Effect of poly(oxyalkylene)amines on structure and properties of epoxide nanocomposites

A shortcoming of most polymer nanocomposites is relatively low toughness. An effective method to eliminate this is the use of a suitable combination of polymeric impact modifiers with organoclay, which may impart synergistic effects on the mechanical behavior of both thermoplastic and thermoset matrix nanocomposites. This work focuses on the effect of various combinations of amine-terminated (APOP) and hydroxyl-terminated poly(oxypropylene) (POP) and layered silicates on the structure and mechanical behavior of epoxy nanocomposites. The combination of APOP and POP with 0.5−5% wt % of organoclay leads to some compositions that produce well balanced mechanical behavior of the epoxy nanocomposite. The higher toughening effectiveness of APOP/montmorillonite (MMT) compared with that of POP/MMT is a consequence of formation of blended domains consisting of clay tactoids and fine APOP inclusions. An increase in the dispersed particle size with clay content was observed to be a consequence of more significant clay-induced nucleation of phase separation at the expense of clay-induced accelerated curing. The best mechanical behavior was observed for materials using an adduct of APOP and MMT, which was obtained using the ion exchange of sodium ions of MMT by protonated APOP. The enhanced mechanical behavior was due to the formation of nanosized planar arrays by self-pilling of elastomer-modified clay and the corresponding increase in the T_g of the epoxy. The structure/property relationships of these systems indicate that this type of clay polymer combination provides an effective way of modifying the mechanical behavior of epoxy nanocomposites. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Bio‐based polymer nanocomposites based on layered silicates having a reactive and renewable intercalant

Soybean oil‐based polymer nanocomposites were synthesized from acrylated epoxidized soybean oil (AESO) combined with styrene monomer and montmorillonite (MMT) clay by using in situ free radical polymerization reaction. Special attention was paid to the modification of MMT clay, which was carried out by methacryl‐functionalized and quaternized derivative of methyl oleate intercalant. It was synthesized from olive oil triglyceride, as a renewable intercalant. The resultant nanocomposites were characterized by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The effect of increased nanofiller loading in thermal and mechanical properties of the nanocomposites was investigated by thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA). The nanocomposites exhibited improved thermal and dynamic mechanical properties compared with neat acrylated epoxidized soybean oil based polymer matrix. The desired exfoliated nanocomposite structure was achieved when the OrgMMT loading was 1 and 2 wt % whereas partially exfoliated nanocomposite was obtained in 3 wt % loading. It was found that about 400 and 500% increments in storage modulus at glass transition and rubbery regions, respectively were achieved at 2 wt % clay loading compared to neat polymer matrix while the lowest thermal degradation rate was gained by introducing 3 wt % clay loading. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2031–2041, 2013     

Structural characterization of hydrophilic polymer blends/montmorillonite clay nanocomposites

The nanocomposite films comprising polymer blends of poly(vinyl alcohol) (PVA), poly(vinyl pyrrolidone) (PVP), poly(ethylene oxide) (PEO), and poly(ethylene glycol) (PEG) with montmorillonite (MMT) clay as nanofiller were prepared by aqueous solution casting method. The X‐ray diffraction studies of the PVA–x wt % MMT, (PVA–PVP)–x wt % MMT, (PVA–PEO)–x wt % MMT and (PVA–PEG)–x wt % MMT nanocomposites containing MMT concentrations x = 1, 2, 3, 5 and 10 wt % of the polymer weight were carried out in the angular range (2θ) of 3.8–30°. The values of MMT basal spacing d₀₀₁, expansion of clay gallery width W_cg, d‐spacing of polymer spherulite, crystallite size L and diffraction peak intensity I were determined for these nanocomposites. The values of structural parameters reveal that the linear chain PEO and PEG in the PVA blend based nanocomposites promote the amount of MMT intercalated structures, and these structures are found relatively higher for the (PVA–PEO)–x wt % MMT nanocomposites. It is observed that the presence of bulky ester‐side group in PVP backbone restricts its intercalation, whereas the adsorption behavior of PVP on the MMT nanosheets mainly results the MMT exfoliated structures in the (PVA–PVP)–x wt % MMT nanocomposites. The crystallinities of the PEO and PEG were found low due to their blending with PVA, which further decreased anomalously with the increase of MMT concentration in the nanocomposites. The decrease of polymer crystalline phase of these materials confirmed their suitability in preparation of novel solid polymer nanocomposite electrolytes. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40617.     

