Effect of biomass blending on coal ignition and burnout during oxy-fuel combustion

Oxy-fuel combustion is a GHG abatement technology in which coal is burned using a mixture of oxygen and recycled flue gas, to obtain a rich stream of CO₂ ready for sequestration. An entrained flow reactor was used in this work to study the ignition and burnout of coals and blends with biomass under oxy-fuel conditions. Mixtures of CO₂/O₂ of different concentrations were used and compared with air as reference. A worsening of the ignition temperature was detected in CO₂/O₂ mixtures when the oxygen concentration was the same as that of the air. However, at an oxygen concentration of 30% or higher, an improvement in ignition was observed. The blending of biomass clearly improves the ignition properties of coal in air. The burnout of coals and blends with a mixture of 79%CO₂-21%O₂ is lower than in air, but an improvement is achieved when the oxygen concentration is 30 or 35%. The results of this work indicate that coal burnout can be improved by blending biomass in CO₂/O₂ mixtures.     

Comparisons of pulverized coal combustion in air and in mixtures of O2/CO2

Pulverized coal combustion in air and the mixtures of O₂/CO₂ has been experimentally investigated in a 20 kW down-fired combustor (190 mm id×3 m). Detailed comparisons of gas temperature profiles, gas composition profiles, char burnouts, conversions of coal–N to NO_x and coal–S to SO₂ and CO emissions have been made between coal combustion in air and coal combustion in various O₂/CO₂ mixtures. The effectiveness of air/oxidant staging on reducing NO_x emissions has also been investigated for coal combustion in air and O₂/CO₂ mixtures. The results show that simply replacing the N₂ in the combustion air with CO₂ will result in a significant decrease of combustion gas temperatures. However, coal combustion in 30% O₂/70% CO₂ can produce matching gas temperature profiles to those of coal combustion in air while having a lower coal–N to NO_x conversion, a better char burnout and a lower CO emission. The results also confirm that air/oxidant staging is very effective in reducing NO_x emissions for coal combustion in both air and a 30% O₂/70% CO₂ mixture. SO₂ emissions are proved to be almost independent of the combustion media investigated.     

Coal combustion in O2/CO2 mixtures compared with air

As part of CO₂ abatement strategies for climate change, we are investigating coal combusion behaviour in various O₂/CO₂ mixtures and in air. The goal is to simulate conditions of coal combustion with flue gas recirculation in order to maximize the CO₂ concentration in the flue gas prior to its recovery. A western Canadian sub‐bituminous coal and a U.S. eastern bituminous coal were investigated. Thermal input was set at 0.21 MW with a flue gas oxygen concentration of 5 vol%. Experiments were done using various O₂/CO₂ mixtures and air. The oxygen concentration ranged from 21% to 42%. Up to 95% CO₂ concentrations were achieved in the flue gas. This paper describes experimental results in terms of flame temperatures and pollutant emissions (NO_x', SO₂ and CO).     

In situ diagnostics of Victorian brown coal combustion in O2/N2 and O2/CO2 mixtures in drop-tube furnace

