Si-W-Mo coating for SiC coated carbon/carbon composites against oxidation

In order to prevent carbon/carbon (C/C) composites from oxidation at 1773 K, a Si-W-Mo coating was prepared on the surface of SiC coated C/C composites by a simple pack cementation technique. The microstructures and phase composition of the as-received multi-coating were examined by SEM, XRD and EDS. It was seen that the compact multi-coating was composed of α-SiC, Si and (W_xMo_1 − x)Si_2. Oxidation behaviour of the SiC/Si-W-Mo coated C/C composites was also studied. After 315 h oxidation in air at 1773 K and thermal cycling between 1773 K and room temperature for 17times, no weight loss of the as-coated C/C composites was measured. The excellent anti-oxidation ability of the multi-coating is attributed to its dense structure and the formation of the stable glassy SiO₂ film on the coating surface during oxidation.     

SiC nanowire-toughened SiC-MoSi2-CrSi2 oxidation protective coating for carbon/carbon composites

To prevent carbon/carbon (C/C) composites from oxidation, a dense SiC nanowire-toughened SiC-MoSi₂-CrSi₂ multiphase coating was prepared by the two-step technique composed of chemical vapor deposition (CVD) and pack cementation. The coatings were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). SiC nanowires could decrease the dimension of cracks and improve the oxidation and thermal shock resistance of SiC-MoSi₂-CrSi₂ multiphase coating. Oxidation test shows that, after introducing SiC nanowires, the weight loss of the coated sample can be reduced from 1.06% to 0.64% after oxidation at 1773 K for 155 h and decreased from 6.92% to 3.42% after thermal cycling between 1773 K and room temperature for 30 times.     

SiC nanowire-toughened MoSi2-SiC coating to protect carbon/carbon composites against oxidation

To protect carbon/carbon (C/C) composites against oxidation, a SiC nanowire-toughened MoSi₂-SiC coating was prepared on them using a two-step technique of chemical vapor deposition and pack cementation. SiC nanowires obtained by chemical vapor deposition were distributed random-orientedly on C/C substrates and MoSi₂-SiC was filled in the holes of SiC nanowire layer to form a dense coating. After introduction of SiC nanowires, the size of the cracks in MoSi₂-SiC coating decreased from 18 ± 2.3 to 6 ± 1.7 μm, and the weight loss of the coated C/C samples decreased from 4.53% to 1.78% after oxidation in air at 1500 °C for 110 h.     

A MoSi2-SiC-Si oxidation protective coating for carbon/carbon composites

To protect carbon/carbon (C/C) composites from oxidation, a dense coating has been produced by a two-step pack cementation technique. XRD and SEM analysis shows that the as-obtained coating was composed of MoSi₂, SiC and Si with a thickness of 80-100 μm. The MoSi₂-SiC-Si coating has excellent anti-oxidation property, which can protect C/C composites from oxidation at 1773 K in air for 200 h and the corresponding weight loss is only 1.04%. The weight loss of the coated C/C composites is primarily due to the reaction of C/C substrate and oxygen diffusing through the penetration cracks in the coating.     

Microstructure and oxidation of multi-layer MoSi2-CrSi2-Si coatings for SiC coated carbon/carbon composites

Multi-layer MoSi₂-CrSi₂-Si anti-oxidation coatings with different compositional ratios were prepared on the surface of SiC coated carbon/carbon (C/C) composites by a two-step pack cementation method. The microstructure and anti-oxidation performance of the coating were studied. The results show that the multi-layered coatings could protect the C/C composites from oxidation in air at 1773 K for 1000 h or 1873 K for 750 h, respectively. The anti-oxidation performance of the multi-layer MoSi₂-CrSi₂-Si coating is mainly attributed to their dense and microcrack-free structure, appropriate thermal expansion coefficient and the well dispersed MoSi₂ and CrSi₂ in the coating.     

