Large-scale synthesis of methyl cis-9, trans-11-octadecadienoate from methyl ricinoleate

The conjugated linoleic acid methyl cis-9,trans-11-octadecadienoate has been prepared on a large scale from methyl ricinoleate. Methyl ricinoleate was purified from castor esters by a partition method. It was converted to the mesylate, which was reacted with a base (1,8-diazabicyclo[5,4,0]-undec-7-ene) to give a product that contained 66% of the desired ester. Two urea crystallizations produced a product containing 83% methyl cis-9,trans-11-octadecadienoate, the identity of which was confirmed by gas chromatography linked to mass spectrometry and by Fourier transform infrared spectroscopy. The remaining impurities were methyl cis-9,cis-11- and cis-9-,trans-12-octadecadienoate.     

A simple method of preparation of methyl trans-10,cis-12- and cis-9,trans-11-octadecadienoates from methyl linoleate

Pure conjugated isomers of linoleic acid were prepared on a large scale by alkali-isomerization of purified methyl linoleate. The methyl esters of alkali-isomerized linoleic acid contained mainly the methyl cis-9,trans-11- and trans-10,cis-12-octadecadienoates (44 and 47%, respectively). These two isomers were then separated and purified by a series of low-temperature crystallizations from acetone. The isomeric purity obtained for the cis-9,trans-11-octadecadienoate isomer was >90% and that of the trans-10,cis-12-octadecadienoate isomer was 89 to 97%. The isolated yield of the two isomers corresponded to 18 and 25.7%, respectively, of the starting material. The structure of the two isomers was confirmed using partial hydrazine reduction, silver nitrate-thin-layer chromatography of the resulting monoenes and gas chromatography coupled with mass spectrometry of the 4,4-dimethyloxazoline derivatives. Fourier transform infrared spectroscopy of the monoenes gave the confirmation of the geometry of each double bond.     

Autoxidation of the furan fatty acid ester, methyl 9,12-epoxyoctadeca-9,11-dienoate

The objective of this study was to identify autoxidation products of methyl 9,12-epoxyoctadeca-9,11-dienoate (F_9,12). Previous work has shown that F_9,12 is a product both of autoxidation and singlet oxygen oxidation of the methyl ester derivative of conjugated linoleic acid (CLA). F_9,12, 95% pure, was synthesized from methyl ricinoleate. The synthetic F_9,12 was heated at 50°C in sealed tubes containing air. Each tube contained 6 mg F_9,12 and 1 mg methyl stearate as an internal standard. Samples were taken at 4.5, 7, 23, 46.5, 69.5, and 93 h. The oxidized F_9,12 was dissolved in isooctane and analyzed by gas chromatography (GC), GC-direct deposition-Fourier transform infrared spectroscopy, and GC-electron ionization mass spectrometry. CLA methyl ester was oxidized in a similar manner. Under these conditions, the half-lives of CLA and F_9,12 were 40 and 35 h, respectively. Oxidation products of F_9,12 that were identified included: 5-hexyl-2-furaldehyde (I), methyl 8-oxooctanoate (II), methyl 13-oxo-9,12-epoxytrideca-9,11-dienoate (III), methyl 8-oxo-9,12-epoxy-9,11-octadecadienoate (IV), and methyl 13-oxo-9,12-epoxy-9,11-octadecadienoate (V).     

Epoxidation of a conjugated linoleic acid isomer

Epoxidation of methyl (9Z, 11E)‐octadecadienoate ( 1 ) with various epoxidizing agents viz. m‐chloroperoxybenzoic acid, dimethyl dioxirane, methyltrioxorhenium/hydrogen peroxide, potassium peroxomonosulfate (Oxone, 2KHSO₅ · KHSO₄ · K₂SO₄)/tetrahydrothiopyran‐4‐one, and Novozyme 435/hydrogen peroxide is described. The reactions furnished the corresponding mono‐epoxy [methyl (11, 12E)‐epoxy‐(9Z)‐octadecenoate ( 2 ) and methyl (9, 10Z)‐epoxy‐(11E)‐octadecenoate ( 3 )] and a mixture of diastereomers of syn‐ and anti‐diepoxy‐stearate [methyl (9, 10Z;11, 12E)‐diepoxystearate ( 4a‐4d )], which were identified by a combination of spectroscopic and spectrometric analyses.     

