Conformational changes of purine repressor DNA-binding domain upon complexation with DNA

The purine repressor (PurR) consists of two functional domains: an N-terminal DNA-binding domain and a C-terminal corepressor-binding domain. Recently, the structure of PurR-corepressor-operator ternary complex was determined by X-ray crystallography. In the complex the DNA-binding domain, consisting of 56 amino acids, was composed of four helices. Here, we have determined the solution structure of the DNA-binding domain in its DNA free state by NMR. It consists of three helices and the fourth helix (the hinge helix) region is diordered. The architecture of the first three helices of its DNA free state is very similar to that of its DNA-bound form. The hinge helix is induced by the specific DNA binding and by the dimerization of PurR which is provided by the corepressor-binding domain.     

Escherichia coli purine repressor: key residues for the allosteric transition between active and inactive conformations and for interdomain signaling

The Escherichia coli purine repressor, PurR, exists in an equilibrium between open and closed conformations. Binding of a corepressor, hypoxanthine or guanine, shifts the allosteric equilibrium in favor of the closed conformation and increases the operator DNA binding affinity by 40-fold compared to aporepressor. Glu70 and Trp147 PurR mutations were isolated which perturb the allosteric equilibrium. Three lines of evidence indicate that the allosteric equilibrium of E70A and W147A aporepressors was shifted toward the closed conformation. First, compared to wild-type PurR, these mutant repressors had a 10-30-fold higher corepressor binding affinity. Second, the mutant aporepressors bound to operator DNA with an affinity that is characteristic of the wild-type PurR holorepressor. Third, binding of guanine to wild-type PurR resulted in a near-UV circular dichroism spectral change at 297-305 nm that is attributed to the closed conformation. The circular dichroism spectrum of the E70A aporepressor at 297-305 nm was that expected for the closed conformation, and it was not appreciably altered by corepressor binding. Mutational analysis was used to identify an Arg115-Ser46' interdomain intersubunit hydrogen bond that is necessary for transmitting the allosteric transition in the corepressor binding domain to the DNA binding domain. R115A and S46G PurR mutants were defective in DNA binding in vitro and repressor function in vivo although corepressor binding was identical to the wild type. These results establish that the hydrogen bond between the side chain NH2 of Arg115 and the main chain CO of Ser46' plays a critical role in interdomain signaling.     

Kinetic and thermodynamic studies of purine repressor binding to corepressor and operator DNA

The kinetic and thermodynamic parameters for purine repressor (PurR)-operator and PurR-guanine binding were determined using fluorescence spectroscopy and nitrocellulose filter binding. Operator binding affinity was increased by the presence of guanine as demonstrated previously (Choi, K. Y., Lu, F., and Zalkin, H. (1994) J. Biol. Chem. 269, 24066-24072; Rolfes, R. J., and Zalkin, H. (1990) J. Bacteriol. 172, 5637-5642), and conversely guanine binding affinity was increased by the presence of operator. Guanine enhanced operator affinity by increasing the association rate constant and decreasing the dissociation rate constant for binding. Operator had minimal effect on the association rate constant for guanine binding; however, this DNA decreased the dissociation rate constant for corepressor by approximately 10-fold. Despite significant sequence and structural similarity between PurR and LacI proteins, PurR binds to its corepressor ligand with a lower association rate constant than LacI binds to its inducer ligand. However, the rate constant for PurR-guanine binding to operator is approximately 3-fold higher than for LacI binding to its cognate operator under the same solution conditions. The distinct metabolic roles of the enzymes under regulation by these two repressor proteins provide a rationale for the observed functional differences.     

