γ ? α2 Phase transformation in fractured high temperature stress rupture Ti-48Al-2Nb(at.%)

The ₂ phase transformation in fractured high temperature stress rupture Ti-48Al-2Nb(at.%) alloy has been studied by analytical electron microscopy. ₂ and phases were found at grain boundaries. ₂ layers that suspended in layers and interfacial ledge higher than 2d ₍₁₁₁₎ at /₂ interfaces were observed in the lamellar grains. These facts indicated that ₂ phase transformation and dynamic recrystallization have occurred during high temperature stress rupture deformation. It can be concluded that deformation induced ₂ phase transformation and dynamic recrystallization resulted in the presence of particles at grain boundaries. A structural and compositional transition area between deformation-induced ₂(or ) and its adjacently original (or ₂) phases was found by HREM and EDS and is suggested as a way to transform between and ₂ phase during high temperature stress rupture deformation. The transition area was formed by slide of partial dislocations on close-packed planes and diffusion of atoms.     

Radiation of internal waves during vertical motion of a body through a nonuniform liquid

Energy losses to radiation of internal waves during the vertical motion of a point dipole in two-dimensional and three-dimensional cases are computed.Notation _o(z), p_o(z) density and pressure of the ground state - z vertical coordinate - v, p, perturbed velocity, pressure, and density - H(d 1n _o/dz)^–1 characteristic length scale for stratification - N=(gH^–1–g²c _o ^–2 )^1/2 Weisel-Brent frequency - g acceleration of gravity - c_o speed of sound - vertical component of the perturbed velocity - V vector operator - k wave vector - frequency - d vector surface element - W magnitude of the energy losses - (t), (r) (x)(y)(z) Dirac functions - v_o velocity of motion of the source of perturbations - d dipole moment of the doublet - _o,l length dimension parameters - _o intensity of the source Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 4, pp. 619–623, October, 1980.     

On internal stress and activation volume in polymers

The two-site model is developed for the analysis of stress relaxation data. It is shown that the product of d In (– )/d and (- _i) is constant where is the applied stress, _i is the (deformation-induced) internal stress and = d/dt. The quantity d In ( )/d is often presented in the literature as the (experimental) activation volume, and there are many examples in which the above relationship with (- _i) holds true. This is in apparent contradiction to the arguments that lead to the association of the quantity d In (– )/d with the activation volume, since these normally start with the premise that the activation volume is independent of stress. In the modified theory presented here the source of this anomaly is apparent. Similar anomalies arise in the estimation of activation volume from creep or constant strain rate tests and these are also examined from the standpoint of the site model theory. In the derivation presented here full account is taken of the site population distribution and this is the major difference compared to most other analyses. The predicted behaviour is identical to that obtained with the standard linear solid. Consideration is also given to the orientation-dependence of stress-aided activation.     

Breakup of an anomolously viscous liquid film in a centrifugal force field

An equation is obtained for the breakup radius with consideration of tipping moments and Laplacian pressure forces acting on the liquid ridge at the critical point.Notation K, n rhenological constants - density - surface tension - r current cup radius - R maximum cup radius - r_c critical radius for film breakup - ¯r=¯r=r/R dimensionless current radius - ¯r_c=r_c/R dimensionless critical radius - ₀, _c actual and critical film thicknesses - current thickness - R_r ridge radius - h₀ ridge height - h current ridge height - ₀ limiting wetting angle - current angle of tangent to ridge surface - angle between axis of rotation and tangent to cup surface - angular velocity of rotation - q volume liquid flow rate - v₁ and v meridional and tangential velocities - =4vv _lm/r,=4v_m/r dimensionless velocities - M moments of surface and centrifugal forces - M_v moment from velocity head - p_r pressure within ridge - P_vm pressure from velocity head - p_m, p_pm pressures from centrifugal force components tangent and normal to cup surface - deviation range of breakup radius from calculated value - ¯r_max, ¯r_min limiting deviations of breakup radius - _c angle of tangent to curve _c/°₀=f(¯r) at critical point - t random oscillation of ratio _c/_c Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 1, pp. 51–56, July, 1980.     

