Gap‐coupled designs of star shape microstrip antennas for dual band and wide band circular polarized response

Gap‐coupled designs of star‐shape microstrip antennas for dual band and wide band circular polarized response are proposed. An angular displacement between fed and parasitic patches yields the optimum separation between patch orthogonal resonant modes to yield circular polarized response. In dual band design, axial ratio bandwidth of 8% is obtained whereas wideband design gives axial ratio bandwidth of nearly 29%. Proposed configurations exhibit broadside pattern with peak gain of more than 7 dBi. Resonant length formulations for star shape patch and for their dual and wide band designs are presented. They provide guidelines for redesigning similar antenna at different frequency.     

Novel wideband active microstrip antennas using distributed frequency multiplexers or de‐multiplexers

In this article, a novel approach is introduced for the design of wideband antennas in a specified frequency bandwidth (BW). In the proposed approach, the frequency BW is divided into some sub‐bands. Then, the narrowband antennas are designed for the consecutive frequency sub‐bands, and the antennas are connected together by a proposed active circuit, so that their frequency BWs combined. The proposed active circuit may be used to connect as many as antenna needed for the design. An active microstrip antenna is designed for the frequency BW of 4–10 GHz with a gain better than 5 dB by the proposed method. Fabrication and measurement results show the effectiveness of the proposed methodology. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

A new effective side length expression obtained using a modified tabu search algorithm for the resonant frequency of a triangular microstrip antenna

A new, very simple curve-fitting expression for the effective side length is presented for the resonant frequency of triangular microstrip antennas. It is obtained using a modified tabu search algorithm, and is useful for the computer-aided design (CAD) of microstrip antennas. The theoretical resonant frequency results obtained using this new effective side length expression are in very good agreement with the experimental results available in the literature. © 1998 John Wiley & Sons, Inc. Int J RF and Microwave CAE 8: 4–10, 1998.     

A high‐gain compact circularly polarized microstrip array antenna with simplified feed network

A broadband high‐gain circularly polarized (CP) microstrip antenna operating in X band is proposed. The circular polarization property is achieved by rotating four narrow band linearly polarized (LP) microstrip patch elements in sequence. Since the conventional series‐parallel feed network is not conducive to the miniaturization of the array, a corresponding simplified feed network is designed to realize the four‐way equal power division and sequential 90° phase shift. With this feed network, the impedance bandwidth (IBW) of the CP array is greatly improved compared with that of the LP element, while maintaining a miniaturized size. Then, parasitic patches are introduced to enhance the axial ratio bandwidth (ARBW). A prototype of this antenna is fabricated and tested. The size of proposed antenna is 0.93λ₀ × 0.93λ₀ × 0.017λ₀ (λ₀ denotes the space wavelength corresponding to the center frequency 10.4 GHz). The measured 10‐dB IBW and 3‐dB ARBW are 13.6% (9.8‐11.23 GHz), 11.2% (9.9‐11.07 GHz) respectively, and peak gain in the overlapping band is 9.8 dBi.     

Design and Analysis of Novel Antenna for Millimeter-Wave Communication

At present, the microwave frequency band bandwidth used for mobile communication is only 600 MHz. In 2020, the 5G mobile Communication required about 1 GHz of bandwidth, so people need to tap new spectrum resources to meet the development needs of mobile Internet traffic that will increase by 1,000 times in the next 10 years. Utilize the potentially large bandwidth (30∼300 GHz) of the millimeter wave frequency band to provide higher data rates is regarded as the potential development trend of the future wireless communication technology. A microstrip patch implementation approach based on electromagnetic coupling feeding is presented to increase the bandwidth of a dual-polarized millimeter-wave antenna. To extend the antenna unit's impedance bandwidth, coplanar parasitic patches and spatial parallel parasitic patches are used, and a 22 sub-array antenna is developed using paired inverse feed technology. The standing wave at the centre frequency of 37.5 GHz is less than 2 GHz. The antenna array's relative bandwidth is 6.13 percent, the isolation is >30 dB, the cross-polarization is −23.6 dB, and the gain is 11.5 dBi, according to the norm. The proposed dual-polarized microstrip antenna has the characteristics of wide frequency bandwidth, large port isolation, low cross-polarization, and high gain. The antenna performance meets the general engineering requirements of millimeter-wave dual-polarized antennas.     

