Characterization of polyvinyl alcohol/gelatin blend hydrogel films for biomedical applications

In the present investigation, attempt was made to prepare blend hydrogel by esterification of polyvinyl alcohol with gelatin. The blend hydrogel was further converted into films by the conventional solution‐casting method. These films were characterized by FTIR, DSC, and X‐ray diffraction studies. The refractive index and viscosity of different composition of the blends were measured in the solution phase of the material. The mechanical properties of the blend films were measured by tensile test. Swelling behavior of the blend hydrogel was also studied. The FTIR spectrum of the blend film indicated complete esterification of the free carboxylic group of gelatin. The DSC results indicate that the addition of gelatin with PVA changes the thermal behavior like melting temperature of PVA, which may be due to the miscibility of PVA with gelatin. The interaction of gelatin with PVA molecule changes the crystallite parameters and the degree of crystallinity. The crystallinity of the blend film was mainly due to gelatin. The comparison of viscosity indicated an increase in the segment density within the molecular coil. The results revealed the changes observed in the properties of the gel, and it enhances the gel formation at viscoelastic phase of the material. The blend film had sufficient strength and water‐holding capacity. The results obtained indicated that the blend film could be used for various biomedical applications such as wound dressing and drug‐delivery systems. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation of PAM/PVA blending films by solution-cast technique and its characterization: a spectroscopic study

Polyacrylamide (PAM) and poly(vinyl alcohol) (PVA) were blended with different weight percentages (70/30, 50/50, 30/70) using solution-cast technique. The prepared films were studied by different characterization techniques. The effect of PVA content on PAM blends was investigated by Fourier transform infrared (FTIR), ultra violet visible (UV–vis), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). Different mechanical properties of blends were also studied. Significant changes were observed in FTIR, UV–vis, TGA, SEM and mechanical analysis which revealed interactions between the two polymers. FTIR spectra showed the presence of hydrogen bonding between PAM and PVA and hydrophilic nature of the blends. Different optical properties were studied by UV–vis spectroscopy. The weight loss, as a function of temperature of blends, was analyzed by TGA. The results obtained from different experimental techniques were supported by SEM image analysis. FTIR analysis confirmed the conclusion on the specific hydrogen bonding between –CONH₂ groups in PAM and –OH group in PVA. These results showed the change in the thermal stability and mechanical properties. FTIR analysis revealed that a blend ratio of 50/50 wt% had maximum intermolecular interaction between two polymers. It was finally concluded that blend films with the above ratio display higher thermal stability and improved mechanical properties. Due to changes in interactions, the optical parameters were also changed.     

CdS/PVA In-Situ Polymerization Composite Films with Enhanced Structural,Optics, Limiting Effect and Electrical Properties

Cadmium sulfide doped Poly(vinyl alcohol) (CdS/PVA) polymeric films have synthesized by using in-situ polymerization technique and ultrasonic approach at the various molar weight of CdS. Subsequently, CdS/PVA polymeric films have been prepared with the objective of studying the effect of CdS nanoparticles on structural, optical and dielectric properties of PVA matrix films. XRD analysis was used to investigate the structural changes of CdS/PVA polymeric films. XRD study evidently shows a cubic crystal structure for CdS powder with the lattice constants a?=?5.818 Å and the space group F-43m. All polymeric films revealed the appearance of smaller new peaks related to the presence of CdS into PVA matrix. The dependence of optical properties was investigated by using UV–vis spectroscopy. The estimated band gaps energies revealed a redshift that confirms the active region in solar cell devices. The optical limiting effect showed a completely UV–Vis blocking of the synthesized polymeric films at the high molar of CdS contents. Dielectric properties were measured by using high-frequency LCR meter (4200-SCS) and were found to be strongly dependent on frequency and molar of CdS concentration. Dielectric permittivities were strongly influenced by the applied angular frequency and the real parts were decreased with increasing the molar CdS concentration. AC conductivity increased with angular frequency and decreased with increase in molar weight of CdS content. The results revealed that all synthesized materials are potentially suitable for optics technology devices.     

