Quantitative analysis of macro and micro-structure of gluten-free rice cakes containing different types of gums baked in different ovens

The effects of different gums on macro-structure of gluten-free rice cakes baked in conventional and infrared–microwave (IR–MW) combination ovens were investigated by using the images obtained by scanner and scanning electron microscopy in this study. The gum types used were xanthan, guar, locust bean, κ-carrageenan and xanthan–guar blend. Cake containing no gum was used as control. It was observed that both addition of different types of gums affected the pore area fraction and percent number of pores of the rice cakes. The highest pore area fraction was obtained in cakes containing xanthan and xanthan–guar blend. Cakes baked in IR–MW combination oven had higher porosity than those baked in conventional oven. Micro-structure of gluten-free rice cakes was also analyzed. According to these results, conventionally baked cakes showed more starch granule deformations. Both granular starch residues and deformed starch structure were observed together in cakes baked in IR–MW combination oven. All of the starch granules did not lose their identity and did not disintegrate completely.     

Optimization of Baking of Rice Cakes in Infrared–Microwave Combination Oven by Response Surface Methodology

In this study, response surface methodology was used to design gluten-free cakes made from rice flour to be baked in infrared-microwave combination oven. Two types of cake formulations containing different types of gums were used in the experiments, which were xanthan gum and xanthan–guar gum blend. The independent variables were emulsifier content (0, 3, and 6% of flour weight), upper halogen lamp power (50, 60, and 70%), and baking time (7, 7.5, and 8 min). Specific volume, surface color change, firmness and weight loss of the cakes were determined for optimization. Cakes formulated with xanthan gum had better quality characteristics than cakes containing xanthan–guar gum blend. Cakes formulated with xanthan gum and 5.28% emulsifier and baked using 60% halogen lamp power for 7 min had the most acceptable quality.     

Effects of different emulsifier types,fat contents,and gum types on retardation of staling of microwave‐baked cakes

The effects of different types of emulsifiers, gums, and fat contents on the retardation of staling of microwave‐baked cakes were investigated. First, different types of emulsifiers (DATEM, Lecigran, and Purawave) at three different fat contents (50%, 25%, and 0%) were added to cake formulations to retard staling of microwave‐baked cakes. Then, three types of gums (guar gum, xanthan gum, and methylcellulose) were added to the optimum formulations chosen. As a control, cakes formulated without any emulsifier or gum addition and baked in an conventional oven at 175°C for 25 min was used. Weight loss, firmness, soluble starch and amylose content of the cakes were used as the indicators of staling criteria. Cakes were baked in a microwave oven for 1.5 min at 100% power. Variation of staling parameters during storage of cakes followed zero‐order kinetics. Use of emulsifiers and gums helped to retard staling of microwave‐baked cakes. Fat content was found to be a significant factor in affecting variation of firmness and weight loss of the cakes during storage. DATEM and Purawave were the most effective emulsifier types. Using gums in combination with emulsifiers gave better moisture retention and softer cakes than using gums alone.     

Effects of different emulsifier types,fat contents,and gum types on retardation of staling of microwave-baked cakes

The effects of different types of emulsifiers, gums, and fat contents on the retardation of staling of microwave-baked cakes were investigated. First, different types of emulsifiers (DATEM, Lecigran, and Purawave) at three different fat contents (50%, 25%, and 0%) were added to cake formulations to retard staling of microwave-baked cakes. Then, three types of gums (guar gum, xanthan gum, and methylcellulose) were added to the optimum formulations chosen. As a control, cakes formulated without any emulsifier or gum addition and baked in an conventional oven at 175 degrees C for 25 min was used. Weight loss, firmness, soluble starch and amylose content of the cakes were used as the indicators of staling criteria. Cakes were baked in a microwave oven for 1.5 min at 100% power. Variation of staling parameters during storage of cakes followed zero-order kinetics. Use of emulsifiers and gums helped to retard staling of microwave-baked cakes. Fat content was found to be a significant factor in affecting variation of firmness and weight loss of the cakes during storage. DATEM and Purawave were the most effective emulsifier types. Using gums in combination with emulsifiers gave better moisture retention and softer cakes than using gums alone.     