Nonlinear asymptotic theory of hypersonic flow past a circular cone

Summary The hypersonic small-disturbance theory is reexamined in this study. A systematic and rigorous approach is proposed to obtain the nonlinear asymptotic equation from the Taylor-Maccoll equation for hypersonic flow past a circular cone. Using this approach, consideration is made of a general asymptotic expansion of the unified supersonic-hypersonic similarity parameter together with the stretched coordinate. Moreover, the successive approximate solutions of the nonlinear hypersonic smalldisturbance equation are solved by iteration. Both of these approximations provide a closed-form solution, which is suitable for the analysis of various related flow problems. Besides the velocity components, the shock location and other thermodynamic properties are presented. Comparisons are also made of the zeroth-order with first-order approximations for shock location and pressure coefficient on the cone surface, respectively. The latter (including the nonlinear effects) demonstrates better correlation with exact solution than the zeroth-order approximation. This approach offers further insight into the fundamental features of hypersonic small-disturbance theory.Notation a speed of sound - H unified supersonic-hypersonic similarity parameter, - K hypersonic similarity parameter, M - M freestream Mach number - P pressure - T temperature - S entropy - u, v radial, polar velocities - V freestream velocity - shock angle - cone angle - density - density ratio, /() - ratio of specific heats - polar angle - stretched polar angle, / - (), (), () gage functions     

Complex microstructural changes in as-cast eutectoid Zn-Al alloy

Phase transformations and microstructural changes of an as-cast eutectoid Zn-Al alloy (ZnAl₂₂Cu₂) were investigated during isothermal holding. The typical dendritic structures consisted of _s phase as a core with the edge of decomposed _s phase and decomposed _s in the interdendritic regions. A series of complex phase transformations was observed. Both decompositions of _s and _s were determined at an early stage of ageing and a four-phase transformation, _f+T+, was observed at the boundaries of _f phase and the phase, instead of clearly observed at the boundaries of phase, in a solution-treated Zn-Al alloy during prolonged ageing.     

Temperature field in a plate containing a system of heat sources

The temperature field is determined in a circular plate with a system of thin extrinsic heat sources.Notation T temperature in the plate with the inclusions - r polar radius - polar angle - time - (r,) coefficient of thermal conductivity - (r,) heat transfer coefficient - C(r,) volume heat capacity - W(r,, ) specific intensity of the heat sources - half thickness of the plate - (x) Dirac's delta function - ¯T finite Fourier cosine transform of the temperature - p parameter for this transformation - T Laplace transform of the temperature - s its parameter - Iv(x) Bessel function with imaginary argument of order - K _v (x) the MacDonald function of order - and dimensionless temperature - Po Pomerantz number - Bi Biot number - Fo Fourier's number - dimensionless polar radius - b₁ ^* dimensionless radius of the circle on which the inclusions are placed - R^* dimensionless radius of the plate Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 40, No. 3, pp. 495–502, March, 1981.     

Simulation of the Process of Water Freezing in a Round Pipe

The problem of freezing of pure water in a round pipe is treated with due regard for convection under asymmetric thermal boundary conditions in the absence of motion along the pipe. The problem is solved numerically using the control volume approach, SIMPLER algorithm, and the enthalpy method. Results are obtained for three Grashof (Gr) and six Biot (Bi) numbers: Gr = 1.55 × 10⁶, Bi = 0.305 (0 < ), Bi = 0.044 ( < 2); Gr = 1.24 × 10⁷, Bi = 0.610 (0 < ), Bi = 0.087 ( < 2); Gr = 9.89 × 10⁷, Bi = 1.220 (0 < ), Bi = 0.174 ( < 2). The correctness of calculation of the problem disregarding free-convection flows is analyzed.     

