Study on luminescent properties of Eu3+ doped Gd2WO6, Gd2W2O9 and Gd2(WO4)3 nanophosphors prepared by co-precipitation

Eu3+ doped Gd2WO6, Gd2W2O9 and Gd2(WO4)3 nanophosphors with different concentrations have been prepared by co-precipitation. XRD (X-ray diffraction) and SEM (scanning electron microscopy) were used to investigate the structure and morphology. The emission spectra, excitation spectra and fluorescence decay curves were measured, and partial J-O parameters and quantum efficiencies of Eu3+ 5D0 energy level were calculated. Furthermore, concentration quenching curves of Eu3+ in different hosts were drawn. The photoluminescent properties of Eu3+ doped Gd2WO6, Gd2W2O9 and Gd2(WO4)3 nanophosphors have been studied. The results indicate that Eu3+ 5D0-7F2 red luminescence can be effectively excited by 395 nm and 465 nm in Gd2WO6 and Gd2W2O9 hosts, similar to the familiar Gd2(WO4)3:Eu. Especially Gd2W2O9:Eu has strong red emission and high quenching concentration, so it has potential applications for trichromatic white LED as red fluorescent materials.     

Ca10K（PO4）7:Eu3+红色荧光粉的制备及其发光性质

高温固相法合成了Ca10-xK(PO4)7:xEu3+(x=0.02,0.04,0.06,0.08,0.10,0.12,0.14和0.16)的红色荧光粉。X射线衍射表明,样品具有标准的Ca10K(PO4)7六角晶体结构,且无第二相存在。在393nm的波长激发下,样品获得由Eu3+的4f-4f跃迁产生红光发射,其中以613nm附近的5 D0→7F2电偶极跃迁发射为最强。通过调节Eu3+的掺杂浓度,获得了色坐标与商业化Y2O2S:Eu3+荧光粉十分接近的接近纯色的红色荧光粉。Ca10K(PO4)7:Eu3+是一种可望应用于紫外激发的白光LED的红色荧光粉。     

Preparation and luminescence properties of LaMgAl11O19:Eu3+ phosphor powder

LaMgAl11O19, is a kind of rare earth aluminate with the hexagonal structure, which has been used as a host material for the luminescence of various rare earth and magnet-like ions. LaMgAl11O19:Eu3+ phosphors have been prepared through the one-pot method. X-ray diffraction (XRD), thermogravimetric and differential thermal analysis (TG-DTA) and photoluminescence spectra were used to characterize the resulting phosphors. The results of XRD indicated that the phosphors crystallized completely at 1,400 degrees C. In LaMgAl11O19:Eu3+ phosphors, the Eu3+ shows its characteristic red emission at 615 nm (5D0-7F2) upon excitation into 404 nm, with an optimum doping concentration of 15 mol% of La3+ in the host lattices.     

Fabrication of nano-sized emitting phosphors for photoluminescence films via hydro-thermal synthesis

Nano-sized red and blue emitting phosphors for a photoluminescence film were fabricated via hydrothermal synthesis through the sol-gel process. The nano-sized phosphors had a spherical shape such as the 60-110 nm Y2O2S:Eu3+ phosphor and the 45-90 nm of Y2SiO5:Ce phosphor. Firing at 1000 degrees C for 2 hours resulted in an increase in their size to 90-190 nm for the Y2O2S:Eu3+ phosphor and 70-160 nm for the Y2SiO5:Ce phosphor. Heat treatment of the gel powders of the emitting phosphors above 730 degrees C was recommended because of their crystallization. The maximum excitation and emission intensities of the red and blue phosphors with Y2O2S:Eu3+ and Y2SiO5:Ce were at the wavelengths of 308 nm and 617 nm, and 254 nm and 464 nm, respectively. The photoluminescence of the films increased as increasing the content of the red and blue phosphor powder mixture in the plastic films. The 100 microm-thick PVB film with the nano-sized phosphors showed the maximum photoluminescence of 537 x 1000 counts/sec.     