Wideband circularly polarized dielectric resonator antenna coupled with meandered‐line inductor for ISM/WLAN applications

A new meandered‐line inductor fed wideband circularly polarized rectangular dielectric resonator antenna (DRA) with partial ground plane has been developed in this work. Meandered‐line inductor feed and partial ground plane are used for generation of orthogonal modes, hence circular polarization (CP) in DRA. By controlling the length of meandered‐line inductor, three different CP DRA have been designed for different wireless applications such as Wi‐MAX and WLAN/ISM 2400 band. Distribution of electric field inside rectangular DRA shows that all three antenna having TE_11δ mode. Finally, a lower frequency band application at 2.4 GHz (ISM) called here as Proposed Antenna, has been considered for fabrication. This designed antenna shows measured ?10 dB input impedance bandwidth of 20.67% and 3‐dB axial ratio bandwidth of 27.95% in broadside direction. All these three CP antennas (Antenna‐1 to Proposed Antenna) are showing stable gain and right hand circular polarization in broadside direction.     

Isolation enhancement between tightly spaced compact unidirectional patch‐antennas on multilayer EBG surfaces

In this article, ultracompact unidirectional patch antennas are used in different two‐antenna systems for biomedical applications at 5.2 GHz. Multilayer mushroom type electromagnetic bandgap (EBG) structures are designed as slow‐wave medium to reduce the size of the individual patch antennas to 0.1λ₀ by 0.18λ₀. Various techniques are investigated herein to improve antenna isolation for an enhanced Multiple‐Input Multiple‐Output (MIMO) performance. First, the coupling between 0.3λ₀‐spaced antennas is verified to occur dominantly through radiation and near‐field coupling between the patches rather than through substrate‐bound modes. Second, various configurations are proposed to suppress antenna coupling. These approaches include reorientation of the antennas and employment of parasitic radiators between the patches. A novel design is presented in which a unidirectional parasitic slot radiator on an EBG reflector is inserted between the antennas to decouple them. Measurement results confirm efficacy of these approaches in mitigating antenna coupling by more than 11 dB in the operating bandwidth of the antennas. The compact patch antennas maintain efficiency values of higher than 70%. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:30–38, 2015.     

Miniaturization and dual‐banding of an elevated slotted patch antenna using the novel dual‐reverse‐arrow fractal

A novel fractal geometry called dual‐reverse‐arrow fractal (DRAF) is introduced and compared with various versions of Koch fractals for application to triangular patch antennas. It is shown that DRAF results in the reduction of antenna size and tends to maintain its bandwidth. The presented DRAF is applied for the reduction of size of an elevated triangular patch antenna for the dual band operation in WLAN. This DRAF antenna has achieved 40% size reduction compared to a simple triangular patch antenna. For the provision of required bandwidth in the second frequency band (4.9‐5.9 GHz), a stepped U‐shaped slot is cut in the triangular patch. This antenna is more compact than similar antennas reported in the literature but maintains its fractional bandwidth (%25). The optimized design of the proposed DRAF antenna with air gap and slot is fabricated and tested, which verifies its expected specifications.     

Hybrid wideband dual‐cylindrical circularly polarized dielectric resonator antennas excited with S‐shaped microstrip feed for sub‐6 GHz frequency range

In this article, a hybrid microstrip fed dual‐cylindrical dielectric resonator antenna (dual‐CDRA) has been proposed for the sub‐6 GHz band application with a wide circular polarization band. The proposed hybrid microstrip feed cylindrical dielectric resonator antenna utilizes an S‐shaped microstrip feed line to excite fundamental HE_11δ like mode and hybrid mode in dual‐CDRAs. The presented antenna structures are acting as monopole antenna separately with 48.75% (3.88‐6.38 GHz) bandwidth whereas both radiators called dual‐CDRAs enhances the bandwidth up to 93.06% (2.16‐5.92 GHz) in addition with an axial ratio bandwidth of 15.2% (3.52‐4.1 GHz). The proposed antenna is applicable for WiMAX (3.4‐3.69 GHz), and WLAN application of 802.11d and 8.02.11e IEEE standard. For validation of simulated results, an antenna prototype has been fabricated and experimentally verified. A good agreement between simulation and measured results are obtained. The simulation results have been carried out by using Ansys HFSS 14.0 version software.     

Compact broadband circularly polarized slot‐patch antenna array

A simple design of circularly polarized slot‐patch antenna array with broadband operation and compact size is presented in this article. The antenna element consists of a circular slot and a semicircular patch, which are etched on both sides of a substrate. For the gain and axial ratio (AR) bandwidth enhancement, its array antennas are implemented in a 2 × 2 arrangement and fed by a sequential‐phase feeding network. The final 2 × 2 antenna array prototype with compact lateral dimension of 0.8λ_L × 0.8λ_L (λ_L is the lowest frequency within AR bandwidth) yielded a measured impedance bandwidth of 103.83% (2.76‐8.72 GHz) and a measured AR bandwidth of 94.62% (2.45‐6.85 GHz). The peak gain values within the AR bandwidth are from 2.85 to 8.71 dBi. A good agreement between the simulated and measured results is achieved. This antenna array is suitable for multiservice wireless systems covering WiMAX, WLAN and C‐band applications such as satellite communications.     

