The preparation and properties of segmented‐chain liquid crystalline polyesters based on 4,4′‐dihydroxybiphenyl by interfacial polycondensation

Thermotropic homopolyesters were prepared through interfacial polycondensation of 4,4′‐dihydroxybiphenyl with sebacoyl chloride. The optimal conditions of the process, in terms of the best yield, were studied through investigating the type of organic phase, amount of phase transfer agent, time and temperature of reaction, and volume ratio of aqueous to organic phase. The structure of the sample that had the best yield (53.235% ± 5%) was determined by means of elemental analysis, infrared spectra, and X‐ray. The effect of the molar ratio of the monomers on the yield and inherent viscosity was investigated. The inherent viscosity of the samples varied between 0.095 and 0.25 dL/g. The mesophase formed at elevated temperatures was studied by differential scanning calorimetry, polarized light microscopy, and depolarizing transmittance measurements. Our observations revealed that poly(4, 4′‐diphenyl sebacate), in contrast to previous reports that suggest this polymer is smectgenic, could produce nematic phase. It could be concluded that the chemical structure ordering of the poly(4, 4′‐diphenyl sebacate) plays a significant role in its liquid crystalline behavior. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1594–1606, 2005     

Crystallography and Structure–Property Relationships in 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐Dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐ Quaterphenyl (DODECA)

X‐ray crystallographic study of 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐quaterphenyl (DODECA) has been carried out. Nonbonding interatomic distances of oxygen atoms inside of all the nitro groups are shorter than those corresponding to the intermolecular contact radii for oxygen. By means of the DFT B3LYP/6‐31(d, p) method a difference of 136 kJ mol⁻¹ between the X‐ray and DFT structures of DODECA was found. The bearer of the highest initiation reactivity in its molecule in solid phase should be the nitro group at 4′′′‐position, in contrast to those at 2′‐ or 2″‐positions in its isolated molecule. The most reactive nitro group in the DODECA molecule can be well specified by the relationship between net charges on nitro groups and charges on their nitrogen atoms, both of them for the X‐ray structure. The ¹⁵N chemical shift, corresponding to this nitro group for the initiation by impact and shock, correlates very well with these shifts of the reaction centers of the other six “genuine” polynitro arenes.     

Interface formation of Ca with poly(p-phenylene α,α′-diphenyl vinylene) and poly(p-phenylene α-phenyl vinylene)

We have investigated the interface formation of Ca with poly(p-phenylene α,α′-diphenyl vinylene) (PPV-DP) and poly(p-phenylene α-phenyl vinylene) (PPV-P) using X-ray photoemission spectroscopy (XPS). Similarly to our earlier findings in metal/PPV interface formation, the O 1s peak shifted toward a lower binding energy as soon as Ca was deposited on to the polymers. This was accompanied by the formation of Ca? O, suggesting a chemical origin for the O 1s shift. By contrast, the C 1s peak shift toward a lower binding energy was observed relatively later, after about 4 Å of Ca deposition. At the same time, a new C 1s component became noticable at about ?1.5 eV relative to the initial C 1s peak. This component signifies the possibility of polymer disruption by the Ca atoms to form Ca? C species. The C 1s peak shift is attributed to Ca induced surface band bending and barrier formation as in the case of metal/PPV interface formation. The disruption of the polymer may also induce changes in the interface electronic states and contribute to the C 1s peak shift. From the intensity attenuation analysis, we conclude that the initial 15 Å of Ca overlayer is contaminated by the Ca? O and Ca? C species and the overlayer is pure beyond 15 Å of Ca coverage.     

