Effects of Chitosan,Calcium Chloride,and Pullulan Coating Treatments on Antioxidant Activity in Pear cv. “Huang guan” During Storage

Effects of different calcium chloride, chitosan and pullulan coating treatments on antioxidant activity of “Huang guan” pears (Pyrus pyrifolia Nakai) during storage have been studied. Total phenolic content, phenolic composition, total flavonoid content, superoxide dismutase (SOD), peroxidase (POD) and catalase (CAT) activities, and antioxidant activity (1,1-diphenyl-2-picrylhydrazyl (DPPH), 2'-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid (ABTS), ferric reducing antioxidant potential (FRAP)) were determined in peel and pulp tissues over 210 days. Coating treatments slowed decrease of total phenolic and flavonoid contents, chlorogenic acid, arbutin, catechin and caffeic acid, SOD and CAT activities, and total antioxidant activity. However, POD activity was inhibited. The antioxidant content in the peel was higher than in the pulp. Of the coatings, chitosan was the most effective, but overall, all coatings may be useful to extend shelf-life, maintain quality and control decline of antioxidant activity in pear.     

Improvement of the Quality and the Shelf Life of Figs (<Emphasis Type="Italic">Ficus carica</Emphasis>) Using an Alginate–Chitosan Edible Film

The consumption of fresh figs (Ficus carica) has long been associated with longevity and health benefits. However, fresh figs are highly perishable. An alternative to extend the shelf life of this fruit might be the application of an edible film. Thus, in this study, fig fruits collected at two maturity stages (referred as stages III and IV) were coated with an alginate–chitosan bilayer edible (A–Ch BE) film and the main physiological and quality attributes were evaluated during storage at low temperature (6 °C) at 0, 3, 6, 9, 12, and 15 days of storage. Ethylene and CO₂ productions were considered as physiological parameters, while firmness, color changes, weight loss, and visual infection were the quality attributes evaluated. The application of the film reduced CO₂ production and increased ethylene emission, regardless of the maturity stage of the figs. Firmness for uncoated figs underwent a significant decrease during storage, exhibiting values lower than 1.0 N. On the contrary, for coated figs, firmness was not only maintained but also even increased up to 3 N, for figs of stage III, and up to 2.5 N for the more mature figs (stage IV). Furthermore, coated figs exhibited better external color retention (ΔE < 2), lower weight loss (～8 %), and also lower visual fungal contamination (<5 %) than uncoated fruits during the 15 days of storage at 6 °C, regardless the maturity stage. Therefore, the results indicate that application of an A–Ch BE film not only can improve the overall quality of figs (F. carica var. Mission) stored at 6 °C but is also able to extend their shelf life.     

Effects of Antimicrobial Edible Coating of Thymol Nanoemulsion/Quinoa Protein/Chitosan on the Safety,Sensorial Properties,and Quality of Refrigerated Strawberries (<Emphasis Type="Italic">Fragaria × ananassa</Emphasis>) Under Commercial Storage Environment

The effectiveness of the edible coating with thymol nanoemulsion on the safety, sensorial properties, and quality of refrigerated strawberries was investigated under commercial storage conditions. Spontaneous emulsification was used to obtain the thymol nanoemulsion that was included on quinoa protein/chitosan coatings. During the entire storage time, strawberries coated with thymol-antimicrobial packaging had a lower fungal and yeast load compared with the controls (uncoated and coated with quinoa protein/chitosan). The flavour and aroma of the coated strawberries was initially affected, although this sensory appreciation was improved from the fifth day of storage and showed similar scores than the controls, and presenting better aroma score at day 12 of storage. Furthermore, the shelf life of the thymol nanoemulsion-coated strawberries increased in 4 days, unlike that in the both controls. Further, the application of these biocoatings on strawberries significantly decreased the weight loss relative to that in the control, during 16 days of storage at 5 °C and 90% relative humidity, and did not alter the quality parameters (pH, titrable acidity, and percentage of soluble solids). These results suggest that the application of thymol/nanomulsion-loaded edible films is an effective strategy to increase the shelf life of highly perishable products such as strawberries.     