Broadband circularly polarized Z‐shaped dipole antenna with parasitic strips

A Z‐shaped dipole antenna with parasitic strips is proposed for wideband and unidirectional circular polarization operation in this article. The dipole arms are bent into L‐shape for circular polarization, and printed balun is used to achieve good impedance matching. To further extend the axial ratio bandwidth, two parasitic strips are employed to introduce an additional band of circularly polarized operation at the high frequency. Measured results demonstrate that the proposed antenna has a 10‐dB impedance bandwidth of 63.3% (1.64‐3.16 GHz) and a 3‐dB axial ratio bandwidth of 51.1% (1.72‐2.9 GHz). Stable radiation patterns with gain around 9 dBic along +z‐axis are also observed.     

Probe‐fed microstrip antennas loaded with very high‐permittivity ceramics

This article reports the feasibility study of miniaturizing probe‐fed microstrip patch antennas by dielectric loading. The loading materials are barium tetratitanate ceramics of very high dielectric constant (ε_r = 38, 80). It is shown that, simply through loading, the antenna sizes are greatly reduced; however, the antenna performances are deteriorated. For instance, the antenna gain becomes lower. Then enhancement of the antenna performances follows. A substrate–superstrate structure is used to recover the gain. Both the experiments and the finite‐difference time‐domain (FDTD) simulations demonstrate that the gain and impedance bandwidth can be retrieved such that they are comparable to those of conventional microstrip antennas loaded with low permittivity materials (ε_r < 3). © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

A compact monopolar patch antenna with bandwidth‐enhancement under dual‐mode resonance

A compact monopolar microstrip patch antenna (MPA) with enhanced‐bandwidth is proposed. In order to achieve the miniaturized patch, the zeroth‐order mode of the MPA instead of its higher‐order modes is employed at first by loading the shorting pin around the center of the patch. After that, a L‐shaped microstrip line with a shorting pin is introduced at the periphery of the patch radiator to excite an additional non‐radiative mode for bandwidth enhancement. In final, the proposed MPA is fabricated and measured. The results illustrate that the antenna generates an enhanced‐bandwidth of about 4.1% ranging from 2.39 to 2.49 GHz, which is significantly larger than that of the traditional MPA around 1%. Meanwhile, the dimensions of the radiating patch are obviously decreased down due to the employment of zeroth‐order mode, which are kept as small as about 0.17 λ₀ × 0.22 λ₀ × 0.026 λ₀ (λ₀ is the free‐space wavelength).     

Wideband linear microstrip array antenna with high efficiency and low side lobe level

In this letter, the design and fabrication of the linear microstrip array antenna by series fed are presented. The array antenna consists of 16 reflector slot‐strip‐foam‐inverted patch (RSSFIP) antennas. The gain and efficiency of the linear array antenna is 16.6 dBi and 61% at 10 GHz, respectively. The antenna has a bandwidth (BW) of 45% from 8.1 to 12.8 GHz (S₁₁ < ?10 dB) and side lobe level (SLL) of ?25.6 dB across the BW of 19.2% from 9.4 to 10.4 GHz. These are achieved by using a microstrip series fed with defected ground structure (DGS) to feed the patch array antenna. Good agreement is achieved between measurement and simulation results.     

Modeling and optimization of cylindrical antennas using the mode‐expansion method and genetic algorithms

For monopole antennas with cylindrically symmetric structures, a mode‐expansion method is highly time efficient, which is a realistic approach for integrating function‐optimization tools, such as genetic algorithms (GAs), in order to extract the best bandwidth property. In this article, a mode‐expansion method is used to simulate the impedance characteristics of the cylindrical antennas. As examples, two new types of monopole antennas are presented, one of which possesses a two‐step top‐hat structure while the other has an annulus around the stem. After the modeling scheme is examined for convergence and data validity, the associated optimization problem, with dimensions as decision variables, structural limitations as linear constraints, and desired bandwidth performance as an objective function, is solved using GAs. The effects of the geometric parameters on the impedance characteristics are investigated in order to demonstrate the optimality of the calculated solutions. Two optimized practical antennas are designed based on our numerical studies. One has a broad bandwidth of 3 GHz while the other shows a dual‐band property, which can satisfy the bandwidth requirements for both Bluetooth (2.45‐GHz band) and WLAN (5‐GHz band) systems. © 2005 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2005.     