Structural properties of sodium ion implanted poly(vinyl alcohol) films

Poly(vinyl alcohol) (PVA) films were implanted with sodium ions at various energies and total doses. Modified films were characterized by Fourier transform IR (FTIR), UV–visible (UV–vis), X‐ray diffraction (XRD), and scanning electron microscopy (SEM). From FTIR studies, it was evident that scission of the main chain occurred together with removal of hydrogen and hydroxyl groups. Sodium ions formed weak bonds with oxygen from the neighboring chains. UV–vis studies of implanted PVA showed increases in the absorbance values with the various energies and total doses. XRD studies revealed that, as the energy and total dose increased overall, the crystallinity decreased and new peaks at different 2θ values appeared. Changes in the crystallinity were also studied for thermally annealed PVA films in order to correlate and understand the phenomena of recrystallization due to ion implantation. The morphological features of the films were investigated by SEM. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 276–283, 2005     

木质素磺酸钠与PVA共混薄膜的制备与表征

以木质素磺酸钠(LS)和聚乙烯醇(PVA)为主要原料,添加适量硼砂、明胶在水溶液中溶解共混,流延成膜.通过单因素和正交实验优选了LS/PVA共混膜制备的条件,对共混膜进行了耐水性、形貌、红外、热重、X射线衍射及差示扫描量热分析.结果表明:影响共混膜性能的主要因素有LS含量、硼砂含量以及反应时间,当硼砂含量为2.0%时,...     

Fumed SiO2 nanoparticle reinforced biopolymer blend nanocomposites with high dielectric constant and low dielectric loss for flexible organic electronics

In the present study, fumed silica (SiO₂) nanoparticle reinforced poly(vinyl alcohol) (PVA) and poly(vinylpyrrolidone) (PVP) blend nanocomposite films were prepared via a simple solution‐blending technique. Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–vis), X‐ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to elucidate the successful incorporation of SiO₂ nanoparticles in the PVA/PVP blend matrix. A thermogravimetric analyzer was used to evaluate the thermal stability of the nanocomposites. The dielectric properties such as dielectric constant (?) and dielectric loss (tan δ) of the PVA/PVP/SiO₂ nanocomposite films were evaluated in the broadband frequency range of 10^?2 Hz to 20 MHz and for temperatures in the range 40–150 °C. The FTIR and UV–vis spectroscopy results implied the presence of hydrogen bonding interaction between SiO₂ and the PVA/PVP blend matrix. The XRD and SEM results revealed that SiO₂ nanoparticles were uniformly dispersed in the PVA/PVP blend matrix. The dielectric property analysis revealed that the dielectric constant values of the nanocomposites are higher than those of PVA/PVP blends. The maximum dielectric constant and the dielectric loss were 125 (10^?2 Hz, 150 °C) and 1.1 (10^?2 Hz, 70 °C), respectively, for PVA/PVP/SiO₂ nanocomposites with 25 wt % SiO₂ content. These results enable the preparation of dielectric nanocomposites using a facile solution‐casting method that exhibit the desirable dielectric performance for flexible organic electronics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44427.     

Properties of soy protein isolate/poly(vinyl alcohol) blend “green” films: Compatibility,mechanical properties,and thermal stability

