The totally miscible in ternary hydrogen‐bonded polymer blend of poly(vinyl phenol)/phenoxy/phenolic

The individual binary polymer blends of phenolic/phenoxy, phenolic/poly(vinyl phenol) (PVPh), and phenoxy/PVPh have specific interaction through intermolecular hydrogen bonding of hydroxyl–hydroxyl group to form homogeneous miscible phase. In addition, the miscibility and hydrogen bonding behaviors of ternary hydrogen bond blends of phenolic/phenoxy/PVPh were investigated by using differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy, and optical microscopy. According to the DSC analysis, every composition of the ternary blend shows single glass transition temperature (T_g), indicating that this ternary hydrogen‐bonded blend is totally miscible. The interassociation equilibrium constant between each binary blend was calculated from the appropriate model compounds. The interassociation equilibrium constant (K_A) of each individually binary blend is higher than any self‐association equilibrium constant (K_B), resulting in the hydroxyl group tending to form interassociation hydrogen bond. Photographs of optical microscopy show this ternary blend possess lower critical solution temperature (LCST) phase diagram. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Miscibility and morphology in crystalline/amorphous blends of poly(caprolactone)/poly(4-vinylphenol) as studied by DSC, FTIR, and C solid state NMR

The miscibility and morphology of poly(caprolactone) (PCL) and poly (4-vinylphenol) (PVPh) blends were investigated by using differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy and ¹³C solid state nuclear magnetic resonance (NMR) spectroscopy. The DSC results indicate that PCL is miscible with PVPh. FTIR studies reveal that hydrogen bonding exists between the hydroxyl groups of PVPh and the carbonyl groups of PCL. ¹³C cross polarization (CP)/magic angle spinning (MAS)/dipolar decoupling (DD) spectra of the blends show a 1 ppm downfield shifting of ¹³C resonance of PVPh hydroxyl-substituted carbons and PCL carbonyl carbons with increasing PCL content. Both FTIR and NMR give evidence of inter-molecular hydrogen bonding within the blends. The proton spin-lattice relaxation in the laboratory frame, T₁(H), and in the rotating frame, T_1ρ(H), were studied as a function of the blend composition. The T₁(H) results are in good agreement with thermal analysis; i.e. the blends are completely homogeneous on the scale of 50-80 nm. The T_1ρ(H) results indicate that PCL in the blends has both crystalline and amorphous phases. The amorphous PCL phase is miscible with PVPh, but the PCL crystal domain size is probably larger than the spin-diffusion path length within the T_1ρ(H) time-frame, i.e. larger than 2-4 nm. The mobility differences between the crystalline and amorphous phases of PCL are clearly visible from the T_1ρ(H) data.     

Miscible blends containing bacterial poly(3‐hydroxyvalerate) and poly(p‐vinyl phenol)

The miscibility of poly(3‐hydroxyvalerate) (PHV)/poly(p‐vinyl phenol) (PVPh) blends has been studied by differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy. The blends are miscible as shown by the existence of a single glass transition temperature (T_g) and a depression of the equilibrium melting temperature of PHV in each blend. The interaction parameter was found to be −1.2 based on the analysis of melting point depression data using the Nishi–Wang equation. Hydrogen‐bonding interactions exist between the carbonyl groups of PHV and the hydroxyl groups of PVPh as evidenced by FTIR spectra. The crystallization of PHV is significantly hindered by the addition of PVPh. The addition of 50 wt % PVPh can totally prevent PHV from cold crystallization. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 383–388, 1999     

Reexamination of the miscibility of stereoregular poly(methyl methacrylate) with poly(vinyl phenol)