Broadband gap‐coupled half‐hexagonal microstrip antenna fed by microstrip‐line resonator

Half‐hexagonal microstrip antenna (H‐HMSA) is a compact version of HMSA, as it resonates at the same fundamental mode frequency. In this article, a compact configuration of a single layer, broadband gap‐coupled H‐HMSA has been proposed. Gap‐coupled H‐HMSA is fed indirectly by a λ/2 microstrip‐line resonator. Broad bandwidth (BW) is achieved with an effective use of resonance introduced by λ/2 resonator and gap‐coupled half‐hexagonal radiating patches. A peak gain of 7.07 dBi and measured BW (S₁₁ ≤ ?10 dB) of 11.5% at the center frequency of 5.2 GHz have been achieved, which occupies a small volume of 0.023 λ₀³ including the ground plane. The radiation patterns remain in the broadside direction throughout the return loss BW. Simulated results of the proposed antenna configuration are experimentally validated with good agreement.     

Design of a tunable omnidirectional circularly polarized antenna based on VO2

In this article, a VO₂‐based tunable omnidirectional circularly polarized (CP) antenna is designed. The proposed antenna combines copper and metamaterial VO₂. By utilizing the characteristics of insulator‐metal phase transition of VO₂, we can change the length of the resonant branches to achieve tunable working bandwidth. The proposed antenna is composed of a modified floor loaded with VO₂ and copper resonant branches, a top patch with slits, and 14 shorting vias connecting the top path and bottom floor. Different from the traditional electric controlled antennas, antennas based on metamaterial VO₂ do not need to design complicated circuit structures and can be easily tailored by the external temperature (T). The simulated results illustrate that when T ≥ 68°C (state I), the proposed antenna has a 10‐dB impedance bandwidth of 15.9% (2.09‐2.45 GHz), and a 3‐dB axial ratio (AR) bandwidth of 23.4% (2.04‐2.58 GHz). When T < 68°C (state II), it has a bandwidth of 6.5% (2.38‐2.54 GHz) with S₁₁ below ?10 dB, and a bandwidth of 19.9% (2.39‐2.92 GHz) with AR below 3 dB.     

Metamaterial loads used in microstrip antenna for circular polarization: Review

The metamaterial elements and structures have been noticed for obtaining circular polarization (CP) while developing various procedures. In this paper, we have mentioned some of these cases and compared the metamaterial loads effect on antenna current distribution. We have classified them into four categories. The first case covers patch antenna based on composite right/left‐handed method, where the metamaterial has been used for changing the current distribution in the loop form. The second case has been achieved by radome and metasurface. In the third model, the interaction between feed and metamaterial load has been considered and the last case has been made by the metamaterial load with truncated structure. The metamaterial loading has been modeled based on Nicolson‐Ross or transmission/reflection techniques for extracting the permittivity and permeability. While the microstrip slot antennas are attractive for wider bandwidth, the truncated structure can change the current for achieving CP. Here, we have studied the antenna for wireless and WiMAX applications.     

Performance enhancement of nested hexagonal ring‐shaped compact multiband integrated wideband fractal antennas for wireless applications

In this paper, nested hexagonal ring‐shaped fractal antennas are designed and investigated which are different from each other in patch orientation. Initially, the multiband integrated wideband hexagonal nested ring antenna is designed (antenna‐I). To improve the multiband/wideband behavior, the patch orientation of antenna‐I is changed to ?60°/60° (antenna‐II), ?120°/120° (antenna‐III), and ?180°/180° (antenna‐IV). Antennas are designed on low cost FR‐4 glass epoxy substrate with relative permittivity of 4.4 and overall dimension 30 × 30 × 1.6 mm³. Comparison among antennas have been made and found that the antennas with negative orientation exhibit better results in terms of bandwidth, impedance matching, number of frequency bands, and gain. Designed antennas have been compared with each other and found that antennas‐II and III are better in performance as compared to antennas‐I and IV. Antenna‐II exhibits wider bandwidth of 1.26 (2.52‐3.78 GHz), 2.75 (4.03‐6.78 GHz), and 6.1 GHz (7.82‐13.92 GHz) with maximum gain of 7.14 dB. Similarly; antenna‐III exhibits the bandwidth of 340 MHz (1.92‐2.26 GHz), 820 MHz (3.04‐3.86 GHz), 4230 MHz (5.38‐9.61 GHz), and 3040 MHz (10.41‐13.45 GHz) with a maximum gain of 6.19 dB. Prototype of the designed antennas with satisfactory orientations are fabricated and tested for the validation of results. Simulated and measured results are also juxtaposed and observed in good agreement with each other. Antennas exhibit bidirectional and omnidirectional pattern in E‐plane and H‐plane, respectively, also the radiation efficiency of antennas are in acceptable range from 75% to 95%. Due to the wider bandwidth of designed antennas, they can be used for different wireless standards such as Advance Wireless Services AWS‐1, AWS‐2, AWS‐3, Wi‐MAX, WLAN, X‐band satellite communication, point‐to‐point wireless applications, ITU band, military satellite communication, television broadcasting, and military land and airborne systems.