A novel electrospun silk fibroin/hydroxyapatite hybrid nanofibers

A novel electrospinning of silk fibroin/hydroxyapatite hybrid nanofibers with different composition ratios was performed with methanoic acid as a spinning solvent. The silk fibroin/hydroxyapatite hybrids containing up to 30% hydroxyapatite nanoparticles could be electrospun into the continuous fibrous structure. The electrospun silk fibroin/hydroxyapatite hybrid nanofibers showed bigger diameter and wider diameter distribution than pure silk fibroin nanofibers, and the average diameter gradually increased from 95 to 582 nm. At the same time, the secondary structure of silk fibroin/hydroxyapatite nanofibers was characterized by X-ray diffraction, Fourier transform infrared analysis, and DSC measurement. Comparing with the pure silk fibroin nanofibers, the crystal structure of silk fibroin was mainly amorphous structure in the hybrid nanofibers. X-ray diffraction results demonstrated the hydroxyapatite crystalline nature remained as evidenced from the diffraction planes (002), (211), (300), and (202) of the hydroxyapatite crystallites, which was also confirmed by Fourier transform infrared analysis. The thermal behavior of hybrid nanofibers exhibited the endothermic peak of moisture evaporation ranging from 86 to 113 °C, and the degradation peak at 286 °C appeared. The SF/HAp nanofibers mats containing 30% HAp nanoparticles showed higher breaking tenacity and extension at break for 1.1688 ± 0.0398 MPa and 6.55 ± 1.95%, respectively. Therefore, the electrospun silk fibroin/hydroxyapatite hybrid nanofibers should be provided potentially useful options for the fabrication of biomaterial scaffolds for bone tissue engineering.     

Covalent binding of placental derived proteins to silk fibroin improves schwann cell adhesion and proliferation

Schwann cells play a key role in peripheral nerve regeneration. Failure in sufficient formation of Büngner bands due to impaired Schwann cell proliferation has significant effects on the functional outcome after regeneration. Therefore, the growth substrate for Schwann cells should be considered with highest priority in any peripheral nerve tissue engineering approach. Due to its excellent biocompatibility silk fibroin has most recently attracted considerable interest as a biomaterial for use as conduit material in peripheral nerve regeneration. In this study we established a protocol to covalently bind collagen and laminin, which have been isolated from human placenta, to silk fibroin utilizing carbodiimide chemistry. Altered adhesion, viability and proliferation of Schwann cells were evaluated. A cell adhesion assay revealed that the functionalization with both, laminin or collagen, significantly improved Schwann cell adhesion to silk fibroin. Moreover laminin drastically accelerated adhesion. Schwann cell proliferation and viability assessed with BrdU and MTT assay, respectively, were significantly increased in the laminin-functionalized groups. The results suggest beneficial effects of laminin on both, cell adhesion as well as proliferative behaviour of Schwann cells. To conclude, the covalent tailoring of silk fibroin drastically enhances its properties as a cell substratum for Schwann cells, which might help to overcome current hurdles bridging long distance gaps in peripheral nerve injuries with the use of silk-based nerve guidance conduits.     

Bacterial cellulose nanocrystals-embedded silk nanofibers

Nanofibrous Bacterial cellulose nanocrystals (BCNs)-embedded silk fibroin were successfully fabricated using electrospinning. The morphology, structure and mechanical properties of the silk fibroin nanofibers were investigated at various BCNs concentrations from 0 to 7 wt%. SEM, TEM and XRD analyses were conducted to confirm the incorporation of the BCNs in the electrospun silk fibroin nanofibers. The average diameter of the silk fibroin/BCNs nanofibers increased from 230 to 430 nm according to the increasing of the BCNs ratio due to the rising solute content. The FT-IR spectra confirmed the conformational transition of the silk fibroin, from a random coil to a beta-sheet structure, which shows the enhanced mechanical properties of silk fibroin based nanofibers even with small amounts of the BCNs. Moreover, it was observed that the Young's modulus of the silk fibroin/BCNs nanofibers unexpectedly increased with the formation of BCNs with a percolation structure at a concentration between 3 and 5 wt%.     

