共查询到18条相似文献,搜索用时 312 毫秒
1.
2.
微波水分测量技术发展历史及微波水分计制造业现状 总被引:6,自引:0,他引:6
微波水分测量是测量同体和液体物质中水分的一种重要方法。本文介绍微波水分测量技术的发展历史及微波水分计制造业的现状,列出了主要制造商的名单。 相似文献
3.
基于微波的粮食水分智能化测试仪 总被引:2,自引:0,他引:2
吴才章 《仪表技术与传感器》2010,(11)
为了测定粮食中的水分,系统以STC89C58为控制核心,通过重量采集装置BS-124S采集样品的重量数据,单片机可以控制微波装置以不同的强度对样品进行快速干燥,通过步进电机控制样品托盘,对四组样品进行依次称量,实现了对多个样品水分的准确快速的检测.系统具有良好的人机交互功能,通过LCD显示模块可以对所有的设置和测量参数进行实时显示,通过键盘输入模块可实现微波加热时间、微波加热强度等功能的设置. 相似文献
4.
5.
6.
石萌杨理践高松巍刘斌王国庆 《仪表技术与传感器》2022,(3):114-121
针对钢板表面裂纹检测的问题,提出了钢板表面裂纹的微波检测方法。基于麦克斯韦方程,计算出矩形波导内的电场及磁场分布方程,推导出矩形波导壁的管壁电流方程,阐述钢板表面裂纹处的微波信号形成机理。对裂纹处的反射系数及回波损耗、波导内各处的管壁电流进行分析、计算,由管壁电流分析钢板表面不同角度的裂纹的回波损耗,阐述了微波裂纹信号产生机理,对不同深度的裂纹信号进行分析,随着裂纹深度的增加,微波回波损耗幅值的绝对值增加,微波反射系数的绝对值减小。结果表明,钢板表面裂纹的存在阻碍了管壁电流的传播,微波反射波产生回波损耗;钢板表面裂纹处的回波损耗与裂纹深度、角度有关,随着裂纹深度增加,回波损耗绝对值增加,微波反射系数增加;随着裂纹角度的增加,回波损耗绝对值增加,微波反射系数减小,利用不同角度微波检测探头,实现微波对进行钢板表面裂纹的全方位检测。 相似文献
7.
微波无损检测技术及应用 总被引:2,自引:0,他引:2
微波无损检测技术宾些年来发展迅速,应用范围越来越广,但在火力发电厂的应用为数不多。文中介绍了微波无损检测的原理、特点、方法。通过与超声波无损检测技术,核辐射无损检测技术的比,指出了微波无损检测技术的独到之处。介绍了微波无损检测技术的应用场合,并对其在火电厂中的应用情况举例加以说明。最后阐述了微波无损检测技术的现状及发展趋势。 相似文献
8.
微波制样技术及设备介绍 总被引:3,自引:0,他引:3
自 2 0世纪 70年代中期 ,Abu_Samra首先用微波加热湿法消解生物试样用于原子光谱测定某些金属元素 ,至今已有 2 0多年。现今 ,微波制样已发展成为一种甚为成熟的、完善的、系统的和极为先进的现代制样技术 ,不但可用之于原子光谱测定各种试样中痕量、微量和常量元素的样品消化 ,而且已进一步扩展到微波消解水样测定COD ,微波水解各种食品、饲料中的蛋白质以测定其中的各种氨基酸 ,以及微波加热选择性萃取各种试样中的某些组分供进一步测定用。另外还有微波加热测定水分以及具有快速升温的微波马弗炉等 ,但本文不予介绍。1 微波… 相似文献
9.
10.
11.
设计和研制一种能连续测量谷物湿度的微波检测系统.提出利用微波谐振器的干扰特性测量谷物的湿度,并设计专用于谷物湿度检测的中心开通孔的微波谐振器.当谷物颗粒通过微波谐振器的中孔时,其质量和湿度都令谐振器的谐振频率产生偏移和功率衰减,谷物的质量和湿度两者所引起的谐振频率偏移和微波功率衰减是相对独立的,在同一湿度下谷物的质量仅仅与微波功率的衰减量有关.因此在得到谐振频率的偏移量和微波功率的衰减量后,就可以计算谷物的湿度.在大量试验的基础上,对试验数据进行模糊聚类,从而对微波谐振器的频偏和功率衰减特性进行建模,据此设计并研制了谷物湿度的微波连续检测系统.试验调试表明:该检测系统适宜于谷物的连续湿度检测,检测精度达到92%以上. 相似文献
12.