A Study on Staling Characteristics of Gluten-Free Breads Prepared with Chestnut and Rice Flours

The effects of chestnut flour and a xanthan–guar gum blend–DATEM mixture on staling of gluten-free rice breads baked in conventional and infrared–microwave combination ovens were studied. Staling properties of the bread were assessed using mechanical compression (TA), differential scanning calorimetry, X-ray diffraction, and fourier transform infrared spectroscopy (FT-IR). Hardness, moisture loss, and retrogradation enthalpy values for all bread samples increased significantly during storage. FT-IR spectra showed that the integrated area of peaks around 1,041 and 1,150 cm^?1 wave lengths, which are related to the structure of starch retrogradation, increased with storage time. The X-ray diffractograms of aged breads indicated a B-type structure with the appearance of peaks at around 17°, 19.5°, and 22°. An additional peak at 24° was observed in breads stored for longer periods. Higher values of hardness and lower moisture contents were obtained for breads baked in an infrared–microwave combination oven, but the use of infrared–microwave combination oven did not result in excessive hardness after storage. Retrogradation enthalpies and total crystallinity values of breads did not show significant differences with baking type.The replacement of rice flour with chestnut flour and addition of xanthan–guar gum blend–DATEM mixture in formulations significantly delayed staling of gluten-free breads by decreasing moisture loss, hardness, retrogradation enthalpy, and total mass crystallinity.     

A study on the effects of different gums on dielectric properties and quality of breads baked in infrared-microwave combination oven

In this study, the effects of different gums on dielectric properties of doughs and breads baked in infrared-microwave combination oven were investigated. In addition, the quality parameters of breads formulated with different gums baked in infrared-microwave combination oven were determined. The gums used were xanthan, guar, xanthan-guar blend and κ-carrageenan. The gums were added to the formulation at 0.5% concentration. The dielectric properties and quality parameters of breads baked in infrared-microwave combination oven were found to be dependent on gum type. κ-carrageenan resulted in undesirable final bread quality, while xanthan-guar blend addition improved bread quality (high specific volume and porosity, low hardness values). The dielectric properties of bread samples formulated with κ-carrageenan were found to be the highest among the other gum types.     

Image Analysis of Gluten-free Breads Prepared with Chestnut and Rice Flour and Baked in Different Ovens

In this study, the effects of chestnut flour and xanthan–guar gum blend–emulsifier DATEM mixture addition on macro- and microstructure of rice breads baked in conventional and infrared–microwave combination ovens were investigated by using the images obtained by a scanner and scanning electron microscopy (SEM). Pore area fraction, pore size distribution, and roundness values of pores were determined. The highest pore area fraction values were obtained in breads prepared by replacement of 46 % of rice flour with chestnut flour containing xanthan–guar gum blend–DATEM mixture and baked in an infrared–microwave combination oven. On the other hand, rice breads containing no additives or chestnut flour had the lowest pore area fraction values. Infrared–microwave combination baking increased both pore area fraction values and total number of pores. Infrared–microwave combination baking caused approximately 23–28 % increase in number of the small pores (0–5 mm²) in rice breads and 71 % increase in number of the large pores (>10 mm²) in chestnut–rice breads. The fiber content and larger starch granules of chestnut flour contributed towards the stabilization of gas bubbles resulting in better crumb structure. More homogenous pore distributions were observed when additives and an infrared–microwave combination oven were used. When microstructure of gluten-free breads was investigated, it was seen that starch granules in chestnut–rice breads baked in an infrared–microwave combination oven did not disintegrate completely.     

The effects of gums on macro and micro-structure of breads baked in different ovens

In this study, the effects of gums on macro and micro-structure of breads baked in different ovens (infrared (IR)-microwave combination and conventional) were investigated by the help of image and SEM analysis, respectively. The gums used were xanthan, guar, κ-carrageenan and xanthan-guar blend. The gums were added to the formulation at 0.5% concentration. As a control, no gum added formulations were used. Results of Image analysis demonstrated that xanthan-guar gum blend addition improved bread quality with increasing pore area fractions. It was seen that about 75% of the pores of control breads baked in infrared-microwave combination oven and about 63% of the pores of control breads baked in conventional oven had diameters of above 1000 μm. According to SEM analysis, pores in control breads baked in conventional oven were found to be smaller, and had spherical, oval-like shape as compared to the ones baked in IR-microwave combination oven. Moreover, more homogeneous closed-cell structure was observed for conventionally baked control breads. The pores of breads baked in IR-microwave combination oven were so close to each other which resulted in coalescence of the gas cells to form channels, then the pores were no longer spherical. The starch granules in conventionally baked breads were more distorted and seen as a continuous sheet of gelatinized starch. On the other hand, granular residues and continuous starch structure was observed together in IR-microwave combination heating.     