Blend films from nature soy protein isolates (SPI) and synthetical poly(vinyl alcohol) (PVA) compatibilized by glycerol were successfully fabricated by a solution‐casting method in this study. Properties of compatibility, mechanical properties, and thermal stability of SPI/PVA films were investigated based on the effect of the PVA concentration. XRD tests confirm that the SPI/PVA films were partially crystalline materials with peaks of 2θ = 20°. And, the addition of glycerol will insert the crystalline structure and destroy the blend microstructure of SPI/PVA. Differential scanning calorimetry (DSC) tests show that SPI/PVA blend polymers have a single glass transition temperature (T_g) between 80 and 115.0°C, which indicate that SPI and PVA have good compatibility. The tension tests show that SPI/PVA films exhibit both higher tensile strength (σ_b) and percentage elongation at break point (P.E.B.). Thermogravimetric analysis (TGA) and water solubility tests show that SPI/PVA blend polymer has more stable stability than pure SPI. All the results reflect that SPI/PVA/glycerol blend film provides a convenient and promising way to prepare soy protein plastics for practical application. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Dopant‐induced microstructural,optical, and electrical properties of TiO2/PVA composite

The optical, electrical, and microstructurtal properties of pure and TiO₂/Poly(vinyl alcohol) (PVA) composite polymer films were carried out using FTIR, XRD, UV‐Visible, DC electrical conductivity, and Positron annihilation lifetime spectroscopy (PALS) techniques. The FTIR study reveals that the Ti⁺ ions of TiO₂ interacts with the OH groups of PVA via intra/inter molecular hydrogen bonding and forms charge transfer complex (CTC). These formed CTC will affect the optical property of the composite film, which is reflected from UV‐Visible study. Using the observed UV–Visible spectra, optical energy band gap is estimated and its value decreases with increasing dopant concentration. The positron annihilation studies show that the considerable effect on free volume related microstructure of the PVA due to doping and complex formation. These microstructural modifications are also enhances PVA crystallinity which is reflected from XRD studies. It is also observed that the TiO₂ particle forms cluster within the PVA due to the aggregation of particles and these particle cluster size increases with dopant concentration. These microstructural variations due to doping affects the DC electrical conductivity and its variations are understood based on the intra chain one‐dimensional interpolaron hopping conduction mechanism. POLYM. COMPOS. 37:987–997, 2016. © 2014 Society of Plastics Engineers     

Preparation and characterization of PS‐PMMA/ZnO nanocomposite films with novel properties of high transparency and UV‐shielding capacity

High transparent and UV‐shielding poly (styrene)‐co‐poly(methyl methacrylate) (PS‐PMMA)/zinc oxide (ZnO) optical nanocomposite films were prepared by solution mixing using methyl ethyl ketone (MEK) as a cosolvent. The films were characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible (UV–vis) spectra, high‐resolution transmission electron microscopy (HR‐TEM), and atomic force microscope (AFM). Cross‐section HR‐TEM and AFM images showed that the ZnO nanoparticles were uniformly dispersed in the polymer matrix at the nanoscale level. The XRD and FTIR studies indicate that there is no chemical bond or interaction between PS‐PMMA and ZnO nanoparticles in the nanocomposite films. The UV–vis spectra in the wavelength range of 200–800 nm showed that nanocomposite films with ZnO particle contents from 1 to 20 wt % had strong absorption in UV spectrum region and the same transparency as pure PMMA‐PS film in the visible region. The optical properties of polymer are greatly improved by the incorporation of ZnO nanoparticles. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of films based on crosslinked blends of gum acacia,polyvinylalcohol, and polyvinylpyrrolidone-iodine complex

In an attempt to develop iodine-release systems based on polymeric blend for biomedical applications, our research group prepared blends of gum acacia (GA), polyvinylalcohol (PVA), and polyvinylpyrrolidone-iodine (PVP-I) complex. The blends of GA/PVA and GA/PVA/PVP-I prepared from the aqueous solutions of the polymers were crosslinked with glutaraldehyde to increase the water resistance of the films and to improve their thermal and mechanical properties. The crosslinked GA/PVA and GA/PVA/PVP-I blend films were characterized by FTIR spectroscopy, DSC, and TGA. The swelling behavior of the prepared blends was investigated and crosslinked GA/PVA blend films were found to be pH sensitive. The properties of PVP-I containing blends differed from those prepared without it probably due to the formation of an intermolecular interaction between PVP-I and the hydroxy-polymers. The results indicated that after crosslinking the blends showed improvement in water resistance, thermal, and mechanical properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Studies of chitosan. I. Preparation and characterization of chitosan/poly(vinyl alcohol) blend films

