掺杂单壁碳纳米管的电流特性

依据Boltzmann方程及单壁碳纳米管(SWNTs)能量色散关系,对单个掺杂SWNTs(金属型和半导体型)所加偏压、掺杂浓度及管口直径影响输运电流的性质进行数值计算.分析表明,掺杂SWNs中的电流随偏压变化呈现跃变结构;管口直径、掺杂后Fermi能级附近的态密度以及各通道输运电子的能力直接决定电流的特性,如电流强度、跃变间隔及跃变幅度;同时电流的特性也与温度有关.     

High-Performance ITO-Free Perovskite Solar Cells Enabled by Single-Walled Carbon Nanotube Films

The unprecedented advancement in power conversion efficiencies (PCEs) of perovskite solar cells (PSCs) has rendered them a promising game-changer in photovoltaics. However, unsatisfactory environmental stability and high manufacturing cost of window electrodes are bottlenecks impeding their commercialization. Here, a strategy is introduced to address these bottlenecks by replacing the costly indium tin oxide (ITO) window electrodes via a simple transfer technique with single-walled carbon nanotubes (SWCNTs) films, which are made of earth-abundant elements with superior chemical and environmental stability. The resultant devices exhibit PCEs of ≈19% on rigid substrates, which is the highest value reported to date for ITO-free PSCs. The facile approach for SWCNTs also enables application in flexible PSCs (f-PSCs), delivering a PCE of ≈18% with superior mechanical robustness over their ITO-based counterparts due to the excellent mechanical properties of SWCNTs. The SWCNT-based PSCs also deliver satisfactory performances on large-area (1 cm² active area in this work). Furthermore, these SWCNT-based PSCs can retain over 80% of original PCEs after exposure to air over 700 h while ITO-based devices only sustain ≈60% of initial PCEs. This work paves a promising way to accelerate the commercialization of ITO-free PSCs with reduced material cost and prolonged lifetimes.     

Glass Fibers with Carbon Nanotube Networks as Multifunctional Sensors

A simple approach to deposit multiwalled carbon nanotube (MWNT) networks onto glass fiber surfaces achieving semiconductive MWNT–glass fibers is reported, along with application of fiber/polymer interphases as in‐situ multifunctional sensors. This approach demonstrates for the first time that the techniques of conducting electrical resistance measurements could be applicable to glass fibers for in situ sensing of strain and damage; the techniques were previously limited to conductive and semiconductive materials. The electrical properties of the single MWNT–glass fiber and the “unidirectional” fiber/epoxy composite show linear or nonlinear stress/strain, temperature, and relative humidity dependencies, which are capable of detecting piezoresistive effects as well as the local glass transition temperature. The unidirectional composites containing MWNT–glass fibers exhibit ultrahigh anisotropic electrical properties and an ultralow electrical percolation threshold. Based on this approach, the glass fiber—the most widely used reinforcement in composites globally—along with the surface electrical conductivity of MWNTs will stimulate and realize a broad range of multifunctional applications.     

Hydrophilic Nanotube Supported Graphene–Water Dispersible Carbon Superstructure with Excellent Conductivity

In this work, it is shown that the hydrophilic functionalized multiwall carbon nanotubes (MWCNs) can stabilize a large amount of pristine graphene nanosheets in pure water without the assistance of surfactants, ionic liquids, or hydrophilic polymers. Role of stabilizer is conveyed by highly hydrophilic carbon nanotubes, functionalized by dihydroxy phenyl groups, affording a stable dispersion at concentrations as high as 15 mg mL^?1. Such multidimensional (2D/1D) graphene/MWCN hybrid is found to be dispersible also in other polar organic solvents such as ethanol, isopropanol, N,N‐dimethylformamide, ethylene glycol, and their mixtures. High‐resolution transmission microscopy and atomic force microscopy (AFM) including a liquid mode AFM manifest several types of interaction including trapping of multiwalled carbon nanotubes between the graphene sheets or the modification of graphene edges. Molecular dynamic simulations show that formation of an assembly is kinetically controlled. Importantly, the hybrid can be deposited on the paper by drop casting or dispersed in water‐soluble polymers resulting in record values of electrical conductivity (sheet resistance up to R_s ≈ 25 Ω sq^?1 for free hybrid material and R_s ≈ 1300 Ω sq^?1 for a polyvinilalcohol/hybrid composite film). Thus, these novel water dispersible carbon superstructures reveal a high application potential as conductive inks for inkjet printing or as highly conductive polymers.     

