The efficiency of methanol conversion to CO2 on thin films of Pt and PtRu fuel cell catalysts

Yields were determined for the CO₂ produced upon the electrochemical oxidation of 1.0 M methanol in 0.1 M HClO₄ at the following four fuel cell catalyst systems: Pt black, Pt at 10 wt.% metal loading on Vulcan XC-72R carbon (C/Pt, 10%), PtRu black at 50 at.% Pt, 50 at.% Ru (PtRu (50:50) black), and PtRu at 30 wt.% Pt, 15 wt.% Ru loading on Vulcan XC-72R carbon (C/PtRu, 30 wt.% Pt, 15 wt.% Ru). Samples were electrolyzed in a small volume (50 μl) arrangement for a period of 180 s keeping the reactant depletion in the cell below 1%. The dissolved CO₂ produced was determined ex situ by infrared spectroscopy in a micro-volume transmission flow cell. For the PtRu materials, the efficiencies for CO₂ formation were near 100% at reaction potentials in the range between 0.4 V (versus the reversible hydrogen electrode (RHE), V_RHE ) and 0.9 V_RHE. At the Pt catalysts, the yields of CO₂ approached 80% between 0.8 and 1.1 V_RHE and declined rapidly below 0.8 V_RHE.     

Preparation of supported PtRu/C electrocatalyst for direct methanol fuel cells

In this work, high-surface supported PtRu/C were prepared with Ru(NO)(NO₃)₃ and [Pt(H₂NCH₂CH₂NH₂)₂]Cl₂ as the precursors and hydrogen as a reducing agent. XRD and TEM analyses showed that the PtRu/C catalysts with different loadings possessed small and homogeneous metal particles. Even at high metal loading (40 wt.% Pt, 20 wt.% Ru) the mean metal particle size is less than 4 nm. Meanwhile, the calculated Pt crystalline lattice parameter and Pt (2 2 0) peak position indicated that the geometric structure of Pt was modified by Ru atoms. Among the prepared catalysts, the lattice parameter of 40-20 wt.% PtRu/C contract most. Cyclic voltammetry (CV), chronoamperometry (CA), CO stripping and single direct methanol fuel cell tests jointly suggested that the 40-20 wt.% PtRu/C catalyst has the highest electrochemical activity for methanol oxidation.     

Electrodeposition of Pt-Ru nanoparticles on fibrous carbon substrates in the presence of nonionic surfactant: Application for methanol oxidation

Liquid crystalline and micellar aqueous solutions of the nonionic surfactant Triton X-100 were used to direct the electrodeposition of Pt-Ru nanoparticles onto graphite felts, which were investigated as novel anodes for the direct methanol fuel cell. The effects of surfactant concentration, current density and deposition time in the preparation of these three-dimensional electrodes were studied in a factorial experiment and the electrodes were characterized by SEM and ICP-AES. Cyclic voltammetry, chronoamperometry and chronopotentiometry were carried out to assess the activity of the catalyzed felts for methanol oxidation. The presence of Triton X-100 (40-60 wt.%) coupled with an acidic plating solution were essential for the efficient co-electrodeposition of Ru in the presence of Pt to yield approximately a 1:1 Pt:Ru atomic ratio in the deposit. The highest mass specific activity, 24 A g⁻¹ at 298 K (determined by chronoamperometry after 180 s at 0 V versus Hg/Hg₂SO₄, K₂SO_4std), was obtained for the Pt-Ru electrodeposited in the presence of 40 wt.% Triton X-100 at 60 A m⁻², 298 K for 90 min. Surfactant mediated electrodeposition is a promising method for meso-scale (ca. 10-60 nm diameter) catalyst particle preparation on three-dimensional electrodes.     

Simultaneous catalytic esterification of carboxylic acids and acetalisation of aldehydes in a fast pyrolysis bio-oil from mallee biomass

This paper reports the simultaneous catalytic esterification and acetalisation of a bio-oil with methanol using a commercial Amberlyst-70 catalyst at temperatures between 70 and 170 °C. The bio-oil was prepared from the pyrolysis of mallee woody biomass in a fluidised-bed pyrolysis reactor under the fast heating rate conditions. Our results show that the conversion of light organic acids and aldehydes to esters and acetals rises significantly with increasing temperature, reaction time and catalysts loading. However, some acetals (e.g. dimethoxymethane) could decompose at higher operating temperatures (>110 °C) and catalyst loadings (>6 wt.%). The medium and heavy fractions of bio-oil also reacted with methanol to result in increases in their volatility (or decreases in boiling points) when their reactive O-containing functional groups were stabilised. The acid-catalysed reactions between bio-oil and methanol also decreased the coking propensity of the bio-oil reaction products.     