Optimisation of formulations and infrared–microwave combination baking conditions of chestnut–rice breads

The main objective of this study was to design gluten‐free breads containing chestnut and rice flour and xanthan–guar gum blend to be baked in infrared–microwave combination oven. Response surface methodology (RSM) was used to optimise gluten‐free bread formulations and processing conditions. Weight loss, firmness, specific volume and colour change of the breads were determined. Rice flour mixed with different proportions of chestnut flour and different emulsifier contents were used to prepare breads. The gluten‐free formulations were baked using different upper halogen lamp powers, microwave powers and baking time which were varied from 40% to 80%, 30% to 70% and 9 to 17 min, respectively. Gluten‐free breads and wheat breads baked in conventional oven were used for comparison. Breads containing 46.5% chestnut flour and 0.62% emulsifier and baked using 40% infrared and 30% microwave power for 9 min had statistically comparable quality with conventionally baked ones.     

Investigation of physicochemical properties of breads baked in microwave and infrared-microwave combination ovens during storage

Staling of breads baked in different ovens (microwave, infrared-microwave combination and conventional) was investigated with the help of mechanical (compression measurements), physicochemical (DSC, X-ray, FTIR) and rheological (RVA) methods. The effect of xanthan-guar gum blend addition on bread staling was also studied. Xanthan-guar gum blend at 0.5% concentration was used in bread formulation. The gums were mixed at equal concentrations to obtain the blend. After baking, the staling parameters of breads were monitored over 5 days storage. During storage, it was seen that hardness, retrogradation enthalpies, setback viscosity, crystallinity values, and FTIR outputs related to starch retrogradation of bread samples increased, whereas FTIR outputs related to moisture content of samples decreased significantly with time. The hardness, retrogradation enthalpy, setback viscosity, and crystallinity values of microwave-baked samples were found to be highest among other heating modes. Using IR-microwave combination heating made it possible to produce breads with similar staling degrees as conventionally baked ones in terms of retrogradation enthalpy and FTIR outputs related to starch retrogradation. Addition of xanthan-guar gum blend decreased hardness, retrogradation enthalpy and total mass crystallinity values of bread samples showing that staling was delayed.     

The role of xanthan gum in the quality of gluten free cakes: improved bakery products for coeliac patients

The aim of this study was to compare the characteristics of gluten free cakes prepared with rice and corn flours and with different concentrations of xanthan gum. Three formulae were created, F1, F2, and F3, with xanthan 0.2%, 0.3% and 0.4%, respectively. Two controls were used, both without xanthan: C1 and C2 (with wheat flour instead of rice flour). The cakes were characterised with chemical, physical, and sensory analysis. The sensory attributes of preference only of the gluten free F2 and F3 cakes were tested. Cakes formulated with xanthan gum displayed improved quality characteristics such as increased specific volume, enhanced texture in terms of decreased firmness, and delayed staling. The F2 and F3 formulated cakes presented desirable quality characteristics that resembled the physical, chemical, and sensory attributes of traditional cakes formulated with wheat flour.     

Effect of Some Stabilizers on Textural and Sensory Characteristics of Yogurt Ice Cream from Sheep's Milk

Yogurt ice cream made of 6.5% sheep's milk fat and 11.5% of nonfat milk solids (MSNF) derived by 83% from sheeps milk contained decreased lactose and increased protein by approximately 20% and 25%, respectively, compared to the conventional product from cow's milk. Acidity of the final product was from pH 4.4 to 4.9. Stabilizers that were tried were xanthan gum, guar gum and a commercial stabilizer at concentrations 0.0, 0.1, 0.2, 0.3, 0.4, and 0.5%. Based on determinations of physical qualities as well as on the sensory evaluation of the yogurt ice cream, xanthan gum gave optimum results at 0.2% concentration, guar gum at 0.3% while the commercial stabilizer was partially satisfactory up to 0.5% concentration.     

