Effect of thermal exposure on the properties of phenolic composites: Dynamic mechanical analysis

Changes in the dynamic response of glass‐reinforced phenolic composites following thermal exposure at 180^oC for periods of time up to 28 days were monitored using dynamic mechanical analysis. Four phenolic resins were investigated: a resol/novolac blend, a phenolic–furan novolac/resol graft copolymer, a novolac, and a resol. Reactive blending and copolymerization of phenolic resins are currently being investigated to determine if these techniques will produce phenolic resins (and composites) that have improved impact properties and retain the excellent high‐temperature properties of resol and novolac phenolic resins. The results indicate that thermal aging at 180^oC for 1 day led to a more complete cure of all four phenolic resins as indicated by an increase in the temperature of the maximum of plots of both loss modulus (E″) and tan δ versus temperature. The storage modulus (E′) of the composites at 40^oC varied little following thermal aging at 180^oC for 1 day but decreased with increasing exposure time for samples aged 2, 7, and 28 days. Thermal aging led to an increase in E′ at higher temperatures and the magnitude of E′ at a given temperature decreased with increasing exposure time. The magnitude of E″ and tan δ decreased with aging time for all resins, although E″ and tan δ were larger for the blend and copolymer composites than for the novolac and resol composites. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 385–395, 2001     

Activation energy and curing behavior of resol‐ and novolac‐type phenolic resins by differential scanning calorimetry and thermogravimetric analysis

The thermal behavior, thermal degradation kinetics, and pyrolysis of resol and novolac phenolic resins with different curing conditions, as a function of the formaldehyde/phenol (F/P) molar ratio (1.3, 1.9, and 2.5 for the resol resins and 0.5, 0.7, and 0.9 for the novolac resins) were investigated. The activation energy of the thermal reaction was studied with differential scanning calorimetry at five different heating rates (2, 5, 10, 20, and 40°C/min) between 50 and 300°C. The activation energy of the thermal decomposition was investigated with thermogravimetric analysis at five different heating rates (2, 5, 10, 20, and 40°C/min) from 30 to 800°C. The low molar ratio resins exhibited a higher activation energy than the high molar ratio resins in the curing process. This meant that less heat was needed to cure the high molar ratio resins. Therefore, the higher the molar ratio was, the lower the activation energy was of the reaction. As the thermal decomposition of the resol resins proceeded, the activation energy sharply decreased at first and then remained almost constant. The activation energy of the thermal decomposition for novolac resins with F/P = 0.5 or F/P = 0.7 was almost identical in all regions, whereas that for novolac resins with F/P = 0.9 gradually decreased as the reaction proceeded. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2589–2596, 2003     

Dynamic mechanical analysis of fiber-reinforced phenolics

Dynamic mechanical analysis (DMA) was used to investigate the thermomechanical behavior and the effects of postcuring on a range of glass-reinforced phenolics. The materials examined were a pure resol (reinforced with S- and E-glass), a pure novolac (reinforced with S-glass), and three derivatives of the resol and/or novolac: a resol/novolac blend, a phenolic–furan graft copolymer, and a rubber-modified resol (all reinforced with S-glass). The blend and copolymer were prepared to obtain phenolic resins with improved impact strength, without degeneration of their high-temperature performance. They have a more loosely crosslinked structure compared to the pure resol or novolac. The rubber-modified resol was prepared with the intention of reducing the brittleness of the resin structure by incorporating an elastomeric phase within the resol resin matrix. It was found that the stiffness and glass transition temperature (T_g) of the materials could be increased by postcuring, which also produced a decrease in their damping capacity. Knowing that the postcure process is a function of time and temperature, a master curve was constructed that allowed prediction of the T_g of the resol/novolac blend over a broad range of postcure times and temperatures. The effect of frequency on the storage modulus of the pure resol (S-glass), copolymer, and blend was also studied from 0.01 to 100 Hz. Master curves were constructed by time–temperature superpositioning that allowed prediction of the storage modulus at times and temperatures that are not experimentally accessible. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 649–658, 1999     

