共查询到20条相似文献,搜索用时 15 毫秒
1.
以自制的双端羟基聚乳酸与α-溴代丙酰溴反应而制得的含溴端基的聚乳酸为大分子引发剂,溴化亚铜/2,2′-联吡啶为催化体系,研究了N-乙烯基吡咯烷酮的原子转移自由基聚合行为,制得了具有两亲性聚乳酸嵌段共聚物。随单体/引发剂摩尔比的增大、聚合温度的升高,共聚物溶液的特性黏度增大,共聚物薄膜的吸水率增加;共聚物在不同降解介质中的降解规律相似,均随降解时间的延长,共聚物薄膜的失重增加,且在不同介质中呈现的降解速率表现为碱液>酸液>水>缓冲液。对聚合物进行了结构表征。 相似文献
2.
3.
4.
Xue‐Yong Liu Xiao‐Bin Ding Zhao‐Hui Zheng Yu‐Xing Peng Albert S
C Chan C
W Yip Xin‐Ping Long 《Polymer International》2003,52(2):235-240
Amphiphilic magnetic microspheres ranging in diameter from 5 to 100 µm were prepared by dispersion copolymerization of styrene and poly(ethylene oxide) vinylbenzyl (PEO‐VB) macromonomer (MPEO) in the presence of Fe3O4 magnetic fluid. The effects of various polymerization parameters on the average particle size were systematically investigated. The average particle size was found to increase with increasing styrene concentration and initiator concentration. It also increased with decreasing stabilizer concentration and molecular weight of MPEO. The content of the hydroxyl groups localized in the microspheres ranged from 0.01 to 0.2 mmol g?1. © 2003 Society of Chemical Industry 相似文献
5.
以丙烯酸羟乙酯(HEA)、丙烯腈(AN)为单体,偶氮二异丁腈(AIBN)为引发剂,β-巯基乙醇(β-ME)为链转移剂在甲醇溶剂中通过自由基聚合,制备了HEA-AN共聚物。用红外光谱(FT-1 1IR)、H核磁共振(H-NMR)以及热重分析(TG)对聚合物的结构进行了分析表征。通过控制变量的方法研究了反应温度、时间、引发剂用量、链转移剂用量等对聚合反应中的黏均分子质量、转化率的影响;对比分析了一次投料和连续投料2种方法合成的共聚物的羟值,发现连续投料法合成的聚合物在反应过程中羟值变化很小,合成的聚合物结构组成均匀性更好。 相似文献
6.
基于原子转移自由基聚合(ATRP)机理,以二甲基一氯硅烷封端的烯丙基-聚乙二醇为起始剂,甲基丙烯酸乙酯(EMA)为单体,通过控制反应温度,合成了一系列聚合度(DP_(NMR))分别为0. 74,1. 67和3. 07的新型对称性两亲含硅共聚物(PEMA-b-Si-PEG-Si-b-PEMA),并评价了该共聚物在氯仿/水界面的界面活性和吸附行为。结果表明:该类聚合物可以有效降低氯仿/水界面张力,具有最短PEMA链的聚合物可将氯仿/水界面张力从32 m N/m降低至约23 m N/m。动态界面张力分析表明:低浓度的共聚物在吸附的初始阶段符合扩散控制,且较短的PEMA链段有利于产生较快的扩散速率。平衡界面张力分析表明:随着界面浓度的增加,共聚物将表现出多种吸附状态,其吸附状态的数量以及聚合物在界面的偏摩尔面积将随着PEMA链长度的增加而增加。 相似文献
7.
8.
以1,1-二苯基乙烯(DPE)为分子量调节剂,偶氮二异丁腈(AIBN)为引发剂进行甲基丙烯酸丁酯(BMA)的可控自由基聚合(DPE法)。研究了溶剂、DPE用量及反应温度对于聚合的影响,得到分子量分布较窄(PDI=1.43)的含有DPE半醌式休眠种结构的聚甲基丙烯酸丁酯(PBMA)。以PBMA为引发剂引发甲基丙烯酸二甲氨基乙酯(DMAEMA)聚合,得到分子量分布较窄的(PDI=2.0)双亲性嵌段共聚物(PBMA-b-PDMAEMA)。核磁共振氢谱(1H NMR)测得共聚物组成与GPC测试结果相近。差示扫描量热分析(DSC)测试表明嵌段共聚物在11℃和35℃处有两个玻璃化转变温度。色浆的流变和粒径测试及漆膜性能测试表明,将所得双亲性嵌段共聚物作为酞菁蓝颜料分散剂,可以明显提高酞菁蓝颜料在丙烯酸酯树脂中的分散效率。 相似文献
9.