Hin recombinase bound to DNA: the origin of specificity in major and minor groove interactions

The structure of the 52-amino acid DNA-binding domain of the prokaryotic Hin recombinase, complexed with a DNA recombination half-site, has been solved by x-ray crystallography at 2.3 angstrom resolution. The Hin domain consists of a three-alpha-helix bundle, with the carboxyl-terminal helix inserted into the major groove of DNA, and two flanking extended polypeptide chains that contact bases in the minor groove. The overall structure displays features resembling both a prototypical bacterial helix-turn-helix and the eukaryotic homeodomain, and in many respects is an intermediate between these two DNA-binding motifs. In addition, a new structural motif is seen: the six-amino acid carboxyl-terminal peptide of the Hin domain runs along the minor groove at the edge of the recombination site, with the peptide backbone facing the floor of the groove and side chains extending away toward the exterior. The x-ray structure provides an almost complete explanation for DNA mutant binding studies in the Hin system and for DNA specificity observed in the Hin-related family of DNA invertases.     

Physiologic evaluation of the pelvic floor

In order to gain further insight into the molecular mechanism of arginine-dependent operator recognition by the hexameric Escherichia coli arginine repressor we have probed protein-DNA interactions in vitro and in vivo. We have extensively applied the chemical modification-protection and premodification-interference approach to two operators, the natural operator overlapping the P2 promoter of the carAB operon and a fully symmetrical consensus sequence. Backbone contacts were revealed by hydroxyl radical footprinting and phosphate ethylation interference. Base-specific contacts to purines and pyrimidines were revealed by methylation protection and premodification interference, KMnO4 and NH2OH.HCl-specific modification of thymine and cytosine residues, base-removal (depurination and depyrimidation), and base substitution (uracil and inosine). Additional information on the groove specificity of repressor binding was obtained by small ligand binding interference (distamycin and methyl green). In vivo, we measured the effects on the repressibility of 24 single base-pair substitutions obtained by saturation mutagenesis of half an Arg box in the carAB operator. The results of these experiments point to the conclusion that a hexameric arginine repressor molecule covers four turns of the helix, makes base-specific contacts to at least one guanine (G4 or G4') and two thymine (T3, T13', or T3', T13) residues in each one of four consecutive major grooves on one face of the helix and with four A-T/T-A base-pairs, comprising the adenine residues A9, 9', 12, 12' and the thymine residues T10, 10', 11, 11', in the two outermost minor grooves of the operator, on the very same face of the DNA molecule. The hydrophobic 5-methyl groups of four thymine residues (T3, 3', 13, 13') in each Arg box contribute to major groove-specific recognition via hydrophobic and/or van der Waals interactions. The importance of minor groove contacts was further supported by the drastic effect of distamycin binding interference. In vivo, the most pronounced drops in repressibility were occasioned by mutations at positions 10 (A-->G or C), 11 (T-->A or G) and 12 (A-->G, T or C).     

X-ray structure at 1.76 A resolution of a polypeptide phospholipase A2 inhibitor

The high resolution crystal structure of a natural PLA2 inhibitor has been determined by Patterson search methods. In the heterodimeric, neurotoxic complex, vipoxin, isolated from the venom of Bulgarian viper, PLA2 inhibitor represents the non-toxic subunit. The model was refined to a crystallographic R-factor of 15.5% for data between 6 and 1.76 A resolution. The packing of the inhibitor in the crystal reveals close contacts between the molecules, which are symmetry-related by the 2-fold axes of the lattice. These pairs associate as a crystallographic dimer, stabilized by a set of interactions, including van der Waals contacts between residues from symmetry-related pairs, denoted as the recognition site and the recognition surface. Residues Ph3, Trp31 and Tyr119 represent the recognition site of inhibitor which possibly fits to the hydrophobic wall of the target PLA2. The topology of the inhibitor represents the PLA2 type of folding: three long helices and a beta-hairpin. Superposition of the structure of the inhibitor shows an almost complete overlap with different mammalian and viper PLA2 in the backbone and in the position of the sidechains of the residues that belong to the active centre and the hydrophobic wall. A "lock and key" mechanism of recognition of its native PLA2 in gland cells and other toxic PLA2 in vitro has been suggested. The mechanism includes complementary "head to tail" interactions between the recognition site of the inhibitor and a recognition surface located on the hydrophobic wall of the target PLA2. Having a high spatial homology with the PLA2 family of enzymes but opposing their action, the inhibitor from vipoxin presents an example of a divergent evolution of an ancient PLA2. The presence of a space for binding calcium in the inhibitor is believed to be a rudiment and proof of a common origin with PLA2.     