Pultruded fiber-reinforced polyurethane-toughened phenolic resin. II. Mechanical properties,thermal properties,and flame resistance

A novel process has been developed to toughen phenolic resin by polyurethane for fiber-reinforced pultruded composites. The mechanical properties of the composites (tensile strength, flexural strength, and notched Izod impact strength) approach maximum values at 10 wt% of the blocked polyurethane content. The fabricated composites show good mechanical properties and possess low void fraction. Notched Izod impact strength of the composite (with 5 wt% polyurethane content) increases by more than 30% compared to the virgin composite. The thermogravimetric analysis (TGA) showed that the temperature for the 5% weight loss of the phenolic/polyurethane copolymer decreases with the increasing of the polyurethane content; however, the thermal degradation temperature is still higher than 350°C. Differential scanning calorimetric analysis (DSC) showed that the onset point of copolymer is 20°C higher than that of the virgin one. The presence of the blocked polyurethane may hinder the polymerization of phenolic resin. The modified composite shows excellent dimensional stability. The copolymer composite also possesses good fire resistance. © 1996 John Wiley & Sons, Inc.     

Phenolic‐epoxy matrix curable by click chemistry—synthesis,curing, and syntactic foam composite properties

Alkyne functional phenolic resin was cured by azide functional epoxy resins making use of alkyne‐azide click reaction. For this, propargylated novolac (PN) was reacted with bisphenol A bisazide (BABA) and azido hydroxy propyloxy novolac (AHPN) leading to triazole‐linked phenolic‐epoxy networks. The click cure reaction was initiated at 40–65°C in presence of Cu₂I₂. Glass transition temperature (Tg) of the cured networks varied from 70°C to 75°C in the case of BABA‐PN and 75°C to 80°C in the case of AHPN‐PN. DSC and rheological studies revealed a single stage curing pattern for both the systems. The cured BABA‐PN and AHPN‐PN blends showed mass loss above 300°C because of decomposition of the triazole rings and the novolac backbone. Silica fiber‐reinforced syntactic foam composites derived from these resins possessed comparable mechanical properties and superior impact resistance vis‐a‐vis their phenolic resin analogues. The mechanical properties could be tuned by regulating the reactant stoichiometry. These low temperature addition curable resins are suited for light weight polymer composite for related applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41254.     

Study on BMI modified allyl‐functional novolac resin/silica cloth composites: Effect of allylation degree on thermal and mechanical properties

A series of allyl‐functional novolac resin with various allylation degree, from 32.4 to 114.6%, were synthesized and then blended reactively with 4,4′‐bismaleimide biphenyl methane (BMI) at a weight ratio of 2.50:1 to get BMI‐modified allyl‐functional novolac (BMAN) resins. BMAN resins were used as matrix resin to fabricate BMAN/Silica cloth composites by compression molding process. Heat‐resistant properties of the composites were evaluated by means of dynamic mechanical analysis. The results indicated that thermal resistance of the composites increased as allylation degree of BMAN resins increased. Mechanical properties of the composites, including interlaminar shear strength (ILSS) and flexural strength at room temperature and 300°C, were determined, and the results showed that with increase in allylation degree of matrices the ILSS and flexural strength values of composites at room temperature decreased, but the values of ILSS and flexural strength at 300°C increased. Scanning electron microscope morphology analysis of fracture surface for composites revealed that tough interphase was responsible for the better mechanical properties of the composites based on lower allylation degree resins. POLYM. COMPOS., 28:180–185, 2007. © 2007 Society of Plastics Engineers     

Mechanical properties,thermal stability,and flame retardance of novolac‐type phenolic resin blended with poly(dimethylsiloxaneadipamide)