Previously, isotactic, atactic, and syndiotactic poly(methyl methacrylates) (PMMAs) (designated as iPMMA, aPMMA, and sPMMA) were mixed with poly(vinyl phenol) (PVPh) separately in tetrahydrofuran (THF) to make three polymer blend systems. According to calorimetry data, iPMMA was found to be miscible with PVPh; however, partial miscibility or immiscibility was found between aPMMA (or sPMMA) and PVPh. According to the article by C. J. T. Landry and D. M. Teegarden, Macromolecules, 1991, 24, 4310, THF is the reason for causing aPMMA and PVPh to phase separate, but 2‐butanone instead produces miscible blends. Therefore, in this article these three polymer systems were investigated again using 2‐butanone as solvent. Films were prepared under specific conditions to minimize the effect of aggregation in PMMA. The formation of hydrogen bonding between PMMA and PVPh and the attendant changes in the aggregation of PMMA segments were determined in the solid states by means of FTIR. Based on the results of calorimetry, iPMMA and aPMMA were found to be miscible with PVPh. For iPMMA/PVPh blends, different degrees of hydrogen bonding were observed based on DSC data and FTIR spectra when compared to previous study. An elevation of the glass transition temperatures (T_gs) of aPMMA/PVPh blends above weight average was detected and the T_g values were fitted well by the Kwei equation. But partial miscibility was still found between sPMMA and PVPh on account of the observation of two T_gs in most compositions. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1425–1431, 2002     

Poly(para‐dioxanone)/poly(D,L‐lactide) blends compatibilized with poly(D,L‐lactide‐co‐para‐dioxanone)

The effect of poly(D ,L ‐lactide‐co‐para‐dioxanone) (PLADO) as the compatibilizer on the properties of the blend of poly(para‐dioxanone) (PPDO) and poly(D ,L ‐lactide) (PDLLA) has been investigated. The 80/20 PPDO/PDLLA blends containing from 1% to 10% of random copolymer PLADO were prepared by solution coprecipitation. The PLADO component played a very important role in determining morphology, thermal, mechanical, and hydrophilic properties of the blends. Addition of PLADO into the blends could enhance the compatibility between dispersed PDLLA phase and PPDO matrix; the boundary between the two phases became unclear and even the smallest holes were not detected. On the other hand, the position of the T_g was composition dependent; when 5% PLADO was added into blend, the T_g distance between PPDO and PDLLA was shortened. The blends with various contents of compatibilizer had better mechanical properties compared with simple PPDO/PDLLA binary polymer blend, and such characteristics further improved as adding 5% random copolymers. The maximum observed tensile strength was 29.05 MPa for the compatibilized PPDO/PDLLA blend with 5% PLADO, whereas tensile strength of the uncompatibilized PPDO/PDLLA blend was 14.03 MPa, which was the lowest tensile strength. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Miscibility enhancement on the immiscible poly (vinyl pyrrolidone) and poly (ethyl methacrylate) with poly (vinyl phenol)

The miscibility behavior of ternary blends of poly (vinyl phenol) (PVPh)/poly (vinyl pyrrolidone) (PVP)/poly (ethyl methacrylate) (PEMA) was investigated mainly with calorimetry. PVPh is miscible with both PVP and PEMA on the basis of the single T_g observed over the entire composition range. FTIR was used to study the hydrogen bonding interaction between the hydroxyl group of PVPh and the carbonyl group of PVP and PEMA at various compositions. Furthermore, the addition of PVPh is able to enhance the miscibility of the immiscible PVP/PEMA and eventually transforms it into a miscible blend, especially when the ratio between PVP/PEMA is 3:1, probably because of favorable physical interaction. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1205–1213, 2006     

Thermal Property and Hydrogen Bonding in Blends of Poly(vinylphenol) and Poly(hydroxylether of Bisphenol A)

The thermal property and hydrogen bonding in polymer blends of poly(vinylphenol) (PVPh) and poly(hydroxylether of bisphenol A) (phenoxy) were investigated by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and solid-state nuclear magnetic resonance (NMR). This PVPh/phenoxy blend shows single composition-dependent glass transition temperature over the entire compositions, indicating that the hydrogen bonding exists between the hydroxyl of PVPh and hydroxyl of phenoxy. The negative T _g deviation of the PVPh/phenoxy blend indicates the strong intermolecular hydrogen-bonding interaction. The inter-association constant for the PVPh/phenoxy blend is significantly higher than self-association constants of PVPh and phenoxy, revealing that the tendency toward hydrogen bonding between PVPh and phenoxy is more favorable than the intra-hydrogen bonding of the PVPh and phenoxy in the blend.     