On the importance of van der Waals interaction in the groove binding of DNA with ligands: restrained molecular dynamics study

Comparison of interaction energy between an oligonucleotide and a DNA-binding ligand in the minor and major groove modes was made by use of restrained molecular dynamics. Distortion in DNA was found for the major groove mode whereas less significant changes for both ligand and DNA were detected for the minor groove binding after molecular dynamics simulation. The conformation of the ligand obtained from the major groove modes resembles that computed with the ligand soaked in water. The van der Waals contact energy was found to be as significant as electrostatic energy and more important for difference in binding energy between these two binding modes. The importance of van der Waals force in groove binding was supported by computations on the complex formed by the repressor peptide fragment from the bacteriophage 434 and its operator oligonucleotide.     

Structure-based redesign of corepressor specificity of the Escherichia coli purine repressor by substitution of residue 190

Guanine or hypoxanthine, physiological corepressors of the Escherichia coli purine repressor (PurR), promote formation of the ternary PurR-corepressor-operator DNA complex that functions to repress pur operon gene expression. Structure-based predictions on the importance of Arg190 in determining 6-oxopurine specificity and corepressor binding affinity were tested by mutagenesis, analysis of in vivo function, and in vitro corepressor binding measurements. Replacements of Arg190 with Ala or Gln resulted in functional repressors in which binding of guanine and hypoxanthine was retained but specificity was relaxed to permit binding of adenine. X-ray structures were determined for ternary complexes of mutant repressors with purines (adenine, guanine, hypoxanthine, and 6-methylpurine) and operator DNA. These structures indicate that R190A binds guanine, hypoxanthine, and adenine with nearly equal, albeit reduced, affinity in large part because of a newly made compensatory hydrogen bond between the rotated hydroxyl side chain of Ser124 and the exocyclic 6 positions of the purines. Through direct and water-mediated contacts, the R190Q protein binds adenine with a nearly 75-fold higher affinity than the wild type repressor while maintaining wild type affinity for guanine and hypoxanthine. The results establish at the atomic level the basis for the critical role of Arg190 in the recognition of the exocyclic 6 position of its purine corepressors and the successful redesign of corepressor specificity.     

The solution structure of a fungal AREA protein-DNA complex: an alternative binding mode for the basic carboxyl tail of GATA factors

The solution structure of a complex between the DNA binding domain of a fungal GATA factor and a 13 base-pair oligonucleotide containing its physiologically relevant CGATAG target sequence has been determined by multidimensional nuclear magnetic resonance spectroscopy. The AREA DNA binding domain, from Aspergillus nidulans, possesses a single Cys2-Cys2 zinc finger module and a basic C-terminal tail, which recognize the CGATAG element via an extensive network of hydrophobic interactions with the bases in the major groove and numerous non-specific contacts along the sugar-phosphate backbone. The zinc finger core of the AREA DNA binding domain has the same global fold as that of the C-terminal DNA binding domain of chicken GATA-1. In contrast to the complex with the DNA binding domain of GATA-1 in which the basic C-terminal tail wraps around the DNA and lies in the minor groove, the structure of complex with the AREA DNA binding domain reveals that the C-terminal tail of the fungal domain runs parallel with the sugar phosphate backbone along the edge of the minor groove. This difference is principally attributed to amino acid substitutions at two positions of the AREA DNA binding domain (Val55, Asn62) relative to that of GATA-1 (Gly55, Lys62). The impact of the different C-terminal tail binding modes on the affinity and specificity of GATA factors is discussed.     