Mechanical properties (flexural strength, flexural modulus, and notched Izod impact strength), thermal stability, and flame retardance of poly(dimethylsiloxane adipamide) (PDMSA)‐toughened novolac type phenolic resin were investigated. Mechanical properties of modified novolac‐type phenolic resin increase with PDMSA contents, because the soft segment of PDMSA absorbs the loads in the network of brittle novolac‐type phenolic resins. TGA results show that the thermal degradation temperatures are higher than 400°C, and the temperature of 10% weight loss increases with increasing the PDMSA content. The char yield increases with novolac‐type phenolic resin content. The morphologies of the fracture surface of the modified novolac‐type phenolic resin were investigated by scanning electron microscopy (SEM). Morphological results agree with those from mechanical properties of the modified novolac‐type phenolic resin. The modified novolac‐type phenolic resin also shows excellent flame retardance that is UL‐94, V‐1, and the limited oxygen index is higher than 35. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 631–637, 2001     

Synthesis and properties of cardanol‐based epoxidized novolac resins modified with carboxyl‐terminated butadiene–acrylonitrile copolymer

Cardanol‐based, novolac‐type phenolic resins were synthesized with a cardanol‐to‐formaldehyde molar ratio of 1 : 0.7 with different dicarboxylic acid catalysts, including oxalic and succinic acids. These novolac resins were epoxidized with a molar excess of epichlorohydrin at 120°C in a basic medium. The epoxidized novolac resins were separately blended with different weight ratios of carboxyl‐terminated butadiene–acrylonitrile copolymer (CTBN) ranging between 0 and 20 wt % with an interval of 5 wt %. All of the blends were cured at 120°C with a stoichiometric amount of polyamine. The formation of various products during the synthesis of the cardanol‐based novolac resin and epoxidized novolac resin and the blending of the epoxidized novolac resin with CTBN was studied by Fourier transform infrared spectroscopy analysis. Furthermore, the products were also confirmed by proton nuclear magnetic resonance and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectroscopy analysis. The molecular weights of the prepared novolacs and their epoxidized novolac resins were determined by gel permeation chromatography analysis. The blend samples, in both cases, with 15 wt % CTBN concentrations showed the minimum cure times. These blend samples were also the most thermally stable systems. The blend morphology, studied by scanning electron microscopy analysis, was, finally, correlated with the structural and property changes in the blends. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Thermally resistant carbazole‐modified phenol–formaldehyde resins

Phenol–formaldehyde resins were modified with carbazole in order to improve their thermal resistance. Attempts to incorporate carbazole rings into novolac and resol resins were made using three methods: (1) the addition of N‐(hydroxymethyl)carbazole (HMC) into a phenol–formaldehyde mixture, (2) the addition of carbazole into a phenol–hydroxymethyl derivative of acetone mixture, where the hydroxymethyl derivative of acetone was used as formaldehyde donor, and (3) by prolonging the time of high‐temperature reaction between phenol, carbazole and formaldehyde. The temperature and time of reaction were critical for incorporation of carbazole, which successfully led to highly temperature‐resistant carbazole‐modified novolacs for the latter procedure. When carbazole was incorporated into novolac structure at a level of 8 mol%, the thermal resistance increased by 118 °C measured as 5% mass loss temperature. Other procedures led to solids containing carbazole or HMC as physical admixtures. The obtained composites revealed variable thermal resistance effects; the carbazole‐modified resol containing 9 mol% of carbazole showed 47 °C increase of thermal resistance in comparison with non‐modified resol, measured as 5% mass loss temperature. © 2015 Society of Chemical Industry     

Elevated temperature testing for comparison of glass/resin composites

Static test methods were used to evaluate and compare the thermal and mechanical properties of several glass/thermoset laminated composites between 25° and 400°C. The unidirectional matrix composites consisted of phenolic-modified epoxy, epoxy novolac, epoxy, and modified phenolic resins. These materials were selected as potential alternative materials for rotary compressor vanes. Dynamic mechanical analysis (DMA), thermomechanical analysis (TMA), and thermogravimetric analysis (TGA) techniques were selected to evaluate elevated temperature performance. The short-beam shear test was chosen to measure interlaminar shear properties. The results indicated that an elevated-temperature matrix, such as the modified phenolic resin, may not result in optimum composite strengths. Instead, an epoxy resin reinforced with glass fibers provides a better balance between elevated-temperature performance and interlaminar shear strength. The test results of this study, in addition to being adequate for discriminating the materials for initial selection purposes, were obtained quickly and easily. Moreover, the thermal results provide a more realistic understanding of composite elevated-temperature characteristic than do those of the present standard test.     