有机介质中包衣菌体催化合成cis9,trans11- 共轭亚油酸

以三种脂肪醇正辛醇、月桂醇和肉豆蔻醇为原料，合成得到三种谷氨酸二烷基酯核糖醇（2C8GE、2C12GE和2C14GE），比较了不同谷氨酸二烷基酯核糖醇及其浓度和所用溶剂，以及缓冲液pH、包衣时间、温度和干燥方式对包衣Lactobacillus helveticus L7菌体酶活的影响。确定了制备包衣菌体的条件为：表面活性剂为谷氨酸二十二烷基酯核糖醇(2C12GE)，配制成质量百分比1.0%（w/w）的丙酮溶液；菌体用pH5.8的磷酸盐缓冲液重悬；在4℃下处理4 h经冷冻干燥而成。在以亚油酸为底物时包衣菌体中亚油酸异构酶的Km为35.7 mM，Vmax为5.6 mM/h。经包衣处理后，菌体中亚油酸异构酶和底物的亲和力有所降低。     

Dimer acid structures. The thermal dimer of normal linoleate,methyl 9-cis, 12-cis octadecadienoate

The thermal dimer (290C) of normal methyl linoleate and its hydrogenated form have been examined by mass spectrometry. Parent mass peaks of the hydrogenated dimer show the presence of monocyclic, bicyclic, and tricyclic structures. The monocyclic structure is formed via the conjugation-Diels-Alder mechanism. The bicyclic structure is best explained by an extension of the hydrogen transfer free radical coupling mechanism. The noncyclic dehydrodimer resulting from free radical coupling undergoes a relatively rapid intramolecular cyclization to a bicyclic structure, probably by an interval Diels-Alder reaction. A model noncyclic dehydro-linoleate dimer was shown to give a bicyclic dimer as the predominant structure under thermal dimerization conditions. The tricyclic dimer may result from intramolecular alkylation of the bicyclic structures. Presented at the AOCS Meeting, Philadelphia, October 1966. Journal Series No. 450, General Mills Research Laboratories.     

1，2，3，4－丁烷四羧酸二酐的制备

本文从一般原料出发，经过三步合成出１，２，３，４－丁烷四羧酸二酐。它被广泛用作聚酚亚胺材料的单体，国内尚无市售，经元素分析，熔点，ＩＲ，ＮＭＲ表征，表明结果与预期产物相符。合成步骤简单，原料易得。     

Countercurrent approach to the enrichment of Δ9c,11t-and Δ10t,12c-18:2 isomers by urea complexation

CLA refers to a group of geometrical and positional isomers of linoleic acid. CLA has been shown to have potentially beneficial effects on cancer, atherosclerosis, and body metabolism in animals. Mixtures containing equal amounts of these isomers are commonly used in many research studies because of their greater availability and lower cost relative to pure isomers. This has hindered progress in elucidating the biological properties of specific isomers and their relevance in animal and human biology. A method was developed that offers a compromise between cost and utility to make available enriched mixtures of either the Δ9c,11t- or Δ10t,12c-18:2 isomers for use in a wide range of experimental applications. A countercurrent approach was developed to separate the Δ9c,11t- and Δ10t,12c-18:2 isomers from an equal mixture of these two isomers by urea complexation. After three successive rounds of complexation using an equal amount of CLA and urea, a fraction enriched in Δ9c,11t-18:2 containing 42.5 and 17.4% of Δ9c,11t-and Δ10t,12c-18:2, respectively, was recovered. After a single round of complexation using 2.5 g urea/g CLA, a fraction enriched in Δ10t,12c-18:2 was recovered containing 29.7 and 69.1% of Δ9c,11t- and Δ10t,12c-18:2, respectively.     