电缆温度及载流量在线监测系统设计与实现

文中以电缆温度在线监测系统为基础,结合有限元原理,构建电缆的有限元温度场模型,实时对电缆导体温度和载流量进行计算和分析,设计了基于分布式光纤测温的电缆温度及载流量在线监测系统,并通过对10 kV电缆的数据实测,验证该系统的实时性和准确性。该系统为评估电缆载流量,合理分配电力电缆负荷、保障电网的可靠运行提供科学依据。     

Temperature‐Dependent Electrical Transport in Polymer‐Sorted Semiconducting Carbon Nanotube Networks

The temperature dependence of the electrical characteristics of field‐effect transistors (FETs) based on polymer‐sorted, large‐diameter semiconducting carbon nanotube networks is investigated. The temperature dependences of both the carrier mobility and the source‐drain current in the range of 78 K to 293 K indicate thermally activated, but non‐Arrhenius, charge transport. The hysteresis in the transfer characteristics of FETs shows a simultaneous reduction with decreasing temperature. The hysteresis appears to stem from screening of charges that are transferred from the carbon nanotubes to traps at the surface of the gate dielectric. The temperature dependence of sheet resistance of the carbon nanotube networks, extracted from FET characteristics at constant carrier concentration, specifies fluctuation‐induced tunneling as the mechanism responsible for charge transport, with an activation energy that is dependent on film thickness. Our study indicates inter‐tube tunneling to be the bottleneck and implicates the role of the polymer coating in influencing charge transport in polymer‐sorted carbon nanotube networks.     

Charge Transport in High-Mobility Field-Effect Transistors Based on Inkjet Printed Random Networks of Polymer Wrapped Single-Walled Carbon Nanotubes

Printed random networks of polymer-wrapped multi-chiral semiconducting carbon nanotubes (s-SWCNTs) are an opportunity for mass-manufacturable, high-performance large-area electronics. To meet this goal, a deeper understanding of charge-transport mechanisms in such mixed networks is crucial. Here, charge transport in field-effect transistors based on inkjet-printed s-SWCNTs networks is investigated, obtaining direct evidence for the phases probed by charge in the accumulated channel, which is critical information to rationalize the different transport properties obtained for different printing conditions. In particular, when the fraction of nanotubes with smaller bandgaps is efficiently interconnected, the sparse network provides efficient charge percolation for band-like transport, with a charge mobility as high as 20.2 cm² V⁻¹ s⁻¹. However, when the charges are forced by a less efficient morphology, to populate also higher bandgap nanotubes and and/or the wrapping polymer, thermally activated transport takes place and mobility drops. As a result, a trade-off between network density and charge transport properties is identified for device current optimization, in both p- and n-type regimes. These findings shed light on the fundamental aspects related to charge transport in printed s-SWCNT mixed networks and contribute to devise appropriate strategies for the formulation of inks and processes towards cost-effective mass production schemes of high-performance large-area electronics.     

不同手性单壁碳纳米管分离及其场效应晶体管性能研究

高纯度的单手性单壁碳纳米管对于下一代碳基电子器件的发展具有重要意义。利用聚[(9,9-二辛基芴-2,7-二基)-共-联吡啶](PFO-BPy)、聚(9,9－二辛基芴－2,7－二基)(PFO)和聚(9,9－二辛基芴－共苯并噻二唑)(PFO-BT)三种聚合物在有机相中分别分选出(6,5),(7,5)和(10,5)三种手性单壁碳纳米管,具有较高纯度以及浓度,并去除了超过99%的残留分散剂。使用上述溶液沉积获得高均匀性和高密度的碳纳米管薄膜,以此作为器件沟道材料,制备了手性单壁碳纳米管场效应晶体管阵列。结果显示,大直径的(10,5)手性碳纳米管晶体管器件具有较好的电学性能,其迁移率最高达16cm²·V-1·s-1,开关比达10⁷。     

Floating Catalyst Chemical Vapor Deposition Patterning Nitrogen-Doped Single-Walled Carbon Nanotubes for Shape Tailorable and Flexible Micro-Supercapacitors