Optimization of Gluten-Free Formulations for French-Style Breads

ABSTRACT:  The formulation of gluten-free bread, which will be suitable for patients with coeliac disease, was optimized to provide bread similar to French bread. The effects of the presence of hydrocolloids and the substitution of the flour basis by flour or proteins from different sources were studied. The added ingredients were (1) hydrocolloids (carboxymethylcellulose [CMC], guar gum, hydroxypropylmethylcellulose [HPMC], and xanthan gum), and (2) substitutes (buckwheat flour, whole egg powder, and whey proteins). The bread quality parameters measured were specific volume, dry matter of bread, crust color, crumb hardness, and gas cell size distribution. Specific volume was increased by guar gum and HPMC. Breads with guar gum had color characteristics similar to French bread. Hardness decreased with the addition of hydrocolloids, especially HPMC and guar. Breads with guar gum had the most heterogeneous cell size distribution, and guar gum was therefore selected for further formulations. Bread prepared with buckwheat flour had improved quality: an increased specific volume, a softer texture, color characteristics, and gas-cell size distribution similar to French bread. Bread with 1.9% guar gum (w/w, total flour basis) and 5% buckwheat flour (of all flours and substitutes) mimicked French bread quality attributes.     

Partial Replacement of Egg White Proteins with Whey Proteins in Angel Food Cakes

This study was conducted to investigate the effects of partial replacement of egg white proteins (EWP) with whey protein isolate (WPI) on the appearance, structure, texture, and sensory properties of angel food cakes baked in conventional and microwave/conventional ovens. Factors studied were: 1) replacement of 25% or 50% of EWP with WPI; 2) added xanthan gum (XG), methyl cellulose (MC), cupric sulfate (Cu⁺²) or sodium phosphate (PHOS); and 3) conventional vs microwave/conventional oven baking. EWP replacement cakes without additives were generally inferior to 100% EWP control cakes, whereas EWP replacement cakes with added XG were most similar to 100% EWP control cakes with respect to appearance, texture, and sensory properties and those with added MC exhibited air cell size distributions that most closely resembled control cakes. The other additives and microwave/ conventional vs conventional baking had minor effects on the quality of EWP replacement cakes.     

响应面法优化复合植物蛋白饮品的稳定体系

用响应面方法对复合植物蛋白饮品的稳定体系进行了优化。先用全因子实验对稳定剂组分卡拉胶、瓜尔豆胶、黄原胶和结冷胶对复合植物蛋白饮品沉淀量的影响进行了评价,并找出主要影响因子为瓜尔豆胶和结冷胶,其它组分对沉淀量没有显著影响。采用中心组合设计及响应面分析确定主要影响因子的最佳浓度。稳定体系的最佳组成为(g/L):卡拉胶0.2、瓜尔豆胶0.5、黄原胶0.2、结冷胶0.5,此条件下复合植物蛋白饮品表现出良好的稳定性。     

Rheological properties of gluten-free bread formulations

In this study, the rheological properties of rice bread dough containing different gums with or without emulsifiers were determined. In addition, the quality of rice breads (volume, firmness and sensory analysis) was evaluated. Different gums (xanthan gum, guar gum, locust bean gum (LBG), hydroxyl propyl methyl cellulose (HPMC), pectin, xanthan–guar, and xanthan–LBG blend) and emulsifiers (Purawave^™ and DATEM) were used to find the best formulation for gluten-free breads. Rice dough and wheat dough containing no gum and emulsifier were used as control formulations. The rice dough containing different gums with or without emulsifiers at 25 °C showed shear-thinning behavior with a flow behavior index (n) ranging from 0.33–0.68 (except pectin containing samples) and consistency index (K) ranging from 2.75–61.7 Pa sⁿ. The highest elastic (G′) and loss (G″) module were obtained for rice dough samples containing xanthan gum, xanthan–guar and xanthan–LBG blend with DATEM. When Purawave^™ was used as an emulsifier, dough samples had relatively smaller consistency index and viscoelastic moduli values compared to DATEM. The viscoelastic parameters of rice dough were found to be related to bread firmness. Addition of DATEM improved bread quality in terms of specific volume and sensory values.     