Role of paper sludge particle size and extrusion temperature on performance of paper sludge–thermoplastic polymer composites

The effect of paper sludge's particle size and extrusion temperature on the physical and mechanical properties of paper sludge–thermoplastic polymer composites was investigated. In the experiment three levels of particle sizes for the paper sludge and four extrusion temperatures were designed to examine the physical and mechanical properties of these composites. The ash contents of the paper sludge were about 73.7, 46.2, and 38.1% with particle sizes of below 0.15, 0.18–0.25, and 0.42–0.84 mm, respectively, which meant lower ash content and higher cellulose fiber content, in the larger particle size of paper sludge. As the particle size of the paper sludge decreased, the swelling thickness, water absorption, and tensile and flexural strengths of the composite improved; but the particle size of the paper sludge had no effect on its unnotched impact strength. With the increase of the extrusion temperature the thickness swelling and water absorption of the composites were slightly improved but not statistically different. A rise of the extrusion temperature generally had a positive effect on the tensile and flexural properties of the composite. The notched and unnotched impact strengths of the composite increased with the increase of the extrusion temperature from 190 to 230°C, but they decreased slightly at an extrusion temperature of 250°C. This low impact energy at an extrusion temperature of 250°C may be attributed to the excessively brittle fibers from thermal decomposition. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2709–2718, 2001     

Comparisons of the cure of phenol–formaldehyde novolac and resol systems by differential scanning calorimetry

Comparisons were made of differential scanning-calorimetric (DSC) thermograms of both liquid and powdered commercial phenol–formaldehyde resins. By a combination of the results from analyses under a variety of conditions, such as ambient pressure, high pressure, using freeze-dried samples, and also by direct observation of the resin-curing process in wood-veneer assemblies, the curing reactions of phenol–formaldehyde resins were found to differ for resol and novolac systems. At a heating rate of 10°C/min, the resol resin showed endothermic curing reactions at temperatures of about 150°C, while the novolac-type resin showed an exothermic peak maximum at about 160°C. Results are presented to show how DSC can be used to differentiate between a resol and novolac system.     

Mechanical properties,thermal stability,and flame retardance of pultruded fiber-reinforced poly(ethylene oxide)-toughened novolak-type phenolic resin

The mechanical properties (flexural modulus, static tensile strength, notched Izod impact strength), miscibility, thermal stability, and flame retardance of a poly(ethylene oxide) (PEO)-toughened phenolic resin glass pultruded composite were investigated. The mechanical properties of a pultruded glass fiber-reinforced modified phenolic resin composite increased while the soft segment of PEO absorbs the loads in the network of brittle phenolic resin. The phenolic/PEO blend is completely miscible, from the results of differential scanning calorimetry. Its thermal degradation temperature is always higher than 370°C and decreased with increasing PEO content. The morphology of the interface between the fiber and matrix is well wetted-out with increasing PEO content from the result with a scanning electron microscope (SEM). The modified phenolic composite also shows excellent flame retardance that is UL-94, V-0, and the limited oxygen index is more than 55. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 1129–1136, 1998     

Studies on modified phenolic resin. Iv: Properties of phenolic resin modified with 4-hydroxyphenyl- maleimide/n-butylacrylate copolymers

Three 4-hydroxyphenylmaleimide/ n-butylacrylate (HPMI/n-BuA) copolymers with different monomer ratios were synthesized. Their average molecular weights, glass transition temperatures (T,_g), and thermal decomposition temperatures were measured. It was found that these copolymers had higher average molecular weights and higher thermal decomposition temperatures than novolac. Modified phenolic resins were prepared by transfer moulding from moulding compounds consisting of novolac, the copolymer, hexamethylenetetramine (hexamine), and glass fibre. Properties of the three kinds of modified phenolic resins were examined by flexural test, impact test, dynamic thermomechanometry, and observation of morphology. It was found that phenolic resin modified with HPMI/ n-BuA (1/3-6) copolymer and modified with HPMI/n-BuA (1/7-0) copolymer showed good toughness and good heat resistance. It was also found that the heat resistance of modified phenolic resins was improved by after-cure, but the mechanical properties were decreased by after-cure: similar behaviour was observed for unmodified phenolic resin.     