C/SiC/MoSi2–Si multilayer coatings for carbon/carbon composites for protection against oxidation

To improve the oxidation resistance of carbon/carbon (C/C) composites, a C/SiC/MoSi₂–Si multilayer oxidation protective coating was prepared by slurry and pack cementation. The microstructure of the as-prepared coating was characterized by scanning electron microscopy, X-ray diffraction and energy dispersive spectroscopy. The isothermal oxidation and erosion resistance of the coating was investigated in electrical furnace and high temperature wind tunnel. The results showed that the multilayer coating could effectively protect C/C composites from oxidation in air for 300 h at 1773 K and 103 h at 1873 K, and the coated samples was fractured after erosion for 27 h at 1873 K h in wind tunnel. The weight loss of the coated specimens was considered to be caused by the formation of penetration cracks in the coating. The fracture of the coated C/C composites might result from the excessive local stress in the coating.     

Effect of Thermal Shock and Oxidation on Mechanical Property of Carbon/Carbon Composites with a Silicide Coating

A SiC whisker-toughened MoSi2-SiC-Si coating was prepared on carbon/carbon (C/C) composites surface by a two-step technique of slurry and pack cementation, and the effects of thermal shock and oxidation on the mechanical property of the coated C/C were studied. The flexural strength of C/C composites was improved by 6.8% after coated by SiC whisker-toughened MoSi2-SiC-Si. After thermal cycle between 1773 K and room temperature in air for 10 times, the mass loss of the coated sample was 5.08% and the percent...     

SiC/SiC–YAG–YSZ oxidation protective coatings for carbon/carbon composites

SiC/SiC–YAG–YSZ coatings were prepared by pack cementation, chemical vapor deposition and slurry painting on carbon/carbon (C/C) composites. The microstructures and oxidation behavior of coatings were investigated. The results show that the coatings displayed good oxidation and thermal shock resistance due to a dense glassy layer with silicates formed on the coating of SiC–YAG–YSZ. The weight gain rate of coated C/C composites was 1.77% after oxidation for 150 h at 1773 K. SiC in outer coating can promote the formation of oxygen diffusion barrier and lead to the optimum oxidation resistance for the coatings, compared with YSZ and YAG.     

A modified dual-layer SiC oxidation protective coating for carbon/carbon composites prepared by one-step pack cementation

To improve the oxidation resistance of SiC coating produced by pack cementation for carbon/carbon composites, a modified SiC coating has been produced by one-step pack cementation by adding ferrocene in pack compositions. The as-received coating exhibited a dual-layer dense structure, and oxidation protective ability of SiC coating could be improved by introducing ferrocene. The modified coating could protect C/C composites from oxidation for more than 100 h at 1673 K in air. The weight loss of the coated C/C composites was considered to arise from deflection of penetrating cracks formed in outer layer from inner layer to C/C matrix.     

Double SiC coating on carbon/carbon composites against oxidation by a two-step method

To improve the oxidation resistance of C/C composites, a double SiC protective coating was prepared by a two-step technique. Firstly, the inner SiC layer was prepared by a pack cementation technique, and then an outer uniform and compact SiC coating was obtained by low pressure chemical vapor deposition. The microstructures and phase compositions of the coatings were characterized by SEM, EDS and XRD analyses. Oxidation behaviour of the SiC coated C/C composites was also investigated. It was found that the double SiC coating could protect C/C composites against oxidation at 1773 K in air for 178 h with a mass loss of 1.25%. The coated samples also underwent thermal shocks between 1773 K and room temperature 16 times. The mass loss of the coated C/C composites was only 2.74%. Double SiC layer structures were uniform and dense, and can suppress the generation of thermal stresses, facilitating an excellent anti-oxidation coating.     