Theory of periodically driven,current-carrying,superconducting filaments. I. Spatially homogeneous states

Starting from the nonequilibrium theory of dirty superconductors in the Ginzburg-Landau regime, spatially homogeneous states with an applied currentI=I ₀+I ₁ cos (t) are considered. Expressions for the linear response (I₁ small) valid up to high frequencies (k _BT_c) are derived and evaluated analytically for the experimentally important case of smallI ₀ and ₀(T). Then the nonlinear response is treated for frequencies with _E1. Interesting new behavior is found for frequencies ₀ 1, where ₀ is essentially the GL relaxation time.     

Numerical simulation of an explosive plasma generator in the gasdynamic approximation

A two-dimensional gasdynamic model of a plasma generator is proposed. A numerical solution of the problem is obtained, and peculiarities of the gasdynamic flow are considered. Results are compared with experiment.Notation T temperature - p pressure - N number of gas particles per unit volume - w gas mass velocity vector with components w_z=u and w_r=v - z axial coordinate - r radial coordinate - t time - E total specific energy of gas - specific internal energy - density - V plate velocity - E_in initial plate energy - M plate mass - S plate area - p pressure difference between left and right sides of plate - t, z, r time and space steps - k<1 Courant number - c velocity of sound in the gas Indices 0 initial value - * characteristic dimensional quantities - i, j grid cell indices along z and r - n number of time step - () symbol denoting intermediate values of gasdynamic variables in a time layer Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 37, No. 5, pp. 859–867, November, 1979.     

Oxidation of an Al2O3-γAlON ceramic composite

The oxidation of dispersed aluminium oxynitride particles in an alumina matrix has been studied. The kinetics law of this reaction is linear and the activation energy is 420±40 kJ mol^–1 (100±10 kcal mo^–1). A-alumina layer is formed and leads to-alumina above 1200° C. The-alumina formation produces surface compressive stresses, and thus the mechanical properties ( _f, HV) are improved. We have proved that the formation of-alumina in the Al₂O₃-AION composite can lead to the best properties for this ceramic. A-alumina layer has a very interesting effect on the wear resistance of this material.     

Thermal Conductivity of the Four-Leg Spin-Ladder System La2Cu2O5 Single Crystal

We have investigated the magnetic susceptibility, , and the thermal conductivity, , in magnetic fields for the four-leg spin-ladder system La₂Cu₂O₅ single crystal. The in a magnetic field parallel to the ladder exhibits a kink at 130 K in correspondence to the magnetic ordering. The along the ladder exhibits a peak at 25 K and a shoulder at 14 K, which are probably related to the thermal conductivity due to magnons, _magnon, and that due to phonons, _phonon, respectively. The perpendicular to the ladder, on the other hand, exhibits only one broad peak related to _phonon. The observed large anisotropy of has been explained based upon the anisotropy of _magnon.     

Natural convection in a rectangular enclosure in the presence of a magnetic field with uniform heat flux from the side walls