SIMULATING VISCOELASTIC PROPERTIES OF SELECTED FOOD GUMS AND GUM MIXTURES USING A FRACTIONAL DERIVATIVE MODEL

A four parameter semi-empirical model has been developed using the fractional derivative (FD) theory, which consists of applying a mathematical operator to a constitutive equation. The Fourier transform approach is used to obtain the analytical function of the derived model. Since a single four parameter model can predict both storage modulus (G') and dynamic viscosity (η'), the developed FD model was appropriate in describing the viscoelastic properties of selected food gum dispersions, food gum mixtures and gellan gel. This fractional derivative model shows good simulation capability for selected food gum dispersions (0.5% xanthan gum, 0.5 and 0.75% locust bean gum, and 0.5, 0.75, and 1.0% guar gum), 0.6% gellan gel, and binary mixtures of carrageenan and guar gum, car-rageenan and xanthan, as well as guar and xanthan gum.     

Rheological behaviour of pullulanase-treated guar galactomannan on co-gelation with xanthan

The present study involves the use of non-specific enzyme pullulanase (from Bacillus acidopullulyticus) to remove galactose residues from guar galactomannan to obtain modified guar galactomannan mimicking the functional properties of locust bean gum. The modified guar galactomannan blended with xanthan exhibited the rheological behaviour of elastic modulus (G′) greater than viscous modulus (G″) with a decrease in tan δ value similar to locust bean gum/xanthan blend. Also a twofold increase in the magnitude of elasticity compared to xanthan alone suggested the synergistic interaction with formation of three dimensional networks. The modified guar galactomannan with galactose content of 21% and M:G ratio 1:3.8, almost akin to locust bean gum, showed a better interaction with xanthan. Dynamic stress sweep study of modified guar galactomannan/xanthan blend with increased yield stress of 800 dynes/cm² also indicated the synergistic behaviour. Modified guar galactomannan also revealed the maximum synergistic interaction with xanthan at a mixing temperature of 60 °C than at 20 °C, 30 °C, 40 °C and 50 °C, respectively. Modification of guar galactomannan by pullulanase is an alternative route to produce galactose-depleted guar galactomannan with enhanced rheological functionalities on co-gelation with xanthan, as a cost effective replacement to locust bean gum.     

黄原胶与几种胶复配对花生乳稳定性的影响

研究了黄原胶分别与刺槐豆胶、瓜尔豆胶、魔芋胶复配对花生乳稳定性的影响,通过分析样品沉淀率、油脂析出率、粘度及高温稳定性观察,结果表明,黄原胶与瓜尔豆胶复配时花生乳稳定性最好,最佳复配比例为黄原胶:瓜尔豆胶=1:2,最佳复配用量为0.05 %.     

How Do Xanthan and Hydroxypropyl Methylcellulose Individually Affect the Physicochemical Properties in a Model Gluten‐Free Dough?

To better understand the physicochemical changes imparted by hydrocolloids on gluten-free dough, 2 hydroxypropyl methylcelluloses (HPMCs) and xanthan gum were added at 2%, 3%, and 5% to rice cassava dough without the addition of alternative proteins. The formulated doughs were analyzed using thermoanalytic and rheological techniques to determine the role of water and subsequent flow behavior upon hydrocolloid addition. The baked loaves were then measured for specific loaf volume and tensile strength to determine bread quality. Thermogravimetric analysis (TGA) results revealed that hydrocolloid-added dough held water more tightly than the rice cassava control with an additional water distribution at 85 to 88 °C. Rheologically, the increase of elastic moduli in the low methoxy HPMC and xanthan-added dough became more pronounced with gum addition; however, both HPMC formulations had increased viscous moduli allowing the gas cells to expand without collapsing. In the bread, the final specific loaf volume increased with high methoxy HPMC (2% to 5%) and low methoxy HPMC (2%) but was depressed with increased addition of low methoxy HPMC (5%) and xanthan (3% and 5%). Crumb hardness was decreased in high methoxy HPMC loaves but was increased significantly in low methoxy HPMC (5%) and xanthan (5%) formulations. From the gums studied, it was concluded that high methoxy HPMC was the optimum hydrocolloid in the rice cassava gluten-free dough. PRACTICAL APPLICATION: Two types of hydrocolloids, xanthan gum and HPMC, were individually added to a gluten-free rice cassava formulation. Based on the thermoanalytic and rheological studies on dough, as well as the bread quality studies, high methoxy HPMC at 5% addition was determined to optimally improve the bread quality when only gum addition was considered. This study indicates the potential use of high methoxy HPMC as an additive in gluten-free bread formulations prior to considering alternative proteins.