Biomass to hydrogen via catalytic steam reforming of bio-oil over Ni-supported alumina catalysts

Production of hydrogen (H₂) from catalytic steam reforming of bio-oil was investigated in a fixed bed tubular flow reactor over nickel/alumina (Ni/Al₂O₃) supported catalysts at different conditions. The features of the steam reforming of bio-oil, including the effects of metal content, reaction temperature, W_bHSV (defined as the mass flow rate of bio-oil per mass of catalyst) and S/C ratio (the molar ratio of steam to carbon fed) on the hydrogen yield were investigated. Carbon conversion (moles of carbon in the outlet gases to moles of the carbon feed) was also studied, and the outlet gas distributions were obtained. It was revealed that the Al₂O₃ with 14.1% Ni content gave the highest yield of hydrogen (73%) among the catalysts tested, and the best carbon conversion was 79% under the steam reforming conditions of S/C = 5, W_bHSV = 13 1/h and temperature = 950 °C. The H₂ yield increased with increasing temperature and decreasing W_bHSV; whereas the effect of the S/C ratio was less pronounced. In the S/C ratio range of 1 to 2, the hydrogen yield was slightly increased, but when the S/C ratio was increased further, it did not have an effect on the H₂ production yield.     

Electrochemical reduction of high pressure CO2 at a Cu electrode in cold methanol

The electrochemical reduction of high pressure CO₂ with a Cu electrode in cold methanol was investigated. A high pressure stainless steel vessel, with a divided H-type glass cell, was employed. The main products from CO₂ by the electrochemical reduction were methane, ethylene, carbon monoxide and formic acid. In the electrolysis of high pressure CO₂ at low temperature, the reduction products were formed in the order of carbon monoxide, methane, formic acid and ethylene. The best current efficiency of methane was of 20% at −3.0 V. The maximum partial current density for CO₂ reduction was approximately 15 mA cm⁻². The partial current density ratio of CO₂ reduction and hydrogen evolution, i(CO₂)/i(H₂), was more than 2.6 at potentials more positive than −3.0 V. This work can contribute to the large-scale manufacturing of fuel gases from readily available and inexpensive raw materials, CO₂-saturated methanol from industrial absorbers (the Rectisol process).     

Reduction of high content of free fatty acid in sludge palm oil via acid catalyst for biodiesel production

In this study, sulphuric acid (H₂SO₄) was used in the pretreatment of sludge palm oil for biodiesel production by an esterification process, followed by the basic catalyzed transesterification process. The purpose of the pretreatment process was to reduce the free fatty acids (FFA) content from high content FFA (> 23%) of sludge palm oil (SPO) to a minimum level for biodiesel production (> 2%). An acid catalyzed esterification process was carried out to evaluate the low content of FFA in the treated SPO with the effects of other parameters such as molar ratio of methanol to SPO (6:1-14:1), temperature (40-80 °C), reaction time (30-120 min) and stirrer speed (200-800 rpm). The results showed that the FFA of SPO was reduced from 23.2% to less than 2% FFA using 0.75% wt/wt of sulphuric acid with the molar ratio of methanol to oil of 8:1 for 60 min reaction time at 60 °C. The results on the transesterification with esterified SPO showed that the yield (ester) of biodiesel was 83.72% with the process conditions of molar ratio of methanol to SPO 10:1, reaction temperature 60 °C, reaction time 60 min, stirrer speed 400 rpm and KOH 1% (wt/wt). The biodiesel produced from the SPO was favorable as compared to the EN 14214 and ASTM D 6751 standard.     

