溶胶自燃烧法制备纳米Mn0.5Zn0.5Fe2O4和BaZn2Fe16O27粉体

以柠檬酸与硝酸盐为原料通过溶胶自燃烧法制备出纳米Mn0.5Zn0.5Fe2O4和BaZn2Fe16O27粉体.采用XRD、TG-DSC、TEM、AA、BET及VSM等方法对产物进行了表征,结果表明,在1000℃灼烧后分别得到了单相尖晶石型Mn0.5Zn0.5Fe2O4纳米粒子和六角磁铅石型BaZn2Fe16O27纳米粒子,其晶型完整,分散性好.     

(1-x)CaTiO_3/xNi_(0.5)Zn_(0.5)Fe_2O_4复合材料的制备及其性能

采用固相反应法合成了(1-x)CaTiO3/xNi0.5Zn0.5Fe2O4(0≤x≤1.0)复合材料,并研究了复合材料的物相、微观结构、介电性能和磁性能。结果表明:样品中仅含有钙钛矿型CaTiO3和尖晶石型Ni0.5Zn0.5Fe2O4。1260℃保温3h,样品相对密度达到98.91%,颗粒尺寸约为2μm。样品介电常数随Ni0.5Zn0.5Fe2O4含量(x)增加而增大。当x=0.7、测试频率为103 Hz时,样品介电常数(εr)和介电损耗(tanδ)分别为2629.18和1.74。(1-x)CaTiO3/xNi0.5Zn0.5Fe2O4复合材料显示磁性。其中x=0.7时,样品饱和磁化强度(Ms)达到49.07A·m2/kg;这归因于Ni0.5Zn0.5Fe2O4具有优异的磁性能。     

Structural,vibrational and magnetic properties of Cu-substituted Mn0.5Zn0.5Fe2O4 nanoparticles

Journal of Materials Science: Materials in Electronics - Nanoparticles of quaternary Mn0.5?xCuxZn0.5Fe2O4 ferrite (x?=?0.05, 0.15, 0.25, and 0.35) have been investigated to...     

纳米Zn/Fe3O4水解制备纳米ZnFe2O4

用干法室温振动研磨方法制备纳米Zn粉,化学沉淀法制备纳米Fe3O4,纳米Zn和Fe3O4水解制备纳米ZnFe2O4。TEM和XRD检测显示经11h研磨的Zn粉粒度分布在10～20nm之间,纳米Fe3O4的粒度分布在20nm左右,水解产物纳米ZnFe2O4,形貌为方形片状,粒子尺度约为20nm。研究结果表明纳米Zn/Fe3O4摩尔比为1.5∶1,反应温度为300℃是最佳反应条件,可见用振动研磨方法制备的纳米Zn颗粒具有优良的性能,能使化学反应在较低温度下快速完成,且制备方法简单易行,便于批量化生产。     

Preparation and characterization of bamboo charcoal/Ni0.5Zn0.5Fe2O4 composite with core-shell structure

Bamboo charcoal particles coated with Ni_0.5Zn_0.5Fe₂O₄, forming a core-shell structure, were synthesized by hydrothermal method. A structural characterization by FTIR, XRD and TEM proved that nanometer-sized Ni_0.5Zn_0.5Fe₂O₄ in the composite was responsible for the ferromagnetic behavior of the composite. Effects of the bamboo charcoal and temperature on the magnetic properties of bamboo charcoal/Ni_0.5Zn_0.5Fe₂O₄ composite have been studied by ferromagnetic resonance (FMR) technique. The measuring temperature was varied from 220 to 460 K. A clear evolution from ferromagnetic resonance to paramagnetic resonance (EPR) was observed as a function of temperature, which is related with the passage through the Curie point (∼ 380 K).     