Experimental investigation of the combustion of an air-dried Victorian brown coal in O₂/N₂ and O₂/CO₂ mixtures was conducted in a lab-scale drop-tube furnace (DTF). In situ diagnostics of coal burning transient phenomena were carried out with the use of high-speed camera and two-colour pyrometer for photographic observation and particle temperature measurement, respectively. The results indicate that the use of CO₂ in place of N₂ affected brown coal combustion behaviour through both its physical influence and chemical interaction with char. Distinct changes in coal pyrolysis behaviour, ignition extent, and the temperatures of volatile flame and burning char particles were observed. The large specific heat capacity of CO₂ relative to N₂ is the principal factor affecting brown coal combustion, which greatly quenched the ignition of individual coal particles. As a result, a high O₂ fraction of at least 30% in CO₂ is required to match air. Moreover, due to the accumulation of unburnt volatiles in the coal particle vicinity, coal ignition in O₂/CO₂ occurred as a form of volatile cloud rather than individual particles that occurred in air. The temperatures of volatile flame and char particles were reduced by CO₂ quenching throughout coal oxidation. Nevertheless, this negative factor was greatly offset by char-CO₂ gasification reaction which even occurred rapidly during coal pyrolysis. Up to 25% of the nascent char may undergo gasification to yield extra CO to improve the reactivity of local fuel/O₂ mixture. The subsequent homogeneous oxidation of CO released extra heat for the oxidation of both volatiles and char. As a result, the optical intensity of volatile flame in ∼27% O₂ in CO₂ was raised to a level twice that in air at the furnace temperature of 1273 K. Similar temperatures were achieved for burning char particles in 27% O₂/73% CO₂ and air. As this O₂/CO₂ ratio is lower than that for bituminous coal, 30-35%, a low consumption of O₂ is desirable for the oxy-firing of Victorian brown coal. Nevertheless, the distinct emission of volatile cloud and formation of strong reducing gas environment on char surface may affect radiative heat transfer and ash formation, which should be cautioned during the oxy-fuel combustion of Victorian brown coal.     

Air and oxy-fuel combustion behaviour of petcoke/lignite blends

The pyrolysis and combustion behaviour of a petroleum coke (petcoke), an indigenous lignite and their 70/30 wt.% blend in air and oxy-fuel conditions were investigated by using non-isothermal thermo-gravimetric method (TGA) coupled with Fourier transform infrared (FTIR) spectrometer. Blend samples were prepared by mixing lignite, which has low calorific value, high ash and moisture contents with petcoke that has high calorific value, low ash and moisture content, in the proportion of 70:30. Pyrolysis tests were carried out in nitrogen and carbon dioxide environments which are the main diluting gases of air and oxy-fuel environments, respectively. Pyrolysis curves of parent fuels and their blend reveal close resemblance up to 700 °C in both N₂ and CO₂ environments. At higher temperatures, further weight loss taking place in N₂ and CO₂ atmospheres is attributed to calcite decomposition and CO₂-char gasification reaction, respectively. Gasification reaction leads to significant increase in CO and COS formation as observed in FTIR evolution profiles. Almost identical experimental and theoretical pyrolysis profiles of the blend samples show that there is no synergy between the parent fuels of the blend in both pyrolysis environments. Combustion experiments were carried out in four different atmospheres; air, oxygen-enriched air environment (30% O₂–70% N₂), oxy-fuel environment (21% O₂–79% CO₂) and oxygen-enriched oxy-fuel environment (30% O₂–70% CO₂). Combustion experiments show that replacing nitrogen in the gas mixture by the same concentration of CO₂ leads to delay in combustion (lower maximum rate of weight loss and higher burnout temperatures). Overall comparison of derivative thermogravimetry (DTG) profiles shows that effect of oxygen content on combustion characteristics is more significant than that of diluting gas in the combustion environment. At elevated oxygen levels, profiles shift through lower temperature zone, peak and burnout temperatures decrease, weight loss rate increases significantly and complete combustion is achieved at lower temperatures and shorter times. Theoretical and experimental combustion profiles of the blend mainly display different trends, which indicate synergistic interactions between lignite and petcoke during their combustion in different environments.     

Differences in reactivity of pulverised coal in air (O2/N2) and oxy-fuel (O2/CO2) conditions