Injectable silk/hydroxyapatite nanocomposite hydrogels with vascularization capacity for bone regeneration

Localized and sustained osteogenic-angiogenic stimulation to bone defects is critical for effective bone repair.Here,desferrioxamine(DFO)was loaded on silk fibroin nanofibers and blended with hydroxyapatite nanorods(HA),forming injectable DFO-loaded silk fibroin-HA nanocomposite hydrogels.The composite hydrogels remained homogeneous distribution of HA with high ratio(60%)and also higher stiffness than that of pure silk fibroin nanofiber hydrogels,which provided stable osteogenic stimulation niches for tissue regeneration.Without the scarify of injectability,the hydrogels achieved slow delivery of DFO for above 60 days,resulting in suitable angiogenesis in vitro and in vivo and better osteogenesis than DFO-free systems.Compared to previous injectable silk fibroin-HA hydrogels,the introduction of vascularization capacity further stimulated the osteogenic differentiation of stem cells and accelerated new bone formation.Quicker and better bone healing were detected at defect sites after the injection of DFO-loaded nanocomposite hydrogels,indicating the effective synergistic effect of osteogenic and angiogenic cues.This work provides a simple and effective strategy of introducing angiogenic cues to bone matrices.We believe that the injectable nanocomposite hydrogels are suitable for the regeneration of bone tissues.     

Tissue response and biodegradation of composite scaffolds prepared from Thai silk fibroin,gelatin and hydroxyapatite

This work aimed to investigate tissue responses and biodegradation, both in vitro and in vivo, of four types of Bombyx mori Thai silk fibroin based-scaffolds. Thai silk fibroin (SF), conjugated gelatin/Thai silk fibroin (CGSF), hydroxyapatite/Thai silk fibroin (SF4), and hydroxyapatite/conjugated gelatin/Thai silk fibroin (CGSF4) scaffolds were fabricated using salt-porogen leaching, dehydrothermal/chemical crosslinking and an alternate soaking technique for mineralization. In vitro biodegradation in collagenase showed that CGSF scaffolds had the slowest biodegradability, due to the double crosslinking by dehydrothermal and chemical treatments. The hydroxyapatite deposited from alternate soaking separated from the surface of the protein scaffolds when immersed in collagenase. From in vivo biodegradation studies, all scaffolds could still be observed after 12 weeks of implantation in subcutaneous tissue of Wistar rats and also following ISO10993-6: Biological evaluation of medical devices. At 2 and 4 weeks of implantation the four types of Thai silk fibroin based-scaffolds were classified as “non-irritant” to “slight-irritant”, compared to Gelfoam^® (control samples). These natural Thai silk fibroin-based scaffolds may provide suitable biomaterials for clinical applications.     

Bovine pericardium coated with biopolymeric films as an alternative to prevent calcification: In vitro calcification and cytotoxicity results

Bovine pericardium, for cardiac valve fabrication, was coated with either chitosan or silk fibroin film. In vitro calcification tests of coated and non coated bovine pericardium were performed in simulated body fluid solution in order to investigate potential alternatives to minimize calcification on implanted heart valves. Complementary, morphology was assessed by scanning electron microscopy — SEM; X-ray diffraction (XRD) and infrared spectroscopy (FTIR-ATR) were performed for structural characterization of coatings and biocompatibility of chitosan. Silk fibroin films were assayed by in vitro cytotoxicity and endothelial cell growth tests. Bovine pericardium coated with silk fibroin or chitosan did not present calcification during in vitro calcification tests, indicating that these biopolymeric coatings do not induce bovine pericardium calcification. Chitosan and silk fibroin films were characterized as non cytotoxic and silk fibroin films presented high affinity to endothelial cells. The results indicate that bovine pericardium coated with silk fibroin is a potential candidate for cardiac valve fabrication, since the affinity of silk fibroin to endothelial cells can be explored to induce the tissue endothelization and therefore, increase valve durability by increasing their mechanical resistance and protecting them against calcification.     

丝素蛋白柔性电子器件材料的研究进展

丝素蛋白材料凭借良好的生物相容性、可控生物降解性、再生形貌多样性等已被制成柔性电子器件在电子领域进行了应用研究.本文首先综述不同溶解方法对蚕丝再生材料制备的影响,同时对丝素蛋白材料的(微球、膜、纤维、凝胶、支架等)制备方法、材料性能进行分析,最后总结了近年来丝素蛋白基柔性电子材料的应用研究进展.尽管已有研究表明可获得各...     