Wei Li Xiao‐Bing Ding Zhao‐Hui Zheng Wen‐Chuan Zhang Jing‐Gen Deng Yuxing Peng Albert S. C. Chan C. W. Yip 《应用聚合物科学杂志》2001,81(2):333-339
Amphiphilic microspheres, ranging in size from 3 to 35 μm, were prepared by suspension copolymerization of styrene with poly(ethylene oxide) vinylbenzyl (PEO–VB) macromonomer by changing polymerization conditions. It was found that an increase in the amount of dispersant and the PEO–VB concentration resulted in decreases of the size and size distribution of amphiphilic microspheres. The morphology, size, and size distribution of amphiphilic microspheres were characterized by scanning electron microscopy. The structure of copolymer was confirmed by infrared spectroscopy, differential scanning calorimetry, elemental analysis, and X‐ray photoelectron spectroscopy. The content of the hydroxyl groups localized in the microspheres ranged from 0.05 to 0.2 mmol/g. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 333–339, 2001 相似文献
10.
The study on batch emulsifier‐free emulsion copolymerization of styrene with methacrylic acid was conducted. The copolymerization process was followed by gravimetry, infrared, and transmission electron microscopy. The copolymerization mechanism differs from that of styrene with acrylic acid. The effect of solid content on particle size was examined, and it was found that the particle size was increased as the solid content was increased. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1747–1751, 2003 相似文献
11.
The synthesis of controlled polystyrenes with different molecular weights has been performed in the presence of 1-phenyl-1-(2,2,6,6-tetramethyl-1-piperidinyloxy)ethane (PETEMPO). The polystyrenes have served as macroinitiators for the formation of poly(styrene-b-butyl methacrylate) block copolymers. Using differential scanning calorimetry (DSC) it has been shown that all block copolymers synthesized do not present phase segregation. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 14–21, 2001 相似文献
12.
Amphiphilic diblock copolymers of polystyrene-b-poly(methacrylic acid) were synthesized by means of atom transfer radical polymerization. First, the polystyrene with a bromine atom at the chain end (PS-Br) was prepared using styrene as the monomer, 1-bromoethyl benzene as the initiator, and CuCl/2,2′-bipyridyl (bpy) as the catalyst ([1-bromoethyl benzene]/[CuCl]/[bpy] = 1:1:3). The polymerization was well controlled. Second, the diblock copolymer of polystyrene-b-poly(tert-butyl methacrylate) was synthesized also by atom transfer radical polymerization using PS-Br as the macro-initiator, CuCl/bpy as the catalyst, and tert-butyl methacrylate (tBMA) as the monomer. Finally, the amphiphilic diblock copolymer, PS-b-PMAA, was obtained by hydrolysis of PS-b-PtBMA under the acid condition. The molecular weight and the structure of aforementioned copolymers were characterized with gel permeation chromatography, infrared, and nuclear magnetic resonance. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2381–2386, 2001 相似文献
13.
An experimental investigation of the kinetics of the bulk free radical copolymerization of styrene/butyl acrylate initiated with 2,2′-azobisisobutyronitrile (AIBN) was conducted at 50°C using various initiator concentrations and initial monomer ratios including the azeotropic composition. Reactivity ratios were determined by analyzing composition data using the error-in-variables model. The experiments, designed using the Tidwell-Mortimer criterion, were conducted in sealed ampoules at 50°C to low conversion levels (< 7%). From the calculated reactivity ratios, the azeotropic composition was determined and further experiments were run at these conditions as well as at two other initial monomer feed compositions in order to collect composition, rate and molecular weight data. The experiments were run through the full conversion range at two different initiator concentrations. 相似文献
14.
