共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
3.
利用模拟软件SRIM2008计算了质子辐射对铌酸锂多功能集成光路器件(MIOC)的影响,结合质子辐射效应地面模拟试验的结果,分析比较了不同的质子辐射能量和注量对多功能集成光路器件的影响,给出了多功能集成光路器件质子辐射试验的数据和分析,讨论了多功能集成光路器件抗质子辐射的能力。 相似文献
4.
5.
6.
李宝军 《激光与光电子学进展》2009,46(2)
控制光信号在亚波长或纳米尺度的波导巾传输对实现超紧凑的光子学器件和高密集的集成光路十分重要,因为它代表着集成光学向集成纳米光子学的迈进.人们已用光刻技术制作出基于金属材料的表面等离子体纳米波导、基于平面介质材料的纳米光子线波导、光了晶体波导等,也通过自组装等方法或技术制作出基于半导体材料或有机聚合物材料的纳米结构等.聚合物纳米线由于具有良好的机械性能,尤其是其弹性和柔韧性非常好,而且可以通过化学设计改变其材料的特性.因而,是构筑超紧凑光子学器件和微型化集成光路的最佳选择之一.借助化学合成法、激光烧蚀法、静电纺丝法、微纳吸管法、近场探针拉制法、尖端阵列法等制作出的各种聚合物纳米纤维也有报道. 相似文献
7.
8.
9.
10.
11.
An X. Geib K.M. Hafich M.J. Beyette F.R. Jr. Field S.A. Robinson G.Y. Wilmsen C.W. 《Photonics Technology Letters, IEEE》1993,5(5):545-548
An integrated optoelectronic device with a single-mesa structure, which functions as an optical set-reset memory or an optical inverter, is reported. The device is composed of two heterojunction phototransistors and a light-emitting diode vertically integrated on an InGaAsP/InGaAs/InP wafer grown by gas source molecular beam epitaxy. The set and reset beams are incident on a single optical window on each device and are separated by wavelength. The prototype device has shown a large on/off control ratio (27) with relatively low input optical power levels (tens of microwatts). This device concept is extendable to large integrated arrays which are capable of directly processing spatial light signals 相似文献
12.
Noda S. Kobayashi Y. Shibata K. Sasaki A. 《Quantum Electronics, IEEE Journal of》1995,31(8):1465-1473
An optical tristable device with optically controlled set and reset functions is developed. The device structure is a vertical and direct integration of four heterojunction phototransistors (HPTs) and a laser diode (LD). Two HPTS (HPT-A and HPT-B) integrated just above the LD stripe are utilized to achieve the set operation. The internal optical feedback from the LD to the HPTs takes an important role in the operation. On the other hand, another HPT (HPT-C or HPT-D) integrated slightly away from the position for the set operation is used to achieve the reset operation. The optical feedback from the LD to the HPT-A and HPT-B is suppressed by the current bypass through the HPT-C connected to both ends of the LD. Theoretical calculations are also made to explain these operations 相似文献
13.
本文采用光学传输矩阵元的方法设计了一种集成型反射式多量子阱器件,并给出了理论计算结果。采用MOCVD生长方法制作了该器件,它由n型多层增透介质膜、i型多量子阱、p型多层高反射率介质膜所组成。测试了该器件的光电流谱和反射率谱,并与理论结果作了比较,二者附合得很好。这种器件可以发展成兼具调制、开关、双稳复合功能的反射式集成器件。 相似文献
14.
15.
Model GC1312S multifunction integrated optical circuit device (MIOC) used in inertial-grade interferometric fiber optics gyroscopes(IFOGs) is fabricated by annealing and proton exchange process(APE) 。The unique feature of the device is the incorporation of the beat detection circuit besides all the features the conventional single Y-branch multifunction integrated optical circuit devices have.The device structure ,operation principle and typical characteristics, etc, are briefly presented in this paper. 相似文献
16.
Borrise X. Jimenez D. Barniol N. Perez-Murano F. Aymerich X. 《Lightwave Technology, Journal of》2000,18(3):370-374
A scanning near-field optical microscope for the characterization of optical integrated devices has been developed. Compatible with a normal optical characterization setup the experimental setup allows a tapered uncoated optical fiber to scan the optical device with constant height by means of a shear force control using a tuning fork, and to obtain the evanescent field emerging from it. In this way, images showing simultaneously the topography with lateral resolution better than 10 nm and vertical resolution of 1 nm, and the optical field distribution have been obtained. Images obtained over rib waveguides show the guided mode intensity distribution, allowing characterization of the propagation of the light in the device for up to 1 mm. Identification of the guided mode propagation has been achieved by comparing the images with computer simulations. Measurement of the experimental decay lengths of the evanescent field obtained by the microscope allows a determination of the effective refractive index of the structure to be made 相似文献
17.
Measurement and Characterization of Microwave Interaction between Integrated Distributed Feedback Laser Diode and Electro-Absorption Modulator 下载免费PDF全文
Fei Yuan Chao Jing Meng-Ke Wang Shang-Jian Zhang Zhi-Yao Zhang Yong Liu 《电子科技学刊:英文版》2022,20(4):375-382
Integrated electro-absorption-modulated distributed feedback laser diodes (EMLs) are attracting much interest in optical communications for the advantages of a compact structure, low power consumption, and high-speed modulation. In integrated EML, the microwave interaction between the distributed feedback laser diode (DFB-LD) and the electro-absorption modulator (EAM) has a nonnegligible influence on the modulation performance, especially at the high-frequency region. In this paper, integrated EML was investigated as a three-port network with two electrical inputs and a single optical output, where the scattering matrix of the integrated device was theoretically deduced and experimentally measured. Based on the theoretical model and the measured data, the microwave equivalent circuit model of the integrated device was established, from which the microwave interaction between DFB-LD and EAM was successfully extracted. The results reveal that the microwave interaction within integrated EML contains both the electrical isolation and optical coupling. The electrical isolation is bidirectional while the optical coupling is directional, which aggravates the microwave interaction in the direction from DFB-LD to EAM. 相似文献
18.
19.
WEI Song LIU Chang QIN Houyun LIU Yiming CHEN Changming WANG Hongbo ZHAO Yi 《光电子快报》2021,17(10):598-603
In this work, the light coupling efficiency of organic light-emitting diode (OLED) and polymer optical waveguide integrated device was improved by the grating coupler. To maximize light coupling efficiency, the grating coupler was optimized by finite-difference time-domain (FDTD) method. Based on the simulation results, the grating coupler was fabricated via laser interference lithography process and an OLED was integrated on the surface of it. Comparing the integrated devices without and with grating coupler, light coupling efficiency of the grating-based integrated device was improved by about 5%. The proposed integrated device has the potential application for low-cost and flexible monolithic optical sensors. 相似文献