Structure and photoluminescence of ZnGa<Subscript>2</Subscript>Se<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>

The structure of undoped and europium-doped ZnGa₂Se₄ has been studied, and the interplanar spacings, the Miller indices of the observed reflections, and their relative intensities have been determined. The photoluminescence spectra of ZnGa₂Se₄ and ZnGa₂Se₄:Eu²⁺ crystals have been measured at temperatures from 77 to 230 K. The 566-nm band in the spectrum of ZnGa₂Se₄:Eu²⁺ is assigned to the Eu²⁺4f ⁶5d→4f ⁷(⁸ S _7/2) electronic transition, and the bands at 591 and 646 nm are attributed to transitions of donor-acceptor pairs.     

Luminescence properties and electronic structure of Sm<Superscript>3+</Superscript>-doped YAl<Subscript>3</Subscript>B<Subscript>4</Subscript>O<Subscript>12</Subscript>

The luminescence properties of Sm³⁺ ions in YAl₃B₄O₁₂ were studied upon synchrotron excitation in the 3.8–11 eV region. In addition to the 4f → 4f excitation bands, the excitation spectra of the Sm³⁺ emission contain broad bands at 6.1 and ~7.0 eV. These bands are attributed to charge transfer transition in Sm³⁺–O²⁻ complexes and 4f → 5d transition of Sm³⁺ ions, respectively. The optical absorption edge of YAl₃B₄O₁₂ was determined at 7.3 eV. A comparison with the results of electronic structure calculations on YAl₃B₄O₁₂ is also made.     

Combusion synthesis,structural and photo-physical characteristics of Eu<Superscript>2+</Superscript> and Dy<Superscript>3+</Superscript> co-doped SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript> phosphor nanopowders

In this research, we reported the synthesis of Eu²⁺ and Dy³⁺ co-doped SrAl₂O₄ phosphor nanopowders with high brightness and long afterglow by urea-nitrate solution combustion synthesis (SCS) at 600 °C, followed by heating the resultant combustion ash at 1,200 °C in a weak reductive atmosphere (5% H₂ + 95% N₂). The broad-band UV-excited luminescence of the SrAl₂O₄: Eu²⁺, Dy³⁺ nanopowders was observed at λ _max = 517 nm due to transitions from the 4f⁶5d¹ to the 4f⁷ configuration of the emission center (Eu²⁺ ions). The excitation spectra consist of 240- and 254 nm broad peaks. Finally, it was found that the optimum ratio of urea is 2.5 times higher than theoretical quantities for the best emission condition of SrAl₂O₄: Eu²⁺, Dy³⁺ phosphor nanopowders.     

Synthesis and photoluminescence properties of Eu<Superscript>3+</Superscript>-activated SrZnO<Subscript>2</Subscript>

Synthesis, X-ray diffraction, and photoluminescence (PL) investigations of SrZnO₂ doped with Eu³⁺ were carried out in order to characterize the material. The emission spectra showed a broad band emission at 525 nm attributed to oxygen defect centers in the host matrix, along with peaks corresponding to the ⁵D₀ → ⁷F _j (j = 1, 2) transitions of Eu ion under 250 nm excitation. PL decay time studies were done to confirm these investigations. Time-resolved emission spectrometric (TRES) study was carried out to extract the emission spectra of the Eu ion which was buried under the broad band emission. After giving suitable delay times and by choosing a proper time gate, transitions due to ⁵D₀ → ⁷F _j (j = 0, 1, 2, 3, and 4) could be observed. Judd–Ofelt intensity parameters and other radiative properties for the system were evaluated from this emission spectrum and decay time data by adopting standard procedure. The color coordinates of the system were also evaluated and plotted on a standard CIE index diagram. The observations showed that the SrZnO₂:Eu³⁺material has near white light emission (also considering the emission from host) whereas, the extracted emission spectrum due to only Eu ions has a near red emission.     

Effect of secondary heat treatment on the spectroscopic properties of Na<Subscript>2</Subscript>O-Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

We have studied the optical absorption and luminescence spectra of 45Na₂O · xNb₂O₅ · (55 − x)P₂O₅ glasses containing 5, 10, 20, 25, 30, and 35 mol % Nb₂O₅. The results indicate that the absorption band around 26000 cm⁻¹, responsible for the yellow color of the glasses, is due to the [Nb^(5+)--O⁻] center and disappears upon secondary heat treatment. Heat treatment of europium-doped glasses increases the concentration of Eu³⁺ centers in an asymmetric environment, which is accompanied by an increase in luminescence efficiency. The reason for this is that the Eu³⁺ ions are located outside the niobate subsystem of the glass matrix. The europium in the glasses studied acts as a protector ion.     