Aqueous chlorine dioxide treatment of horticultural produce: Effects on microbial safety and produce quality–A review

Microbial load on fresh fruit and vegetables causes decay and losses after harvest and may lead to foodborne illness in case of contamination with human pathogens on raw consumed produces. Washing with tap water only marginally reduces microorganisms attached to produce surfaces. Chlorine is widely used for decontamination on fresh horticultural produces. However, due to harmful by-products and the questionable efficacy it has become increasingly challenged. During the last 20 years, the interest to study ClO₂ treatments as an alternative sanitation agent for industrially prepared fresh produce has largely increased. For a wide range of commodities, the application of gaseous ClO₂ has meanwhile been investigated. In addition, since several years, the interest in aqueous ClO₂ treatments has further risen because of the better manageability in postharvest processing lines compared to gaseous application. This article critically evaluated the effects of postharvest application of aqueous ClO₂, either alone or in combination with other treatments, on microbial loads for various horticultural produces. In laboratory investigations, application of aqueous ClO₂ at concentrations between 3 and 100 ppm effectively reduced counts of natural or inoculated microorganisms (bacteria, yeasts, and mold) in the range of 1 and 5 log. However, various effects of ClO₂ treatments on produce quality have been described. These mainly comprise implication on sensory and visual attributes. In this context, there is increasing focus on the potential impacts of aqueous ClO₂ on relevant nutritional components of produces such as organic acids or phenolic substances.     

Mathematical Models for Prediction of Temperature Effects on Kinetic Parameters of Microorganisms’ Inactivation: Tools for Model Comparison and Adequacy in Data Fitting

Microbial inactivation often follows a sigmoidal kinetic behaviour, with an initial lag phase, followed by a maximum inactivation rate period and tending to a final asymptotic value. Mathematically, such tendencies may be described by using primary kinetic models (Gompertz based model is one example) that describe microbial survival throughout processing time when stressing conditions are applied. The parameters of kinetic models are directly affected by temperature. Despite the number of mathematical equations used to describe the dependence of the kinetic parameters on temperature (so-called secondary models), there is a lack of studies regarding model comparison and adequacy in data fitting. This work provides a review of mathematical models that describe the temperature dependence of kinetic parameters related to microbial thermal inactivation. Regression analysis schemes and tests seeking model comparison are presented. A case study is included to provide guidance for the assessment of secondary model adequacy and regression analyses procedures. When modelling temperature effects on sigmoidal inactivation kinetics of microorganisms, one should be aware about the regression methodology applied. The most adequate models according to the two-step regression methodology may not be the best selection if a global fit is applied.     

Effects of cold storage and heat–acid shocks on growth and verotoxin 2 production ofEscherichia coliO157:H7

Escherichia coliO157:H7 was cold-stored (4°C) either in nutritious menstruum [buffered Brain Heart Infusion (BHI) broth] or with starvation (buffered saline) at pH 7.0 or 5.5. Cultures grown in BHI broth at 37°C for 24h served as non-cold-stored controls. After 4-weeks cold storage, bacterial cells were shocked by heat (45°C for 5min) and acid (pH 2.5 for 30min at 37°C) and subsequently moved to optimal conditions (BHI broth of pH 7.4 incubated at 37°C). The results showed: (a) both lag-phase duration and growth rate of this pathogen at 37°C significantly increased after cold-storage with starvation, but not after cold storage in the nutritious menstruum; (b) combined heat–acid shocks increased growth rates at 37°C of both previously cold-stored and non-cold-stored bacterial cells; (c) final concentrations of verotoxin produced by bacterial cells at 37°C were not affected by previous cold storage in the nutritious menstruum; (d) verotoxin production by bacterial cells at 37°C increased after cold storage with starvation, and heat–acid shocks further enhanced that production. Further research is needed to evaluate the food safety implications of these results, i.e. whether cells ofE. coliO157:H7 originating from nutrient-poor/lower-pH environments may be more harmful to humans than those from nutrient-rich/higher-pH foods.     

Feeding co-extruded flaxseed to pigs: Effects of duration and feeding level on growth performance and backfat fatty acid composition of grower–finisher pigs