Summary A numerical study is presented for magnetohydrodynamic free convection of an electrically conducting fluid in a two-dimensional rectangular enclosure in which two side walls are maintained at uniform heat flux condition. The horizontal top and bottom walls are thermally insulated. A finite difference scheme comprising of modified ADI (Alternating Direction Implicit) method and SOR (Successive-Over-Relaxation) method is used to solve the governing equations. Computations are carried out over a wide range of Grashof number, Gr and Hartmann number, Ha for an enclosure of aspect ratio 1 and 2. The influences of these parameters on the flow pattern and the associated heat transfer characteristics are discussed. Numerical results show that with the application of an external magnetic field, the temperature and velocity fields are significantly modified. When the Grashof number is low and Hartmann number is high, the central streamlines are elongated and the isotherms are almost parallel representing a conduction state. For sufficiently large magnetic field strength the convection is suppressed for all values of Gr. The average Nusselt number decreases with an increase of Hartmann number and hence a magnetic field can be used as an effective mechanism to control the convection in an enclosure.List of symbols Ar aspect ratio,H/L - B ₀ induction magnetic field - H ₀ magnetic field,H ₀=B ₀/ _m - g gravitational acceleration - Gr Grashof number,gq(L/k)L ³/v ² - H height of the enclosure - Ha Hartmann number, - k thermal conductivity - Nu local Nusselt number - average Nusselt number - p pressure - Pr Prandtl number, / - q heat flux - t time - T dimensionless temperature, (–₀)/q(L/k) - u vertical velocity - U dimensionless vertical velocity,uL/ - v horizontal velocity - V dimensionless horizontal velocity,vL/ - x vertical coordinate - X dimensionless vertical coordinate,x/L - y horizontal coordinate - Y dimensionless horizontal coordinate,y/L - thermal diffusivity - thermal expansion coefficient - temperature - ₀ reference temperature - density - kinematic viscosity - viscosity - _m magnetic permeability - electrical conductivity - stream function - dimensionless stream function, / - dimensionless time,t/L ² - vorticity - dimensionless vorticity, L ²/ - X grid spacing inX-direction - Y grid spacing inY-direction - time increment - ² Laplacian operator     

A.c. conductivity for amorphous TeO2-P2O5 glass system

The a.c. conductivity for the TeO₂-P₂O₅ glassy system was measured in the temperature range 300–573 K and in the frequency range 100 Hz to 10 kHz. The a.c. conductivity () increased with frequency according to the relation ()^s. The frequency exponent s was found to decrease with increasing temperature. The composition dependence of the conductivity was also investigated. The density of states was also calculated using the Elliott model. The a.c. conductivity increased over the studied temperature range. The obtained experimental data have been analysed with reference to various theoretical models. The analysis shows that the correlated barrier hopping (CBH) model is the most appropriate mechanism for conduction in the TeO₂-P₂O₅ glass system.     

Thermal transport properties of helium near the superfluid transition. II. Dilute3He-4He mixtures in the superfluid phase

Measurements of the average thermal conductivity _exp hQ/T and of the thermal relaxation time to reach steady-state equilibrium conditions are reported in the superfluid phase for dilute mixtures of³He in⁴He. Hereh is the cell height,Q is the heat flux, andT is the temperature difference across the fluid layer. The measurements were made over the impurity range 2×10^–9<X(³He)<3×10^–2 and with heat fluxes 0.3<Q<160 µW/cm². Assuming the boundary resistanceR _b , measured forX<10^–5, to be independent ofX over the whole range ofX, a calculation is given for _exp. ForQ smaller than a well-defined critical heat fluxQ _c (X) X ^0.9, _exp is independent of Q and can be identified with the local conductivity _eff, which is found to be independent of the reduced temperature = (T–T)/T for –10^–2. Its extrapolated value at T is found to depart forX10^–3 from the prediction X ^–1 , tending instead to a weaker divergence X ^–a witha0.08. A finite conductivity asX tends to zero is not excluded by the data, however. ForQ >Q _c (X), a nonlinear regime is entered. ForX10^–6, the measurements with the available temperature resolution are limited to the nonlinear conditions, but can be extrapolated into the linear regime forX2×10^–7. The results for _exp(Q),Q _c (X), and _eff(XX) are found to be internally consistent, as shown by comparison with a theory by Behringer based on Khalatnikov's transport equations. Furthermore, the observed relaxation times (X) in the linear regime are found to be consistent forX>10^–5 with the hydrodynamic calculations using the measured _eff(X). ForX<10^–5, a faster relaxation mechanism than predicted seems to dominate. The transport properties in the nonlinear regimes are presented and unexplained observations are discussed.     