聚吡咯/Ni0.5Zn0.5Fe2O4复合物的合成与表征

采用超声场下原位聚合法制备聚吡咯/Ni0.5Zn0.5Fe2O4(PPy/NZFO)复合物。分别采用X射线衍射仪(XRD)、扫描电镜(SEM)、四探针测试仪和矢量网络分析仪对其结构、形貌、电性能和吸波性能进行研究。结果表明:APS/Py摩尔比为0.75的条件下可获得团聚程度较小、粒径大小比较均匀的聚吡咯颗粒。随着超声聚合反应时间的延长,聚吡咯颗粒的粒径呈现增大趋势。PPy/NZFO复合物的电导率与PPy含量成正比。复合物的吸波性能较纯PPy有很大提高,在5~20GHz频率范围内,NZFO含量为40%(质量分数)的复合物反射损耗都在-12dB以上,在18.15GHz处具有最大的反射损耗-16.76dB,-15dB有效带宽为1.65GHz。     

Nanocrystalline Cu0.5Zn0.5Fe2O4: Preparation and Kinetics of Thermal Decomposition of Precursor

Cu_0.5Zn_0.5Fe₂O₄ precursor was synthesized by solid-state reaction at low heat using CuSO₄?5H₂O, ZnSO₄?7H₂O, FeSO₄?7H₂O, and Na₂CO₃?10H₂O as raw materials. The spinel Cu_0.5Zn_0.5Fe₂O₄ was obtained via calcining precursor above 600 ^°C. The precursor and its calcined products were characterized by thermogravimetry and differential thermal analyses (TG/DTA), Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectrometer (EDS), and vibrating sample magnetometer (VSM). The result showed that highly crystallization Cu_0.5Zn_0.5Fe₂O₄ was obtained when the precursor was calcined at 600 ^°C for 2 h. Magnetic characterization indicated that calcined products above 600 ^°C behaved with strong magnetic properties. The kinetics of the thermal decomposition of the precursor was studied using the TG technique. Based on the KAS equation, the values of the activation energy for the thermal decomposition of the precursor were determined.     

Ni0.5Zn0.5Fe2O4粉末化学镀铜前后的电磁性能

本文用溶胶-凝胶自燃烧法制备了Ni0.5Zn0.5Fe2O4粉末颗粒,以甲醛为还原剂在Ni0.5Zn05Fe2O4颗粒表面进行了化学镀铜,制备了Cu/Ni0.5Zn0.5Fe2O4复合粉体.用扫描电镜(SEM)、能谱仪(EDS)和X射线衍射仪(XRD)对镀铜前的Ni0.5Zn0.5Fe2O4颗粒以及镀铜后的复合纳米颗粒进行了表征.对镀铜前的Ni0.5Zn0.5Fe2O4粉体和不同镀铜量的Cu/Ni0.5Zn0.5Fe2O4复合粉体进行了电磁性能的研究,结果表明镀铜后镍锌铁氧体的吸波性能明显提高,增重量为65%的Cu/Ni0.5Zn0.5Fe2O4复合粉体在频率为11GHz处反射率可达-12dB左右.     

低热固相反应法制备CoFe_2O_4、ZnFe_2O_4和Co_(0.5)Zn_(0.5)Fe_2O_4纳米粉体研究

采用低温固相反应法合成了CoFe2O4、ZnFe2O4和Co0.5Zn0.5Fe2O4纳米粉体。以NH4HCO3和金属盐为原料,生成了前驱体碱式碳酸盐,通过研究不同焙烧温度,并在最佳焙烧温度下得到了CoFe2O4、ZnFe2O4和Co0.5Zn0.5Fe2O4纳米粉体。经X射线衍射(XRD)、热分析(TG-DSC)、透射电子显微镜(TEM)、振动样品磁强计(VSM)等测试手段的分析,结果表明:低温固相反应法能够合成出单相的CoFe2O4、ZnFe2O4和Co0.5Zn0.5Fe2O4纳米粉体。     

A study on the thermochemotherapy effect of nanosized As2O3/MZF thermosensitive magnetoliposomes on experimental hepatoma in vitro and in vivo

In this paper, we describe the synthesis and characterization of a nanosized, thermosensitive magnetoliposome encapsulating magnetic nanoparticles (MZFs) and antitumor drugs (As(2)O(3)). The nanoliposomes were spherical and mostly single volume, with an average diameter of 128.2 nm. Differential scanning calorimetry (DSC) showed a liposome phase transition temperature of 42.71?°C. After that, we studied the liposomes' anti-hepatoma effect in vitro and in vivo. The antitumor effect of the nanoliposomes on human hepatoma cells, SMMC-7721, and changes in expression of apoptosis-related proteins were examined in vitro. The results show that As(2)O(3)/MZF thermosensitive magnetoliposomes combined with hyperthermia had a great impact on the Bax/Bcl-2 ratio, which increased to 1.914 and exhibited a rapid response to induce apoptosis of tumor cells. An in situ rabbit liver tumor model was established and used to evaluate the antitumor effect of combined hyperthermia and chemotherapy following transcatheter arterial embolization with As(2)O(3)/MZF thermosensitive magnetoliposomes. The results demonstrated a strong anti-hepatoma effect, with a tumor volume inhibition rate of up to 85.22%. Thus, As(2)O(3)/MZF thermosensitive magnetoliposomes may play a great role in the treatment of hepatocarcinoma.     