The high resolution crystal structure of the DNA decamer d(AGGCATGCCT)

The crystal structure of the DNA decamer d(AGGCATGCCT) has been determined to a resolution of 1.3 A and R factor of 13.9%. The structure has a unique conformation with each of the decamer single strands forming base-pairing interactions with two symmetry-related strands. The central eight bases of the decamer form an A-DNA octamer duplex with one symmetry-related strand whilst the terminal 5'-A and T-3' bases are flipped out and away from the octamer helix axis to form base-pairing interactions with a second symmetry-related strand. These A.T base-pairs lie perpendicular to the crystallographic c axis and pack within the unit cell in conjunction with a symmetry-related A.T base-pair displaced by 3.4 A degrees along the c axis. A novel base triplet interaction of the type A*(G.C) is present in the structure with interaction from the major groove side of the terminal 5'-A base to the minor groove of the central A-DNA octamer. This structure reports the first example of cobalt hexammine binding to a right-handed DNA duplex. The crystallographic asymmetric unit contains two cobalt hexammine ligands with one site in the major groove coordinating via hydrogen bonds to the 5'-AGG bases, and the second site located between DNA molecules and interacting with the oxygen atoms of phosphate groups.     

A peptide interaction in the major groove of RNA resembles protein interactions in the minor groove of DNA

A 17-amino acid arginine-rich peptide from the bovine immunodeficiency virus Tat protein has been shown to bind with high affinity and specificity to bovine immunodeficiency virus transactivation response element (TAR) RNA, making contacts in the RNA major groove near a bulge. We show that, as in other peptide-RNA complexes, arginine and threonine side chains make important contributions to binding but, unexpectedly, that one isoleucine and three glycine residues also are critical. The isoleucine side chain may intercalate into a hydrophobic pocket in the RNA. Glycine residues may allow the peptide to bind deeply within the RNA major groove and may help determine the conformation of the peptide. Similar features have been observed in protein-DNA and drug-DNA complexes in the DNA minor groove, including hydrophobic interactions and binding deep within the groove, suggesting that the major groove of RNA and minor groove of DNA may share some common recognition features.     

A small engineered protein lacks structural uniqueness by increasing the side-chain conformational entropy

A small globular protein, the third repeat of the c-Myb DNA-binding domain, which is composed of 54 amino acid residues, was engineered so as to understand the structural uniqueness of native proteins. This small protein has three alpha-helices that form a helix-turn-helix structure, which is maintained by the hydrophobic core with three Ile residues. One of the mutant proteins, with two of the buried Ile (Ile-155 and Ile-181) substituted with Leu residues, showed multiple conformations, as monitored by heteronuclear magnetic resonance spectroscopy for 13C- and 15N-labeled proteins. The increase in the side-chain conformational entropy, caused by changing the Ile to a Leu residue on an alpha-helix, could engender the lack of structural uniqueness. In native proteins, the conformations of not only the beta-branched side chains, but also those of the neighboring bulky side chains, can be greatly restricted, depending upon the local backbone structure.     

Minor groove binding of a bis-quaternary ammonium compound: the crystal structure of SN 7167 bound to d(CGCGAATTCGCG)2

The X-ray crystal structure of the complex between the synthetic antitumour and antiviral DNA binding ligand SN 7167 and the DNA oligonucleotide d(CGCGAATTCGCG)2 has been determined to an R factor of 18.3% at 2.6 A resolution. The ligand is located within the minor groove and covers almost 6 bp with the 1-methylpyridinium ring extending as far as the C9-G16 base pair and the 1-methylquinolinium ring lying between the G4-C21 and A5-T20 base pairs. The ligand interacts only weakly with the DNA, as evidenced by long range contacts and shallow penetration into the groove. This structure is compared with that of the complex between the parent compound SN 6999 and the alkylated DNA sequence d(CGC[e6G]AATTCGCG)2. There are significant differences between the two structures in the extent of DNA bending, ligand conformation and groove binding.     