Preparation and characterization of Eu<Superscript>3+</Superscript> activated CaSiO<Subscript>3</Subscript>, (CaA)SiO<Subscript>3</Subscript> [A = Ba or Sr] phosphors

Eu³⁺ activated CaSiO₃, (Ca, Ba) SiO₃ and (Ca, Sr) SiO₃ have been prepared by sol-gel technique. Residual solvent and organic contents in the gel were removed by firing at 100°C for 3–4 h at 300 and 600°C for 2 h. Small exothermic shoulder around 850 to 875°C, as observed in DTA curve, corresponds to crystallization temperature of the doped calcium silicate. Influence of firing temperature on the luminescence of Eu³⁺ shows the maximum emission intensity in gel fired at 850°C. Photoluminescence emission peak is observed at 614 nm due to⁵D₀ →⁷F₂ transition of Eu³⁺ ion in (Ca, Ba) SiO₃ and (Ca, Sr) SiO₃ phosphors, when excited by 254 nm. The (Ca, Ba) SiO₃ material is proposed as an efficient red phosphor.     

Luminescence of Ce<Superscript>3+</Superscript> ion doped in SrZn<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript> phosphor under excitation of vacuum ultraviolet

Ce³⁺ doped SrZn₂(PO₄)₂ was prepared by high temperature solid-state reaction. The phosphor was investigated by X-ray powder diffraction, scanning electron microscope, and FT-IR measurements. Spectroscopic properties of the phosphor were characterized by vacuum ultraviolet spectroscopy. According to the excitation spectrum, the five 5d levels corresponding to the 4f ¹ → 4f ⁰5d ¹ transitions of Ce³⁺ ions were clearly identified. The observed excitation bands in the VUV region are due to the PO₄³⁻ anion groups of the host, in which energy transfer to Ce³⁺ ions is rather efficient. The emission bands corresponding to the 4f ¹ → 4f ⁰5d ¹ transitions of Ce³⁺ ions were analyzed. The barycenter of Ce³⁺ ions, host absorption bands, crystal field splitting, emission wavelength and Stokes shift were calculated and discussed.     

Synthesis and photoluminescence properties of LiEu(W,Mo)<Subscript>2</Subscript>O<Subscript>8</Subscript>:Bi<Superscript>3+</Superscript> red-emitting phosphor for white-LEDs

LiEu_1−x (W_2−y Mo _y )O₈:xBi³⁺ series red-emitting phosphors were synthesized by solid state reaction. The structure, morphology, and photoluminescent properties of phosphors were studied by X-ray powder diffraction, scanning electron microscopy, and photoluminescence spectrum, respectively. X-ray powder diffraction analysis showed that the as-obtained phosphors belong to the scheelite structure. The average particle size of the investigated phosphor was about 8 μm. The excitation spectrum exhibits a charge-transfer broad band along with some sharp peaks from the typical 4f–4f transitions of Eu³⁺. Under excitation of UV, near-UV, or blue light, these phosphors showed strong red emission at 615 nm due to ⁵D₀–⁷F₂ transition of Eu³⁺. The incorporation of Mo⁶⁺ into LiEuW₂O₈:Bi³⁺ could induce red-shift of the charge-transfer broad band and a remarkable increase of photoluminescence. The highest red-emission intensity was observed with LiEu_0.80Mo₂O₈:0.20Bi³⁺. Compared with the commercial red-emitting phosphor, Y₂O₂S:Eu³⁺, the emission intensity of LiEu_0.80Mo₂O₈:0.20Bi³⁺ phosphor is much stronger than that of Y₂O₂S:Eu³⁺ and its chromaticity coordinates are closer to the standard values than that of the commercial phosphor. The optical properties of LiEu_0.80Mo₂O₈:0.20Bi³⁺ phosphor make it attractive for the application in white-light-emitting diodes (LEDs), in particular for near-UV InGaN-based white-LEDs.     