Standard Gibbs' energies of formation of BaCuO2, Y2Cu2O5 and Y2BaCuO5

The Gibbs' energies of formation of BaCuO₂, Y₂Cu₂O₅ and Y₂BaCuO₅ from component oxides have been measured using solid state galvanic cells incorporating CaF₂ as the solid electrolyte under pure oxygen at a pressure of 1.01×10⁵ Pa BaO + CuO BaCuO₂ G _f,ox ^o (± 0.3) (kJ mol^–1)=–63.4–0.0525T(K) Y₂O₃ + 2CuO Y₂Cu₂O₂ G _f,ox ^o (± 0.3) (kJ mol^–1)=18.47–0.0219T(K) Y₂O₃ + BaO + CuO Y₂BaCuO₅ G _f,ox ^o (± 0.7) (kJ mol^–1)=–72.5–0.0793T(K) Because the superconducting compound YBa₂Cu₃O_7– coexists with any two of the phases CuO, BaCuO₂ and Y₂BaCuO₅, the data on BaCuO₂ and Y₂BaCuO₅ obtained in this study provide the basis for the evaluation of the Gibbs' energy of formation of the 1-2-3 compound at high temperatures.     

Investigations of the copper isotope effect in oxygen-deficient YBa2Cu3O7−δ

We present data on the copper isotope effect (⁶³Cu-⁶⁵Cu), C_u =-nT_c/nm_Cu, for two isotopic pairs of oxygen-deficient YBa₂Cu₃O_7–, where varies between 0.06 and 0.52. _Cu is below 0.01 at =0.06 (fully oxygenated), it takes values between –0.14 and –0.34 in the 60 K plateau. Larger negative values of _Cu are observed away from the plateau. The dependence of _Cu is similar to that of the pressure effect dnT_c/dP.     

Microstructure, electrochemical surface and electrocatalytic properties of IrO2+Ta2O5 oxide electrodes

X-ray diffraction (XRD) and scanning electron microscopy (SEM) have been used to characterize physical structure of IrO₂+Ta₂O₅ films over the whole composition range by thermodecomposition of chloride solutions heated at 450°C. Solid solubilization between Ta component and IrO₂ rutile in the mixed films was measured, and three typical surface morphologies of the oxide coatings were observed. The surface electrochemical properties of Ti/IrO₂-Ta₂O₅ electrodes were studied by cyclic voltammetry at varying potential scan rate, and a double-layer electrochemical structure containing the inner and outer layers has been distinguished. The voltammetric charge appears to decline with the decrease of grain size of oxide coatings as a result of the effect of surface tension. However, the coatings of 70% IrO₂+30% Ta₂O₅ with the finest grains still exhibit the highest apparent activity for oxygen evolution evaluated by the anodic current at a constant potential. This result is interpreted by the measurements of open-circuit potential (E _oc) and double-layer capacitance (C _dl) using electrochemical impedance spectroscopy (EIS). Thereby, the reliability of voltammetric charge obtained in double-layer potential region in determining the real electrocatalytic activity for O₂ evolution has been discussed.     

Thermal Expansion and Isothermal Compressibility of TlIn1 – xNdxSe2 (0 ≤ x≤ 0.08) Crystals

The thermal expansion coefficient () and isothermal compressibility ( _T ) of TlIn_{1 – x} Nd _x Se₂(0 x 0.08) crystals were measured between 77 and 400 K. In the range 77–160 K, both and _T increase with temperature, the increase in being much steeper. At higher temperatures, and _T change very little. The observed composition dependences of and _T are interpreted in terms of energy-band structure.     

Grain boundary sensitization and desensitization during the ageing of 316L(N) austenitic stainless steels

Two casts of type 316L(N) austenitic stainless steel have been solution treated for 1 h at 1070 C, air-cooled, then aged for up to 20 000 h at temperatures between 550 C and 750 C. Grain boundary precipitation of the M₂₃C₆ phase occurs, and the Cr composition profile normal to the grain boundaries has been determined at high resolution by an analytical electron microscope. The data have been fitted firstly to collector plate models, which indicated that some of the material was in the process of desensitization, or healing, indicated by a rise in the boundary Cr content. The data were then fitted to a model of the Cr profile as a function of ageing treatment in the healing regime, and a good correlation was obtained.