Synthesis and characterization of a new family of photoactive liquid crystalline polyesters based on α‐methylstilbene

A liquid crystal polyester and two liquid crystal copolyesters containing α‐methylstilbene moieties and aliphatic or aromatic spacers in the backbone were synthesized in good yields, with the aim of using them for photosensitive microcapsule preparation. The synthesized polymers were fully characterized with respect to thermal stability, type of mesophase, molecular weight and E–Z photoisomerization. Combination of monomers with different structures allowed adjustment of the polymer characteristics such as degree of crystallinity and glass transition temperature, as verified using X‐ray diffraction, polarized optical microscopy and differential scanning calorimetry. Quantitative ¹H NMR and UV‐visible experiments were performed in order to investigate E–Z photoisomerization after photoirradiation at 364 nm. Finally, a membrane based on one of these polymers was prepared and it was found that its wettability increased on photoirradiation. © 2013 Society of Chemical Industry     

Copolycondensation of IPA/TPA,BPA, and 4,4′‐dihydroxydipehnylsulfone and 4,4′‐dicarboxydiphenylsulfone

Copolycondensations of IPA, TPA, bisphenol A (BPA), and several cimonomers were carried out to improve thermal properties, such as, the glass transition temperature (T_g) of the IPA/TPA (50/50)–BPA polyester. Among the comonomers examined, 4,4′‐Dihydroxydiphenylsulfone (BPS) and 4,4′‐Dicarboxydiphenylsulfone (DCDPS) having a strongly dipolar sulfonyl group in the chain were significantly effective. The favorable effect upon the T_gs was studied by varying the amounts of BPS and DCDPS incorporated into the copolymers. In the copolycondensation with BPS, two‐stage copolycondensation of BPA first and then BPS, the reverse order of reaction, and their spontaneous addition were examined to investigate the effect of distribution of the BPS unit segments in the copolymer upon the T_gs of the resulted copolymers. The distribution was briefly studied from distribution of the IPA/TPA‐BPA oligomers in the initial reaction using GPC. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 875–879, 2000     

A solid-state NMR study of aromatic polyimides based on 4,4′-diaminotriphenylmethane

The effect of different synthesis routes on the chemical and molecular order of polyimides based on 4,4′-diaminotripenylmethane (DA-TPM) and various aromatic dianhydrides (PI-TPM) was studied by solid-state carbon-13 nuclear magnetic resonance (¹³C-NMR). Polyimides were prepared by three different methods including a two-step procedure with either thermal or chemical imidization of precursor poly(amic acid)s (PAA) and one-step high-temperature polycondensation in phenolic solvents. Model compounds were also obtained and used in the assignment of the NMR signals. The NMR spectra for PI-TPMs obtained by one-step high-temperature polycondensation and—to a lesser extent—by thermal imidization of PAA, show sharper lines than those observed in the spectra of polymers prepared from PAA via chemical imidization. These differences are due mainly to the lower degree of ordering of the latter polyimides. WAXD patterns of polyimide films also indicated a less-ordered structure of the polymers resulting from the chemical imidization of PAA. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 1053–1064, 1998     

Crystallography and Structure–Property Relationships of 2,2″,4,4′,4″,6,6′,6″‐Octanitro‐1,1′ : 3′,1″‐Terphenyl (ONT)

An X‐ray crystallographic study of 2,2″,4,4′,4″,6,6′,6″‐octanitro‐1,1′ : 3′,1″‐terphenyl (ONT) has been carried out. The dihedral angles between benzene rings vary from 84.9° to 89.4°. Nonbinding interatomic distances of oxygen atoms inside all the nitro groups are shorter than the intermolecular contact radii for oxygen. On the basis of the DFT B3LYP/6‐31(d, p) method it was found that the difference between the X‐ray structure in the solid phase and DFT result for the gas phase is 98 kJ mol⁻¹, and the bearer of the highest initiation reactivity of the ONT molecule in the solid phase should be the nitro group at 4″‐position, in contrast to those at 4′‐ or 6′‐position that play this role in the isolated molecule. It has been stated that the nitro groups at the reaction centers of the ONT molecule are relatively well specified by their ¹⁵N NMR chemical shifts.     

