用∑WESH图评价某涂料化工厂的可持续性

介绍了在清洁生产过程中用∑WESH图评价涂料化工厂的可持续发展的原理及方法,并进行了一个实例的评价.从该厂的∑WESH图得出该厂的水及能源的利用率高,所用的原材料的稀缺性都不大,唯一较严重的问题是二甲苯的通过量大,危害性较严重.因此建议该厂在配方上尽量减少二甲苯的使用,开发新产品.     

喷涂前处理污染源的分析及其处理措施

随着我国国民经济的快速发展和国家"节能减排"重点项目的深入开展,各种污染源的分析及其处理措施的研究备受关注.本文在充分研究若干家电企业的钢铁喷涂制件的前处理工艺(如:预脱脂、脱脂、清洗、表调、磷化等)的基础上,分析喷涂前处理过程中的污染源,研究污染源的处理措施.     

酿酒酵母细胞表达异源萜类化合物的研究进展

萜类化合物具有可观的经济价值,但是目前的生产过程复杂、产量低。酿酒酵母甲羟戊酸途径为萜类化合物的合成提供直接前体,因此酿酒酵母细胞具有合成异源萜类化合物的天然优势。对酿酒酵母甲羟戊酸途径的清晰认识是对其进行有效利用的基础,本文从代谢途径、关键酶的特点和全局调控机制3个方面对该途径进行了介绍。从代谢途径的构建和优化、模块与底盘细胞的适配、模块构建及组装方式的角度概述了酿酒酵母细胞异源合成单萜、倍半烯萜、二萜、三萜类化合物的研究进展。指出实现酿酒酵母高效合成萜类化合物所需要解决的基础问题是对酿酒酵母甲羟戊酸途径进行更为全面了解和对萜类化合物的天然代谢途径进行明确解析;另外,合成生物学的进一步发展也将为此提供应用基础。     

香叶油的研究进展

为了全面了解香叶油的研究现状,为我国香叶油的开发利用提供思路, 综述了香叶的栽培、组培技术研究、香叶油的应用、香叶油的提取及化学成分研究、香叶油调配研究等方面的现状,并对香叶品种的遗传改良提出一些有益的建议.     

胶原纤维的性能特点和作用

1胶原纤维巴西Novaprom胶原纤维是以精选的牛皮内剖层(真皮)组织提取的,它不同于明胶或明胶的衍生物。它的生产是在严格控制的时间和温度范围内进行的,从而确保其主要成分──胶原蛋白的活性不变,并以天然纤维的形式存在。它在肉制品中的结构呈纤维状而不是一般的胶冻,因而这种结构是非常稳定的,是不可逆的。它是很好的功能性动物纤维蛋白,在肉制品及鱼糜制品等相关的食品中得到广泛的应用。2胶原纤维的性能及相关指标(1)蛋白质含量:胶原纤维中的动物蛋白质(M×6.25)高达98%,含有人体必需的氨基酸。(2)吸水、持水性:胶原纤维结构良好,呈矩…     

鲜为人知的科学珍闻

有言在先,珍闻的挑选奉行以下原则:科学应该是有趣的,科学之所以好玩,部分原因在于你了解、知道这些奇谈怪论的存在。科学的伟大之处在于,它不必是教条的、有价值的实验,也不要求对所有理论进行最准确的过滤以得     

玻璃纤维拉丝池窑配合料设备研制的进展

玻璃纤维池窑拉丝生产线配合料的制备中,原料是形成优质玻璃液的基础,因此可以说配合料的稳定性、均匀性和准确性对玻璃纤维的质量起着决定的作用.生产实践证明:组分和粒度均匀的配合料,不但能强化玻璃液的熔化和澄清过程,而且还能减少或消除影响玻璃质量的各种弊病.所以认真拟定玻璃纤维原料的成分和选择玻璃纤维的种类和化学性质:严格控制进厂原料化学成分、粒度和水份;做好原料的分堆、存放、加工、称量、混合、输送是优质配合料制备不可缺少的手段,这也是做好玻璃纤维池窑配合料的基本任务.     

氢氧化镁阻燃剂的研究进展

主要论述了国内外阻燃剂的种类和发展,指出由于环境和健康的原因,无机阻燃剂是最有发展前途的,其中的氢氧化镁因其特有的性质,在无机阻燃剂中尤为突出.考虑到氢氧化镁的广泛应用的前景和其本身的缺点,对其改性成为业界的研究重点,其中主要介绍了钛酸酯、硬脂酸(盐)、镁盐晶须和胶囊化等技术,指出以后的发展方向是在改性基础上的协同作用.     

高浸透性大分子聚酯乳液的研制

1前言 随着池窑生产的发展,原有的浸润剂在快速浸润性和快速浸透性方面无法得到满足.意大利DSM公司聚酯乳液是公认的喷射纱浸润剂最好的成膜剂.本项目的目的是研制出能工业化生产的与DSM公司产品质量相当的聚酯乳液,替代进口,节约外汇,满足我国池窑发展需要,争创良好的经济社会效益.     

宁静——使艺术深华

宁静的山是心灵的绘画,宁静的水是灵魂的诗篇,宁静的夜是精神的书籍。在这越来越充斥着物欲纵横的社会,浮躁成了现代人的代名词,而保持一颗宁静的心,尤其在艺术创作中显得尤为重要。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。