A ZrSiO4/SiC oxidation protective coating for carbon/carbon composites

In order to improve the oxidation resistance of carbon/carbon (C/C) composites, a ZrSiO₄ coating on SiC pre-coated C/C composites was prepared by a hydrothermal electrophoretic deposition process. Phase compositions and microstructures of the as-prepared ZrSiO₄/SiC coating were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS). The anti-oxidation property and failure mechanism of the multi-layer coating were investigated. Results show that hydrothermal electrophoretic deposition is an effective route to prepare crack-free ZrSiO₄ outer coatings. The multi-layer coating obviously exhibits two-layer structure. The inner layer is composed of SiC phase and the outer layer is composed of ZrSiO₄ phase. The bonding strength between the outer layer coatings and C/C–SiC substrate are 30.38 MPa. The ZrSiO₄/SiC coating displays excellent oxidation resistance and can protect C/C composites from oxidation at 1773 K for 332 h with a mass loss rate of only 0.48 × 10^− 4 g/cm²·h. The mechanical properties of the specimens are 84.36 MPa before oxidation and 68.29 MPa after oxidation. The corresponding high temperature oxidation activation energy of the coated C/C composites at 1573–1773 K is calculated to be 119.8 kJ/mol. The oxidation process is predominantly controlled by the diffusion rate of oxygen through the ZrSiO₄/SiC multi-coating. The failure of the coating is due to the formation of penetrative holes between the SiC bonding layer and the C/C matrix at 1773 K.     

Multilayer oxidation protective coating for C/C composites from room temperature to 1500 °C

To prevent carbon/carbon (C/C) composites from oxidation, a multilayer oxidation resistant coating was prepared. The inner SiC coating was prepared by pack cementation, and the outer SiC-MoSi₂ three-layer coating was obtained by slurry coating using silicon-sol as the caking agent. X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy were used to analyze the phase, microstructure and element distribution of the as-prepared coating. The results show that, the as-received multilayer coating has a crack-free structure with the thickness of about 300 μm. It is provided with excellent oxidation resistance from room temperature to 1500 °C in air and can protect C/C composites from oxidation for more than 120 h at 900 °C and more than 110 h at 1500 °C in air. The weight loss of the coated samples during oxidation tests mainly resulted from the oxidation of Mo₅Si₃ and the volatilization of SiO₂ in the coating.     

TaSi2 Oxidation Protective Coating for SiC Coated Carbon/Carbon Composites

为提高碳/碳复合材料在高温下的氧化防护性能,利用包埋技术在碳/碳复合材料表面制备了TaSi2/SiC复合涂层。通过XRD、SEM 和 EDS分析了涂层的晶相结构和形貌特征,在1773 K的空气介质中对TaSi2/SiC涂层碳/碳复合材料进行等温氧化实验。结果表明,复合涂层厚度为200 μm,涂层中含有SiC, Si 和TaSi2相,并且涂层中没有明显裂纹出现。EDS结果显示外层TaSi2相可有效地填充内层SiC涂层的空隙,使得内外两层涂层之间没有明显的界面,等温氧化实验曲线说明TaSi2/SiC复合涂层在1773 K的空气介质中可有效保护碳/碳复合材料233 h。     

Thermal fatigue behavior of C/C composites modified by SiC-MoSi2-CrSi2 coating

Carbon/carbon (C/C) composites were modified by SiC-MoSi₂-CrSi₂ multiphase coating by pack cementation, and their thermal fatigue behavior under thermal cycling in Ar and air environments was investigated. The modified C/C composites were characterized by scanning electron microscopy and X-ray diffraction. Results of tests show that, after 20-time thermal cycles between 1773 K and room temperature in Ar environment, the flexural strength of modified C/C samples decreased lightly and the percentage of remaining strength was 94.92%. While, after thermal cycling between 1773 K and room temperature in air for 20 times, the weight loss of modified C/C samples was 5.1%, and the flexural strength of the modified C/C samples reduced obviously and the percentage of remaining strength was only 75.22%. The fracture mode of modified C/C samples changed from a brittle behavior to a pseudo-plastic one as the service environment transformed from Ar to air. The decrease of the flexural strength during thermal cycle in air was primarily attributed to the partial oxidation of modified C/C samples.     

C/SiC/MoSi2–SiC–Si multilayer coating for oxidation protection of carbon/carbon composites

C/SiC/MoSi₂–SiC–Si oxidation protective multilayer coating for carbon/carbon (C/C) composites was prepared by pack cementation and slurry method. The microstructure, element distribution and phase composition of the as-received coating were analyzed by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). The results show that the multilayer coating was composed of MoSi₂, SiC and Si. It could effectively protect C/C composites against oxidation for 200 h with the mass loss of 3.25% at 1873 K in static air. The mass loss of the coated C/C composites results from the volatilization of SiO₂ and the formation of cracks and bubble holes in the coating.     