To examine the effect of co-extrusion on subsequent n-3 fatty acids in pig tissues, 8 pigs (barrows and gilts) were assigned to either a control treatment or one of nine treatments arranged in a 3 × 3 factorial design with 3 levels of co-extruded flaxseed (5%, 10% and 15%) and 3 durations of feeding (4, 8 and 12 weeks). Feed conversion improved slightly (P = 0.01) with increasing dietary flaxseed but feeding flax for more than 8 weeks reduced average daily gain (P = 0.02). In general, the duration and level of co-extruded flaxseed feeding affected (P < 0.05) most fatty acids except for 22:6n-3 (P > 0.05). Increasing the duration of flax feeding led to significant quadratic effects in backfat 18:3n-3 (P < 0.001) and total n-3 fatty acids (P = 0.002) when feeding 5% co-extruded flaxseed. Those increases were linear (P < 0.001) when feeding 10% and 15% co-extruded flaxseed. Consequently feeding higher levels of flax for shorter periods vs. lower levels for longer periods appears to be more efficient at increasing n-3 fatty acids in pig backfat, but increases appeared to be less consistent. Moreover the addition of a 50:50 mix of extruded flax/peas to pig diets provided a highly available source of 18:3n-3 yielding n-3 fatty acid enrichments in backfat comparable to studies where extracted flaxseed oil was fed. Feeding flax co-extruded with field peas can be used to optimize consistent enrichments of n-3 fatty acids in back fat and relatively small amounts of this fat could be used to manufacture pork products to meet Canadian standards for n-3 fatty acid enrichment.     

High pressure–low temperature processing of beef: Effects on survival of internalized E. coli O157:H7 and quality characteristics

High pressure–low temperature (HPLT) processing was investigated to achieve Escherichia coli O157:H7 inactivation in non-intact, whole muscle beef while maintaining acceptable quality characteristics. Beef semitendinosus was internally inoculated with a four strain E. coli O157:H7 cocktail and frozen to − 35 °C, then subjected to 551 MPa for 4 min (HPLT). Compared to frozen, untreated control (F), HPLT reduced microbial population by 1.7 log colony forming units (CFU)/g on selective media and 1.4 log on non-selective media. High pressure without freezing (551 MPa/4 min/3 °C) increased pH and lightness while decreasing redness, cook yield, tenderness, and protein solubility. Aside from a 4% decrease in cook yield, HPLT, had no significant effects on quality parameters. It was demonstrated that HPLT treatment reduces internalized E. coli O157:H7 with minimal effect on quality factors, meaning it may have a potential role in reducing the risk associated with non-intact red meat.Industrial relevanceIn the current work, high pressure (551 MPa, 4 min) was applied to beef semitendinosus while it was at subfreezing temperatures (<− 30 °C). Most studies utilizing this high pressure–low temperature (HPLT) process employ subzero capable thermostatic high pressure equipment, which currently has no commercial equivalent. Successful HPLT runs were completed in this study using more conventional temperature control (1–3 °C) on pilot scale (20 L) high pressure processing equipment. The process yielded E. coli O157:H7 reductions of 1.4–1.7 log colony forming units (CFU)/g, which, while lower than conventional high pressure processing (HPP), may be sufficient to eliminate O157 populations typical of non-intact, whole muscle beef. Various quality factors, including color, purge losses and cooked tenderness, were unaffected by HPLT, while an equivalent HPP process at nonfreezing temperatures (551 MPa, 3 °C) induced color change (loss of redness), increased cook losses and decreased cooked tenderness compared to the control and HPLT beef. Producers of non-intact, whole muscle (blade tenderized or brine injected) meat, especially those that ship and sell frozen products, may look to HPLT processes to improve food safety.     

Short communication: Effects of prill size of a palmitic acid–enriched fat supplement on the yield of milk and milk components,and nutrient digestibility of dairy cows

The objective of our experiment was to evaluate the effects of prill size of a palmitic acid–enriched fatty acid supplement (PA; 85% C16:0) on feed intake, nutrient digestibility, and production responses of dairy cows. Twenty-four primiparous and multiparous Holstein cows were assigned based on parity and production level to replicated 4 × 4 Latin squares balanced for carryover effects with 21-d periods. Treatments were a control diet (no added PA), or 2.0% PA added as a small prill size (PA-SM; 284 ± 12.4 µm), a medium prill size (PA-MD; 325 ± 14.7 µm), or a large prill size (PA-LG; 600 ± 17.4 µm) supplement. Overall, PA treatments increased milk fat content (4.25 vs. 3.99%), milk fat yield (1.48 vs. 1.39 kg/d), 3.5% fat-corrected milk (39.2 vs. 37.7 kg/d), and improved feed efficiency (fat-corrected milk:dry matter intake; 1.51 vs. 1.42) compared with control. Compared with control, PA treatments did not affect dry matter intake, body weight, body condition score, or yields of milk, protein, and lactose. The PA treatments increased neutral detergent fiber digestibility (44.8 vs. 42.4%) and reduced the digestibility of 16-carbon fatty acids (72.3 vs. 79.1%) and total fatty acids (76.6 vs. 80.3%). Compared with control, PA treatments reduced the contents of de novo synthesized milk fatty acids (23.0 vs. 25.8 g/100 g of fatty acids) and preformed milk fatty acids (36.3 vs. 39.1 g/100 g of fatty acids), but did not affect their yields. In contrast, PA treatments increased the content (40.8 vs. 35.1 g/100 g of fatty acids) and yield (570 vs. 436 g/d) of 16-carbon milk fatty acids compared with control. The PA prill size had no effect on dry matter intake, yield of milk and milk components, or feed efficiency. However, PA-LG tended to increase milk fat content compared with PA-SM (4.28 vs. 4.22%), and it increased 16-carbon fatty acid digestibility compared with PA-MD (74.2 vs. 71.0%) and PA-SM (74.2 vs. 71.7%). Additionally, PA-LG increased total fatty acid digestibility compared with PA-MD (78.1 vs. 75.6%) and PA-SM (78.1 vs. 76.0%). Results demonstrate that PA increased milk fat content and yield, and feed efficiency. Reducing prill size decreased fatty acid digestibility, but it had no effect on animal performance under the dietary conditions and prill sizes evaluated.     