Ni_(0.5)Zn_(0.5)Fe_2O_4铁氧体的制备及其电磁损耗性能

以Zn(NO3)2.6H2O、Ni(NO3)2.6H2O和Fe(NO3)3.9H2O及柠檬酸为原料,采用溶胶-凝胶法制备前驱体,在1 200℃下煅烧3 h合成ZnFe2O4和Ni0.5Zn0.5Fe2O4铁氧体粉体。利用差热分析、X射线衍射、扫描电镜、透射电镜和红外光谱等测试手段对产物进行分析和表征。结果表明:ZnFe2O4和Ni0.5Zn0.5Fe2O4属于立方晶系尖晶石结构,结晶完整,晶粒大小在100 nm左右。在0.2~1.8 GHz的频率下对产品进行了电磁损耗性能测试,发现Ni0.5Zn0.5Fe2O4具有较好的电磁损耗特性。     

Magnetic and catalytic properties of Cu0.5Zn0.5Fe2O4 nanocrystallite powders

Cu0.5Zn0.5Fe2O4 nanocrystallite powders (average size 13 nm) were synthesized from Cu-Zn spent catalyst (fertilizers) industries and ferrous sulfate wastes formed during iron and steel making. Cu-Zn catalyst (22.4% Cu and 26.4% Zn) was chemically treated with sulfuric acid at temperature 80 degrees C for 1 hr for the complete dissolving of copper and zinc into sulfate solution, then the produced solution was mixed with stoichiometric ratio of ferrous sulfate and the mixture was chemically precipitated as hydroxides followed by hydrothermal processing. The parameters affecting the magnetic properties and crystallite size of the produced ferrites powder e.g., temperature, time, and pH were systemically studied. X-ray diffraction analysis was used in order to determine the average crystallite size and phase identifications of the produced powder. The magnetic properties were studied by vibrating sample magnetometry. The results showed that the average crystallite size of the powder decreased for the ferrites powder formed at 150 degrees C and then increased by increasing the temperature to 200 degrees C. Interestingly, the saturation magnetization (Bs), remanent magnetization (Br) and coercive force (Hc) were 25.03 emu/g, 0.71 emu/g, and 4.83 Oe, respectively at hydrothermal temperature 150 degrees C for 24 hr and changed to 16.38 emu/g, 0.3864 emu/g, and 5.2 Oe at 150 degrees C and 72 hr. The produced nanoferrite powders are used for studying the catalytic activity of CO conversion to CO2 at different temperatures, pH and times. The maximum conversion (82%) is obtained at temperature 150 degrees C for 24 hrs and pH 12.     

SnO2共混Fe2O3纳米氧化物的制备及其组织结构研究

用SnCl4和FeCl3为原料,采用化学共沉淀法制备掺杂Fe2O3的纳米SnO2,运用差热(DSC)、X射线粉末衍射(XRD)和透射显微镜(TEM)等方法对Fe2O3和SnO2混杂纳米粉末的物相和粒径进行了分析。结果发现：与纯SnO2相比,(1)掺杂Fe2O3可以降低前驱体Sn(OH)4分解制备SnO2纳米晶的焙烧温度,从纯Sn(OH)4的分解温度345．7℃下降到341．1℃;(2)掺杂Fe2O3可以有效阻碍SnO2纳米晶的团聚和长大,前驱体在650℃焙烧时,纯SnO2晶粒在25nm,而掺杂Fe2O3的SnO2晶粒可以保持在2nm左右;(3)掺杂Fe2O3使前驱体焙烧制备SnO2的温度范围更宽,对制备小于10nm的SnO2纳米晶,纯SnO2的焙烧温度范围在400～550℃,而掺杂Fe2O3的焙烧温度范围在400～650℃;(4)SnO2／Fe2O3复合粉末在650℃以下,其晶体结构保持溶剂SnO2的四方结构,部分Fe元素置换了Sn的位置;650℃以上,复合粉末从溶剂晶格中析出Fe2O3形成两相结构。     