A MoSi2/SiC oxidation protective coating for carbon/carbon composites

To protect carbon/carbon (C/C) composites against oxidation, a MoSi₂ outer coating was prepared on pack-cementation SiC coated C/C composites by a hydrothermal electrophoretic deposition. The phase composition, microstructure and oxidation resistance of the prepared MoSi₂/SiC coatings were investigated. Results show that hydrothermal electrophoretic deposition is an effective route to achieve crack-free MoSi₂ outer coatings. The MoSi₂/SiC coating can protect C/C composites from oxidation at 1773 K for 346 h with a weight loss of 2.49 mg cm⁻² and at 1903 K for 88 h with a weight loss of 5.68 mg cm⁻².     

SiC–MoSi2/ZrO2–MoSi2 coating to protect C/C composites against oxidation

To improve the oxidation resistance of carbon/carbon (C/C) composites in air at high temperatures, a SiC–MoSi₂/ZrO₂–MoSi₂ coating was prepared on the surface of C/C composites by pack cementation and slurry method. The microstructures and phase compositions of the coated C/C composites were analyzed by scanning electron microscopy and X-ray diffraction, respectively. The result shows that the SiC–MoSi₂/ZrO₂–MoSi₂ coating is dense and crack-free with a thickness of 250–300 μm. The preparation and the high temperature oxidation property of the coated composites were investigated. The as-received coating has excellent oxidation protection ability and can protect C/C composites from oxidation for 260 h at 1773 K in air. The excellent anti-oxidation performance of the coating is considered to come from the formation of ZrSiO₄, which improves the stability of the coating at high temperatures.     

Influence of preparation temperature on the oxidation resistance and mechanical properties of C/SiC coated C/C composites

A C/SiC oxidation resistance coating was prepared on carbon/carbon (C/C) composites by slurry and pack cementation. The microstructure, oxidation resistance and mechanical properties of C/SiC coating prepared from 1773 to 2573 K were investigated. With the increase of the preparation temperature, the oxidation resistance of C/SiC coating increases, however, the flexure strength decreases gradually. The preparation of C/SiC coating on C/C composites results in the fracture behavior of C/C composites changing from pseudo-plastic to brittle failure model. The decrease of flexure strength is mainly attributed to the decrease of C/C matrix’ flexure strength at high temperature.     

B2O3 modified SiC–MoSi2 oxidation resistant coating for carbon/carbon composites by a two-step pack cementation

To protect carbon/carbon (C/C) composites against oxidation, a B₂O₃ modified SiC–MoSi₂ coating was prepared by a two-step pack cementation. The microstructure and the oxidation resistant property of the coating were studied. The results show that, the as-received coating is a dense structure, and is composed of α-SiC, β-SiC and MoSi₂. The B₂O₃ modified SiC–MoSi₂ coating has excellent oxidation resistant property, and can protect C/C composites from oxidation at 1773 K in air for more than 242 h. The failure of the coating was considered to arise from the existence of the penetration cracks in the coating during the slow cooling from 1873 to 673 K.     

Oxidation protection of SiC-coated C/C composites by SiC nanowire-toughened CrSi2–SiC–Si coating

Oxidation protective SiC nanowire-toughened CrSi₂–SiC–Si coating was prepared on SiC-coated carbon/carbon composites by chemical vapor deposition and pack cementation. SiC nanowires in the coating suppressed the cracking of the coating via various toughening mechanisms including nanowire pullout, microcrack bridging by nanowire and microcrack deflection, resulting in a good oxidation inhibition for the coated samples. The results showed that the maximal weight loss of the coated samples was only 2.55% in thermogravimetric analysis from room temperature to 1500 °C, and the weight loss of the coated samples was only 1.24% after isothermal oxidation at 1500 °C for 316 h.