Large-Scale Fabrication of Robust Artificial Skins from a Biodegradable Sealant-Loaded Nanofiber Scaffold to Skin Tissue via Microfluidic Blow-Spinning

Given that many people suffer from large-area skin damage, skin regeneration is a matter of high concern. Here, an available method is developed for the formation of large-area robust skins through three stages: fabrication of a biodegradable sealant-loaded nanofiber scaffold (SNS), skin tissue reconstruction, and skin regeneration. First, a microfluidic blow-spinning strategy is proposed to fabricate a large-scale nanofiber scaffold with an area of 140 cm × 40 cm, composed of fibrinogen-loaded polycaprolactone/silk fibroin (PCL/SF) ultrafine core–shell nanofibers with mean diameter of 65 nm. Then, the SNS forms, where the gelling reaction of fibrin sealant occurs in situ between thrombin and fibrinogen on PCL/SF nanofiber surface, to promote the migration and proliferation of fibroblasts, accelerating skin regeneration. Through an in vivo study, it is shown that the SNS can rapidly repair acute tissue damage such as vascular bleeding and hepatic hemorrhage, and also promote angiogenesis, large-area abdominal wall defect repair, and wound tissue regeneration for medical problems in the world. Besides, it avoids the risk of immune rejection and secondary surgery in clinical applications. This strategy offers a facile route to regenerate large-scale robust skin, which shows great potential in abdominal wall defect repair.     

Fabrication of glycidyl methacrylate-modified silk fibroin/poly(L-lactic acid-co-ε-caprolactone)–polyethylene glycol diacrylate hybrid 3D nanofibrous scaffolds for tissue engineering

In order to provide a biomimetic natural extracellular matrix microenvironment with excellent mechanical capacity for tissue regeneration, a novel porous hybrid glycidyl methacrylate-modified silk fibroin/poly(L-lactic acid-co-ε-caprolactone)–polyethylene glycol diacrylate (SFMA/P(LLA-CL)–PEGDA) hybrid three-dimensional (3D) nanofibrous scaffolds was successfully fabricated through the combination of 3D nanofibrous platforms and divinyl PEGDA based photocrosslinking, and then further improved water resistance by ethanol vapor post-treatment. Scanning electron microscopy and micro-computed tomography results demonstrated significant PEGDA hydrogel-like matrices bonded nanofibers, which formed a 3D structure similar to that of “steel bar (nanofibers)‒cement (PEGDA)”, with proper pore size, high porosity, and high pore connectivity density. Meanwhile, the hybrid 3D nanofibrous scaffolds showed outstanding swelling properties as well as improved compressive and tensile properties. Furthermore, these hybrid 3D nanofibrous scaffolds could provide a biocompatible microenvironment, capable of inducing the material‒cell hybrid and regulating human umbilical vein endothelial cells proliferation. They thus present significant potential in tissue regeneration.     

Multi-functionalized nanofibers with reactive oxygen species scavenging capability and fibrocartilage inductivity for tendon-bone integration

The presence of excessive reactive oxygen species(ROS)after injuries to the enthesis could lead to cellular oxidative damage,high inflammatory response,chronic inflammation,and limited fibrochondral induc-tivity,making tissue repair and functional recovery difficult.Here,a multifunctional silk fibroin nanofiber modified with polydopamine and kartogenin was designed and fabricated to not only effectively reduce inflammation by scavenging ROS in the early stage of the enthesis healing but also enhance fibrocarti-lage formation with fibrochondrogenic induction in the later stages.The in vitro results confirmed the antioxidant capability and the fibrochondral inductivity of the functionalized nanofibers.In vivo studies showed that the multifunctional nanofiber can significantly improve the integration of tendon-bone and accelerate the regeneration of interface tissue,resulting in an excellent biomechanical property.Thus,the incorporation of antioxidant and bio-active molecules into extracellular matrix-like biomaterials in interface tissue engineering provides an integrative approach that facilitates damaged tissue regeneration and functional recovery,thereby improving the clinical outcome of the engineered tissue.     

Silver nanoparticles incorporated electrospun silk fibers

We present a simple and mass-producible method of incorporating silver nanoparticles on the surface of electrospun silk non-woven membranes for the fabrication of antimicrobial wound dressings. Nanofibrous silk membranes with fiber diameters of 460 +/- 40 nm were electrospun from an aqueous Bombyx mori fibroin solution. The electrospun membranes incorporating silver nanoparticles were prepared by dipping the membranes in aqueous silver nitrate (AgNO3) solution (0.5 or 1.0 wt%) followed by photoreduction. Field emission scanning and transmission electron microscopy showed that silver nanoparticles were generated on the electrospun silk fibroin nanofibers as well as inside them. The interaction between the silver nanoparticles and amide groups in the silk fibroin molecules was characterized using X-ray photoelectron spectroscopy.     