The Production of an Experimental Table Margarine Enriched with Conjugated Linoleic Acid (CLA): Physical Properties

Even though conjugated linoleic acid (CLA) is known to have some beneficial effects on the human body, its consumption has decreased over the past 20 years due to the replacement of animal fats by vegetable oils. In this study, using the structured lipid (SL) containing CLA, an experimental table margarine enriched with CLA was produced and stored for 3 months at two temperatures prior to performing the relevant analyses. The GC results showed that the margarine fat had 10.6% CLA. The solid fat content was the highest in week 0 in all samples, which then decreased during storage but the hardness increased. An increment in dropping point was also observed in the samples. In week 0, all the samples had the β′ crystal as the predominant crystal form but a crystal transformation from β′ to β was observed during storage.     

Enantioselective formation of an α, β-epoxy alcohol by reaction of methyl 13(S)-hydroperoxy-9(Z), 11(E)-octadecadienoate with titanium isopropoxide

Methyl 11(R), 12(R)-epoxy-13(S)-hydroxy-9(Z)-octadecenoate (threo isomer) was generated from linoleic acid by the sequential action of an enzyme and two chemical reagents. Linoleic acid was treated with lipoxygenase to yield its corresponding hydroperoxide [13(S)-hydroperoxy-9(Z), 11(E)-octadecadienoic acid]. After methylation with CH₂N₂, the hydroperoxide was treated with titanium (IV) isopropoxide [Ti(O-i-Pr)₄] at 5°C for 1 h. The products were separated by normal-phase high-performance liquid chromatography and characterized with gas chromatography-mass spectrometry, infrared spectroscopy, and nuclear magnetic resonance spectroscopy. Approximately 30% of the product was methyl 13(S)-hydroxy-9(Z), 11(E)-octadecadienoate. Over 60% of the isolated product was methyl 11(R), 12(R)-epoxy-13(S)-hydroxy-9(Z)-octadecenoate. After quenching Ti(O-i-Pr)₄ with water, the spent catalyst could be removed from the fatty products by partitioning between CH₂Cl₂ and water. These results demonstrate that Ti(O-i-Pr)₄ selectively promotes the formation of an α-epoxide with the threo configuration. It was critically important to start with dry methyl 13(S)-hydroperoxy-9(Z),11(E)-octadecadienoate because the presence of small amounts of water in the reaction medium resulted in the complete hydrolysis of epoxy alcohol to trihydroxy products.     

CLA TAG rich in cis‐9,trans‐11‐CLA is stable beyond 2 years of proper storage

We analyzed a triacylgylcerol esterified CLA preparation characteristically rich in c9,t11‐CLA and free of t10,c12‐CLA three times within a period of 2${1 \over 2}$ years by GC and silver ion‐HPLC. For the first time, we present data on the long‐term stability of this preparation with regard to the fatty acid profile and the isomeric composition of CLA under certain storage conditions, providing useful information for the planning of long‐term trials.     

纳米固体超强酸SO42-/ZnO-Fe2O3的制备及其催化合成苯甲酸乙酯的研究

采用沉淀法合成了纳米固体超强酸SO42-/ZnO-Fe2O3,考察了该催化剂在苯甲酸乙酯合成中的催化活性,试验了催化剂用量和反应时间对酯化反应收率的影响,在优化条件下苯甲酸乙酯的收率达到71.2%。     

Modified hydrothermal treatment route for high-yield preparation of nanosized ZrO2