Effects of silane grafting on the morphology and thermal stability of poly(ethylene terephthalate)/clay nanocomposites

An alkylammonium intercalated montmorillonite (A‐MMT) was modified by edge grafting with 3‐glycidoxypropyltrimethoxysilane. In comparison with poly(ethylene terephthalate) (PET)/A‐MMT, the resultant grafted clay, S‐A‐MMT, exhibited improved miscibility with PET matrix and revealed better dispersion state in the melting compounded PET/S‐A‐MMT nanocomposites. As a result, the PET/S‐A‐MMT nanocomposite had slower degradation rate owing to the enhanced clay barrier effect. Meanwhile, the nanocomposite exhibited lower degradation onset temperature under nitrogen because of the clay catalysis effect, which can be explained by the decreasing degradation reaction energy calculated from Coats–Redfern method of degradation kinetics. In the other hand, nanocomposite with better clay dispersion state exhibited increasing thermal oxidative stability due to clay barrier effect of hindering oxygen to diffuse in, which accorded with the continuous and compact char surface formed during polymer degradation. The clay catalysis and barrier effect of silicate layers were presented directly in isothermal oxidative TGA experiment. Furthermore, the mechanical and crystallization properties of PET/clay nanocomposites were investigated as well. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Preparation of polystyrene–clay nanocomposites via dispersion polymerization using oligomeric styrene‐montmorillonite as stabilizer

This study describes the preparation of polystyrene–clay nanocomposite (PS‐nanocomposite) colloidal particles via free‐radical polymerization in dispersion. Montmorillonite clay (MMT) was pre‐modified using different concentrations of cationic styrene oligomeric (‘PS‐cationic’), and the subsequent modified PS‐MMT was used as stabilizer in the dispersion polymerization of styrene. The main objective of this study was to use the clay platelets as fillers to improve the thermal and mechanical properties of the final PS‐nanocomposites and as steric stabilizers in dispersion polymerization after modification with PS‐cationic. The correlation between the degree of clay modification and the morphology of the colloidal PS particles was investigated. The clay platelets were found to be encapsulated inside PS latex only when the clay surface was rendered highly hydrophobic, and stable polymer latex was obtained. The morphology of PS‐nanocomposite material (after film formation) was found to range from partially exfoliated to intercalated structure depending on the percentage of PS‐MMT loading. The impact of the modified clay loading on the monomer conversion, the polymer molecular weight, the thermal stability and the thermomechanical properties of the final PS‐nanocomposites was determined. Copyright © 2012 Society of Chemical Industry     

Poly(vinyl alcohol) nanocomposites with different clays: Pristine clays and organoclays

Poly(vinyl alcohol) (PVA)/clay nanocomposites were synthesized using the solution intercalation method. Na ion‐exchanged clays [Na⁺–saponite (SPT) and Na⁺–montmorillonite (MMT)] and alkyl ammonium ion‐exchanged clays (C₁₂–MMT and C₁₂OOH–MMT) were used for the PVA nanocomposites. From the morphological studies, the Na ion‐exchanged clay is more easily dispersed in a PVA matrix than is the alkyl ammonium ion‐exchanged clay. Attempts were also made to improve both the thermal stabilities and the tensile properties of PVA/clay nanocomposite films, and it was found that the addition of only a small amount of clay was sufficient for that purpose. Both the ultimate tensile strength and the initial modulus for the nanocomposites increased gradually with clay loading up to 8 wt %. In C₁₂OOH–MMT, the maximum enhancement of the ultimate tensile strength and the initial modulus for the nanocomposites was observed for blends containing 6 wt % organoclay. Na ion‐exchanged clays have higher tensile strengths than those of organic alkyl‐exchanged clays in PVA nanocomposites films. On the other hand, organic alkyl‐exchanged clays have initial moduli that are better than those of Na ion‐exchanged clays. Overall, the content of clay particles in the polymer matrix affect both the thermal stability and the tensile properties of the polymer/clay nanocomposites. However, a change in thermal stability with clay was not significant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3208–3214, 2003     

Morphology and mechanical and viscoelastic properties of rubbery epoxy/organoclay montmorillonite nanocomposites