The reactivity of four pulverised Australian coals were measured under simulated air (O₂/N₂) and oxy-fuel (O₂/CO₂) environments using a drop tube furnace (DTF) maintained at 1673 K and a thermogravimetric analyser (TGA) run under non-isothermal (heating) conditions at temperatures up to 1473 K. The oxygen concentration, covering a wide and practical range, was varied in mixtures of O₂/N₂ and O₂/CO₂ in the range of 3 to 21 vol.% and 5 to 30 vol.%, respectively. The apparent volatile yield measured in CO₂ in the DTF was greater than in N₂ for all the coals studied. Pyrolysis experiments in the TGA also revealed an additional mass loss in a CO₂ atmosphere, not observed in a N₂ atmosphere, at relatively high temperatures. The coal burnout measured in the DTF at several O₂ concentrations revealed significantly higher burnouts for two coals and similar burnouts for the other two coals in oxy-fuel conditions. TGA experiments with char also revealed higher reactivity at high temperatures and low O₂ concentration. The results are consistent with a char–CO₂ reaction during the volatile yield experiments, but additional experiments are necessary to resolve the mechanisms determining the differences in coal burnout.     

The effect of O2 enrichment on NOx formation in biomass co-fired pulverised coal combustion

Oxygen enrichment of the combustion air in pulverised coal combustion for power plant is seen as a possible retrofit measure to improve CO₂ scrubbing and capture. This technique produces a reduced volume of flue gas with higher CO₂ concentration than normal air combustion that will contributes to the enhancement of amine scrubbing plant efficiencies. We report in this article the results of a study at the small pilot scale into the effect of these combustion modifications on the formation of NO_x and associated carbon burnout changes. Experiments were performed using a Russian coal, typical of that used in some UK power stations with shea meal and Pakistani cotton stalk as biomass fuels co-fired at a fraction of 15%th. The down-fired pulverised coal combustor was operated at 20 kWth under air-staged conditions for NO_x control and the secondary and over-fire air flows were both enriched by up to 79% (100% O₂) for a range of splits giving a 35% overall O₂ concentration for full enrichment. When the same enrichment process was applied to biomass/coal combustion different behaviour was observed with respect to NO_x formation. We have shown that oxygen enrichment can achieve benefits of improved carbon burnout with a positive impact on NO_x emissions over and above the primary aim of increasing CO₂ concentration in the flue gas for enhanced capture efficiencies. With all other conditions of overall stoichiometry, OFA levels and O₂ enrichment levels remaining the same, NO_x levels at 22% OFA initially increased over the range of secondary air enrichment, particularly for shea meal/coal co-firing. At 31% OFA the trends were to lower NO_x at high enrichment levels. However, co-firing with shea meal initially showed an increase in NO_x emission at lower levels of enrichment (up to 40% O₂) followed by overall lower NOx emissions at 100% O₂ in the secondary air. The results show that NO_x emissions can either increase or decrease depending on the operating conditions. The differences in behaviour are attributed, not only to the effects of enrichment on the stoichiometry of the near-burner zone, but also on the flame dynamics and intensity of combustion related to the associated reductions in gas velocity and swirl intensity by the transition from air to pure O₂ in the secondary oxidant stream.     

Pulverized coal combustion in air and in O2/CO2 mixtures with NOx recycle

This paper presents experimental results of a 20 kW vertical combustor equipped with a single pf-burner on pulverised coal combustion in air and O₂/CO₂ mixtures with NO_x recycle. Experimental results on combustion performance and NO_x emissions of seven international bituminous coals in air and in O₂/CO₂ mixtures confirm the previous findings of the authors that the O₂ concentration in the O₂/CO₂ mixture has to be 30% or higher to produce matching temperature profiles to those of coal-air combustion while coal combustion in 30% O₂/70% CO₂ leads to better coal burnout and less NO_x emissions than coal combustion in air. Experimental results with NO_x recycle reveal that the reduction of the recycled NO depends on the combustion media, combustion mode (staging or non-staging) and recycling location. Generally, more NO is reduced with coal combustion in 30% O₂/70% CO₂ than with coal combustion in air. Up to 88 and 92% reductions of the recycled NO can be achieved with coal combustion in air and in 30% O₂/70% CO₂ respectively. More NO is reduced with oxidant staging than without oxidant staging when NO is recycled through the burner. Much more NO is reduced when NO recycled through the burner (from 65 to 92%) than when NO is recycled through the staging tertiary oxidant ports (from 33 to 54%). The concentration of the recycled NO has little influence on the reduction efficiency of the recycled NO with both combustion media—air and 30% O₂/70% CO₂.     

