共查询到20条相似文献,搜索用时 390 毫秒
1.
氧化锌对高胶凝性水泥熟料矿物形成及强度的影响 总被引:4,自引:0,他引:4
采用工业原料配料,对以硅酸三钙(C3S,C=CaO,S=SiO2)、硫铝酸钙(C4A3 S^-,C=CaO,A=Al2O3,S^-=SO4^2-)为主导矿物的含C4A3 S^-矿物硅酸盐水泥熟料的矿物形成及其强度进行了研究。借助X射线衍射和热重一差热分析研究了矿物形成过程;探讨了微量元素ZnO对熟料性能的影响及在熟料体系中的固溶情况。研究结果表明:生料中掺入ZnO可使C4A3 S^-和CaS等矿物通过低温反应形成,共存于同一熟料体系中,并可提高熟料的强度;过高的ZnO含量亦会降低C4A3 S^-矿物的分解温度。 相似文献
2.
熟料易磨性不仅受化学和矿物组成的影响,而且受熟料生产工艺参数如生料细度和均匀性、熟料煅烧温度、燃料类型、冷却速度、次要组分和微量元素等因素的影响。生料细度粗、不均匀,则熟料中有大尺寸贝利特巢和在煅烧过程未完全起化学反应的粗石英颗粒(〉45μm),过粗的石英颗粒减少阿利特生成量,熟料难磨。慢冷熟料难磨, 相似文献
3.
4.
欧洲水泥窑系统应用替代燃料量已达传统燃料的17%,因此很关注排放物特别是微量元素尤其是重金属的排放。在熟料煅烧和水泥生产过程中,微量元素可能进入熟料,或进入废气从烟囱排放或保留在废气处理设备中。 相似文献
5.
水泥厂利用废弃物的有关问题(二)--微量元素在水泥回转窑中的状态特性 总被引:12,自引:4,他引:12
0引言微量元素对人和动植物的危害,近十几年受到格外重视,尤其微量重金属对人体健康的危害已是发达国家当前亟待解决的污染难题。水泥工业在使用天然原燃料时,产品和排放物中的微量元素含量与当地地壳自然含量(又称本底含量)相差不多。在使用劣质原燃料和废弃物时某些元素会由于来源量大,产生富集,就有可能对环境造成污染。因此在水泥窑利用废弃物之前必须清楚有关微量元素在水泥熟料煅烧过程及水泥应用中的状态特性、危害程度,由此作出可否利用和如何利用的正确判断。1微量元素的界定所谓微量元素有几种界定方法。在自然界将地壳… 相似文献
6.
介绍了微量元素对窑况、熟料质量的影响原理;非挥发性与挥发性组份对煅烧质量的影响以及微量元素组份间相互影响共同作用于熟料矿物。认识和掌握这些微量组分的作用规律,控制熟料的最佳成分,从而保证水泥生产质量。 相似文献
7.
微量元素对水泥生产中熟料烧成的影响,分析了以电石渣为主要钙质原料生产水泥时,生料掺入石灰石的必要性和适宜的掺量。 相似文献
8.
新型干法水泥企业生产的熟料一般强度高且稳定,如果想得到稳定和高强度的熟料,生产企业在整个生产管理过程中,做好全方位的稳定控制和管理尤其重要.熟料质量的提高和稳定主要影响环节表现在两个方面:一是生料配料和熟料KH、SM、IM三率值定位,以及原材料和熟料中微量元素成分多少对熟料强度影响:二是回转窑系统煅烧和冷却,对熟料矿物组织结构形成变化影响. 相似文献
9.
在水泥生料中掺入适量的磷渣作为原料可代替部分石灰石、黏土质原料进行配料,磷渣中的P2O5、F-等微量元素对熟料的煅烧具有矿化作用,可以降低熟料的烧成温度,减少熟料的热耗,还可以提高熟料质量,进而增加混合材的掺入量,降低企业生产成本。 相似文献
10.
随着水泥工业的高速发展,各种工业废弃物在水泥企业中大量应用。炼钢生产过程中不可避免的产生废渣及钢渣,目前炼钢废渣的产量大约是钢产量的11%~15%。根据国家统计局数据统计,2021年全国粗钢产量10.35亿t,则钢渣产量至少1.1亿t。某地钢渣经检测,化学成分主要为SiO2、Al2O3、Fe2O3、CaO、MgO,与水泥熟料的化学成分相似,并含有P2O5、MnO等微量元素,这些成分不仅能改善生料易烧性还能促进熟料矿物C3S、C2S等的形成,有利于熟料烧结[1]。我公司在2 500 t/d熟料生产线上进行钢渣替代部分铜矿渣生产普通熟料,不仅达到了钢渣资源化的目的,还有利于提高熟料产质量,收到了良好的社会效益和经济效益。 相似文献
11.
12.
13.
14.
Kaissar M. Hanna Aly Afify 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》1977,27(1):25-29
Grinding tests were conducted in a laboratory steel ball mill, to investigate the grind-ability of some natural and artificial materials as “additions” for incorporation in Portland cement. Strength tests were performed on mixed cements composed of 71% Portland cement clinker, 25% addition and 4% gypsum. In one series of experiments, the components of the mixed cement were separately ground and in another one they were simultaneously ground. It was found from surface production curves and from compressive strength data that when materials which are harder to grind than clinker such as sand are interground with clinker, the resulting cement develops higher early strength than a corresponding cement in which the pozzolanic addition is softer than clinker. For materials which are softer to grind than clinker, separate grinding of the cement components is better than combined grinding, particularly for the development of early strength. 相似文献
15.
16.
17.
Burning of industrial wastes in cement kilns has an increasing environmental importance, brought about by the incorporation of potentially hazardous elements into clinker crystalline phases and partial substitution of primary fuel and raw materials. In this study, experimental clinkers were synthesized, with the addition of V, Zn and Pb to a standard raw meal, from which a control clinker was obtained for comparison. The three metals were chosen as they are present in the alternative fuel petcoke (V) and in industrial wastes (Zn, Pb) commonly burned in cement kilns. Electron microprobe and scanning electron microscope analysis revealed the preferential partition of these metals among the clinker crystalline phases. It was observed that V has shown a preferential partition towards C2S. Zn appears in higher amounts in periclase, and C3S has higher Zn contents than C2S. Pb concentrates in minute spherules and partitions toward C3S in small amounts. 相似文献
18.
19.