设计与研制一种能在现代化中药制药生产线上在线连续测量中药丸料湿度与密度的微波检测系统。系统包括三个组成模块:微波信号源模块,微波谐振腔,数据处理模块。其中,微波谐振腔是专门设计用于中药丸料湿度与密度检测的中心开通孔的金属谐振腔,当中药丸料通过微波谐振腔的中孔时,丸料密度及湿度均令谐振腔的谐振频率产生偏移和功率衰减,数据处理模块据此计算中药丸料的湿度与密度。为提高检测精度,采用模糊聚类算法对实验数据进行分组,对金属谐振腔的频偏和功率衰减特性进行建模,并利用DSP设计并实现了中药丸料湿度与密度的在线检测。现场调试表明:该检测系统适宜于现代化中药制药生产线上的湿度连续在线测量,其检测精度达到93%以上。 相似文献
13.
《Measurement》2016
A rapid method of determining the moisture content of milk powder by microwave sensor is investigated. Calibration models of milk powder moisture content are established using the linear least squares method. The results predicted by the microwave technique are compared with that determined by standard weighing method. It shows that the maximal measurement deviation was 0.2%, based on the microwave method, which provides an effective tool for determining the moisture content of milk powder in the dairy processing industry. 相似文献
14.
微波消解技术在环境监测中的应用 总被引:1,自引:1,他引:0
将微波消解应用于分析化学领域,给分析实验室带来一场新的革命。微波能量传递方式比传统的加热方式来得快捷而清洁,使得微波消解立即得以广泛的应用。本文就环境监测领域使用的微波消解进行综述,内容包括在土壤、固废、底质中重金属和废水COD的测定等方面,目前微波消解技术已经广泛应用在各个环境监测的实验室中。 相似文献
15.
16.
本文介绍了利用AV1487微波信号源、MA2474D功率传感器、ML2437A功率计、构建微波器件衰减量检定系统,特别是针对不同的被检定对象和不同检定频率点的要求,通过建立检定点数据库方法,实现功能扩展进行了详细的描述,系统具有创新性,对从事自动检定程序设计者具有重要参考借鉴价值. 相似文献
17.
Hashem M. A. Al-Mattarneh Deepak K. Ghodgaonkar Wan Mahmood B. W. A. Majid 《Subsurface Sensing Technologies and Applications》2001,2(4):377-390
The existence of moisture in concrete is a major cause of damage to the concrete structure, so there is an increasing need for nondestructive detection and monitoring of moisture content in concrete. Microwave nondestructive testing (MNDT) techniques have advantages over other NDT methods (such as radiography, ultrasonic, and eddy current) regarding low cost, good penetration in nonmetallic materials, good resolution and requirement of only one face of material for testing. In this paper, microwave open-ended rectangular waveguide was used to measure the electromagnetic properties of Portland cement concrete (PCC) over a frequency range of 7.0 to 13.0 GHz. PCC specimens of six different water cement ratio (w/c) were prepared. PCC dielectric properties were evaluated at different moisture content ranges from saturated to oven dry. The results show reflection coefficients, dielectric constants and loss factors increase with increasing moisture content of PCC. At the same values of moisture content, the reflection coefficients, dielectric constants and loss factors of PCC increase with decreasing w/c ratio. The measured values of reflection coefficients, dielectric constants and loss factors can be used to determine the moisture content of PCC. 相似文献
18.
Development of microcontroller-based microwave system to measure solid content of hevea rubber latex
This paper describes the development of digital, portable, simple to operator, cheap and accurate microwave instrument to determine the total solid content (TSC) or moisture content (MC) of hevea rubber latex by using microcontroller, dual directional coupler, and open-ended coaxial probe. A low-cost stripline dual directional coupler and open-ended coaxial probe are simulated, designed and connected to microwave source and detectors. TSC parameter is obtained from the relationship between moisture content in the sample and the value of reflection coefficient from coaxial probe. Experimental results are presented and the empirical equation was implemented by the microcontroller for the calibration and followed the calculation setup. The whole system was tested by using diluted rubber latex with different TSCs at room temperature (25 °C) and the results of standard oven drying method and this study were found with the accuracy and reproducibility at the level of less than 1%. 相似文献