Micro-supercapacitors (MSCs) as high-power density energy storage units are designed to meet the booming development of flexible electronics, requiring simple and fast fabrication technology. Herein, a fast and direct solvent-free patterning method is reported to fabricate shape-tailorable and flexible MSCs by floating catalyst chemical vapor deposition (FCCVD). The nitrogen-doped single-walled carbon nanotubes (N-SWCNTs) are directly deposited on a patterned filter by FCCVD with designable patterns and facilely dry-transferred on versatile substrates. The obtained MSCs deliver an excellent areal capacitance of 3.6 mF cm⁻² and volumetric capacitance of 98.6 F cm⁻³ at a scan rate of 5 mV s⁻¹ along with excellent long-term cycle stability over 125 000 circles. Furthermore, the MSCs show good performance uniformity, which can be readily integrated via connection in parallel or series to deliver a stable high voltage (4 V with five serially connected devices) and large capacitance (5.1 mF with five parallel devices) at a scan rate of 100 mV s⁻¹, enabling powering the light emitting displays. Therefore, this method blazes the trail of directly preparing flexible, shape-customizable, and high-performance MSCs.     

Carbon Nanotube Based Inverted Flexible Perovskite Solar Cells with All‐Inorganic Charge Contacts

Organolead halide perovskite solar cells (PSC) are arising as promising candidates for next‐generation renewable energy conversion devices. Currently, inverted PSCs typically employ expensive organic semiconductor as electron transport material and thermally deposited metal as cathode (such as Ag, Au, or Al), which are incompatible with their large‐scale production. Moreover, the use of metal cathode also limits the long‐term device stability under normal operation conditions. Herein, a novel inverted PSC employs a SnO₂‐coated carbon nanotube (SnO₂@CSCNT) film as cathode in both rigid and flexible substrates (substrate/NiO‐perovskite/Al₂O₃‐perovskite/SnO₂@CSCNT‐perovskite). Inverted PSCs with SnO₂@CSCNT cathode exhibit considerable enhancement in photovoltaic performance in comparison with the devices without SnO₂ coating owing to the significantly reduced charge recombination. As a result, a power conversion efficiency of 14.3% can be obtained on rigid substrates while the flexible ones achieve 10.5% efficiency. More importantly, SnO₂@CSCNT‐based inverted PSCs exhibit significantly improved stability compared to the standard inverted devices made with silver cathode, retaining over 88% of their original efficiencies after 550 h of full light soaking or thermal stress. The results indicate that SnO₂@CSCNT is a promising cathode material for long‐term device operation and pave the way toward realistic commercialization of flexible PSCs.     

High‐Ampacity Power Cables of Tightly‐Packed and Aligned Carbon Nanotubes

The current‐carrying capacity (CCC), or ampacity, of highly‐conductive, light, and strong carbon nanotube (CNT) fibers is characterized by measuring their failure current density (FCD) and continuous current rating (CCR) values. It is shown, both experimentally and theoretically, that the CCC of these fibers is determined by the balance between current‐induced Joule heating and heat exchange with the surroundings. The measured FCD values of the fibers range from 10⁷ to 10⁹ A m^?2 and are generally higher than the previously reported values for aligned buckypapers, carbon fibers, and CNT fibers. To the authors’ knowledge, this is the first time the CCR for a CNT fiber has been reported. The specific CCC value (i.e., normalized by the linear mass density) of these CNT fibers are demonstrated to be higher than those of copper.     

Room-Temperature Hydrogen Sensor with High Sensitivity and Selectivity using Chemically Immobilized Monolayer Single-Walled Carbon Nanotubes

Although semiconducting single-walled carbon nanotubes (sc-SWNTs) exhibit excellent sensing properties for various gases, commercialization is hampered by several obstacles. Among these, the difficulty in reproducibly fabricating sc-SWNT films with uniform density and thickness is the main one. Here, a facile fabrication method for sc-SWNT-based hydrogen (H₂) sensors with excellent reproducibility, high sensitivity, and selectivity against CO, CO₂, and CH₄ is reported. Uniform-density and monolayer sc-SWNT films are fabricated using chemical immobilized through the click reaction between azide-functionalized polymer-wrapped sc-SWNTs and immobilized alkyne polymer on a substrate before decorating with Pd nanoparticles (0.5–3.0 nm). The optimized sc-SWNT sensor has a high room-temperature response of 285 with the response and recovery times of 10 and 3 s, respectively, under 1% H₂ gas in air. In particular, this sensor demonstrates highly selective H₂ detection at room temperature (25 °C), compared to other gases and humidity. Therefore, the chemical immobilization of the monolayer SWNT films with reproducible and uniform density has the potential for large-scale fabrication of robust room-temperature H₂ sensors.     