Miscibility with positive deviation in Tg-composition relationship in blends of poly(2-vinyl pyridine)-block-poly(ethylene oxide) and poly(p-vinyl phenol)

Phase behavior and miscibility with positive deviation from linear T_g-composition relationship in a copolymer/homopolymer blend system, poly(2-vinyl pyridine)-block-poly(ethylene oxide) (P2VP-b-PEO)/poly(p-vinyl phenol) (PVPh), were investigated by differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR) and solid-state ¹³C nuclear magnetic resonance (¹³C NMR), optical microscopy (OM), and scanning electron microscopy (SEM). Optical and electron microscopy results as well as NMR proton spin-lattice relaxation times in laboratory frame () all confirmed the miscibility as judged by the T_g criterion using DSC. In comparison to the literature result on a homopolymer/homopolymer blend of P2VP/PVPh, fitting with the Kwei equation on the T_g-composition relationship for the block-copolymer/homopolymer blend of P2VP-b-PEO/PVPh blend system yielded a smaller q value (q = 120) for P2VP-b-PEO/PVPh than that for P2VP/PVPh blend (q = 160). The FT-IR and ¹³C NMR results revealed hydrogen-bonding interactions between the pendant pyridine group of P2VP-b-PEO and phenol unit in PVPh, which is responsible for the noted positive deviation of the T_g-composition relationship. Comparison of the shifts of hydroxyl IR absorbance band, reflecting the average strength of H-bonding, indicates a decreasing order of P2VP/PVPh > P2VP-b-PEO/PVPh > PEO/PVPh blends. The PEO block in the copolymer segment tends to defray the interaction strength in the P2VP-b-PEO/PVPh blends because of relative weaker interaction between PEO and PVPh than that between P2VP and PVPh pairs. A comparative ternary (P2VP/PEO)/PVPh blend was also studied as the controlling experiments for comparison to the P2VP-b-PEO/PVPh blend. The thermal behavior and interaction strength in (P2VP/PEO)/PVPh ternary blends are discussed with those in the P2VP-b-PEO/PVPh copolymer/homopolymer blend.     

Miscibility of poly(1-vinylimidazole)/ poly(p-vinylphenol) blends

Summary Blends of poly(1-vinylimidazole) (PVI) and poly(p-vinylphenol) (PVPh) were cast from ethanol or N,N-dimethylformamide (DMF). All the blends are miscible based on the single glass transition temperature (T_g) criterion. The T_g values of the blends are higher than those calculated from linear additivity rule. Blends cast from ethanol show a larger positive deviation than those cast from DMF. The T_g-composition curves can be fitted by the Kwei equation. FTIR studies show the existence of a strong hydrogen-bonding interaction between PVI and PVPh.     

Miscibility and interactions in blends and complexes of poly(4-methyl-5-vinylthiazole) with proton-donating polymers

The miscibility and interactions in blends and complexes of poly(4-methyl-5-vinylthiazole) (PMVT) with poly(p-vinylphenol) (PVPh), poly(acrylic acid) (PAA) and poly(vinylphosphonic acid) (PVPA) were studied. PMVT formed complexes with PVPA but not with PVPh and PAA. Each of the blends of PMVT with PVPh and PAA showed a single glass transition temperature (T_g), indicating miscibility. Fourier-transform infrared spectroscopic and X-ray photoelectron spectroscopic studies provided the existence of interactions in the PMVT blends and complexes. The XPS studies indicated that the thiazole nitrogen atoms are involved in hydrogen-bonding interactions with PVPh and PAA, and ionic interactions with PVPA. The sulfur atoms of PMVT also interact with PVPh, PAA and PVPA.     