静电纺SF/PLA共混纳米纤维的形态结构及热性能

以六氟异丙醇(HFIP)为溶剂,通过静电纺丝方法纺制了不同比例的丝素蛋白/聚乳酸(SF/PLA)共混纳米纤维,并通过SEM、FT-IR、X射线衍射和TG-DTA研究了该纳米纤维非织造网的形态特征、分子结构和热性能。结果表明,纤维直径在246nm～2000nm之间,混纺纤维直径随着SF含量的增大而变粗;FT-IR和X射线衍射谱图都表明混纺纤维有着较高的结晶度,并有相分离发生;TG-DTA曲线中明显的SF和PLA分解峰,进一步证明了在本实验条件下SF与PLA的共混不能形成共溶体系,共混SF/PLA纳米纤维存在两个分离的结晶区,即SF晶区与PLA晶区。     

Fabrication of a composite vascular scaffold using electrospinning technology

Intermolecular forces and morphology demonstrated that there was an excellent compatibility between silk fibroin and gelatin. The silk fibroin/gelatin composite vascular scaffold (inner diameter 4.5 mm) was prepared successfully by electrospinning. The scaffold was treated with ethanol to enhance the water-resistant ability and biomechanical properties. After ethanol treatment, the scaffold could hardly dissolve in the water, and FTIR showed that the conformation of the treated silk fibroin/gelatin composite vascular scaffold was mainly β-sheets. The electrospun silk fibroin/gelatin vascular scaffold possessed outstanding biomechanical properties. In vitro cell culture and in vivo subcutaneous implantation demonstrated that the electrospun silk fibroin/gelatin vascular scaffold had an appropriate biocompatibility. The results indicated that the electrospun silk fibroin/gelatin composite vascular scaffold could be considered as an ideal candidate for tissue-engineered blood vessel.     

Chitosan/silk fibroin-based tissue-engineered graft seeded with adipose-derived stem cells enhances nerve regeneration in a rat model

Sciatic nerve injury presents an ongoing challenge in reconstructive surgery. Local stem cell application has recently been suggested as a possible novel therapy. In the present study we evaluated the potential of a chitosan/silk fibroin scaffold serving as a delivery vehicle for adipose-derived stem cells and as a structural framework for the injured nerve regeneration. The cell-loaded scaffolds were used to regenerate rat sciatic nerve across a 10 mm surgically-induced sciatic nerve injury. The functional nerve recovery was assessed by both walking track and histology analysis. Results showed that the reconstruction of the injured sciatic nerve had been significantly enhanced with restoration of nerve continuity and function recovery in the cell-loaded scaffold groups, and their target skeletal muscle had been extensively reinnervated. This study raises a potential possibility of using the newly developed nerve grafts as a promising alternative for nerve regeneration.     

丝素蛋白水凝胶材料在组织工程中的应用研究进展

组织工程技术是有望从根本上解决组织或器官损伤及实现功能重建的前沿技术,其关键之一是制备具有良好生物相容性和生物降解性的支架材料。水凝胶由于具有众多良好的特性,成为组织工程研究中一种优良的支架材料。丝素蛋白水凝胶由于独特的性质、多样化的成胶方式以及优异的可加工性成为了支架材料研究的热点,备受学者的青睐并涌现出了大量的研究成果。本文在阐明丝素蛋白凝胶原理的基础上,回顾了目前较为成熟的凝胶化方法,随后重点综述了丝素蛋白水凝胶在组织工程中的研究进展,最后进行了总结和展望,以期为相关领域的研究者提供参考和借鉴。     

In vitro and in vivo research on using Antheraea pernyi silk fibroin as tissue engineering tendon scaffolds