Optical Coal Particle Temperature Measurement under Oxy‐Fuel Conditions: Measurement Methodology and Initial Results

Coal combustion under oxy‐fuel conditions shows significant differences to combustion in air. Examinations on the single‐grain level give detailed insight into the combustion phenomena of ignition, volatile combustion, and char burnout and, therefore, provide the fundamentals for the development of large‐scale oxy‐fuel facilities. The combustion of a hard coal in a size fraction of d_p = 90–125 μm was investigated in a laminar flow reactor at a temperature of 1500 K. The gaseous fuel oxidizer contained 3 % O₂ by volume and CO₂ or N₂ as diluents. A third measurement in a CO₂‐rich atmosphere containing 9 % O₂ is also presented to show the influence of O₂ concentration. Particle temperatures were measured for three residence times with an imaging two‐color pyrometer.     

Coal char combustion under a CO2-rich atmosphere: Implications for pulverized coal injection in a blast furnace

Pulverized coal injection (PCI) is employed in blast furnace tuyeres attempting to maximize the injection rate without increasing the amount of unburned char inside the stack of the blast furnace. When coal is injected with air through the injection lance, the resolidified char will burn in an atmosphere with a progressively lower oxygen content and higher CO₂ concentration. In this study an experimental approach was followed to separate the combustion process into two distinct devolatilization and combustion steps. Initially coal was injected into a drop tube furnace (DTF) operating at 1300 °C in an atmosphere with a low oxygen concentration to ensure the combustion of volatiles and prevent the formation of soot. Then the char was refired into the DTF at the same temperature under two different atmospheres O₂/N₂ (typical combustion) and O₂/CO₂ (oxy-combustion) with the same oxygen concentration. Coal injection was also performed under a higher oxygen concentration in atmospheres typical for both combustion and oxy-combustion. The fuels tested comprised a petroleum coke and coals currently used for PCI injection ranging from high volatile to low volatile bituminous rank. Thermogravimetric analyses and microscopy techniques were used to establish the reactivity and appearance of the chars.     

Theoretical and experimental study on the emission characteristics of waste plastics incineration by modified O2/RFG combustion technology

For mitigating the emission of greenhouse gas CO₂ from general air combustion systems, a clean combustion technology O₂/RFG is in development. The O₂/RFG combustion technology can significantly enhance the CO₂ concentration in the flue gas; however, using almost pure oxygen or pure CO₂ as feed gas is uneconomic and impractical. As a result, this study proposes a modified O₂/RFG combustion technology in which the minimum pure oxygen is mixed with the recycled flue gas and air to serve as the feed gas. The effects of different feed gas compositions and ratios of recycled flue gas on the emission characteristics of CO₂, CO and NO_x during the plastics incineration are investigated by theoretical and experimental approaches.Theoretical calculations were carried out by a thermodynamic equilibrium program and the results indicated that the emissions of CO₂ were increased with the O₂ concentrations in the feed gas and the ratios of recycled flue gas increased. Experimental results did not have the same trends with theoretical calculations. The best feed gas composition of the modified O₂/RFG combustion was 40% O₂ + 60% N₂ and the best ratio of recycled flue gas was 15%. As the O₂ concentration in feed gas and the ratio of recycled flue gas increased, the total flow rates and pressures of feed gas reduced. The mixing of solid waste and feed gas was incomplete and the formation of CO₂ decreased. Moreover, the emission of CO was decreased as the O₂ concentration in feed gas and the ratio of recycled flue gas increased. The emission of NO_x gradually increased with rising the ratio of recycled flue gas at lower O₂ concentration (<40%) but decreased at higher O₂ concentration (>60%).     