Various blending ratios of chitosan/poly (vinyl alcohol) (CS/PVA) blend films were prepared by solution blend method in this study. The thermal properties and chemical structure characterization of the CS/PVA blend films were examined by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), and Fourier transform infrared (FTIR). Based upon the observation on the DSC thermal analysis, the melting point of PVA is decreased when the amount of CS in the blend film is increased. The FTIR absorption characteristic is changed when the amount of CS in the blend film is varied. Results of X‐ray diffraction (XRD) analysis indicate that the intensity of diffraction peak at 19° of PVA becomes lower and broader with increasing the amount of CS in the CS/PVA blend film. This trend illustrates that the existence of CS decreases the crystallinity of PVA. Although both PVA and CS are hydrophilic biodegradable polymers, the results of water contact angle measurement are still shown as high as 68° and 83° for PVA and for CS films, respectively. A minimum water contact angle (56°) was observed when the blend film contains 50 wt % CS. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis of Novel (Polymer Blend-Ceramics) Nanocomposites: Structural,Optical and Electrical Properties for Humidity Sensors

Fabrication of novel nanocomposites films of (PVA–CMC) blend and (PVA–CMC) blend doped by niobium carbide nanoparticles has been investigated. The structural, optical and electrical properties of (PVA–CMC–NbC) nanocomposites for humidity sensors have been studied. The (PVA–CMC–NbC) nanocomposites were prepared with different concentrations of (polyvinyl alcohol and carboxyl methyl cellulose) and Niobium carbide nanoparticles. The experimental results of optical properties for (PVA–CMC–NbC) nanocomposites showed that the absorbance, absorption coefficient, extinction coefficient, refractive index, real and imaginary dielectric constants and optical conductivity of (PVA–CMC) blend increase with increase in Niobium carbide nanoparticles concentrations. The transmittance and energy band gap decrease with increase in Niobium carbide nanoparticles concentrations. The DC electrical properties of (PVA–CMC–NbC) nanocomposites showed that the electrical conductivity of the blend increases with increase in NbC nanoparticles concentrations. The experimental results of novel (PVA–CMC–NbC) nanocomposites applications showed that the (PVA–CMC–NbC) nanocomposites have high sensitivity for relative humidity.     

Antibacterial poly(vinyl alcohol) film containing silver nanoparticles: Preparation and characterization

The importance of antibacterial materials for biomedical applications is growing nowadays. The presented article deals with the characterization of structural, mechanical and thermal properties and of antibacterial polymeric films based on polyvinyl alcohol (PVA) and silver nitrate, which can find their applicability in wound dressing components and protective coating. The methods of transmission electron microscopy, UV–vis and XRD spectroscopy, optical microscopy, differential scanning calorimetry, stress–strain analysis, and agar diffusion test were used to characterize the polymer films prepared. The results showed strong antibacterial activity against Escherichia coli and Staphylococcus aureus already at the lowest addition level of silver nitrate. An improvement of mechanical properties (Young's modulus) was also noticed due to a modification of PVA with silver nitrate up to 1 wt. % of silver content. Furthermore, the results show a strong effect of the thermal history of the sample preparation on the degree of silver‐ion reduction and formation of nanoparticles. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of nano-SiO2 on the compatibility of PVA/RSF blend

