共查询到20条相似文献,搜索用时 83 毫秒
1.
随着时代的进步和发展,超声波检测技术的应用日渐广泛,并在多渠道应用中展现出了其自身的独特优势。尤其在高温冶金过程中,超声波检测技术的应用与其他检测技术更有不同,不仅能够实现高温金属材料的效能检测,而且能够达到检测深度的强化。本文就超声波检测技术在高温冶金中的应用进行分析,希望可以为超声波检测技术的更好应用提供借鉴。 相似文献
2.
《中国金属通报》2020,(1)
钢铁行业是影响国家经济发展的重要产业,随着社会的发展,机械制造、城市建设等领域对钢材质量的要求越来越高,为了满足社会发展的需求,钢铁行业必须提升钢材质量水平。将自动化技术应用于钢铁冶金行业之中,通过对钢铁冶金全流程控制可促进钢材质量的提升,同时钢铁行业实现冶金自动化,可以显著提升钢材生产效率,改善企业生产安全和职业健康水平,这对钢铁冶金行业的可持续发展有着积极的促进作用。钢铁冶金行业加强自动化技术的应用,也能让钢铁冶金企业更加适应市场环境,这符合当今时代的发展趋势,为此我们要加强对冶金自动化技术的研究与推广。本文对钢铁冶金自动化技术的应用做出分析,并对冶金自动化技术的未来发展进行展望,以供参考。 相似文献
3.
4.
5.
6.
概述近年微波及超声波在钨冶金生产工艺中的应用研究进展,简介其应用工艺和技术.主要从微波在钨冶金中应用:促进黑、白钨矿浸出;促进含钨化合物合成;烧结含钨化合物与热分解制备三氧化钨;超声波在钨冶金中应用:强化钨矿浸出及仲钨酸铵结晶;辅助制备含钨化合物;工业探伤应用等领域进行介绍.微波及超声波技术在钨冶金中应用将越来越广泛和深入. 相似文献
7.
8.
9.
10.
简要介绍功率超声及其在液体介质中的作用机制,对功率超声应用于钢铁冶金过程的脱气,夹杂物处理,凝固过程的研究和进展进行了概述,指出了功率超声应用于钢铁冶金工业化的关键技术,努力方向和应用前景。 相似文献
11.
介绍了中厚钢板自动超声波探伤的发展情况,阐述了中厚钢板自动超声波探伤系统的技术与应用。自动超声波探伤技术对钢板缺陷检测分析具有较好的实用价值。 相似文献
12.
The influence of ultrasonic treatment on solidification structure of high carbon steel with the addition of rare earth Ce was investigated. Effects of various ultrasonic power and treatment time on the solidification structure were studied. The results showed that ultrasonic treatment could obviously refine the solidification structure of high carbon steel containing rare earth Ce. With increasing ultrasonic power, a more refined structure could be obtained. When the ultrasonic power exceeded a certain degree, the effects of ultrasound on structure refinement were not increased significantly. Dendrites developed in the solidifying structure when the ultrasonic treatment times were 0 s and 20 s. However, a uniform and refined dendrite structure was obtained after ultrasonic treatment for 40 s. The solidification structure refinement of high carbon steel containing Ce was ascribed to the increased amount and decreased size of rare earth oxides and oxysulfides by ultrasonic cavitation, which could serve as heterogeneous nuclei of a new crystal phase. 相似文献
13.
对W16MnRQ钢板超声波探伤不合格的试样进行了分析研究,查明了探伤不合格的主要原因是裂纹与MnS链状夹杂物。采取改进炉外精炼及轧制工艺等措施,提高了W16MnRQ钢板的超声波探伤合格率。 相似文献
14.
15.
研究了超声处理对高碳钢铸锭内气孔的影响。研究结果表明,在1 510 ℃较低温度的高碳钢液中进行超声处理后,铸锭内产生大量气孔;增大超声波功率、提高超声处理温度、采用冷却速度相对较慢的随炉冷却方式均可以降低超声处理后铸锭中气孔率。在1 570 ℃的较高温度下,超声处理具有一定程度的脱气作用,可以明显降低高碳钢铸锭中氮的质量分数,由未经超声处理时的97×10-6降低到处理后的49×10-6。 相似文献
16.
超声波作用下不同添加剂对高碳钢凝固组织的影响 总被引:2,自引:0,他引:2
主要研究了在超声波作用下不同添加剂对高碳钢凝固组织的影响。结果表明:在超声波作用下,高碳钢液中添加钛铁、铈可以明显细化其凝固组织,但是添加铝对其凝固组织的细化作用不明显。高碳钢凝固组织的细化是由于Ti(C,N)可以作为非均质形核的核心,促进高碳钢液凝固过程的形核,Ti(C,N)有效的钉扎晶界作用,阻止初生奥氏体晶粒的长大;超声空化作用下稀土氧化物、氧硫化物数量的增多,增加了高碳钢液凝固过程中非均质形核核心的数量。 相似文献
17.
18.
19.
为提高Q370qE钢板的超声波探伤合格率,取样分析了Q370qE钢板超声波探伤不合原因,结果表明其探伤不合格主要源于钢中非金属夹杂物、中心严重偏析所造成的钢板分层、连铸保护渣和耐火材料的卷入以及铸坯裂纹等。通过采取提高钢纯净度、改变夹杂物形态、控制浇注温度和拉速等措施后,钢板探伤合格率由75%提高到97%。 相似文献
20.
《钢铁研究学报(英文版)》2016,(8):772-777
To achieve ultrasonic casting of 35CrMo steel,the waveguide unit for introducing ultrasound into liquid steel was studied numerically and experimentally.The structure and length of the ultrasonic waveguide were opti-mized by modal analysis.The simulation results showed that a T-shaped waveguide unit matched the vibrational sys-tem better than an L-shaped unit.The performance of T-shaped waveguide unit was optimized when the length of the ultrasound radiator was 135 mm.The performance of the T-shaped waveguide unit was investigated in ultrasonic casting experiments,and the effect of ultrasound on the microstructure of 35CrMo steel was examined.The experi-mental results showed that the T-shaped waveguide was able to successfully introduce ultrasound into the 35CrMo melt.In addition,the use of a silicon nitride ceramic radiator avoided high-temperature corrosion in the molten metal. The microstructure of the treated area was significantly refined and equiaxed grains were obtained.The results repre-sented a novel method for ultrasonic casting of steel. 相似文献