Effects of operation parameters on NO emission in an oxy-fired CFB combustor

Oxy-fuel Circulating Fluidized Bed (CFB) combustion technology, a very promising technology for CO₂ capture, combines many advantages of oxy-fuel and CFB technologies. Experiments were carried out in a 50 kW_th CFB facility to investigate how operation parameters influence the NO emission in O₂/CO₂ atmospheres. The simulated O₂/CO₂ atmospheres were used without recycling the flue gas. Results show that NO emission in 21% O₂/79% CO₂ atmosphere is lower than that in air atmosphere because of lower temperature and higher char and CO concentrations in the dense bed. Elevating O₂ concentration from 21% to 40% in O₂/CO₂ atmosphere enhances fuel-N conversion to NO. Increasing bed temperature or oxygen/fuel stoichiometric ratio brings higher NO emission in O₂/CO₂ atmosphere, which is consistent with the results in air-fired CFB combustion. As primary stream fraction increases, NO emission increases more rapidly in O₂/CO₂ atmosphere than that in air atmosphere. Stream staging is more efficient for controlling NO emission in oxy-CFB combustion than that in air combustion. Oxygen staging provides an efficient way to reduce NO emission in oxy-CFB combustion without influencing the hydrodynamic characteristic in the riser.     

Air and oxy-fuel combustion characteristics of biomass/lignite blends in TGA-FTIR

Pyrolysis and combustion behavior of indigenous lignite, olive residue and their 50/50 wt.% blend in air and oxy-fuel conditions were investigated by using thermogravimetric analyser (TGA) combined with Fourier-transform infrared (FTIR) spectrometer. Pyrolysis tests were carried out in nitrogen and carbon dioxide environments which are the main diluting gasses of air and oxy-fuel environment, respectively. Pyrolysis results of the parent fuels and the blend show that weight loss profiles are almost the same up to a temperature of 700 °C in these two environments, indicating that CO₂ behaves as an inert gas in this temperature range. However, further weight loss takes place in CO₂ atmosphere at higher temperatures due to CO₂-char gasification reaction which leads to significant increase in CO and COS formation as observed in FTIR evolution profiles. Comparison between experimental and theoretical pyrolysis profiles of the blend samples reveals that there is no synergy in both atmospheres. Combustion experiments were carried out in four different atmospheres; air, oxygen-enriched air environment (30% O2-70% N₂), oxy-fuel environment (21% O₂-79% CO₂) and oxygen-enriched oxy-fuel environment (30% O2-70% CO₂). Replacing N₂ in the combustion environment by CO₂ causes slight delay (lower maximum rate of weight loss and higher burnout temperature) in the combustion of all samples. However, this effect is found to be more significant for olive residue than lignite. Elevated oxygen levels shift combustion profiles to lower temperatures and increase the rate of weight loss. Combustion profiles of olive residue/lignite blends lie between those of individual fuels. Comparison between experimental and theoretical combustion profiles and characteristic temperatures of the blend samples indicates synergistic interactions between the parent fuels during co-combustion of olive residue and lignite.     

煤粉O2/CO2燃烧时PM2.5及其Fe、S的生成特性

沉降炉实验研究了煤粉O2/CO2燃烧时PM2.5的生成特性和主要成灰元素中危害较大的Fe、S元素生成特性.实验用DT烟煤、NMG褐煤和XLT褐煤,实验温度1300℃,在O2/CO2=1:9,1:4,3:7和O2/N2=1:4气氛下燃烧.低压撞击器(DLPI)按不同粒径大小从0.03～9.8μm共分为13级,分别收集燃烧...     