Rapid synthesis and enhancement in down conversion emission properties of BaAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>,RE<Superscript>3+</Superscript> (RE<Superscript>3+</Superscript>=Y,Pr) nanophosphors

BaAl₂O₄:Eu²⁺,RE³⁺ (RE³⁺=Y, Pr) down conversion nanophosphors were prepared at 600 °C by a rapid gel combustion technique in presence of air using boron as flux and urea as a fuel. A comparative study of the prepared materials was carried out with and without the addition of boric acid. The boric acid was playing the important role of flux and reducer simultaneously. The peaks available in the XPS spectra of BaAl₂O₄:Eu²⁺ at 1126.5 and 1154.8 eV was ascribed to Eu²⁺(3d _5/2) and Eu²⁺(3d _3/2) respectively which confirmed the presence of Eu²⁺ ion in the prepared lattice. Morphology of phosphors was characterized by tunneling electron microscopy. XRD patterns revealed a dominant phase characteristics of hexagonal BaAl₂O₄ compound and the presence of dopants having unrecognizable effects on basic crystal structure of BaAl₂O₄. The addition of boric acid showed a remarkable change in luminescence properties and crystal size of nanophosphors. The emission spectra of phosphors had a broad band with maximum at 490–495 nm due to electron transition from 4f ⁶5d ¹ → 4f ⁷ of Eu²⁺ ion. The codoping of the rare earth (RE³⁺=Y, Pr) ions help in the enhancement of their luminescent properties. The prepared phosphors had brilliant optoelectronic properties that can be properly used for solid state display device applications.     

Luminescence Study of LiY<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Eu<Subscript>x</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>2</Subscript>

The luminescence spectra of LiY_{1 − x} Eu_x(MoO₄)₂ (x = 0.0005, 0.001, 0.01, 0.05, 0.1, 0.5, 1) scheelite solid solutions are measured under laser excitation at 337.1 nm. The effect of Eu³⁺ concentration on the luminescence behavior of the solid solutions is examined. The highest integrated emission intensity is offered by LiY_0.5Eu_0.5(MoO₄)₂. Eu³⁺ substitution for Y³⁺ has no effect on the symmetry of the emission centers involved. Eu³⁺ is shown to occupy only one site in the structure of the solid solutions. X-ray diffraction and luminescence data indicate that all of the solid solutions have an undistorted scheelite structure.__________Translated from Neorganicheskie Materialy, Vol. 41, No. 7, 2005, pp. 871–875.Original Russian Text Copyright © 2005 by Zaushitsyn, Mikhailin, Romanenko, Khaikina, Basovich, Morozov, Lazoryak.     

Temperature effect on the photoluminescence intensity and Eu<Superscript>2+</Superscript> excited state lifetime in EuGa<Subscript>2</Subscript>S<Subscript>4</Subscript> and EuGa<Subscript>2</Subscript>S<Subscript>4</Subscript>:Er<Superscript>3+</Superscript>

The photoluminescence (PL) spectra and Eu²⁺ excited state lifetime of EuGa₂S₄ and EuGa₂S₄:Er³⁺ have been studied in the range 78–500 K. The spectra show a band at 545 nm, due to the 4f ⁶5d → 4f ⁷(⁸ S _7/2) transition. With increasing temperature, the full width at half maximum Γ(T) of the PL band of EuGa₂S₄ and EuGa₂S₄:Er³⁺ crystals increases from 0.15 to 0.22 and from 0.13 to 0.19 eV, respectively. Over the entire temperature range studied, Γ(T) is a linear function of T ^1/2. The 545-nm emission intensity and Eu²⁺ excited state lifetime in EuGa₂S₄ and EuGa₂S₄:Er³⁺ vary exponentially with temperature. The luminescence quenching energies evaluated from the Arrhenius plots of I(10³/T) and τ(10³/T) coincide (0.10 eV) within the error of determination.     

Synthesis,photoluminescence and mechanoluminescence properties of Eu<Superscript>3+</Superscript> ions activated Ca<Subscript>2</Subscript>Gd<Subscript>2</Subscript>W<Subscript>3</Subscript>O<Subscript>14</Subscript> phosphors

A new series of Eu³⁺ ions-activated calcium gadolinium tungstate [Ca₂Gd₂W₃O₁₄] phosphors were synthesized by conventional solid-state reaction method. The X-ray diffraction patterns of the powder samples indicate that the Eu³⁺: Ca₂Gd₂W₃O₁₄ phosphors are of tetragonal structure. The prepared phosphors were well characterized by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), Fourier transform infrared spectroscopy (FTIR), photoluminescence (PL), and mechanoluminescence (ML) spectra. PL spectra of Eu³⁺: Ca₂Gd₂W₃O₁₄ powder phosphors have shown strong red emission at 615 nm (⁵D₀ → ⁷F₂) with an excitation wavelength λ _exci = 392 nm (⁷F₀ → ⁵L₆). The energy transfer from tungstate groups to europium ions has also reported. Mechanoluminescence studies of Eu³⁺: Ca₂Gd₂W₃O₁₄ phosphors have also been explained systematically.     