Preparation and characterization of 3,3′,4,4′-benzophenone tetracarboxylic dianhydride-pyromellitic diahydride alternating polyimides

Four kinds of 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA)-pyromelliitic dianhydride (PMDA) alternating polyimide (BTDA-PMDA API) were obtained by reacting 1 mol BTDA with 2 mol diamines to form BTDA chain-extended diamines (BTDA CED), followed by the addition of 1 mol PMDA to yield the BTDA-PMDA alternating polyamic acids (BTDA-PMDA APA), and finally by imidizing them thermally. BTDA CED were characterized by elemental analysis, infrared (IR), and ¹H-NMR spectroscopy. The structures of BTDA-PMDA APA and BTDA-PMDA API were investigated by IR and ¹H-NMR spectroscopy, and their thermal properties and interfacial tension were also studied. Furthermore, the characteristic properties of BTDA-PMDA API were compared with their corresponding homopolyimides from BTDA (BTDA HPI) and from PMDA (PMDA HPI). It was found that the alternating condensation polymerization is an effective method to modify polyimides interfacial tension with a small influence on the thermal stability. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 1585–1593, 1997     

Genotoxicological Characterization of (±)cis-4,4′-DMAR and (±)trans-4,4′-DMAR and Their Association

The novel psychoactive substance (NPS) 4-Methyl-5-(4-methylphenyl)-4,5-dihydroxazol-2-amine (4,4′-DMAR) shows psychostimulant activity. Data on the acute toxicity of 4,4′-DMAR are becoming increasingly available, yet the long-term effects are still almost unknown. In particular, no data on genotoxicity are available. Therefore, the aim of the present study was to evaluate its genotoxic potential using the “In Vitro Mammalian Cell Micronucleus Test” (MNvit) on (±)cis-4,4′-DMAR and (±)trans-4,4′-DMAR and their associations. The analyses were conducted in vitro on human TK6 cells. To select suitable concentrations for MNvit, we preliminarily evaluated cytotoxicity and apoptosis. All endpoints were analysed by flow cytometry. The results reveal the two racemates’ opposite behaviours: (±)cis-4,4′-DMAR shows a statistically significant increase in micronuclei (MNi) frequency that (±)trans-4,4′-DMAR is completely incapable of. This contrast confirms the well-known possibility of observing opposite biological effects of the cis- and trans- isomers of a compound, and it highlights the importance of testing single NPSs that show even small differences in structure or conformation. The genotoxic capacity demonstrated stresses an additional alarming toxicological concern related to this NPS. Moreover, the co-treatments indicate that consuming both racemates will magnify the genotoxic effect, an aspect to consider given the unpredictability of illicit drug composition.     

Atom‐transfer radical polymerization of methyl methacrylate with α,α′‐dichloroxylene/CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine initiation system under microwave irradiation

The atom‐transfer radical polymerization (ATRP) of methyl methacrylate (MMA), using α,α′‐dichloroxylene as initiator and CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst was successfully carried out under microwave irradiation (MI). The polymerization of MMA under MI showed linear first‐order rate plots, a linear increase of the number‐average molecular weight with conversion, and low polydispersities, which indicated that the ATRP of MMA was controlled. Using the same experimental conditions, the apparent rate constant (k) under MI (k = 7.6 × 10^?4 s^?1) was higher than that under conventional heating (k = 5.3 × 10^?5 s^?1). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2189–2195, 2004     

Cationic copolymers of α,β‐poly‐(N‐2‐hydroxyethyl)‐DL‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy): synthesis and characterization

In the present study the derivatization of two water‐soluble synthetic polymers, α,β‐poly(N‐2‐hydroxyethyl)‐DL ‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy), with glycidyltrimethylammonium chloride (GTA) is described. This reaction permits the introduction of positive charges in the macromolecular chains of PHEA and PAHy in order to make easier the electrostatic interaction with DNA. Different parameters affect the reaction of derivatization, such as GTA concentration and reaction time. PHEA reacts partially and slowly with GTA; on the contrary the reaction of PAHy with GTA is more rapid and extensive. The derivatization of PHEA and PAHy with GTA is a convenient method to introduce positive groups in their chains and it permits the preparation of interpolyelectrolyte complexes with DNA. © 2000 Society of Chemical Industry     