Experimental investigation of NOx emissions in oxycoal combustion

This work presents the results of an experimental investigation on NO_x emissions from coal combustion in a pilot scale test facility. Three oxidiser atmospheres have been compared, namely air, CO₂/O₂, and O₂ enriched recirculated flue gas. NO_x emissions from two different combustion modes have been studied, swirl flame and flameless combustion. The influence of the burner oxygen ratio and the oxidiser O₂ concentration on NO_x formation and reduction have been analysed. With increasing burner oxygen ratio, an increase of NO_x emissions has been obtained for air and CO₂/O₂ in both, swirl flame and flameless combustion. In case of the swirl flame, flue gas recirculation leads to a reduction of NO_x emissions up to 50%, whereas in case of flameless combustion this reduction is around 40% compared to CO₂/O₂. No significant impact of the oxidiser O₂ concentration in the CO₂/O₂ mixture on NO_x emissions is observed in the range between 18 and 27 vol.% in swirl flames. An analysis of NO_x formation and reduction mechanisms showed, that the observed reduction of NO_x emissions by flue gas recirculation cannot be attributed to the reduction of recirculated NO_x alone, but also to a reduced conversion of fuel-N to NO.     

Effect of carbon dioxide on flame propagation of pulverized coal clouds in CO2/O2 combustion

CO₂/O₂ combustion of pulverized coal is one of the promising new technology in order to reduce the emission of CO₂ and NO_x from coal combustion furnaces. However, several experiments with pulverized coal burners show that temperature and stability of pulverized coal flame is reduced in this condition. CO₂ has distinctive thermodynamic and optical property compared with that of other gas, and it is important to know the effect of CO₂ on the flame stability of pulverized coal. In this study, effect of CO₂ on flame propagation velocity of pulverized coal clouds were studied experimentally using micro-gravity condition, and also numerically considering detailed radiation heat exchange using Monte Carlo method.Experiments were made by using spherical chamber with inner diameter of 200 mm. Micro-gravity condition was used in order to achieve uniform pulverized coal cloud in a chamber. Flame propagation velocity was measured from the photographic image of the flame front by using high speed camera. Results show that flame propagation velocity of pulverized coal cloud in CO₂/O₂ mixture gas decreases to about 1/3–1/5 of that in N₂/O₂ mixture gas at the same oxygen concentration. By using Ar/O₂ mixture gas, it is revealed that thermal diffusivity of gas seems to have a large effect on flame propagation velocity. From the numerical analysis using Monte Carlo method, effect of absorption of radiation by CO₂ gas is proven to be relatively small compared with that of thermodynamic property especially for heat capacity of CO₂. Consequently, it is clarified that reduction of flame stability in CO₂/O₂ combustion is mainly due to the larger heat capacity of CO₂ gas.     

CFD modelling of air-fired and oxy-fuel combustion of lignite in a 100 KW furnace

In this paper, a comprehensive computational fluid dynamics (CFD) modelling study was undertaken by integrating the combustion of pulverized dry lignite in several combustion environments. Four different cases were investigated: an air-fired and three different oxy-fuel combustion environments (25 vol.% O₂ concentration (OF25), 27 vol.% O₂ concentration (OF27), and 29 vol.% O₂ concentration (OF29) were considered. The chemical reactions (devolatilization and char burnout), convective and radiative heat transfer, fluid and particle flow fields (homogenous and heterogenous processes), and turbulent models were employed in 3-D hybrid unstructured grid CFD simulations. The available experimental results from a lab-scale 100 KW firing lignite unit (Chalmer’s furnace) were selected for the validation of these simulations. The aerodynamic effect of primary and secondary registers of the burner was included through swirl at the burner inlet in order to achieve the flame stability inside the furnace. Validation and comparison of all the combustion cases with the experimental data were made by using the temperature distribution profiles and species concentration (O₂, CO₂, and H₂O) profiles at the most intense combustion locations of the furnace. The overall visualization of the flame temperature distributions and oxygen concentrations were presented in the upper part of the furnace. The numerical results showed that the flame temperature distributions and O₂ consumptions of the OF25 case were approximately similar to the reference combustion case. In contrast, in the OF27 and OF29 combustion cases, the flame temperatures were higher and more confined in the closest region of the burner exit plane. This was a result of the quick consumption of oxygen that led to improve the ignition conditions in the latter combustion cases. Therefore, it is concluded that the resident time, stoichiometry, and recycled flue gas rates are relevant parameters to optimize the design of oxy-fuel furnaces. The findings showed reasonable agreement with the qualitative and quantitative measurements of temperature distribution profiles and species concentration profiles at the most intense combustion locations inside the furnace. These numerical results can provide useful information towards future modelling of the behaviour of pulverized brown coal in a large-scale oxy-fuel furnace/boiler in order to optimize the burner’s and combustor’s design.     