A series of poly(vinyl alcohol) (PVA)/regenerated silk fibroin (RSF)/nano-silicon dioxide (nano-SiO₂) blend films were prepared by solution casting method, in which nano-SiO₂ was obtained via sol?Cgel process. The structure, properties, and morphology of the films related to the compatibility were investigated by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). XRD peaks of PVA/RSF/nano-SiO₂ (1.0?wt?%) blends decreased in intensity indicated that formation of PVA and RSF crystal lattices was hindered by nano-SiO₂ particles. FTIR spectroscopy analysis of PVA/RSF/nano-SiO₂ films confirmed that both Si?CO?CC linkage and hydrogen bonding were formed among PVA, RSF, and nano-SiO₂. SEM showed that there was no obvious phase separation in PVA/RSF/nano-SiO₂ (1.0?wt?%) film although small uniform blur particles can still be found. In addition, TEM showed nano-particles were well dispersed through the PVA/RSF polymer matrix. Besides, the observed shift in glass transition temperatures (T _g) and improvement in thermal properties of composite films suggested the enhanced compatibility due to interfacial bonding and intermolecular interactions. Therefore, these results indicated that the compatibility of PVA/RSF was improved effectively by the addition of nano-SiO₂.     

Deduction of a facile method to construct Antheraea mylitta silk fibroin/gelatin blend films for prospective biomedical applications

Blend films of two types (I and II) were prepared by mixing Antheraea mylitta silk fibroin (AMF) and gelatin solution in various blend ratios via the solution casting method. Two different crosslinkers, namely glutaraldehyde and genipin, were used during blend preparation. The structural characteristics and thermal properties of the blend films were examined by Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD), Thermogravimetric analysis (TGA) and Diffrential scanning calorimetery (DSC). The FTIR spectra showed conformational alterations in type I blend films while type II films attained high β‐sheet crystallinity. The XRD diffractograms presented a high degree of crystallinity in type II blend films compared to type I, which showed an almost amorphous structure. Further, thermal and biological studies were conducted on type II films. According to the TGA thermograms, the degradation temperature of the crosslinked blend films shifted compared to pure gelatin and pure AMF films. Partial miscibility of the two components was indicated by DSC thermograms of the blends. The high water uptake capacity of type II blend films was found to imitate hydrogel behaviour. The blend films did not show any toxicity in 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide (MTT) assay and supported L929 fibroblast cell spreading and proliferation. The biodegradation of the blend films was significantly faster than the pure silk film. © 2020 Society of Industrial Chemistry     

Variation of lexan polycarbonate properties by electron beam

The modifications in microstructural, optical, and photoluminescence properties of the Lexan polycarbonate (bisphenol‐A‐polycarbonate) films exposed to different electron doses have been studied using UV–vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), positron annihilation lifetime spectroscopy, photoluminescence spectroscopy, and scanning electron microscopy (SEM). The obtained UV–vis spectroscopy results showed decrease in optical energy gap, optical activation energy, and increase in number of carbon atoms per cluster with increase in electron dose. The chemical changes in electron irradiated polymers due to chain scission and reconstruction have been observed from FTIR spectroscopy. The correlation of positron lifetime study with optical measurement is obtained, and electron irradiation‐induced microstructural modifications within the polymer is understood. SEM result shows the degradation of Lexan polymer after electron irradiation. The mechanical properties and average molecular weight of Lexan decrease after irradiation, whereas average number of chain scissions per original polymer molecule increases. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis,Structural and Optical Characterization of MgO Nanocrystalline Embedded in PVA Matrix

Nano-magnesium oxide (MgO) was prepared by wet chemical method using magnesium chloride and sodium hydroxide as precursors and soluble gelatin as stabilizing agent in this paper. The synthesized nano MgO was characterized by XRD, SEM, and FTIR. The results showed that the size of nano-MgO was about 20.62 nm. Polyvinyl alcohol (PVA) polymer based nanocomposites, with different concentrations of MgO (1, 2, 3, 4 wt%), have been prepared using solvent casting technique. The results of SEM revealed that the MgO nanoparticles are uniformly distributed in PVA polymer matrix. FTIR analysis evidently saw the interaction between MgO with hydroxyl group of PVA through hydrogen bonding. The influences of MgO nanoparticle on the optical characterisation of PVA have been considered using UV–Vis–NIR spectroscopy. Energy band gap and tail of localized state of PVA/MgO nanocomposites have been calculated by using Tauc and Urbach relations, respectively. The band gap of the nanocomposites samples decreases as MgO wt% increases. Wemple-DiDomenico single-oscillator model has been applied to analyze the dispersion of the refractive index of the films, and the dispersion parameters are calculated to obtain the information about disorder degree.     