Synthesis and characterization of a new class of thermosetting resins: Allyl and propargyl substituted cyclopentadiene derivatives

A series of all-hydrocarbon resins were synthesized by reacting cyclopentadiene allyl chloride, propargyl chloride, or a mixture of allyl chloride and propargyl ide, under phase transfer conditions. Phase transfer reactions with and without added solvents, and with either quaternary ammonium or crown ether catalysts, yielded similar products consisting of a mixture of 1,1-disubstituted cyclopentadiene (minor amount) and 2-3 isomers each of tri-, tetra-, penta-, and hexa-substituted derivatives. No further reaction of each these components possible. The overall substitution pattern varied little with changes in reaction conditions although limiting the allyl chloride content led to still reactive, partially substituted products. Incorporation of all-propargyl and high propargyl-to-allyl mixed functionalities on cyclopentadiene yielded products whose stability was very hindering their thorough characterization. Preliminary evaluation was there-carried out for mixed resins with lower propargyl functionality. The allyl substituted resin (allylated cyclopentadiene, ACP) underwent thermal cure lout initiator at around 200°C while allyl/propargyl substituted resin (7:1 ratio, APCP) showed a faster, lower temperature cure at around 120°C. Cationic cure of ACP was also initiated by a novel sulfonium salt at around 100°C. Neat resin when cured at 200°C gave material with a flexural storage modulus 2 of about 300 MPa. Further cure at 250°C raised the modulus to 1.2 GPa. resin gave composites with excellent properties when used with glass and on fibers. Flexural modulus values (by DMA) of ∼ 66 GPa were obtained for ACP/carbon fiber composites compared with 42 GPa for epoxy/carbon composites made in our laboratories using commercially available materials. The modulus values at 300°C dropped to 10% of the room temperature value for the epoxy composites, while the ACP/carbon composite maintained 60% of its room temperature value at 300°C. When brought back to ambient temperature, the modulus of latter sample had increased to 80 GPa and that of the epoxy composite dropped to 23 GPa. Glass fiber ACP composites performed similar to an epoxy composite up to 200°C but maintained properties up to 300°C while those of the epoxy were drastically reduced. TGA analysis of both cured ACP resin and its composites showed decomposition beginning at 375°C. Three-point-bending tests indicated very high modulus with brittle failure for ACP composites. Scanning electron micrographs showed moderate bonding of the new resin to both carbon glass fiber surfaces. This new class of thermosetting resins offers excellent potential for application in low-cost glass and carbon composites with good thermal and physical properties.     

Synthesis of novolac‐type phenolic resins using glucose as the substitute for formaldehyde

Novel Novolac type phenolic resins were prepared using glucose as the substitute for toxic formaldehyde (a carcinogenic chemical). The resins were synthesized with varying molar ratios of phenol to glucose, catalyzed by strong acid (such as sulfuric acid) at 120–150°C. Analysis of the resins using gel permeation chromatography (GPC) and proton nuclear magnetic resonance (¹H‐NMR) showed that they were broadly distributed oligomers derived from the Fridel‐Crafts condensation of phenol and glucose. Using hexamethylenetetramine (HMTA) as the curing agent, the phenol‐glucose resins could be thermally cured and exhibited exothermic peaks at 130–180°C, typical of thermosetting phenolic resins. The cured resins showed satisfactory thermal stability, e.g., they started to decompose at >280°C with residual carbon yields of above 58% at 600°C. Based on the thermal properties, phenol‐glucose resin with a molar ratio of 1 : 0.5 is promising as it could be cured at a lower temperature (147°C) and exhibited a satisfactorily good thermal stability: it started to decompose at >300°C with a residual carbon yield of >64% at 600°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Kinetic parameters of thermal degradation of polyethylene glycol‐toughened novolac‐type phenolic resin