Ce and Eu activated Na<Subscript>2</Subscript>Zn<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>4</Subscript>, a new promising novel phosphor

A new efficient phosphor, Eu²⁺/Eu³⁺ and Ce³⁺ activated Na₂Zn₅(PO₄)₄ has been synthesized by solid-state reaction technique at high temperature. X-ray powder diffraction analysis confirmed the formation of Na₂Zn₅(PO₄)₄ host lattice. Scanning electron microscopy indicated that the microstructure of the phosphor consisted of irregular fine grains with a size of about 0·5–2 μm. Photoluminescence excitation spectrum measurements of Ce³⁺ activated Na₂Zn₅(PO₄)₄ show that the phosphor can be efficiently excited by UV-Vis light from 280 to 310 nm to realize emission in the visible (blue) range due to the 5d-4f transition of Ce³⁺ ions which is applicable for scintillation purpose, whereas Eu²⁺/Eu³⁺ activated Na₂Zn₅(PO₄)₄ phosphor emits blue, green and red emission spectrum shows at 487 nm, 546 nm with a dominant peak at 611 nm respectively, due to Eu²⁺/Eu³⁺ ions which is promising candidate for solid state lighting. Therefore, newly synthesised, by low cost and easy technique prepared, novel phosphors may be useful as RGB phosphor for solid state lighting application.     

Photoluminescence properties of a novel red-emitting phosphor Ba<Subscript>2</Subscript>LaV<Subscript>3</Subscript>O<Subscript>11</Subscript>:Eu<Superscript>3+</Superscript>

Ba₂LaV₃O₁₁:Eu³⁺ phosphors were firstly synthesized by the traditional solid-state reaction method at 1100 °C. Their luminescence properties were investigated by photoluminescence excitation and emission spectra. The excitation spectrum shows a broad band centered at about 275 nm in the region from 200 to 370 nm, which is attributed to an overlap of the charge transfer transitions of O^2??→?V⁵⁺ and O^2??→?Eu³⁺. The phosphors exhibit the red emissions of Eu³⁺ and the emission intensity ratio of ⁵D₀?→?⁷F₂ to ⁵D₀?→?⁷F₁ is dependent on the Eu³⁺ concentration due to an environment change about Eu³⁺ ions. Concentration quenching occurs at 30 mol% in the phosphors and exchange interaction is its main mechanism. Ba₂LaV₃O₁₁:Eu³⁺ displays tunable CIE color coordinates from yellow orange to red depended on Eu³⁺ content, which may have a potential application for illuminating and display devices.     

Effect of Pr<Superscript>3+</Superscript> on the stokes luminescence of YPO<Subscript>4</Subscript>:Nd<Superscript>3+</Superscript> under IR excitation

We have identified general relationships between the spectral and kinetic properties of the IR Stokes luminescence bands of Y_{1 − x − y} Nd _x Pr _y PO₄ solid solutions in the spectral range 0.86–1.40 μm under 0.810-μm laser excitation. The results have been used to formulate technical requirements for the purity of rare-earth oxides for the fabrication of efficient YPO₄:Nd³⁺ IR phosphors and to develop a fast YPO₄:Nd³⁺, Pr³⁺ IR phosphor that allows the decay time of the Nd³⁺ IR Stokes luminescence bands in the range 0.86–1.40 μm to be tuned from 50 to 170 μs by varying the ratio of the Nd³⁺ and Pr³⁺ concentrations.     

Optical properties of Eu<Superscript>3+</Superscript> activated SrLa<Subscript>2</Subscript>O<Subscript>4</Subscript> red-emitting phosphors for WLED applications

The SrLa_2?xO₄:xEu³⁺ phosphors are synthesized through high-temperature solid-state reaction method at 1473 K with various doping concentration. Their phase structures, absorption spectra, and luminescence properties are investigated by X-ray diffraction (XRD), UV–Vis spectrophotometer and photoluminescence spectrometry. The intense absorption of SrLa_2?xO₄:xEu³⁺ phosphors have occurred around 400 nm. The prominent luminescence spectra of the prepared phosphors exhibited bright red emission at 626 nm. The doping concentration 0.12 mol% of Eu³⁺ is shown to be optimal for prominent red emission and chromaticity coordinates are x?=?0.692, y?=?0.3072. Considering the high colour purity and appropriate emission intensity of Eu³⁺ doped SrLa₂O₄ can be used as red phosphors for white light emitting diodes (WLEDs).     