Nanosized ZrO₂ particles are applied in high-performance thermal barrier coatings and catalyst carriers. To synthesize nanosized zirconia, precipitation from aqueous solutions followed by hydrothermal treatment is widely conducted. In this work, a modified hydrothermal treatment route is described for high-yield fabrication of well-dispersible nanosized t–ZrO₂. Zirconium oxychloride and sodium hydroxide were used as the precursor and precipitant, respectively. N, N-bis(2-hydroxyethyl) glycine (bicine) was used as surface stabilizer to inhibit the early agglomeration of nuclei, and ultrasonication was used to enhance the dispersion of ZrO₂ nanocrystals. The hydrothermal treatment was optimized for reaction temperature, time, fill fraction, and solid content. The synthesized zirconia was characterized using X-ray diffraction, dynamic light scattering, field emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM). The yield of zirconia increased to 134 g/L after hydrothermal. Tetragonal ZrO₂ obtained with hydrothermal treatment at 200 °C for 8 h at a fill fraction of 80% has a good dispersibility, with an average particle size of 20 nm and a narrow size distribution.     

Consumption of c9,t11-18:2 or t10,c12-18:2 enriched dietary supplements does not influence milk macronutrients in healthy, lactating women

Substantial research suggests that the t10,c12–18:2, but not the c9,t11–18:2, isomer of conjugated linoleic acid (CLA) reduces milk fat synthesis in lactating bovine and rodent species. Because fat is the major energy-yielding component in human milk, we were interested in whether this is true for women as well. Thus, the effects of c9,t11–18:2 and t10,c12–18:2 on milk fat were examined in breast-feeding women (n = 12) in a double-blind, placebo-controlled, crossover study with latin-square design. The study was divided into six periods: baseline (3 days), three intervention periods (5 days each), and two washout periods (9 days each). During each intervention period, women consumed 750 mg/day of a supplement containing predominantly c9,t11–18:2, t10,c12–18:2, or 18:1 (olive oil placebo). Milk was collected by complete breast expression on the final day of each period. Infant milk consumption was estimated by 24 h weighing on the penultimate day of each intervention and washout period, and maternal adiposity (% body fat) was determined at baseline using dual energy X-ray absorptiometry. Milk c9,t11–18:2 and t10,c12–18:2 concentrations were greater (P < 0.05) during the corresponding CLA treatment periods as compared to the placebo period, providing strong evidence of subject compliance. Both CLA isomers were transferred into milk fat at relatively high efficiency; average transfer efficiency was estimated to be 23.3%. Compared to the placebo treatment, milk fat content was not reduced during either CLA treatment. Data indicate that body fatness did not modify any putative effect of isomeric CLA consumption on milk fat concentration. The evidence from this study suggests that the sensitivity of lactating women’s mammary tissue to an anti-lipogenic effect of the t10,c12–18:2 isoform of CLA may be less than previously hypothesized.     

Syntheses of pure (9Z, 11Z), (9E, 11E), (9E, 11Z), and (9Z,11E)-9,11-hexadecadienals-possible candidate pheromones

The title compounds were prepared by six different routes, and recommendations are given for the more convenient procedures in laboratory-scale syntheses. Modifications in the literature preparations of the 9E,11E and 9E,11Z isomers are described. Baseline separation of a prepared mixture of all four isomers of the (9Z, 11Z), (9E, 11E), (9E, 11Z), and (9Z, 11E)-9,11-hexadecadienals was achieved using GC methods with standard capillary columns. [¹³C]NMR spectroscopy of the alkene carbon atoms clearly differentiates between theZ,Z, E,E and eitherE,Z orZ,E isomers of the precursor dienols and thus of the dienals.     

10-(异丙基-2-醇)-9,10-二氢-9-氧杂-10-膦杂菲-10-氧化物的合成

以9,10-二氢-9-氧杂-10-膦杂菲-10-氧化物(DOPO)和丙酮为原料,合成10-(异丙基-2-醇)-9,10-二氢-9-氧杂-10-膦杂菲-10-氧化物。考察了原料摩尔比、反应温度和反应时间对产物收率的影响。结果表明,较优工艺条件为:n(丙酮)∶n(DOPO)=12∶1,反应温度为50℃,反应时间为30 min时,DOPO的转化率为99%,目标产物收率为90%。     

The preparation of high-surface area, thermally-stable, metal-oxide catalysts and supports by a cellulose templating approach