Kinetics of methyl ester production from mixed crude palm oil by using acid-alkali catalyst

The production of biodiesel from high free fatty acid mixed crude palm oil using a two-stage process was investigated. The kinetics of the reactions was determined in a batch reactor at various reaction temperatures. It was found that the optimum conditions for reducing high free fatty acid (FFA) in MCPO (8-12 wt.%/wt oil) using esterification was a 10:1 molar ratio of methanol to FFA and using 10 wt.%/wt of sulfuric acid (based on FFA) as catalyst. The subsequent transesterification reaction to convert triglycerides to the methyl ester was found to be optimal using 6:1 molar ratio of methanol to the triglyceride (TG) in MCPO and using 0.6 wt.%/vol_TG sodium hydroxide as catalyst. Both reactions were carried out in a stirred batch reactor over a period of 20 min at 55, 60 and 65 °C. The concentration of compounds in each sample was analyzed by Thin Layer Chromatography/Flame Ionization Detector (TLC/FID), Karl Fischer, and titration techniques. The results were used for calculating the rate coefficients by using the curve-fitting tool of MATLAB. Optimal reaction rate coefficients for the forward and reverse esterification reactions of FFA were 1.340 and 0.682 l mol⁻¹ min⁻¹, respectively. The corresponding optimal transesterification, rate coefficients for the forward reactions of TG, diglyceride (DG), and monoglyceride (MG) of transesterification were 2.600, 1.186, and 2.303 l mol⁻¹ min⁻¹, and for the reverse reactions were 0.248, 0.227, and 0.022 l mol⁻¹ min⁻¹, respectively.     

Effect of the structure of Pt-Ru/C particles on COad monolayer vibrational properties and electrooxidation kinetics

In this paper, we combined FTIR spectroscopy and CO_ad stripping voltammetry to investigate CO_ad adsorption and electrooxidation on Pt-Ru/C nanoparticles. The Pt:Ru elemental composition and the metal loading were determined by ICP-AES. The X-ray diffraction patterns of the Pt-Ru/C indicated formation of a Pt-Ru (fcc) alloy. HREM images revealed an increase in the fraction of agglomerated Pt-Ru/C particles with increasing the metal loading and showed that agglomerated Pt-Ru/C nanoparticles present structural defects such as twins or grain boundaries. In addition, isolated Pt-Ru/C nanoparticles have similar mean particle size (ca. 2.5 nm) and particle size distributions whatever the metal loading. Therefore, we could determine precisely the effect of particle agglomeration on the CO_ad vibrational properties and electrooxidation kinetics. FTIR measurements revealed a main CO_ad stretching band at ca. , which we ascribed to a-top CO_ad on Pt domains electronically modified by the presence of Ru. As the metal loading increased, the position of this band was blue shifted by ca. 5 cm⁻¹ and a shoulder around 2005 cm⁻¹ developed, which was ascribed to a-top CO_ad on Ru domains. The reason for this was suggested to be the increasing size of Ru domains on agglomerated Pt-Ru/C particles, which lifts dipole-dipole coupling and allows two vibrational features to be observed (CO_ad/Ru, CO_ad/Pt). This is evidence that FTIR spectroscopy can be used to probe small chemical fluctuations of the Pt-Ru/C surface. Finally, we comment on the CO_ad electrooxidation kinetics. We observed that CO_ad was converted more easily into CO₂ as the metal loading, i.e. the fraction of agglomerated Pt-Ru/C nanoparticles, increased.     

A hybrid feedstock for a very efficient preparation of biodiesel

Biodiesel has been synthesized from karanja, mahua and hybrid {karanja and mahua (50:50 v/v)} feedstocks. A high yield in the range of 95-97% was obtained with all the three feedstocks. Conversion of vegetable oil to fatty acid methyl esters was found to be 98.6%, 95.71% and 94% for karanja, mahua and hybrid feedstocks respectively. The optimized reaction parameters were found to be 6:1 (methanol to oil) molar ratio, H₂SO₄ (1.5% v/v), at 55 ± 0.5 °C for 1 h during acid esterification for the three feedstocks. During alkaline transesterification, a molar ratio of 8:1 (methanol to oil), 0.8 wt.% KOH (wt/wt) at 55 ± 0.5 °C for 1 h was found to be optimum to achieve high yield for karanja oil. For mahua oil and the hybrid feedstock, 6:1 (methanol to oil) molar ratio, 0.75 (w/w) KOH at 55 ± 0.5 °C for 1 h was optimum for alkaline transesterification to obtain a high yield. High yield and conversion from hybrid feedstock during transesterification reaction was an indication that the reaction was not selective for any particular oil. ¹H NMR has been used for the determination of conversion of the feedstock to biodiesel.     