Fabrication of SiO2@ZrO2@Y2O3:Eu3+ core-multi-shell structured phosphor

ZrO2 interface was designed to block the reaction between SiO2 and Y2O3 in SiO2@Y2O3:Eu coreshell structure phosphor. SiO2@ZrO2@Y2O3:Eu core-multi-shell phosphors were successfully synthesized by combing an LBL method with a Sol-gel process. Based on electron microscopy, X-ray diffraction, and spectroscopy experiments, compelling evidence for the formation of the Y2O3:Eu outer shell on ZrO2 were presented. The presence of ZrO2 layer on SiO2 core can block the reaction of SiO2 core and Y2O3 shell effectively. By this kind of structure, the reaction temperature of the SiO2 core and Y2O3 shell in the SiO2@Y2O3:Eu core-shell structure phosphor can be increased about 200-300 degrees C and the luminescent intensity of this structure phosphor can be improved obviously. Under the excitation of ultraviolet (254 nm), the Eu3+ ion mainly shows its characteristic red (611 nm, 5D0-7F2) emissions in the core-multi-shell particles from Y2O3:Eu3+ shells. The emission intensity of Eu3+ ions can be tuned by the annealing temperatures, the number of coating times, and the thickness of ZrO2 interface, respectively.     

Hydrothermal synthesis and size-enhanced chromaticity of Sr2ZnSi2O7:Eu3+ nanoparticles

Red phosphor Sr2ZnSi2O7:Eu3+ nanoparticles with an average diameter of 20 nm were successfully synthesized via a low-temperature hydrothermal route in order to understand the underlying relationship between size and luminescent properties. The nanometer-sized particles result in a distinct improvement in chromaticity and a high quenching concentration. According to emission spectra, the relative intensity of the 5D0 --> 7F2 to 5D0 --> 7F1 transitions in nanometer-sized phosphors is higher than that of the corresponding bulk material. The better chromaticity results from the more distorted lattices and relatively lower crystal symmetry around the Eu3+ ions, which is ascribed to the large surface area due to the nanometer size of the phosphor. Moreover, the nanometer-sized Sr2ZnSi2O7:Eu3+ red phosphor exhibits a shorter fluorescent lifetime and a blue-shift in excitation spectra compared to that of its bulk counterpart. These results indicate that size-induced enhancement of luminescent properties is an efficient way to obtain red phosphors with better chromaticity.     

Sol-gel fabrication and photoluminescence properties of SiO2 @ Gd2O3:Eu3+ core-shell particles

A uniform nanolayer of europium-doped Gd2O3 was coated on the surface of preformed submicron silica spheres by a Pechini sol-gel process. The resulted SiO2 @ Gd2O3:Eu3+ core-shell structured phosphors were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), photoluminescence (PL) spectra as well as kinetic decays. The XRD results show that the Gd2O3:Eu3+ layers start to crystallize on the SiO2 spheres after annealing at 400 degrees C and the crystallinity increases with raising the annealing temperature. The core-shell phosphors possess perfect spherical shape with narrow size distribution (average size: 640 nm) and non-agglomeration. The thickness of the Gd2O3:Eu3+ shells on the SiO2 cores can be adjusted by changing the deposition cycles (70 nm for three deposition cycles). Under short UV excitation, the obtained SiO2@Gd2O3:Eu3+ particles show a strong red emission with 5D0-7F2 (610 nm) of Eu3+ as the most prominent group. The PL intensity of Eu3+ increases with increasing the annealing temperature and the number of coating cycles.     

Synthesis and luminescence properties behavior of Eu(3+)-doped nanocrystalline and bulk GdVO4 phosphors by high-energy ball milling and solid state reaction

Europium-doped nanosized-GdVO4:Eu3+ powders and bulk GdVO4:Eu3+ powders were synthesized using a planetary ball mill and conventional solid state reaction method, respectively. The effects of the grain size on the crystallinity, morphology, structure and luminescence spectra were investigated by X-ray diffraction, field emission-scanning electron microscopy and photoluminescence spectroscopy (PL). The room temperature PL spectra of the GdVO4:Eu3+ nanophosphors showed four emission bands at 611, 615, 619 and 595 nm. The bands at 611, 615 and 619 nm were assigned to the 5D0 --> 7F2 transition of the EU3+ ion when excited with 312 nm light.     