The miscibility and thermal degradation of poly(ethylene glycol) (PEG)‐toughened novolac‐type phenolic resin were investigated. Differential scanning calorimetry (DSC) results confirmed that the phenolic resin/PEG blend was blended completely. Infrared spectra show that hydrogen bonding existed in the blends. Thermal degradation of PEG blended with novolac‐type phenolic resin was studied utilizing a dynamic thermogravimetric technique in a flowing nitrogen atmosphere at several heating rates (i.e., 5, 10, 20, 40°C/min). Thermal degradation of phenolic resin/PEG blends takes place in multiple steps. The thermal behavior and the thermal stability affected the thermal degradation, which coincided with the data from the thermal degradation of novolac‐type phenolic resin/PEG blends by thermogravimetric analysis (TGA). © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 188–196, 2001     

Thermally reversible and self‐healing novolac epoxy resins based on Diels–Alder chemistry

The modified novolac epoxy resins with furan pendant groups were prepared by novolac epoxy resin and furfuryl alcohol and then crosslinked by bifunctional maleimide via Diels–Alder (DA) chemistry to obtain the thermally reversible and self‐healing novolac epoxy resins. The as‐prepared crosslinked novolac epoxy resins were characterized by FT‐IR, NMR, TGA, and DMA. The results indicate that the novel crosslinked novolac epoxy resins present higher storage modulus (2.37 GPa at 30°C) and excellent thermal stability (348°C at 5% mass loss). Furthermore, the thermal reversible and self‐healing properties were studied in detail by DSC, SEM, thermal re‐solution, and gel–solution–gel transition experiments. All the results reveal that the crosslinked novolac epoxy resins based on DA reaction can be used as smart material for the practical application of electronic packaging and structural materials. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42167.     

玻纤增强酚醛注塑料的制备技术和性能

研究了玻纤增强酚醛注塑料制备过程中基质树脂的选择、固化作用与交联结构的控制及玻纤分散技术,考察了不同基质树脂制备的酚醛注塑料的固化成型结构形态和固化流变特性.进一步采用热固性与热塑性酚醛树脂相复配的基质树脂体系,经配方和制备工艺的优化,制备了高填充量玻纤增强酚醛注塑料.该注塑料具有良好的注塑成型性能,注塑制品具有高强度, 冲击强度达到4.3 kJ•m^-2,弯曲强度137.4 MPa,同时热变形温度为 245 ℃,阻燃性通过美国UL 94 V-0级认证,并具有优良的尺寸稳定性、电绝缘性能和低成本优势.     

Study on modified phenolic resin. III. Modification with p-hydroxyphenylmaleimide/acrylic ester copolymer

The improvement of toughness and heat resistance of phenolic resin was examined by blend of novolac and copolymers prepared from p-hydroxyphenylmaleimide (HPMI) and acrylic ester. Copolymers of HPMI and acrylic esters, such as methyl acrylate, ethylacrylate, n-butylacrylate, or 2-ethylhexyl acrylate, were synthesized. Average molecular weights, glass transition temperatures (T_g) and thermal decomposition temperatures were measured. The miscibility of the copolymers with novolac was evaluated. It was found that these copolymers had higher average molecular weight and higher thermal decomposition temperature than those of novolac; they also had good miscibility with novolac. Molding compounds were prepared by hot roll-kneading of mixtures, which involved novolac, the copolymer, hexamethylenetetramine (hexamine), and glass fiber. Test pieces of the modified phenolic resins were prepared by transfer molding from the molding compounds. It was found that phenolic resin, modified with HPMI/ethylacrylate copolymer or HPMI/n-butylacrylate copolymer, which consisted of numerous units of acrylic ester, showed both good toughness and good heat resistance.