity retention of 86.42% after 100 cycles at a current rate of 0.5?C, compared to 135.7?mA?h?g^?1 and 70.64% for bare LiNi_0.7Co_0.2Mn_0.1O₂, respectively. Even at 5?C, the discharge specific capacity is still up to 137.1?mA?h?g^?1 with the capacity retention of 69.0%, while the NCM only delivers 95.5?mA?h?g^?1 with the capacity retention of 46.6%. The outstanding electrochemical performance is assigned to the excellent oxidation capacity of CeO₂ which can oxidize Ni²⁺ to Ni³⁺ and Mn³⁺ to Mn⁴⁺ with the result that suppress the occurrence of Li⁺/Ni²⁺ mixing and phase transmission. Furthermore, CeO₂ coating layer can protect the structure to avoid the occurrence of side reaction. The CeO₂-coated composite with enhanced structural stability, cycling capability and rate performance is a promising cathode material candidate for lithium-ion battery.     

Roll-to-roll processable MXene-rGO-PVA composite films with enhanced mechanical properties and environmental stability for electromagnetic interference shielding

MXene films promise potential electromagnetic interference (EMI) shielding materials, but poor scalable processability, environmental instability, and weak mechanical properties severely restrict their applications. Herein, we engineer the large-area, high-performance, and compact nacre-like MXene-based composite films through cooperative co-assembly of Ti₃C₂T_X MXene and reduced graphene oxide (rGO) in the presence of polyvinyl alcohol (PVA). The resulting MXene-rGO-PVA composite films benefit from enhanced bonding strength and extra chain bridging effect of linear PVA molecules enriched with hydroxyl groups. Therefore, the composite film achieves high tensile strength (～238 MPa) and toughness (～1.72 MJ m^?3) while having high conductivity of ～32 S cm^?1. A significant EMI shielding effectiveness (41.35 dB) is also demonstrated, with an excellent absolute shielding effectiveness of ～20,200 dB cm² g^?1 at only 12-μm thickness. Moreover, due to the synergistic effect of multiple components, the composite films maintain a stable EMI shielding performance in harsh environments (sonication, hot/cold annealing, and acid solution) with mechanical properties that fluctuate only within 10% compared to the original film. More importantly, commercial polyethylene terephthalate release liner can be applied for the film coating, facilitating continuous roll-to-roll production of large-area films and future applications.     

Exceptional supercapacitive performance of bicontinuous carbon/MnO2 composite electrodes

A new type of porous carbon/MnO₂ composites, having bicontinuous structures, i.e., continuous channels and carbon skeletons, was prepared using a phase separation method, followed by a carbonization procedure and a subsequent redox reaction. In this work, such composite electrodes show a high specific capacitance of ca. 260?F?g^?1 at 0.5?A?g^?1 in 1?M Na₂SO₄ aqueous solution, a superior cycling stability (~80% retention after 2000 cycles) and a distinctive high-rate performance. Especially, unique bicontinuous structures endow such composites with a great specific capacitance of the constituent MnO₂ (~1100?F?g^?1), very close to the theoretical value. These excellent electrochemical behaviors may render this material a promising candidate as high-performance electrodes in supercapacitors. Therefore, our findings suggest that the strategy for constructing bicontinuous hybrid electrodes represents an exciting direction for designing next-generation supercapacitors.