尿素/甲酰胺增塑PVA的性能研究

采用流延成膜法制备了以尿素/甲酰胺为复配增塑剂改性的聚乙烯醇(PVA)改性薄膜。采用FTIR研究了复配增塑剂尿素/甲酰胺和PVA之间的相互作用,采用XRD、DSC、TGA和拉伸性能测定对改性后的PVA膜性能进行了测试表征。结果表明,尿素/甲酰胺能与PVA形成氢键作用,破坏PVA的结晶结构,降低PVA膜的结晶度。尿素/甲酰胺的加入降低了PVA的熔点,提高了PVA的热分解温度。改性后的PVA膜的拉伸强度降低,断裂伸长率提高。     

Impact of vanadium-, sulfur-, and dysprosium-doped zinc oxide nanoparticles on various properties of PVDF/functionalized-PMMA blend nanocomposites: Structural,optical, and morphological studies

The polymeric blend was fabricated with crystalline poly(vinylidene fluoride) (PVDF)/amorphous functionalized-poly(methyl methacrylate) (PMMA) in 70/30 w/w ratio by chemical mixing method. Functionalization of PMMA was achieved with 2-amino-5-nitrobenzoic acid. The prepared polymer blend was used as a matrix to synthesize nanocomposites with undoped/doped zinc oxide (ZnO) nanoparticles. Doping in ZnO was achieved with vanadium, sulfur, and dysprosium elements as a dopant. The structural, optical, electronic, and morphological properties of undoped/doped nanosized ZnO and blended nanocomposites were accessed through sophisticated analytical techniques, that is, Fourier transform infrared (FTIR), ultraviolet–visible (UV–vis), UV–vis–diffuse reflectance spectra, nuclear magnetic resonance, fluorescence spectroscopy, X-ray diffraction (XRD), transmission electron microscopy, and scanning electron microscopy. The FTIR band at 1165–1176 cm⁻¹ in functionalized-PMMA indicate the formation of aliphatic C-N bond along with aromatic ¹H chemical shift (δ) at 7.134, 7.829 and 8.210 ppm confirm the successfully functionalization of PMMA. The prominent XRD peak at 2θ = 20.8° in nanocomposites shown improvement in β-phase of PVDF. The results show that Dy doped ZnO nanoparticles create remarkable effect on various properties of nanocomposites. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47116.     

Synthesis and characterizations of magnetite nanocomposite films for radiation shielding

Polyvinyl alcohol (PVA) films containing magnetite Fe₃O₄ nanoparticles have been prepared by co‐precipitation method for use in gamma ray shielding and protection. Characterizations of the magnetite/PVA nanocomposite films were investigated by X‐ray diffraction (XRD), transmission electron microscopy (TEM), UV–vis spectroscopy, and magnetization measurements. TEM images showed that the synthesized magnetite particles had about 6–11 nm dimensions. Optical study's results revealed that the optical energy band gaps of thin films range between 1.82 and 2.81 eV at room temperature using UV–visible absorption spectroscopy. The saturation magnetization (MS) value measured by vibrating sample magnetometer VSM was found to be 8.1 emu/g with superparamagnetic nature. The radiation shielding properties such as linear attenuation coefficients (μ ) and half‐value thickness (HVT) for the magnetite nanocomposite films have been obtained experimentally for different photon energies. The results imply that these nanocomposites films are promising radiation shielding materials. POLYM. COMPOS., 38:974–980, 2017. © 2015 Society of Plastics Engineers