Thermochemical liquefaction characteristics of microalgae in sub- and supercritical ethanol

Thermochemical liquefaction characteristics of Spirulina, a kind of high-protein microalgae, were investigated with the sub- and supercritical ethanol as solvent in a 1000 mL autoclave. The influences of various liquefaction parameters on the yields of products (bio-oil and residue) from the liquefaction of Spirulina were studied, such as the reaction temperature (T), the S/L ratio (R₁, solid: Spirulina, liquid: ethanol), the solvent filling ratio (R₂) and the type and dosage of catalyst. Without catalyst, the bio-oil yields were in the range of 35.4 wt.% and 45.3 wt.% depending on the changes of T, R₁ and R₂. And the bio-oil yields increased generally with increasing T and R₂, while the bio-oil yields reduced with increasing R₁. The FeS catalyst was certified to be an ideal catalyst for the liquefaction of Spirulina microalgae for its advantages on promoting bio-oil production and suppressing the formation of residue. The optimal dosage of catalyst (FeS) was ranging from 5-7 wt.%. The elemental analyses and FT-IR and GC-MS measurements for the bio-oils revealed that the liquid products have much higher heating values than the crude Spirulina sample and fatty acid ethyl ester compounds were dominant in the bio-oils, irrespective of whether catalyst was used.     

Ruthenium promotion of Co/SBA-15 catalysts with high cobalt loading for Fischer–Tropsch synthesis

30 wt.%Co/SBA-15 catalysts with different ruthenium contents (0.05–0.5 wt.%) were prepared by incipient wetness impregnation and characterized by diffuse reflectance infrared fourier transform spectroscopy, N₂ adsorption-desorption, X-ray diffractometry, temperature-programmed reduction and H₂ desorption, oxygen titration as well as X-ray photoelectron spectroscopy. The addition of a small amount of Ru promoter to Co/SBA-15 shifted the reduction temperature of both steps (Co₃O₄ → CoO and CoO → Co⁰) to lower temperatures and suppressed the formation of Co²⁺ species. After reduction, ruthenium atoms were encapsulated partially with cobalt cluster. There was no strong electronic interaction between metal cobalt and ruthenium, however, hydrogen spillover from ruthenium to cobalt oxide clusters occurred. With increasing ruthenium content, catalyst reducibility increased and the surface was enriched in cobalt atoms. Moreover, the peak intensities of both the linear and bridge types CO adsorption increased with the increase of ruthenium content, enhancing the catalytic activity on Fischer–Tropsch synthesis.     

Transesterification of palm oil and esterification of palm fatty acid in near- and super-critical methanol with SO4-ZrO2 catalysts

Sulfated zirconia (SO₄-ZrO₂) catalysts, prepared with three different sulfur loading contents (0.75%, 1.8% and 2.5%) at two calcination temperatures (500 °C and 700 °C), were tested for use in the transesterification of purified palm oil (PPO) and the esterification of palm fatty acid (PFA) in near-critical and super-critical methanol. Techniques including BET, XRD, NH₃- and CO₂-TPD revealed that the sulfur content and calcination temperature strongly affects the catalyst base-acid site, specific surface area, average pore size, phase structure, and thus the catalytic reactivity. The most suitable sulfur loading content was found to be 1.8% and the optimum calcination temperature 500 °C. The results show that the use of SO₄-ZrO₂ reduces esterification reaction times, the amount of methanol necessary and the required reaction temperature. The reactions at 250 °C in the presence of the SO₄-ZrO₂ catalyst at 0.5 w/w% catalyst to PPO or PFA were found to give the highest FAMEs conversions. Under these conditions, 90% and 75% conversions were achieved within 10 and 1 min from PPO (at 25:1 MeOH:PPO molar ratio) and PFA (at 6:1 MeOH:PFA molar ratio), respectively.     

A comparative study on the effect of promoter content of hydrodesulfurization catalysts at different evaluation scales

CoMo and NiMo supported Al₂O₃ catalysts have been investigated for hydrotreating of model molecule as well as industrial feedstock. Activity studies were carried out for thiophene and SRGO hydrodesulfurization (HDS) in an atmospheric pressure and batch reactor respectively. These activities on sulfided catalysts were evaluated as a function of promoter content [M/(M + Mo) = 0.30, 0.34, 0.39; M = Co or Ni] using fixed (ca. 8 wt.%) molybdenum content. The promoted catalysts were characterized by textural properties, XRD, and temperature programmed reduction (TPR). TPR spectra of the Co and Ni promoter catalysts showed that Ni promotes the easy reduction of Mo species compared with Co. With the variation of promoter content NiMo catalyst was found to be superior to CoMo catalyst for gas oil HDS, while at low-promoter content the opposite trend was observed for HDS of thiophene. The behavior was attributed to the several reaction mechanisms involved for gas oil HDS. A nice relationship was obtained for hydrodesulfurized gas oil refractive index (RI) and aromatic content, which corresponds to the Ni hydrogenation property.     