A simple and convenient templating approach for the preparation of metal-oxide catalysts and supports has been studied. The method, based on the absorption of an aqueous solution of metal salts by cellulose material, followed by drying and combustion of the organic matrix, leads to the formation of high-surface area mesoporous materials with unusually high thermal stability. Examples include Ce–Zr mixed oxides (BET surface areas of 90–130 m²/g after calcination at 800°C for 2 h; 21–30 m²/g after 12 h at 1050°C) and La-stabilized alumina (BET surface areas of 275–320 m²/g after calcination at 800°C for 2 h, 88–141 m²/g after 12 h at 1050°C). The pore-size distribution, morphology, and the effect of preparation parameters on surface area are discussed.     

Lipase-mediated acidolysis of tristearin with CLA in a packed-bed reactor: A kinetic study

Solvent-free acidolysis of tristearin with CLA has been carried out in a packed-bed reactor. An immobilized lipase from Thermomyces lanuginosa (Lipozyme TL IM) was employed as the biocatalyst. Elevated temperatures (75°C) were utilized to eliminate solid substrates. The reaction kinetics were modeled by using a rate equation of the general Michaelis-Menten form. Both the extent of incorporation of CLA and the extent to which FFA were released were investigated. Positional analysis of the purified TAG obtained after a pseudo space time of 0.6 h indicated that CLA was preferentially incorporated at the sn-1,3 positions of the glycerol backbone, although 10% of the sn-2 positions were occupied by CLA residues. At a pseudo space time of 0.6 h, 38% of the initial CLA was incorporated in acylglycerols; the associated extent of hydrolysis was 8.3%.     

Effect of temperature on linolenic acid loss and 18:3 Δ9-cis, Δ12-cis, Δ15-trans formation in soybean oil

Oil was extracted from soybeans, degummed, alkalirefined and bleached. The oil was heated at 160, 180, 200, 220 and 240°C for up to 156 h. Fatty acid methyl esters were prepared by boron trifluoride-catalyzed transesterification. Gas-liquid chromatography with a cyanopropyl CPSil88 column was used to separate and quantitate fatty acid methyl esters. Fatty acids were identified by comparison of retention times with standards and were calculated as area % and mg/g oil based on 17:0 internal standard. The rates of 18:3ω3 loss and 18:3 Δ9-cis, Δ12-cis, Δ15-trans (18:3c,c,t) formation were determined, and the activation energies were calculated from Arrhenius plots. Freshly prepared soy oil had 10.1% 18:3ω3 and no detectable 18:3c,c,t. Loss of 18:3ω3 followed apparent first-order kinetics. The first-order rate constants ranged from .0018±.00014 min⁻¹ at 160°C to .083±.0033 min⁻¹ at 240°C. The formation of 18:3c,c,t did not follow simple kinetics, and initial rates were estimated. The initial rates (mg per g oil per h) of 18:3c,c,t formation ranged from 0.0031±0.0006 at 160°C to 2.4±.24 at 240°C. The Arrhenius activation energy for 18:3ω3 loss was 82.1±7.2 kJ mol⁻¹. The apparent Arrhenius activation energy for 18:3c,c,t formation was 146.0±13.0 kJ mol⁻¹. The results indicate that small differences in heating temperature can have a profound affect on 18:3c,c,t formation. Selection of appropriate deodorization conditions could limit the amount of 18:3c,c,t produced.     

Epoxidation of methyl linoleate. II. The two isomers of methyl 9, 10: 12, 13-diepoxystearate

Epoxidation of methyl linoleate results in the formation of two stereoisomeric methyl 9,10:12,13-diepoxystearates. The previously well-known isomer, mp 32C, represents only 60% of the total diepoxides formed. The newly isolated form is liquid at room temperature and is measured incompletely by standard titrimetric oxirane analysis. The isomers differ by the relative positions of their oxirane oxygen atoms. The oxygens of the solid are located on opposite sides and those of the liquid are on the same side of the molecular plane. E. Utiliz. Res. Devel. Div., ARS, USDA.