Effect of the tacticity of poly(methyl methacrylate) on the phase diagram of its ternary blends

Previously, isotactic and atactic poly(methyl methacrylates) (PMMAs) were found to be miscible with poly(vinyl phenol) (PVPh) and poly(hydroxy ether of bisphenol‐A) (phenoxy) because all the prepared films were transparent and showed composition‐dependent glass transition temperatures (T_g's). However, syndiotactic PMMA was immiscible with PVPh because most of the cast films had two T_g's. On the contrary, syndiotactic PMMA was still miscible with phenoxy. According to our preliminary results, PVPh and phenoxy are not miscible. Also to our knowledge, nobody has reported any results concerning the effect of the tacticity of PMMA on its ternary blend containing PVPh and phenoxy. The miscibility of a ternary blend consisting of PVPh, phenoxy, and tactic PMMA was thus investigated and reported in this article. Calorimetry was used as the principal tool to study miscibility. An approximate phase diagram of the ternary blends containing different tactic PMMA was established, probably for the first time, based on differential scanning calorimetry data. Immiscibility was found in most of the studied ternaries but a slight difference due to the effect of tacticity of PMMA was definitely observed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2720–2726, 2002     

Crystallization, spherulite growth, and structure of blends of crystalline and amorphous poly(lactide)s

The effects of incorporated amorphous poly(dl-lactide) (PDLLA) on the isothermal crystallization and spherulite growth of crystalline poly(l-lactide) (PLLA) and the structure of the PLLA/PDLLA blends were investigated in the crystallization temperature (T_c) range of 90-150 °C. The differential scanning calorimetry results indicated that PLLA and PDLLA were phase-separated during crystallization. The small-angle X-ray scattering results revealed that for T_c of 130 °C, the long period associated with the lamellae stacks and the mean lamellar thickness values of pure PLLA and PLLA/PDLLA blend films did not depend on the PDLLA content. This finding is indicative of the fact that the coexisting PDLLA should have been excluded from the PLLA lamellae and inter-lamella regions during crystallization. The decrease in the spherulite growth rate and the increase in the disorder of spherulite morphology with an increase in PDLLA content strongly suggest that the presence of a very small amount of PDLLA chains in PLLA-rich phase disturbed the diffusion of PLLA chains to the growth sites of crystallites and the lamella orientation. However, the wide-angle X-ray scattering analysis indicated that the crystalline form of PLLA remained unvaried in the presence of PDLLA.     

Miscibility and intermolecular specific interactions in blends of poly(hydroxyether of bisphenol A) and poly(4-vinyl pyridine)

The blends of poly(hydroxyether of bisphenol A) (phenoxy) with poly(4-vinyl pyridine) (P4VPy) were investigated by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and high-resolution solid-state nuclear magnetic resonance (NMR) spectroscopy. The single, composition-dependent glass transition temperature (T_g) was observed for each blend, indicating that the system is completely miscible. The sigmoid T_g-composition relationship is characteristic of the presence of the strong intermolecular specific interactions in the blend system. FTIR studies revealed that there was intermolecular hydrogen bonding in the blends and the intermolecular hydrogen bonding between the pendant hydroxyl groups of phenoxy and nitrogen atoms of pyridine ring is much stronger than that of self-association in phenoxy. To examine the miscibility of the system at the molecular level, the high resolution ¹³C cross-polarization (CP)/magic angle spinning (MAS) together with the high-power dipolar decoupling (DD) NMR technique was employed. Upon adding P4VPy to the system, the chemical shift of the hydroxyl-substituted methylene carbon resonance of phenoxy was observed to shift downfield in the ¹³C CP/MAS spectra. The proton spin-lattice relaxation time T₁(H) and the proton spin-lattice relaxation time in the rotating frame T_1ρ(H) were measured as a function of the blend composition. In light of the proton spin-lattice relaxation parameters, it is concluded that the phenoxy and P4VPy chains are intimately mixed on the scale of 20-30 Å.     