Production of ethyl ester from crude palm oil by two-step reaction with a microwave system

The production of ethyl esters of fatty acids from a feed material of crude palm oil (CPO) with a high free fatty acid (FFA) content under microwave assistance has been investigated. Parametric studies have been carried out to investigate the optimum conditions for the esterification process (amount of ethanol, amount of catalyst, reaction time, and microwave power). As a result, a molar ratio of FFA to ethanol of 1:24 with 4% wt./wt. of H₂SO₄/FFA, a microwave power of 70 W, and a reaction time of 60 min have been identified as optimum reaction parameters for the esterification process aided by microwave heating. At the end of the esterification process, the amount of FFA had been reduced from 7.5 wt.% to less than 2 wt.%. Similar results were obtained following conventional heating at 70 °C, but only after a reaction time of 240 min. Transesterification of the esterified palm oil has been accomplished with a molar ratio of CPO to ethanol of 1:4, 1.5 wt.% KOH as a catalyst, a microwave power of 70 W, and a reaction time of 5 min. This two-step esterification and transesterification process provided a yield of 80 wt.% with an ester content of 97.4 wt.%. The final ethyl ester product met with the specifications stipulated by ASTM D6751-02.     

Effect of reduction conditions on electrocatalytic activity of a ternary PtNiCr/C catalyst for methanol electro-oxidation

The effect of reduction conditions on a Pt₂₈Ni₃₆Cr₃₆/C catalyst was investigated by using two different reduction methods: hydrogen reduction and NaBH₄ reduction. In hydrogen reduced catalysts, dissolution of metallic Ni and Cr was observed during cyclic voltammetry (CV) tests, and a larger amount of Ni and Cr was dissolved when reduced at higher temperatures. For methanol electro-oxidation, the highest specific current density of 1.70 A m⁻² at 600 s of the chronoamperometry tests was observed in the catalyst reduced at 300 °C, which was ∼24 times that of a Pt/C catalyst (0.0685 A m⁻²). In NaBH₄ reduced catalysts, formation of an amorphous phase and a more Pt-rich surface was observed in X-ray diffraction and CV results, respectively, with increasing amounts of NaBH₄. When reduced by 50 times of the stoichiometric amount of NaBH₄, the PtNiCr/C catalyst (PtNiCr-50t) showed a current density of 34.1 A g_{noble metal}⁻¹, which was 81% higher than the 18.8 A g_{noble metal}⁻¹ value of a PtRu/C catalyst at 600 s of the chronoamperometry tests. After 13 h of chronoamperometry testing, the activity of the PtNiCr-50t (15.0 A g_{noble metal}⁻¹) was 110% higher than the PtRu/C catalyst (7.15 A g_{noble metal}⁻¹). The PtNiCr/C catalyst shows promise as a Ru-free methanol oxidation catalyst.     

Hydrogen production via gasification of meat and bone meal in two-stage fixed bed reactor system

Gasification of meat and bone meal followed by thermal cracking of tar was carried out at atmospheric pressure using a two-stage fixed bed reaction system in series. The first stage was used for the gasification and the second stage was used for thermal cracking of tar. In this work, the effects of temperature (650-850 °C) of both stages, equivalence ratio (actual O₂ supply/stoichiometric O₂ required for complete combustion) (0.15-0.3) and the second stage packed bed height (40-100 mm) on the product (char, tar and gas) yield and gas (H₂, CO, CO₂, CH₄, C₂H₄, C₂H₆, C₃H₆, C₃H₈) composition were studied. It was observed that the two-stage process increased hydrogen production from 7.3 to 22.3 vol.% (N₂ free basis) and gas yield from 30.8 to 54.6 wt.% compared to single stage. Temperature and equivalence ratio had significant effects on the hydrogen production and product distribution. It was observed that higher gasification (850 °C) and cracking (850 °C) reaction temperatures were favorable for higher gas yield of 52.2 wt.% at packed bed height of 60 mm and equivalence ratio of 0.2. The residence time of tar and product gases was varied by varying the packed bed height of second stage. The tar yield decreased from 18.6 wt.% to 14.2 wt.% and that of gas increased from 50.6 wt.% to 54.6 wt.% by changing the packed bed height of second stage from 40 to 100 mm while the gross heating value (GHV) of the product gas remained almost constant (16.2-16.5 MJ/m³).     