Quasi‐alternating polyesteramides from ε‐caprolactone and α‐amino acids

Glycine‐ɛ‐caprolactone‐based and α‐alanine‐ɛ‐caprolactone‐based polyesteramides with a strong tendency to form alternating sequences (degree of randomness = 1.64 and 1.31) were synthesized by melt polycondensation of intermediate hydroxy‐ and ethyl ester‐terminated amides. These intermediates were synthesized by the reaction of equimolar amounts of ɛ‐caprolactone and glycine or L‐α‐alanine ethyl esters in mild conditions. The structure and microstructure of these polyesteramides are discussed on the basis of an in‐depth nuclear magnetic resonance study. Both polyesteramides are semi‐crystalline, but the glycine‐based one presents the highest melting enthalpy. This polyesteramide also exhibits higher Young's modulus and stress at break than its α‐ and β‐alanine counterparts. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44220.     

Preparation and properties of organo‐soluble polyimides based on 4,4′‐diamino‐3,3‐dimethyldiphenylmethane and conventional dianhydrides

4,4′‐Diamino‐3,3′‐dimethyldiphenylmethane was used to prepare polyimides in an attempt to achieve good organo‐solubility and light color. Polyimides based on this diamine and three conventional aromatic dianhydrides were prepared by solution polycondensation followed by chemical imidization. They possess good solubility in aprotonic polar organic solvents such as N‐methyl 2‐pyrrolidone, N,N‐dimethyl acetamide, and m‐cresol. Polyimide from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and diphenylether‐3,3′,4,4′‐tetracarboxylic acid dianhydride is even soluble in common solvents such as tetrahydrofuran and chloroform. Polyimides exhibit high transmittance at wavelengths above 400 nm. The glass transition temperature of polyimide from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and pyromellitic dianhydride is 370°C, while that from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and diphenylether‐3,3′,4,4′‐tetracarboxylic acid dianhydride is about 260°C. The initial thermal decomposition temperatures of these polyimides are 520–540°C. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1299–1304, 1999     

Insensitive High Explosives II: 3,3′‐Diamino‐4,4′‐azoxyfurazan (DAAF)

This paper reviews the synthesis, properties, performance, and safety of the insensitive explosive 3,3′‐diamino‐4,4′‐azoxyfurazan (DAAF, C₄H₄N₈O₃), CAS‐No. [78644‐89‐0], and 18 formulations based on it. Though having a moderate crystal density only, DAAF offers high positive heat of formation and hence superior performance when compared with TATB. It is friction and impact insensitive but is more sensitive to shock than TATB and has an exceptionally small critical diameter and performs very well at low temperatures unlike other insensitive explosives. 39 references to the public domain are given. For Part I see Ref. [1].     

Ruthenium‐Catalyzed Oxidation of the Porphyrin β,β′‐Pyrrolic Ring: A General and Efficient Approach to Porpholactones

We describe an efficient ruthenium‐catalyzed oxidation of the β,β′‐pyrrolic ring on the porphyrin periphery. Through the conversion of a β,β′‐double bond to a lactone moiety, the direct preparation of porpholactones from porphyrins is achieved, which previously suffered from needing toxic reagents, multiple synthetic steps and low yields. The generality of this method has been investigated with various porphyrins with different electronic and steric effects, even some metalloporphyrins, and so represents a general and efficient approach for the synthesis of the intriguing porpholactone derivatives.     