Single‐Walled Carbon Nanotube Networks: The Influence of Individual Tube–Tube Contacts on the Large‐Scale Conductivity of Polymer Composites

Over two decades after carbon nanotubes started to attract interest for their seemingly huge prospects, their electrical properties are far from being used to the maximum potential. Composite materials based on carbon nanotubes still have conductivities several orders of magnitude below those of the tubes themselves. This study aims at understanding the reason for these limitations and the possibilities to overcome them. Based on and validated by real single‐walled carbon nanotube (SWCNT) networks, a simple model is developed, which can bridge the gap between macroscale and nanoscale down to individual tube–tube contacts. The model is used to calculate the electrical properties of the SWCNT networks, both as‐prepared and impregnated with an epoxy‐amine polymer. The experimental results show that the polymer has a small effect on the large‐scale network resistance. From the model results it is concluded that the main contribution to the conductivity of the network results from direct contacts, and that in their presence tunneling contacts contribute insignificantly to the conductivity. Preparing highly conductive polymer composites is only possible if the number of direct, low‐resistance contacts in the network is sufficiently large and therefore these direct contacts play the key role.     

Continuous Band‐Filling Control and One‐Dimensional Transport in Metallic and Semiconducting Carbon Nanotube Tangled Films

Field‐effect transistors that employ an electrolyte in place of a gate dielectric layer can accumulate ultrahigh‐density carriers not only on a well‐defined channel (e.g., a two‐dimensional surface) but also on any irregularly shaped channel material. Here, on thin films of 95% pure metallic and semiconducting single‐walled carbon nanotubes (SWNTs), the Fermi level is continuously tuned over a very wide range, while their electronic transport and absorption spectra are simultaneously monitored. It is found that the conductivity of not only the semiconducting but also the metallic SWNT thin films steeply changes when the Fermi level reaches the edges of one‐dimensional subbands and that the conductivity is almost proportional to the number of subbands crossing the Fermi level, thereby exhibiting a one‐dimensional nature of transport even in a tangled network structure and at room temperature.     

Iron‐Doped Cobalt Monophosphide Nanosheet/Carbon Nanotube Hybrids as Active and Stable Electrocatalysts for Water Splitting

Developing earth‐abundant, active, and stable electrocatalysts for water splitting is a vital but challenging step for realizing efficient conversion and storage of sustainable energy. Here, a multiscale structure‐engineering approach to construct iron (Fe) doped cobalt monophosphide (CoP) hybrids for efficient electrocatalysis of water splitting is reported. A two‐step method is developed to synthesize CoP nanosheets with uniform Fe doping and hybridization with carbon nanotubes (CNTs). The nanostructuring, uniform doping, and hybridization with CNT afford efficient electrocatalysts comparable to Pt/C for hydrogen evolution reactions in acidic, neutral, and alkaline electrolytes. It is found that the Fe doping level has different effects on catalytic activities in different electrolytes. Furthermore, after in situ oxidization/hydrolysis of the phosphides to corresponding oxyhydroxides, the hybrid electrocatalysts exhibit better performances than the benchmark commercial Ir/C for catalyzing the oxygen evolution reaction. A two‐electrode alkaline water electrolyzer constructed with these hybrid electrocatalysts can afford a current density of 10 mA cm^?2 at a voltage of 1.5 V.     

敷铜PCB走线与过孔的电流承载能力

使用FR4敷铜板PCBA上各个器件之间的电气连接是通过其各层敷着的铜箔走线和过孔来实现的。由于不同产品、不同模块电流大小不同,为实现各个功能,设计人员需要知道所设计的走线和过孔能否承载相应的电流,以实现产品的功能,防止过流时产品烧毁。文中介绍设计和测试FR4敷铜板上走线和过孔的电流承载能力的方案和测试结果,其测试结果可以为设计人员在今后的设计中提供一定的借鉴,使PCB设计更合理、更符合电流要求。