Luminescence properties of monodispersed spherical BaWO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript> microphosphors for white light-emitting diodes

Monodispersed spheres (1–4 μm in diameter) of BaWO₄:Eu³⁺ (hereafter BWO:Eu) red-phosphor exhibiting intense emission at 615 nm were synthesized via a mild hydrothermal method. X-ray diffraction, scanning electron microscope, photoluminescence excitation and emission spectra, and decay curve were used to characterize the properties of BWO:Eu phosphors. An intense red emission was obtained by exciting either into the ⁵L₆ state with 394 nm or the ⁵D₂ state with 465 nm, that correspond to two popular emission lines from near-UV and blue LED chips, respectively. The values of Ω _2,4 experimental intensity parameters (13.8 × 10⁻²⁰ and 8.2 × 10⁻²⁰ cm²) are determined. The high-emission quantum efficiency of the BWO:Eu phosphor suggests this material could be promising red phosphors for generating white light in phosphor-converted white light-emitting diodes.     

Thermodynamic properties of NaZr<Subscript>2</Subscript>(AsO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The heat capacity C _p ⁰ of crystalline NaZr₂(AsO₄)₃ has been measured in the range 7–650 K using precision adiabatic calorimetry and differential scanning calorimetry. The experimental data have been used to calculate the standard thermodynamic functions of the arsenate: C _p ⁰, enthalpy H ⁰(T) − H ⁰(0), entropy S ⁰(T), and Gibbs function G ⁰(T) − H ⁰(0) from T → 0 to 650 K. The standard entropy of its formation from elements is Δ_f S ⁰(NaZr₂(AsO₄)₃, cr, 298.15 K) = −1087 ± 1 J/(mol K).     

Synthesis of Er<Superscript>3+</Superscript> and Er<Superscript>3+</Superscript> : Yb<Subscript>3+</Subscript> doped sol-gel derived silica glass and studies on their optical properties

Er₃₊ and Er₃₊ : Yb₃₊ doped optical quality, crack and bubble free glasses for possible use in making laser material have been prepared successfully through sol-gel route. The thermal and optical, including UV-visible absorption, FTIR etc characterizations were undertaken on the samples. The absorption characteristics of Er₃₊ doped samples clearly revealed the absorption due to Er₃₊ ions. On the other hand Yb₃₊ : Er₃₊ doped samples showed enhanced absorption due to² F _7/2 →² F _5/2 transition. The absorption and emission cross-section for² F _7/2 ↔² F _5/2 of Yb³⁺ were estimated. FTIR absorption spectra have clearly shown the reduction of the absorption peak intensity with heat treatment in the range 3700–2900 cm⁻¹. The 960 cm^-1 band also showed progressive decrease in the absorption band peak intensity with heat treatment. The result of the investigations with essential discussions and conclusions have been reported in this paper.     

A novel blue emitting phosphor NaBa<Subscript>0.98</Subscript>Eu<Subscript>0.02</Subscript>PO<Subscript>4</Subscript> and the improvement of its luminescence properties

A novel blue-emitting phosphor NaBa_0.98Eu_0.02PO₄ was synthesized by conventional solid state reaction, and it exhibits efficient blue emission under near-ultraviolet (n-UV) excitation. The emission spectrum shows a single band centered at about 440 nm, which corresponds to the 4f⁶5d¹-4f⁷ transition of Eu²⁺. The excitation spectrum is a broad band in the wavelength range between 200 and 450 nm, which can match the emission of white light emitting diodes (LEDs) by the method of n-UV conversion. The Ca²⁺, Sr²⁺ and Mg²⁺ were co-doped into NaBa_0.98Eu_0.02PO₄ respectively. Special attention was paid to the sample co-doped with Ca²⁺ that could possess a higher luminous efficacy than the analogs co-doped with Sr²⁺ and Mg²⁺. With the co-doping of Ca²⁺, the enhanced intensity of the excitation and emission band appears. The optimum co-doping concentration of Ca²⁺ is 7 mol.%. The emission intensity of NaBa_0.91Ca_0.07Eu_0.02PO₄ phosphoris about 1.68 times than that of NaBa_0.98Eu_0.02PO₄ phosphor. The as-prepared phosphors are the potential blue phosphors for application in white LEDs.