Direct Decarboxylative Alkynylation of α,α‐Difluoroarylacetic Acids under Transition Metal‐Free Conditions

An efficient and generally applicable protocol for decarboxylative coupling of α,α‐difluoroarylacetic acids with ethynylbenziodoxolone (EBX) reagents has been developed, affording α,α‐difluoromethylated alkynes bearing various functional groups in moderate to excellent yields. Remarkably, this potassium persulfate (K₂S₂O₈)‐promoted reaction employs water as solvent under transition metal‐free conditions, thus providing a green synthetic approach to α,α‐difluoromethylated alkynes.

     

Investigation of the Solubility of 3,4‐Diaminofurazan (DAF) and 3,3′‐Diamino‐4,4′‐azoxyfurazan (DAAF) at Temperatures Between 293.15 K and 313.15 K

The solubilities of 3,4‐diaminofurazan (DAF) and 3,3′‐diamino‐4,4′‐azoxyfurazan (DAAF) were investigated in water, dichloromethane, acetonitrile, ethyl acetate, methanol, and acetone between 293.15 K and 313.15 K. The solubility was determined by high‐pressure liquid chromatography with ultraviolet detection. The solubilities of DAF and DAAF are increased with the increasing of temperature in all solvents studied. The enthalpy of solution in each solvent was calculated according to van't Hoff Equation.     

N,N′‐Dioxide‐Magnesium Ditriflate Complex‐Catalyzed Asymmetric α‐Hydroxylation of β‐Keto Esters and β‐Keto Amides

The highly catalytic asymmetric α‐hydroxylation of 1‐tetralone‐derived β‐keto esters and β‐keto amides using tert‐butyl hydroperoxide (TBHP) as the oxidant was realized by a chiral N,N′‐dioxide‐magnesium ditriflate [Mg(OTf)₂] complex. A series of corresponding chiral α‐hydroxy dicarbonyl compounds was obtained in excellent yields (up to 99%) with excellent enantioselectivities (up to 98% ee). The products were easily transformed into useful building blocks and the precursor of daunomycin was achieved in an asymmetric catalytic way for the first time.     

Reaction kinetics and thermal properties of epoxidised cresol novolac/4,4′‐diglycidyl (3,3′,5,5′‐tetramethylbiphenyl) epoxy resin composite cured with aromatic diamine

A series of novel composites based on different ratios of epoxidised cresol novolac (ECN) and 4,4′‐diglycidyl(3,3′,5,5′‐tetramethylbiphenyl) epoxy resin (TMBP) have been prepared with the curing agent 4,4′‐methylenediamine (DDM) and 4,4′‐diaminodiphenylsulfone (DDS), respectively. The investigation of cure kinetics was performed by differential scanning calorimetry using an isoconversional method. The high thermal stabilities of the cured samples were also studied by thermogravimetric analysis. In addition, no phase separation was observed for cured ECN/DDM and ECN/DDS blending with different amounts of TMBP by dynamic mechanical analysis and scanning electron microscopy. Moreover, the cured systems also exhibited excellent impact properties and low moisture absorption. All the results indicate that the ECN/TMBP/DDM and ECN/TMBP/DDS systems are promising materials in electronic packaging. Copyright © 2011 Society of Chemical Industry     

Structural characterization of α‐ and β‐nucleated isotactic polypropylene

Modification of isotactic polypropylene (iPP) with two nucleation agents, namely 1,3:24‐bis(3,4‐dimethylobenzylideno) sorbitol (DMDBS) (α‐nucleator) and N, N′‐dicyclohexylo‐2,6‐naphthaleno dicarboxy amide (NJ) (β‐nucleator), leads to significant changes of the structure, morphology and properties. Both nucleating agents cause an increase in the crystallization temperature. The efficiency determined in a self‐nucleation test is 73.4 % for DMDBS and 55.9 % for NJ. The modification with NJ induces the creation of the hexagonal β‐form of iPP. The addition of DMDBS lowers the haze of iPP while the presence of NJ increases the haze. Copyright © 2004 Society of Chemical Industry