The morphology and mechanical and viscoelastic properties of rubbery epoxy/organoclay montmorillonite (MMT) nanocomposites were investigated with wide‐angle X‐ray scattering (WAXS), transmission electron microscopy (TEM), tensile testing, and dynamic mechanical thermal analysis. An ultrasonicator was used to apply external shearing forces to disperse the silicate clay layers in the epoxy matrix. The first step of the nanocomposite preparation consisted of swelling MMT in a curing agent, that is, an aliphatic diamine based on a polyoxypropylene backbone with a low viscosity for better diffusion into the intragalleries. Then, the epoxy prepolymer was added to the mixture. Better dispersion and intercalation of the nanoclay in the matrix were expected. The organic modification of MMT with octadecylammonium ions led to an increase in the initial d‐spacing (the [d₀₀₁] peak) from 14.4 to 28.5 Å, as determined by WAXS; this indicated the occurrence of an intercalation. The addition of 5 phr MMTC18 (MMT after the modification) to the epoxy matrix resulted in a finer dispersion, as evidenced by the disappearance of the diffraction peak in the WAXS pattern and TEM images. The mechanical and viscoelastic properties were improved for both MMT and MMTC18 nanocomposites, but they were more pronounced for the modified ones. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 103: 3547–3552, 2007     

Investigation of corrosion protection performance of epoxy coatings modified by polyaniline/clay nanocomposites on steel surfaces

In this study, polyaniline (PANI) and polyaniline/clay nanocomposites were prepared via in situ oxidative polymerization. The morphology of nanocomposites structures was investigated by X-ray diffraction (XRD). The chemical structures of PANI and PANI/clay nanocomposites were examined via Fourier transform infrared (FT-IR) spectroscopy. Polyaniline-based pigments were introduced into epoxy paint and applied on steel substrates. The effect of clay addition and the type of clay cation, including Na⁺ in natural clay (MMT) and alkyl ammonium ions in organo-modified montmorillonite (OMMT), on the anticorrosion performance of epoxy-based coatings was investigated through electrochemical Tafel test, electrochemical impedance spectroscopy and immersion measurements in NaCl solution. The stability of the adhesion of the neat and modified epoxy coatings to the steel surface was also examined. The results indicated that introduction of PANI/OMMT nanocomposite into epoxy paint results in improved anticorrosion properties in comparison with PANI/MMT and neat PANI.     

Mechanical and morphological properties of organic–inorganic,hybrid, clay‐filled,and cyanate ester/siloxane toughened epoxy nanocomposites

Organic–inorganic hybrids involving cyanate ester and hydroxyl‐terminated polydimethylsiloxane (HTPDMS) modified diglycidyl ether of bisphenol A (DGEBA; epoxy resin) filled with organomodified clay [montmorillonite (MMT)] nanocomposites were prepared via in situ polymerization and compared with unfilled‐clay macrocomposites. The epoxy‐organomodified MMT clay nanocomposites were prepared by the homogeneous dispersion of various percentages (1–5%), and the resulting homogeneous epoxy/clay hybrids were modified with 10% HTPDMS and γ‐aminopropyltriethoxysilane as a coupling agent in the presence of a tin catalyst. The siliconized epoxy/clay prepolymer was further modified separately with 10% of three different types of cyanate esters, namely, 4,4′‐dicyanato‐2,2′‐diphenylpropane, 1,1′‐bis(3‐methyl‐4‐cyanatophenyl) cyclohexane, and 1,3‐dicyanato benzene, and cured with diaminodiphenylmethane as a curing agent. The reactions during the curing process between the epoxy, siloxane, and cyanate were confirmed by Fourier transform infrared analysis. The results of dynamic mechanical analysis showed that the glass‐transition temperatures of the clay‐filled hybrid epoxy systems were lower than that of neat epoxy. The data obtained from mechanical studies implied that there was a significant improvement in the strength and modulus by the nanoscale reinforcement of organomodified MMT clay with the matrix resin. The morphologies of the siloxane‐containing, hybrid epoxy/clay systems showed heterogeneous character due to the partial incompatibility of HTPDMS. The exfoliation of the organoclay was ascertained from X‐ray diffraction patterns. The increase in the percentage of organomodified MMT clay up to 5 wt % led to a significant improvement in the mechanical properties and an insignificant decrease in the glass‐transition temperature versus the unfilled‐clay systems. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Effect of organic modifiers and silicate type on filler dispersion,thermal, and mechanical properties of ABS‐clay nanocomposites