Synthesis and luminescence properties of Sr2SiO4: Eu3+, Dy3+ phosphors by the sol-gel method

The Sr2SiO4:Eu3+, Dy3+ phosphors for white light emitting diodes (LEDs) were synthesized by the sol-gel method. The microstructure and luminescent properties of the obtained Sr2SiO4:Eu3+, Dy3+ particles were well characterized. The results demonstrate that the Sr2SiO4:Eu3+, Dy3+ particles, which have spherical morphology, emitted an intensive white light emission under excitation at 386 nm. The phosphors show three emission peaks: the blue emission at 486 nm corresponding to the 4F(9/2)-6H(15/2) transition of Dy3+, the yellow emission at 575 nm corresponding to the 4F(9/2)-6H(13/2) transition of Dy3+, and the red emission at 615 nm corresponding to the 5D0-7F2 transition of Eu3+. At the same time, the effect of Eu3+ concentration on the emission intensities of Sr2SiO4:Eu3+, Dy3+ was investigated in detail. The phosphors used for white LEDs were obtained by combining near ultraviolet (NUV) light (386 nm) with Sr2SiO4:0.04Dy3+, 0.01Eu3+ phosphors with the characteristic of Commission Internationale de l'Eclairage (CIE) chromaticity coordinate (x, y) of (0.33, 0.34), and color temperature Tc of 5,603 K. In addition, the effect of the charge compensators (Li+, Na+, and K+ ions) on the photoluminescence (PL) emission intensities were studied.     

Nanostructured CaWO4, CaWO4:Eu3+ and CaWO4:Tb3+ particles: sonochemical synthesis and luminescent properties

Nanostructured CaWO4, CaWO4:Eu3+, and CaWO4:Tb3+ phosphor particles were synthesized via a facile sonochemical route. X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, photoluminescence, low voltage cathodoluminescence spectra, and photoluminescence lifetimes were used to characterize the as-obtained samples. The X-ray diffraction results indicate that the samples are well crystallized with the scheelite structure of CaWO4. The transmission electron microscopy and field emission scanning electron microscopy images illustrate that the powders consist of spherical particles with sizes from 120 to 160 nm, which are the aggregates of even smaller nanoparticles ranging from 10 to 20 nm. Under UV light or electron beam excitation, the CaWO4 powder exhibited a blue emission band with a maximum at 430 nm originating from the WO4/2- groups, while the CaWO4:Eu3+ powder showed red emission dominated by 613 nm ascribed to the 5D0 --> 7F2 of Eu3+, and the CaWO4:Tb3+ powders showed emission at 544 nm, ascribed to the 5D4 --> 7F5 transition of Tb3+. The PL excitation and emission spectra suggest that the energy is transferred from WO4/2- to Eu3+ CaWO4:Eu3+ and to Tb3+ in CaWO4:Tb3+. Moreover, the energy transfer from WO4/2- to Tb3+ in CaWO4:Tb3+ is more efficient than that from WO4/2- to EU3+ in CaWO4:Eu3+. This novel and efficient pathway could open new opportunities for further investigating the novel properties of tungstate materials.     

Eu3+掺杂的硼酸锶系列荧光体的合成及其发光性能

采用溶胶-凝胶法和高温固相反应法合成了Eu^3 掺杂的SrB4O7、SrB2O4、Sr2B2O5、Sr3B2O6荧光体．荧光光谱测试结果表明在不同基质中Eu^3 的荧光发射是有区别的，Sr2B2O5：Eu^3 、Sr3B2O7：Eu^3 发射峰在610nm左右的红光区，SrB2O4：Eu^3 的发射峰在593nm的橙色区，而SrB4O7：Eu^3 则表现出了Eu^2 离子的特征峰，产生这种区别主要是由Eu^3 所处的配位环境不同造成的．荧光体SrB4O7：Eu^3 、SrB2O4：Eu^3 、Sr2B2O5：Eu^3 、Sr3B2O6：Eu^3 的最佳掺杂浓度为2％左右．     

Eu2+、Dy3+、Li+共掺杂CaSi2O2N2荧光粉的发光性能

采用高温固相反应法制备了一系列白光LED用CaSi2O2N2:0.05Eu2+,xDy3+,xLi+(0≤x≤0.03)荧光粉.利用X射线衍射仪对样品的物相结构进行了分析,结果表明:Dy3+和Li+离子的掺入没有改变CaSi2O2N2:Eu2+荧光粉的主晶相.利用荧光光谱仪对样品的发光性能进行了测试,发现所有样品的激发光谱均覆盖了从近紫外到蓝光的较宽范围,400 nm激发下得到的发射光谱为宽波段的单峰,峰值位于545 nm左右,是Eu2+离子5d-4f电子跃迁引起的.Dy3+离子掺杂可以提高CaSi2O2N2:Eu2+荧光粉的发光强度,Dy3+与Li+共掺杂可进一步提高荧光粉的发光强度,当Dy3+和Li+的掺杂量为1mol%时,荧光粉的发光强度达到最大值,是单掺杂Eu2+的荧光粉发光强度的157%.     