Ce取代对纳米晶Ni0．5Zn0．5Fe2O4电磁性能的影响

以丙烯酰胺为聚合单体,N,N-亚甲基双丙烯酰胺为网络剂,采用聚丙烯酰胺凝胶法制备了尖晶石型Ni0.5Zn0.5CexFe2-xO4(x=0, 0.05)纳米晶.采用X射线,FT-IR,TEM和波导等方法对产物进行了表征.X射线结果表明,当煅烧温度为600℃时,形成纯相的尖晶石型Ni0.5Zn0.5CexFe2-xO4(x=0,0.05);由透射电镜照片可知Ni0.5Zn0.5Fe2O4平均粒径约为30nm;纳米晶体在8.2～12.4GHz的测试频率范围内具有介电损耗(ε")和磁损耗(μ"),Ni0.5Zn0.5Ceo.05Fe1.95O4的ε" 和μ"均高于Ni0.5Zn0.5Fe2O4,Ni0.5Zn0.5Ce0.05Fe1.95O4的ε"和μ"的最大值分别为0.93和0.15.     

热分解法制备Ni_(0.5)Zn_(0.5)Fe_2O_4纳米颗粒

采用热分解法制备Ni_(0.5)Zn_(0.5)Fe_2O_4纳米颗粒,研究表面活性剂用量、回流温度和回流时间对产物尺寸、形貌以及分散性的影响。通过X射线衍射仪(XRD)、透射电子显微镜(TEM)和振动样品磁强计(VSM)对样品的结构、形貌与磁性能进行了表征。结果表明:增加表面活性剂的用量,产物的粒径减小,分散性明显提高,而提高回流温度和延长回流时间则会使产物粒径增加,但粒径分布也会变宽。在三辛基氧化膦(TOPO)用量为0.6mmol,260℃回流1h条件下制备产物的饱和磁化强度为49.38A·m2/kg,矫顽力为7143.20A/m,剩余磁化强度为5.76A·m2/kg,表现为亚铁磁性。     

Ni0.5Zn0.5Nd0.02Fe1.98O4-聚苯胺纳米复合材料的制备及电磁性能（英文）

在Ni0.5Zn0.5Nd0.02Fe1.98O4纳米粒子表面原位聚合苯胺制备了Ni0.5Zn0.5Nd0.02Fe1.98O4-聚苯胺(PANI)纳米复合材料.铁氧体含量为0%、15%和30%样品的结构、形貌和电磁性能分别采用X射线衍射仪(XRD)、透射电子显微镜(TEM)和HB8510B网络分析仪进行了研究.结果表明,聚苯胺包覆层对Ni0.5Zn0.5Nd0.02Fe1.98O4的结晶度有一定影响.在X波段(8.2～12.4 GHz),复介电常数的实部随铁氧体含量的增加而减小,虚部随铁氧体含量的增加而增大.复磁导率的实部和虚部都随铁氧体含量的增加而增大.     

Annealing Induced Enhancement in Magnetic Properties of Co0.5Zn0.5Fe2O4 Nanoparticles

In this paper, cobalt zinc ferrite (Co_0.5Zn_0.5Fe₂O₄) nanoparticles (NPs) have been prepared using chemical co-precipitation method. In order to investigate the annealing induced effects on their various physical properties, the prepared samples have been annealed at 500 °C, 650 °C and 1000 °C and then compared with as-prepared sample. X-ray diffraction (XRD) patterns of as-prepared and annealed samples at various temperatures exhibit single phase spinel structure. Enhancement in crystallinity and crystallite size is observed with the increase in annealing temperature. The annealing has also greatly influence the morphology and grain size of prepared NPs. The Co_0.5Zn_0.5Fe₂O₄ NPs have shown remarkable enhancement in magnetic moment with increase in annealing temperature. The bandgap energies of Co_0.5Zn_0.5Fe₂O₄ NPs have been measured via UV Spectrometer and observed to decrease with annealing temperature. FTIR spectra of the samples reveal the presence of both high frequency and low-frequency bands due to tetrahedral and octahedral sites, which corroborate well with the XRD results. The observed characteristics of cobalt zinc ferrite NPs as a function of annealing temperature are the rising contender for many data storage and nanodevice applications. Finally, the genotoxicity of prepared nanoferrites has been checked via comet assay.