Acrylonitrile–butadiene–styrene (ABS)–clay composite and intercalated nanocomposites were prepared by melt processing, using Na‐montmorillonite (MMT), several chemically different organically modified MMT (OMMT) and Na‐laponite clays. The polymer–clay hybrids were characterized by WAXD, TEM, DSC, TGA, tensile, and impact tests. Intercalated nanocomposites are formed with organoclays, a composite is obtained with unmodified MMT, and the nanocomposite based on synthetic laponite is almost exfoliated. An unintercalated nanocomposite is formed by one of the organically modified clays, with similar overall stack dispersion as compared to the intercalated nanocomposites. T_g of ABS is unaffected by incorporation of the silicate filler in its matrix upto 4 wt % loading for different aspect ratios and organic modifications. A significant improvement in the onset of thermal decomposition (40–44°C at 4 wt % organoclay) is seen. The Young's modulus shows improvement, the elongation‐at‐break shows reduction, and the tensile strength shows improvement. Notched and unnotched impact strength of the intercalated MMT nanocomposites is lower as compared to that of ABS matrix. However, laponite and overexchanged organomontmorillonite clay lead to improvement in ductility. For the MMT clays, the Young's modulus (E) correlates with the intercalation change in organoclay interlayer separation (Δd₀₀₁) as influenced by the chemistry of the modifier. Although ABS‐laponite composites are exfoliated, the intercalated OMMT‐based nanocomposites show greater improvement in modulus. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A Novel Method for Manufacturing High‐Performance Layered Silicate/Epoxy Nanocomposites Using an Epoxy–Diamine Adduct to Enhance Compatibility and Interfacial Reactivity

To solve the bottlenecks of poor dispersion and weak interface in nanocomposites, a novel epoxy–diamine adduct (TMA) is synthesized by reacting the epoxy monomer with the curing agent diamine to functionalize montmorillonite (MMT), which is designed to have perfect compatibility and reactivity with the epoxy matrix. Then, pristine MMT and TMA–MMT are incorporated with epoxy resin to fabricate nanocomposites. The correlations between surface functionalization, morphology, and interfacial interaction of the sheets and the composites properties are systematically investigated. The results show that the adduct is successfully synthesized and is terminated with epoxy and amine groups. Improved dispersion/exfoliation with larger surface fractal and smaller gyration radius of TMA–MMT can be obviously observed. At 3 wt% MMT loading, both the strength and modulus obtained from tensile and flexural tests improve significantly (by ≈40%). Moreover, the nanocomposite exhibits excellent N₂ barrier properties. The gas permeability is dramatically reduced by 91% compared to that of the neat epoxy. A model for gas permeation in the nanocomposite reveals that the MMT platelets are homogeneously dispersed in the matrix. Consequently, the improved dispersion/exfoliation and enhancement of the properties confirm the superiority of the adduct generated from the matrix, providing a general method for the development of high‐performance nanocomposites.     

Photo-oxidative degradation of polypropylene/montmorillonite nanocomposites

The photo-oxidative behavior of the polypropylene (PP)/montmorillonite (MMT) nanocomposites and microcomposites has been investigated upon ultraviolet exposure using the technique of infrared spectroscopy. The rate of photo-oxidative degradation of PP/MMT nanocomposites is much faster than that of pure PP. The influence of pristine MMT, alkylammonium and compatibilizer were investigated, respectively. All these components can catalyze the photo-oxidation of PP matrix, in which the influence of compatibilizer and pristine MMT is primary. Moreover, the dispersion state of the clay particles in the polymer matrices has a little influence on the photo-oxidative degradation of polymer matrix. Consequently, an integrated catalysis mechanism of the photo-oxidative degradation of PP clay nanocomposite is proposed. It would provide benefit direction for the preparation and usage of polymer layered silicate nanocomposites (PLSN).     