Spherical SiO2 @ GdPO4: Eu3+ core-shell phosphors: sol-gel synthesis and characterization

Nanocrystalline GdPO4 : Eu3+ phosphor layers were coated on non-aggregated, monodisperse and spherical SiO2 particles by Pechini sol-gel method, resulting in the formation of core-shell structured SiO2 @ GdPO4 : Eu3+ particles. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), photoluminescence (PL), low-voltage cathodoluminescence (CL), time-resolved PL spectra and lifetimes were used to characterize the core-shell structured materials. Both XRD and FT-IR results indicate that GdPO4 layers have been successfully coated on the SiO2 particles, which can be further verified by the images of FESEM and TEM. Under UV light excitation, the SiO2 @ GdPO4 : Eu3+ phosphors show orange-red luminescence with Eu3+ 5D0-7F1 (593 nm) as the most prominent group. The PL excitation and emission spectra suggest that an energy transfer occurs from Gd3+ to Eu3+ in SiO2 @ GdPO4 : Eu3+ phosphors. The obtained core-shell phosphors have potential applications in FED and PDP devices.     

Ce3+共掺杂对Y2O3:Eu3+荧光粉的发光性能和颗粒形貌的影响

采用化学反应与高温固相反应相结合的方法制备了Ce3和Eu3+共掺杂Y2O3荧光粉,利用X射线衍射和扫描电镜分析,发现Ce3+离子共掺杂对Y2O3:Eu3+荧光粉的颗粒形貌有显著的影响,随着Ce3+离子浓度的改变,形貌可从球型转变为管状.荧光光谱分析表明,所制备的共掺杂荧光粉主要发射位于614纳米的红光峰和位于587纳米...     

Fabrication of novel luminor Y(2)O(3):Eu(3+)@SiO(2)@YVO(4):Eu(3+) with core/shell heteronanostructure

A novel polychromic phosphor with core-shell heteronanostructure has been prepared to improve the chromatic index of phosphors. As for the first example, Y(2)O(3):Eu(3+)@SiO(2)@YVO(4):Eu(3+), its synthetic route, structure and optical properties are presented in this paper. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), high resolution transmission electron microscopy (HR-TEM), energy-dispersive x-ray spectra (EDS) and photoluminescence (PL) were all employed to characterize the composite core-shell phosphors. The XRD, FE-SEM and HR-TEM results indicate that the SiO(2) and YVO(4):Eu(3+) layers have been successfully coated on Y(2)O(3):Eu(3+) nanoparticles and SiO(2) layer, respectively: these layers were further verified by the EDS. The PL showed that the red-emitting phosphor Y(2)O(3):Eu(3+)@SiO(2)@YVO(4):Eu(3+) possessed the independent luminescent properties of both the core Y(2)O(3):Eu(3+) and the shell YVO(4):Eu(3+). The emissions were dominated by [Formula: see text] or [Formula: see text] transitions of Eu(3+) when excited with different wavelengths. Since this broad-band response to excitation in the range of 225-340?nm gave more red/dark red emissions found at 612, 616 and 620?nm, the novel phosphor Y(2)O(3):Eu(3+)@SiO(2)@YVO(4):Eu(3+) could have potential biological labeling applications with wide flexibility.     

纳米Y2O2S∶Tb X射线发光粉的合成及发光性质

以EDTA为螯合剂、尿素为沉淀剂,采用络合沉淀法制备了Y2O2S:Tb纳米X射线发光粉.通过X射线衍射(XRD)、光致发光(PL)光谱和X射线激发发光(XEL)光谱对纳米发光粉进行了表征,并研究了纳米晶的发光性能及Tb3+离子的能量传递过程.研究表明:所制备样品显示了单一的六角结构,其一次粒径约为32nm.在254nm紫外光和X射线激发下,Y2O2S:Tb X射线发光粉都显示了Tb3+离子的特征发射峰,分别起源于5D3和5D4能级到基态能级的跃迁.     