Electrostatic activation of Escherichia coli methionine repressor

BACKGROUND: The three-dimensional structure of the Escherichia coli methionine repressor (met repressor) is relatively unperturbed by the binding of its corepressor, S-adenosylmethionine (SAM), and of operator DNA. The positively charged corepressor binds to sites on the repressor remote from the DNA-binding site, and despite the lack of induced structural change is able to raise the affinity for operator DNA by a factor of up to 1000. Neutral corepressor analogues also bind to the repressor, but do not increase operator affinity. These observations suggest that the corepressor effect may be electrostatic. RESULTS: Using the program DELPHI, we have calculated electrostatic potentials for the repressor and its complexes, and have obtained results consistent with an electrostatic model for repressor activation. The positive potential originating from the corepressor is propagated through the repressor-operator complex, and is significant at DNA phosphate groups buried in the protein-DNA interface. The rank order of calculated electrostatic interaction energies for complexes with SAM, and two closely-related analogues, is in agreement with experimental measurements of the corresponding repressor-operator affinities. CONCLUSION: Long-range (> 10 A) electrostatic interactions between bound corepressor and operator phosphate groups in the repressor-operator complex may be sufficient to explain repressor activation Met repressor could, therefore, be an electrostatically triggered genetic switch.     

Secondary and tertiary structural changes in gamma delta resolvase: comparison of the wild-type enzyme, the I110R mutant, and the C-terminal DNA binding domain in solution

gamma delta Resolvase is a site-specific DNA recombinase (M(r) 20.5 kDa) in Escherichia coli that shares homology with a family of bacterial resolvases and invertases. We have characterized the secondary and tertiary structural behavior of the cloned DNA binding domain (DBD) and a dimerization defective mutant in solution. Low-salt conditions were found to destabilize the tertiary structure of the DBD dramatically, with concomitant changes in the secondary structure that were localized near the hinge regions between the helices. The molten tertiary fold appears to contribute significantly to productive DNA interactions and supports a mechanism of DNA-induced folding of the tertiary structure, a process that enables the DBD to adapt in conformation for each of the three imperfect palindromic sites. At high salt concentrations, the monomeric I110R resolvase shows a minimal perturbation to the three helices of the DBD structure and changes in the linker segment in comparison to the cloned DBD containing the linker. Comparative analysis of the NMR spectra suggest that the I110R mutant contains a folded catalytic core of approximately 60 residues and that the segment from residues 100 to 149 are devoid of regular structure in the I110R resolvase. No increase in the helicity of the linker region of I110R resolvase occurs on binding DNA. These results support a subunit rotation model of strand exchange that involves the partial unfolding of the catalytic domains.     

Crystal structure of the effector-binding domain of the trehalose-repressor of Escherichia coli, a member of the LacI family, in its complexes with inducer trehalose-6-phosphate and noninducer trehalose

The crystal structure of the Escherichia coli trehalose repressor (TreR) in a complex with its inducer trehalose-6-phosphate was determined by the method of multiple isomorphous replacement (MIR) at 2.5 A resolution, followed by the structure determination of TreR in a complex with its noninducer trehalose at 3.1 A resolution. The model consists of residues 61 to 315 comprising the effector binding domain, which forms a dimer as in other members of the LacI family. This domain is composed of two similar subdomains each consisting of a central beta-sheet sandwiched between alpha-helices. The effector binding pocket is at the interface of these subdomains. In spite of different physiological functions, the crystal structures of the two complexes of TreR turned out to be virtually identical to each other with the conformation being similar to those of the effector binding domains of the LacI and PurR in complex with their effector molecules. According to the crystal structure, the noninducer trehalose binds to a similar site as the trehalose portion of trehalose-6-phosphate. The binding affinity for the former is lower than for the latter. The noninducer trehalose thus binds competitively to the repressor. Unlike the phosphorylated inducer molecule, it is incapable of blocking the binding of the repressor headpiece to its operator DNA. The ratio of the concentrations of trehalose-6-phosphate and trehalose thus is used to switch between the two alternative metabolic uses of trehalose as an osmoprotectant and as a carbon source.