Intercalated clay structures and amorphous behavior of solution cast and melt pressed poly(ethylene oxide)–clay nanocomposites

The polymer nanocomposite (PNC) films consisted of poly(ethylene oxide) (PEO) and sodium cations montmorillonite (MMT) clay were prepared by aqueous solution casting and direct melt press compounding techniques, whereas the films of PEO with trimethyl octadecyl ammonium cations organo‐modified montmorillonite (OMMT) clay were formed by melt pressed technique. The clay concentrations in the nanocomposites used are 1, 2, 3, 5, 10, and 20 wt % of the PEO weight. The X‐ray diffraction patterns of these nanocomposites were measured in the angular range (2θ) of 3.8–30°. The values of basal spacing d₀₀₁ of MMT/OMMT, clay gallery width W_cg, d‐spacings of PEO crystal reflections d₁₂₀ and d₁₁₂, and their corresponding crystallite size L, and the peaks intensity I (counts) were determined for these nanocomposites. Results reveal that the nanocomposites have intercalated clay structures and the amount of intercalation increases with the increase of clay concentration. As compared to melt pressed PEO–MMT nanocomposites, the amount of clay intercalation is higher in aqueous solution cast nanocomposites. At 20 wt % MMT dispersion in PEO matrix, the solution cast PEO–MMT nanocomposite almost changes into amorphous phase. The melt press compounded PEO–OMMT films show more intercalation as compared to the PEO–MMT nanocomposites prepared by same technique. In melt pressed nanocomposites, the PEO crystalline phase significantly reduces when clay concentration exceeds 3 wt %, which is evidenced by the decrease in relative intensity of PEO principal crystalline peaks. The effect of interactions between the functional group (ethylene oxide) of PEO and layered sheets of clay on both the main crystalline peaks of PEO was separately analyzed using their XRD parameters in relation to structural conformations of these nanocomposites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39898.     

Novel polyether polyurethane/clay nanocomposites synthesized with organicly modified montmorillonite as chain extenders

A kind of novel polyether polyurethane (PU)/clay nanocomposite was synthesized using poly(tetramethylene glycol), 4,4′‐diphenylmethane diisocyanate (MDI), 1,6‐hexamethylenediamine, and modified Na⁺‐montmorillonite (MMT). Here, organicly modified MMT (O‐MMT) was formed by applying 1,6‐hexamethylenediamine as a swelling agent to treat the Na⁺‐MMT. The X‐ray analysis showed that exfoliation occurred for the higher O‐MMT content (40 wt %) in the polymer matrix. The mechanical analysis indicated that, when the O‐MMT was used as a chain extender to replace a part of the 1,2‐diaminopropane to form PU/clay nanocomposites, the strength and strain at break of the polymer was enhanced when increasing the content of O‐MMT in the matrix. When the O‐MMT content reached about 5%, the tensile strength and elongation at break were over 2 times that of the pure PU. The thermal stability and the glass transition of the O‐MMT/PU nanocomposites also increased with increasing O‐MMT content. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 6–13, 2006     

Investigation on the Mechanical and Thermal Properties of Intercalated Epoxy/Layered Silicate Nanocomposites

Epoxy resin/layered silicate nanocomposites with various clay contents were prepared. The structural studies showed the intercalation of epoxy polymer chains into the clay galleries. The adhesion analysis of nanocomposite coating films on metallic substrates showed the excellent adhesion of epoxy-based nanocomposite coatings on iron plates, especially in lower clay loadings. According to the hardness test results, the organoclay minerals caused the increasing of the hardness of epoxy nanocomposites. The thermal properties of nanocomposites were evaluated by means of DSC and TGA analysis. The tensile and compression strengths of cured epoxy/clay systems were also investigated.     

An exfoliated clay‐poly(norbornene) nanocomposite prepared by metal‐mediated surface‐initiated polymerization

An exfoliated clay?polymer nanocomposite was prepared by surface‐initiated ring opening metathesis polymerization (SI‐ROMP) of norbornene on a montmorillonite (MMT) clay with a modified surface. Utilizing the hydrothermal‐silylation reaction between a norbornenyl‐bearing chlorosilane agent and silanol groups of the MMT clay, we were able to bind a metal alkylidene catalyst to the surface in order to grow poly(norbornene) chains directly from the surface using ROMP. Our approach produced nanocomposites having poly(norbornene) chains that are covalently attached to the inorganic substrate, as opposed to most conventional polymer‐clay composites that have ionically tethered chains (via the ammonium‐based modifiers of the organoclay) or physically adsorbed polymers. POLYM. ENG. SCI., 55:2349–2354, 2015. © 2015 Society of Plastics Engineers     