Amphiphilic random copolymer consisting of monomeric units of poly (butyl acrylate) and poly (maleic acid salt) was synthesized and characterized. The emulsion polymerization kinetics of styrene stabilized by this copolymer was investigated. The influencing factors, including polymeric surfactant concentration, initiator concentration and polymerization temperature, were systematically studied. The kinetic data show that the polymerization rate (RP) increased with the increase of the polymeric surfactant concentration ([S]) and polymerization temperature (T). At the higher [S], droplets nucleation and micelle nucleation coexisted in the polymerization system; at the lower [S], only the droplets nucleation process existed. The polymerization did not follow Smith‐Ewart Case II kinetics. Dynamic light scatter and transmission electron microscope were utilized to measure the sizes and shapes of the particles, respectively. It would be speculated that a kind of large heterogeneous particles with multiple‐active‐sites was formed in the polymerization system. The increasing of RP with increasing initiator concentration ([KPS]) was rapid at a medium [KPS], but the slowly increasing was observed at a lower or higher [KPS]. It was attributed to the barrier effect of the polymeric surfactant around the monomer droplets. The polymerization activation energy was 60.29 kJ/mol. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009 相似文献
15.
In this article, experimental and simulated results are presented for the evolution of the copolymer composition as unsaturations are consumed in the free‐radical cross‐linking copolymerization of Styrene(St) and BisphenolA glycerolate dimethacrylate (BDMA). Real time FTIR measurements were performed to monitor the depletion of each comonomer double bond during the isothermal curing reaction at 80°C. From the experimental data corresponding to different feed compositions, the initial reactivity ratios and their evolution with conversion were determined via a nonlinear least squares optimization of the integrated form of the copolymerization equation. The reactivity ratio of St increases continuously and exponentially with the overall reaction conversion, while that of BDMA decreases linearly. A modified terminal copolymerization model including the dependence of the reactivity ratios with the overall conversion was proposed. The application of this model provides a consistent fitting for the conversion of each comonomer during all reaction stages, even at high conversion values where large diffusion and topological restrictions for chain movements are present. Simulations show that the concentration of styrene units added to the copolymer increases with the overall reaction conversion, while that for the BDMA double bonds diminishes. Structures rich in homopolymerized styrene are predicted at later stages of the reaction.© 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010 相似文献
16.
Bismuthoniumylide‐initiated radical copolymerization of methylmethacrylate with styrene at 60 ± 0.2°C using dioxane as an inert solvent, follows ideal kinetics (Rp ∝ [ylide]0.5 [MMA]1.0 [sty]1.0), and yields alternating copolymer as evident from NMR spectroscopy. The values of reactivity ratios r1 and r2, calculated from Finemann–Ross method are 0.48 and 0.45, respectively. The system follows ternary molecular complex mechanism. The radical mode of polymerization has been confirmed by ESR spectroscopy and the effect of hydroquinone. The value of activation energy and k/kt are 65.0 KJ mol?1 and 2.5 × 10?5 l mole?1 s?1, respectively. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2774–2781, 2001 相似文献
17.
Poly(styrene-ran-styrenesulfonic acid) and poly(styrene-block-styrenesulfonic acid) with low polydispersity were prepared using nitroxide-mediated living radical polymerization technique. Random or block copolymerization of styrene and neopentyl p-styrenesulfonate smoothly proceeded by AIBN/2,2,5,5-tetramethyl-4-diethylphosphono-3-azahexane-3-nitroxide initiating system. Transformation of the sulfonate ester to sulfonic acid was carried out by the reaction with trimethylsilyl iodide or by thermolysis at 150 °C. Those polymers showed amphiphilic characters. 相似文献
18.
19.
20.
以三硫代碳酸二(α, α'-二甲基-α-乙酸)酯(BDATC)为链转移剂, 以苯乙烯、马来酸酐、丙烯酸为原料, 通过可逆加成-断裂链转移(RAFT)合成了双亲嵌段共聚物PSt-b-P(St-alt-MA)-b-PAA。通过选择性溶剂N, N-二甲基甲酰胺(DMF)诱导聚合物进行自组装, 利用紫外-可见光光度仪、纳米激光粒度仪详细研究了共聚物中亲疏水嵌段长度、初始浓度、体系pH值对聚合物自组装行为的影响。通过化学交联的方法制备得到了聚合物交联胶束, 利用透射电镜表征了形貌与尺寸, 研究明确了其形状和尺寸的稳定性。结果表明, 上述因素均会影响共聚物的自组装行为和自组装胶束的形态, 经乙二胺交联得到的交联自组装胶束平均粒径为145.4nm, 并具有良好的形状和尺寸稳定性。 相似文献