Development of an oxycoal swirl burner operating at low O2 concentrations

This work is to clarify the underlying mechanisms of burning pulverised coal in a mixture of CO₂/O₂. The performance of two different burner designs, single central orifice-type (SCO) and single annular orifice-type (SAO), under oxycoal conditions was examined in a down-fired test facility. Based on detailed in-flame measurements, combined with numerical simulations, the main parameters influencing the stability of a CO₂/O₂ pulverised coal swirl flame were investigated. The oxycoal flame was stabilised at the burner quarl by: increasing the O₂ concentration above 34 vol% without changes to the air-firing burner design and by modifications of the burner geometry thus changing its aerodynamics. The modification of the burner allowed a decrease of the O₂ concentrations to 23 vol% for SCO burner and to less than 21 vol% for SAO burner. Comprehensive measurement data for axial and tangential velocity, flue gas temperature and oxygen concentration for stable oxy-firing at 21 vol% O₂ is presented. The results reported can be used as a guideline for a development of an industrial swirl burner capable of stable operation in both regimes, namely: air and oxycoal.     

Properties of char particles obtained under O2/N2 and O2/CO2 combustion environments

Pulverized coal combustion in O₂/N₂ and O₂/CO₂ environments was investigated with a drop tube furnace. Results present that the reaction rate and burn-out degree of O₂/CO₂ chars (obtained in O₂/CO₂ environments) are lower than that of O₂/N₂ chars (obtained in O₂/N₂ environments) under the same experimental condition. It indicates that a higher O₂ concentration in O₂/CO₂ environment is needed to achieve the similar combustion characteristic to that in O₂/N₂ environment. The main differences between O₂/N₂ and O₂/CO₂ chars rely on the pore structure determined by N₂ adsorption and chemical structure measured by FT-IR. For O₂/CO₂ char, the surface is thick and the pores are compact which contribute to the fragmentation reduction of particles burning in O₂/CO₂ environment. The organic functional group elimination rate from the surface of O₂/CO₂ chars is slower or delayed. The present research results might have important implications for further understanding the intrinsic kinetics of pulverized coal combustion in O₂/CO₂ environment.     

Factors affecting coal particle ignition under oxyfuel combustion atmospheres

A set of 13 coals of different rank has been tested for ignition propensity in a 20-L explosion chamber simulating oxyfuel combustion gas conditions. Their char residues were also analysed thermogravimetrically. The effects of coal type, coal concentration (from 100 to 600 g/m³), O₂ in CO₂ atmospheres (up to 40% v/v) and particle size were investigated.The higher rank coals were significantly more difficult to ignite and mostly required higher energy chemical igniters (1000 or 2500 J) whereas the lower rank coals could be ignited with a 500 J igniter even at low coal dust concentrations.The minimum explosibility limit/ignition concentration in air varied slightly around a value of 200 g/m³, a little higher for low volatile coals and a little lower for high volatile coals.The ignition limit changed significantly, however, with O₂ concentration in CO₂, where coals required more oxygen to ignite. Most coals failed to ignite at all in 21% v/v O₂ in CO₂, but an increase to 30 or 35% v/v O₂ gave ignition patterns similar to those in air. In addition, the minimum ignition concentration decreased with increase in O₂. However, a further increase to 40% v/v O₂ did not generally affect the minimum ignition concentration.Particle size had a non-linear effect on coal ignition. The fine particles (<53 μm) behaved almost identical to the whole coal. However, the larger size fraction (>53 μm) was generally more difficult to ignite and exhibited a much lower weight loss.