CO oxidation and CO2 reduction on carbon supported PtWO3 catalyst

The activity of a carbon supported PtWO₃ (PtWO₃/C) catalyst in the CO oxidation and CO₂ reduction reactions was evaluated in sulfuric acid solution at room temperature.Cyclic voltammetry combined with on-line mass spectrometry shows that the oxidation of both saturated CO adlayer and dissolved CO on PtWO₃/C material commences at rather low potentials, ca. 0.18 and 0.12 V vs. RHE, respectively. However, the low-potential process seems to involve only a minor fraction of the CO adlayer, the major part of the adsorbed CO layer being oxidised at the potentials as high as those for pure Pt catalysts—ca. 0.7 V vs. RHE. PtWO₃/C material was found to reversibly de-activate upon a prolonged exposure to the CO-saturated solution due to the inhibition of the hydrogen tungsten bronze formation.The reduction of CO₂ on PtWO₃/C leads to the formation of an adsorbate - presumably CO - on the Pt sites of the catalyst. Although the rate of the adsorbate build-up on PtWO₃/C at 0.1 V is lower than that on pure Pt/C, our results indicate that upon a prolonged exposure of the PtWO₃/C electrode to a CO₂-saturated solution a complete poisoning of the Pt sites with the adsorbate is likely to occur at room temperature.     

Hydrogen production via catalytic steam reforming of fast pyrolysis bio-oil in a two-stage fixed bed reactor system

Hydrogen production was prepared via catalytic steam reforming of fast pyrolysis bio-oil in a two-stage fixed bed reactor system. Low-cost catalyst dolomite was chosen for the primary steam reforming of bio-oil in consideration of the unavoidable deactivation caused by direct contact of metal catalyst and bio-oil itself. Nickel-based catalyst Ni/MgO was used in the second stage to increase the purity and the yield of desirable gas product further. Influential parameters such as temperature, steam to carbon ratio (S/C, S/CH₄), and material space velocity (W_BHSV, GHSV) both for the first and the second reaction stages on gas product yield, carbon selectivity of gas product, CH₄ conversion as well as purity of desirable gas product were investigated. High temperature (> 850 °C) and high S/C (> 12) are necessary for efficient conversion of bio-oil to desirable gas product in the first steam reforming stage. Low W_BHSV favors the increase of any gas product yield at any selected temperature and the overall conversion of bio-oil to gas product increases accordingly. Nickel-based catalyst Ni/MgO is effective in purification stage and 100% conversion of CH₄ can be obtained under the conditions of S/CH₄ no less than 2 and temperature no less than 800 °C. Low GHSV favors the CH₄ conversion and the maximum CH₄ conversion 100%, desirable gas product purity 100%, and potential hydrogen yield 81.1% can be obtained at 800 °C provided that GHSV is no more than 3600 h^− 1. Carbon deposition behaviors in one-stage reactor prove that the steam reforming of crude bio-oil in a two-stage fixed bed reaction system is necessary and significant.     

Catalytic test of supported Ni catalysts with core/shell structure for dry reforming of methane

Supported nickel catalysts with core/shell structures of Ni/Al₂O₃ and Ni/MgO-Al₂O₃ were synthesized under multi-bubble sonoluminescence (MBSL) conditions and tested for dry reforming of methane (DRM) to produce hydrogen and carbon monoxide. A supported Ni catalyst made of 10% Ni loading on Al₂O₃ and MgO-Al₂O₃, which performed best in the steam reforming of methane (97% methane conversion at 750 °C) and in the partial oxidation of methane (96% methane conversion at 800 °C), showed also good performance in DRM and excellent thermal stability for the first 150 h. The supported Ni catalysts Ni/Al₂O₃ and Ni/MgO-Al₂O₃ yielded methane conversions of 92% and 92.5%, respectively and CO₂ conversions of 95.0% and 91.8%, respectively, at a reaction temperature of 800 °C with a molar ratio of CH₄/CO₂ = 1. Those were near thermodynamic equilibrium values.