Study on the dynamic self‐organization of montmorillonite in two phases

Polycarbonate (PC)/acrylonitrile–butadiene–styrene (ABS) polymer alloy/montmorillonite (MMT) and nylon 6 (PA6)/ABS polymer alloy/MMT nanocomposites were prepared using the direct melt intercalation technique. Their structures were characterized by XRD and TEM. The results of TEM show that the silicate layers dispersed differently in two phases. In the PC/ABS/MMT nanocomposite, the silicate layers were self‐organized in the ABS phase, whereas in the PA6/ABS/MMT nanocomposite, the silicate layers were dispersed in both phases but mainly in the PA6 phase. Furthermore, the PC/MMT nanocomposite was melt‐mixed with pure ABS, and the changed morphology of the hybrid with the change of melt‐mixing time was characterized by XRD and TEM, to study the dynamic self‐assembly of clay layers in two phases. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1457–1462, 2004     

Nanofibrillated cellulose,poly(vinyl alcohol), montmorillonite clay hybrid nanocomposites with superior barrier and thermomechanical properties

Nanocomposites of poly(vinyl alcohol) (PVA), nanofibrillated cellulose (NFC), and montmorillonite (MMT) clay were prepared via solvent casting. In addition to investigating the effect of clay loading, PVA matrices crosslinked with poly(acrylic acid) (PAA) were prepared and compared with linear (noncrosslinked) PVA nanocomposites. ¹³C NMR and infrared spectroscopy confirmed the presence of crosslinks. Scanning electron microscopy revealed effective NFC and MMT clay dispersion throughout the nanocomposites, while X‐ray diffraction highlighted the effectiveness of PAA to encourage clay dispersion. MMT clay provided a barrier against the diffusion of water and oxygen (molecules) through the nanocomposite films. Permeability and adsorption were further reduced by crosslinking, while oxygen barrier properties were remarkably enhanced at elevated relative humidities. Thermal stability of the PVA segments was strengthened by the presence of MMT clay and crosslinks. MMT clay–reinforced PVA and NFC within the films, increasing the Young's modulus, tensile strength, and glass transition temperature. Crosslinking further enhanced the thermomechanical properties by imparting physical restraints on polymer chain segments, providing elasticity, and ductility. The hybrid films were successfully reinforced at elevated humidities, with nanocomposites displaying enhanced storage moduli and near‐complete recovery. POLYM. COMPOS., 35:1117–1131, 2014. © 2013 Society of Plastics Engineers     

A short review on rubber/clay nanocomposites with emphasis on mechanical properties

The invention of Nylon‐6/clay nanocomposites by the Toyota Research Group of Japan heralded a new chapter in the field of polymer composites. This article highlights the work done in the field of rubber/clay nanocomposites. The preparations of rubber/clay nanocomposites by solution blending, latex compounding, and melt intercalation are covered and a thorough discussion of the mechanical properties of the various rubber/clay nanocomposite systems is presented. Other properties such as barrier, dynamic mechanical behavior, and thermal properties are also discussed. Finally, the future trends in the rubber/clay nanocomposites are mentioned. POLYM. ENG. SCI., 47:1956–1974, 2007. © 2007 Society of Plastics Engineers     

New method for the synthesis of clay/epoxy nanocomposites

A new liquid–liquid method for the synthesis of epoxy nanocomposites was developed. This new method improved the dispersion and exfoliation of the organoclay in the polymer matrix, thus improving the end‐use properties. The microstructure and physical properties of the clay/epoxy nanocomposite synthesized by the new method were studied. Rheological tests of the uncured epoxy–organoclay system demonstrated that this method resulted in a great increase in viscosity, much more than the most commonly used direct‐mixing method. The Krieger–Dougherty model successfully described the dispersion of the clay layers in the uncured epoxy. In the 5 wt % organoclay nanocomposite, compressive tests on the cured samples showed that there was a 45% increase in the maximum strength, a 10% increase in the yield strength, and a 26% increase in the modulus over the pure epoxy–amine cured system. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4286–4296, 2006