Y2O3:Eu3+ core-in-multi-hollow microspheres: facile synthesis and luminescence properties

Y2O3:Eu3+ core-in-multi-hollow microspheres were synthesized via a facile hydrothermal method in the presence of glucose followed by a subsequent heat-treatment process. X-ray diffraction (XRD) pattern shows that the as-obtained hollow spheres are cubic phase of Y2O3. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) images indicate that the samples are three layer hollow spheres with a diameter of 2-4 microm and the outermost wall thickness of 100 nm, the size of the inner core is about 300-400 nm, and the sub-outer wall thickness is about 100 nm. X-ray energy dispersive spectrum (EDS) shows that the samples are composed of Y, Eu and O. Photoluminescence spectra show that the hollow spheres have a strong characteristic red emission corresponding to the 5D0 - 7F2 transition of Eu3+ ions under ultraviolet excitation. This method can be used to synthesize other rare earth oxide hollow luminescent materials.     

Luminescence properties of nano-crystalline Ba3MgSi2O8:Eu2+, Mn2+ phosphors

Ba3MgSi2O8:Eu2+, Mn2+ phosphors were synthesized by the sol-gel method and high temperature solid-state reaction method, respectively. XRD (X-ray diffraction), FT-IR (Fourier transform infrared spectroscopy), PL (photoluminescence spectra), and PLE (photoluminescence excitation spectra) were measured to characterize the samples. Emission and excitation spectra of our Ba3MgSi2O8:Eu2+, Mn2+ phosphors monitored at 441, 515, and 614 nm are depicted in the paper. The emission intensities of 441 and 515 nm emission bands increase with increasing Eu2+ concentration, while the peak intensity of the 614 nm band increases with increasing Mn2+ concentration. We conclude that the 515 nm emission band is attributed to the 4f(6)5d transition of Eu2+ ions substituted by Ba2+ sites in Ba2SiO4. The 441 nm emission band originates from Eu2+ ions, while the 614 nm emission band originates from Mn2+ ions of Ba3MgSi2O8:Eu2+, Mn2+. Nano-crystalline Ba3MgSi2O8:Eu2+, Mn2+ phosphors prepared by the sol-gel method show higher color rendering and better color temperature in comparison with the samples prepared by high temperature solid-state reaction method.     

稀土掺杂双钙钛矿结构红色荧光粉的制备及其发光性能

采用高温固相反应法制备了Sr_(2-x)BaxMgMoO_6∶Eu~(3+)(x=0~1)双钙钛矿结构红色荧光粉。探讨了预处理及煅烧制度、Ba取代量对Sr_(2-x)BaxMgMoO_6∶Eu~(3+)荧光粉的相结构和发光性能的影响。Sr_2Mg_(0.94)Eu_(0.06)MoO_6荧光粉最佳制备工艺为:在700℃下预处理1h再升温至1050℃预处理1h并随炉降温后研细,再在1300℃煅烧4h,所得样品主相为双钙钛矿结构的Sr2MgMoO6四方相。其最强发光峰位于617nm附近,对应于Eu3+的5D0→7F2电偶极跃迁。随着Ba2+对Sr2+的取代量的增加晶体对称性提高,晶体结构由四方相变为立方相,样品的激发峰强度显著提高。由于晶体对称性的提高,抑制了荧光粉在617nm处5D0→7F2红光发射,其发光由电偶极跃迁占主导转变为磁偶极跃迁占主导。     

Photoluminescence properties of NaGd(MoO4)2:Eu nanophosphors prepared by sol-gel method

NaGd(MoO₄)₂:Eu³⁺ (hereafter NGM:Eu) phosphors have been prepared by sol-gel method. The properties of the resulting phosphors are characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), photoluminescence (PL) spectra and decay curve. The excitation spectra of NGM:Eu phosphors are mainly attributed to O → Mo charge-transfer (CT) band at about 282 nm and some sharp lines of Eu³⁺ f-f transitions in near-UV and visible regions with two strong peaks at 395 and 465 nm, respectively. Under the 395 and 465 nm excitation, intense red emission peaked at 616 nm corresponding to ⁵D₀ → ⁷F₂ transition of Eu³⁺ are observed for 35 at.% NGM:Eu phosphors as the optimal doping concentration. The luminescence properties suggest that NGM:Eu phosphor may be regarded as a potential red phosphor candidate for near-UV and blue light-emitting diodes (LEDs).