Unspecified duo–trio tests can be as powerful as the specified 2-AFC: Effects of instructions and familiarization procedures on cognitive decision strategies

Using signal detection theory (SDT) and Thurstonian analysis, it has been possible in the food industry to make various business decisions such as reformulations and cost reductions based on the degree of consumer sensory discriminability by applying equivalence/difference testing. To achieve more efficient decision-making, it is important to investigate a theoretically and operationally more powerful consumer discrimination test method. Cognitive decision strategies used in discrimination methods largely determine relative test power and thus are of theoretical and practical significance. The goal of this study was to investigate if test procedures using a constant-ref. duo–trio design enable untrained/naïve subjects to use a powerful 2-AFC strategy. Although previously the constant-ref. duo–trio design showed operational superiority to other unspecified test methods, the ‘comparison of distance’ (COD) strategy which is conventionally assumed for the duo–trio, lacks theorized power. The tested variables included two versions of duo–trio design, different familiarizations, instructions and experimental session designs. Three different iced tea samples were discriminated from a reference by 263 untrained/naïve subjects using 5 different duo–trio test procedures. Results showed that untrained/naïve subjects were able to perform the duo–trio with the reference presented twice, first and middle (DTFM) as a 2-AFC procedure, even with multiple pairs in a block design, after only two reference tastings with the information of the constant-reference. The duo–trio preceded by specified tetrad tests also showed potential as another efficient two-sequence test design. These results suggest that such constant-ref. duo–trio protocols using a 2-AFC strategy can be an alternative to the unspecified triangle and tetrad test.     

A Cassava Starch–Chitosan Edible Coating Enriched with <Emphasis Type="Italic">Lippia sidoides</Emphasis> Cham. Essential Oil and Pomegranate Peel Extract for Preservation of Italian Tomatoes (<Emphasis Type="Italic">Lycopersicon esculentum</Emphasis> Mill.) Stored at Room Temperature

The effect of edible cassava starch–chitosan coatings incorporated with rosemary pepper (Lippia sidoides Cham.) essential oil and pomegranate peel extract on the shelf-life of tomatoes during storage at 25 °C for 12 days was investigated. Sixteen formulations, containing 10 g L^?1 cassava starch and various concentrations of chitosan (5, 10, 20, 30 g L^?1), essential oil (0, 2.5, 5, 10 mL L^?1) and pomegranate peel extract (0, 5, 10, 20 mL L^?1) were prepared and applied to tomatoes. Physical–chemical and microbiological analyses were performed on days 1, 4, 8 and 12. Most of the coatings delayed the ripening of tomatoes, lowering the total soluble solids (38?44 g sucrose kg^?1) and weight loss (93?128 g kg^?1) and maintaining constant firmness compared to the uncoated tomatoes (45 g sucrose kg^?1, 175 g kg^?1) at 12 days of storage. Conversely, except red intensity (a*), which was higher for the uncoated samples, the colour parameters (L*, b*) of the coated and control tomatoes were similar at the end of storage. Uncoated and coated tomatoes showed no contamination during storage. The coatings showed potential to maintain the quality of tomatoes during storage at 25 °C for 12 days. In this context, tomatoes coated with the formulation comprising 10 g L^?1 cassava starch, 10 g L^?1 chitosan, 10 mL L^?1 essential oil and 20 mL L^?1 pomegranate peel extract showed the lowest weight loss and reduced total soluble solids content compared with uncoated ones.