In this paper, the feasibility of using Antheraea pernyi silk fibroin as tissue engineering tendon scaffold was investigated in vitro and in vivo, respectively, utilizing tenocytes and animal model. The animal model used here was an adult New Zealand White rabbit with a 15-mm gap defect in both sides of the Achilles tendon. The Achilles tendon defects in one side of hind legs were repaired using the braided A. pernyi silk fibroin scaffold in experimental group (n = 24), while the other side left untreated as negative group (n = 24). The recovery of the defect tendons were evaluated postoperatively at the 2nd, 6th, 12th, and 16th week using macroscopic, histological, immunohistochemical, scanning electron micrograph and biomechanical test techniques. In vitro results examined by scanning electron micrograph showed that A. pernyi silk fibroin promote the adhesion and propagation of the tenocytes. In vivo, at 16 weeks after implantation, morphological results showed that neo-tendons were formed, and bundles of collagen fibers in the neo-tendons were uniform and well oriented. Immunohistochemical results showed that collagen type in the regenerated tendons was predominantly type I. The maximum load of regenerated tendon at 16 weeks reached 55.46% of the normal tendon values. Preliminary, we concluded that A. pernyi silk fibroin promoted the recovery of Achilles tendon defect of rabbit and the application of A. pernyi silk fibroin as tissue engineering tendon scaffold is feasible.     

Structurally and Functionally Optimized Silk‐Fibroin–Gelatin Scaffold Using 3D Printing to Repair Cartilage Injury In Vitro and In Vivo

Articular cartilage repair remains a great challenge for clinicians and researchers. Recently, there emerges a promising way to achieve one‐step cartilage repair in situ by combining endogenic bone marrow stem cells (BMSCs) with suitable biomaterials using a tissue engineering technique. To meet the increasing demand for cartilage tissue engineering, a structurally and functionally optimized scaffold is designed, by integrating silk fibroin with gelatin in combination with BMSC‐specific‐affinity peptide using 3D printing (3DP) technology. The combination ratio of silk fibroin and gelatin greatly balances the mechanical properties and degradation rate to match the newly formed cartilage. This dually optimized scaffold has shown superior performance for cartilage repair in a knee joint because it not only retains adequate BMSCs, due to efficient recruiting ability, and acts as a physical barrier for blood clots, but also provides a mechanical protection before neocartilage formation and a suitable 3D microenvironment for BMSC proliferation, differentiation, and extracellular matrix production. It appears to be a promising biomaterial for knee cartilage repair and is worthy of further investigation in large animal studies and preclinical applications. Beyond knee cartilage, this dually optimized scaffold may also serve as an ideal biomaterial for the regeneration of other joint cartilages.     

Electrospinning of reconstituted silk fiber from aqueous silk fibroin solution

Silk nanofibers were successfully prepared by electrospinning an aqueous solution of regenerated silk fibroin (RSF, from Bombyx mori) with higher molecular weight. Many factors, such as concentration, electrical conductivity of the fibroin solution and applied electric field were found to influence the morphology of these nanofibers. The conformation of RSF nanofibers was transformed from random coil/helical to β-sheet after the post treatment with pure ethanol. Under optimal conditions, the as-spun non-woven mats achieved good mechanical properties. The apparent stress and strain at break were 11.1 ± 0.7 MPa and 10.2 ± 1.6%, respectively, which is important for the application of such a unique fibrous protein.     

Synthesis of selenium nanoparticles in the presence of silk fibroin

This paper describes a solution-phase approach to the synthesis of selenium nanoparticles by reducing selenious acid solution with ascorbic acid in the presence of silk fibroin. The monodispersed spherical selenium colloid particles obtained were very stable in silk fibroin solution and characterized by Atomic force microscopy and X-ray techniques. The influences of temperature and ultrasonication on the morphology of selenium nanoparticles were also discussed. The experiments showed that the selenium nanoparticles with various morphologies could be obtained under different temperatures and the appropriate ultrasonication time was 60 min. This result indicated that the silk fibroin molecules intimately associated with the surface of the selenium particles and controlled the growth particles.     

静电纺丝天然-人工合成聚合物复合纳米纤维及其对细胞黏附、增殖和迁移的影响

生物材料组成成分对细胞生物功能有不同的影响。利用静电纺丝技术制备了基于聚己内酯(PCL,polycaprolactone)的不同天然蛋白、多糖(丝素蛋白(SF,silk fibroin)、透明质酸(HA,hyaluronicacid))的混合组分纳米纤维,采用了扫描电镜和接触角对纳米纤维进行基础表征。同时,进一步考察了纳米纤维作为组织工程支架的可行性。研究结果表明SF组分能增加材料的可纺性,有利于细胞的前期黏附,并能够促进细胞增殖。HA组分可以改善材料的亲水性,增加细胞伪足并促进细胞迁移。重要的是,PCL/SF/HA纳米纤维能同时结合SF和HA的优点,有望在组织工程领域得到应用。