共查询到20条相似文献,搜索用时 156 毫秒
1.
<正> 振动磨在化学工业中用于一定产品细研磨。为了能判断振动磨的操作状态必须了解标准尺寸对研磨结果的影响。某些参数如磨体形状、尺寸和密度,磨体充填程度,研磨周期,研磨振动的振幅和频率的影响可以在间歇操作时测得。判断连续研磨过程以及使间歇操作试验成为工业规模也非得认识滞留时间分布以及可调节的被磨碎料的充填量。本文介绍了一系列的有关振动磨的关联式,但迄今为止人们只知道Gallyas和Gemesi的一个公式该关联式涉及的是Palla-20-u型磨机的滞留时间分布。 相似文献
2.
孟绍勇蔡健张百磊成杰乔俊华李成杜海红周萍吴延华 《化学推进剂与高分子材料》2023,(2):60-64
采用等离子体原子发射光谱法,测定在安全气囊气体发生剂的传统机械混合工艺与气动混合工艺中制得的特定物料的元素含量数值(响应变量,Y),以表征混合的均匀度。通过独立性检验、正态性检验(AD检验)、异常值检验、双方差检验(F检验)、双样本t检验选定了假设检验方法。试验表明,在显著性水平取0.05时,对于安全气囊气体发生剂混合工艺的混合均匀度,气动混合技术优于传统机械混合技术;采用试验设计(DOE)的方法建立并简化模型,通过统计软件响应优化器的功能对混合工序的特定物料元素含量进行测试,采用DOE试验分析的望目特性优化气动混合工艺参数。结果表明:最佳混合时间为11 min,进气压力为0.2 MPa,响应变量(Y)的95%置信区间为(22.174 3,22.803 7)。 相似文献
3.
行星振动磨内研磨体的运动分析 总被引:2,自引:1,他引:1
本文通过对行星振动磨内研磨体受力分析,根据牛顿第二定律及加速度合成定理推导出了研磨体基本运动方程式,根据基本运动方程式分析了行星振动磨的粉磨特性。 相似文献
4.
5.
超细粉煤灰、超细矿渣粉对水泥物理性能的影响研究 总被引:1,自引:0,他引:1
本文以球磨机对比研究振动磨对矿物超细粉的加工性能,并进一步探讨振动磨加工的超细粉对水泥性能的影响。研究结果表明:振动磨比球磨机具有更高的粉磨效率;振动磨加工的矿物超细粉使得标准稠度需水量减少,凝结时间缩短,强度提高。 相似文献
6.
7.
8.
9.
非叠氮化物气体发生剂的设计与研究 总被引:4,自引:0,他引:4
通过正交实验研究了新型非叠氮化物可燃剂PAK与混合氧化剂的燃烧性能 ,找到了适用于汽车安全气囊用的气体发生剂PAK - 2的组成。 60L压力舱实验结果表明 ,PAK - 2气体发生剂达到了国际同类产品的技术要求 相似文献
10.
11.
12.
13.
新型气体发生剂用非叠氮化物可燃剂研究进展 总被引:1,自引:0,他引:1
气体发生剂广泛应用于航空、航天领域,在汽车安全气囊、灭火装置、救生系统等也有重要用途。简介烟火气体发生剂的组成、特点,重点介绍了新型气体发生剂用非叠氮化物类可燃剂CL-20,AZODN,BTATZ,PAK,TZX,FOX-7和离子型化合物等的研究及应用现状。认为研制高能量、低感度、大产气量、环保、廉价的可燃剂是气体发生剂的发展趋势。 相似文献
14.
In the course of the development of an oxidizer‐based extruded composite propellant for use as gas generant, a simple model to describe and evaluate the actual porosity using simple methods was developed. It is briefly described and used to assess the influence of porosity on the burn rate of propellants produced. For the formulation studied the presence of microporosities does not seem to significantly influence the burn rate. On the other hand, volume fraction of porosities in extruded composition grains can exert a large influence and can increase considerably under thermal treatment with a resulting augmentation in burn rate. 相似文献
15.
BryceC. Tappan ArifN. Ali StevenF. Son ThomasB. Brill 《Propellants, Explosives, Pyrotechnics》2006,31(3):163-168
The high‐nitrogen compound triaminoguanidinium azotetrazolate (TAGzT) belongs to a class of C, H and N compounds that are free of both oxygen and metal, but retain energetic material properties as a result of their high heat of formation. Its decomposition thus lacks secondary oxidation reactions of carbon and hydrogen. The fact that TAGzT is over 80% nitrogen makes it potentially useful as a gas generant and energetic material with a low flame temperature to increase the impulse in gun or rocket propellants. The burning rate, laser ignition and flash pyrolysis (T‐jump/FTIR spectroscopy) characteristics were determined. It was found that TAGzT exhibits one of the fastest low‐pressure burning rates yet measured for an organic compound. Both the decomposition and ignition behavior of TAGzT are dominated by condensed phase reactions. T‐Jump/FTIR spectroscopy indicates that condensed phase reactions release about 65% of the energy, which helps to explain the high burning rate at low pressure. 相似文献
16.
17.
Philip W. Leonard David E. Chavez Philip F. Pagoria by X‐ray studies Damon L. Parrish 《Propellants, Explosives, Pyrotechnics》2011,36(3):233-239
The synthesis of (E)‐1,2‐bis(4‐(1H‐tetrazol‐5‐yl)‐1,2,5‐oxadiazol‐3‐yl)diazene (AzTF) and its high nitrogen salts is described. Compounds were tested for sensitivity to impact, spark, and friction and heats of formation were determined through bomb calorimetry. The calorimetry results coupled with density measurements by gas pychnometry were used to predict explosive output using the Cheetah thermochemical code. Of the four compounds tested AzTF itself has the most promise as an explosive due to TATB‐like performance and high thermal stability, while the triaminoguanidinium salt (TAG2AzTF) may find favor as a high‐nitrogen gas generant in regard to the low overall sensitivity and very high nitrogen content of the molecule. 相似文献
18.
天然气需求量的快速增加,为天然气管网的建设与开发提供了巨大的发展空间。而天然气管道中的污染物杂质会对天然气管线及仪表设备等安全运行产生不利影响。天然气滤芯是去除天然气污染物的主要元件,其性能好坏直接影响到管道与设备的稳定运行。研究了现有天然气滤芯性能试验方法,在分析滤芯实际工作条件与运行状况的情况下,提出将容尘效率测试加入到天然气滤芯性能测试中,并给出了新的天然气滤芯测试方法和流程。该方法更能体现天然气滤芯在实际工况下的过滤效率,对天然气滤芯测试和新型天然气滤芯的研发,有一定的指导意义。 相似文献
19.
20.
高压有毒流体,可燃流体的管道强度试验完毕后,依据规范的要求还必须进行泄露性试验。一般气体(空气)进行高压的管道气体泄漏试验,试验压力很高(一般为管道设计压力)非常危险。采用氦气作为试验介质,利用氦气检漏的高灵敏度在满足管系统高密封要求的同时,可大大降低泄漏试验压力,从而降低气压泄漏试验的危险性。 相似文献