A study of blending and complexation of poly(acrylic acid)/poly(vinyl pyrrolidone)

Poly(acrylic acid) (PAA) and poly(vinyl pyrrolidone) (PVP) were chosen to prepare polymer complex and blends. The complex was prepared from ethanol solution and the blends were prepared from 1-methyl-2-pyrrolidone solution. DSC results show that the T_gs of the PAA/PVP blends lie between those of the two constituent polymers, whereas T_g of the PAA/PVP complex is higher than both blends and the two constituent polymers. TGA results show that degradation temperature, T_d, of PAA increases upon adding PVP in the blend, but thermal stability of the complex is higher than that of the blends as reflected by the higher T_d. Both FTIR and high-resolution solid state NMR show strong hydrogen bonding between PAA and PVP by showing significant chemical shift. The T_1ρ(H) measurement shows that the homogeneity scale for the blend is at ∼20 Å and that for the complex is ∼15 Å.     

Miscible blends of poly(4‐vinyl phenol)/poly (trimethylene terephthalate)

A new miscible blend of all compositions comprising poly(4‐vinyl phenol) (PVPh) and poly(trimethylene terephthalate) (PTT) was discovered and reported. The blends exhibit a single composition‐dependent glass transition and homogeneous phase morphology, with no lower critical solution temperature (LCST) behavior upon heating to high temperatures. Interactions and spherulite growth kinetics in the blends were also investigated. The Flory–Huggins interaction parameter (χ₁₂) and interaction energy density (B) obtained from analysis of melting point depression are negative (χ₁₂ = ?0.74 and B = ?32.49 J cm^?3), proving that the PVPh/PTT blends are miscible over a wide temperature range from ambient up to high temperatures in the melt state. FTIR studies showed evidence of hydrogen‐bonding interactions between the two polymers. The miscibility of PVPh with PTT also resulted in a reduction in spherulite growth rate of PTT in the miscible blend. The Lauritzen–Hoffman model was used to analyze the spherulite growth kinetics, which showed a lower fold‐surface free energy (σ_e) of the blends than that of the neat PTT. The decrease in the fold‐surface free energy has been attributed to disruption of the PTT lamellae exerted by PVPh in an intimately interacted miscible state. Copyright © 2004 Society of Chemical Industry     

Aging of poly(lactide)/poly(ethylene glycol) blends. Part 2. Poly(lactide) with high stereoregularity

Blending poly(ethylene glycol) (PEG) with poly(lactide) (PLA) decreases the T_g and improves the mechanical properties. The blends have lower modulus and increased fracture strain compared to PLA. However, the blends become increasingly rigid over time at ambient conditions. Previously, it was demonstrated that a PLA of lower stereoregularity was miscible with up to 30 wt% PEG. Aging was due to slow crystallization of PEG from the homogeneous amorphous blend. Crystallization of PEG depleted the amorphous phase of PEG and gradually increased the T_g until aging essentially ceased when T_g of the amorphous phase reached the aging temperature. In the present study, this aging mechanism was tested with a crystallizable PLA of higher stereoregularity. Changes in thermal transitions, solid state structure, and mechanical properties were examined over time. Blends with up to 20 wt% PEG were miscible. Blends with 30 wt% PEG could be quenched from the melt to the homogenous amorphous glass. However, this composition phase separated at ambient temperature with little or no crystallization. Changes in mechanical properties during phase separation reflected increasing rigidity of the continuous PLA-rich phase as it became richer in PLA. Construction of a phase diagram for blends of higher stereoregular PLA with PEG was attempted.     

Miscibility and phase behavior in blends of phenolphthalein poly(ether sulfone) and poly(hydroxyether of bisphenol A)

Miscibility and phase behavior in the blends of phenolphthalein poly(ether sulfone) (PES-C) with poly(hydroxyether of bisphenol A) (PH) were investigated by means of differential scanning calorimetry (DSC), high resolution solid state nuclear magnetic resonance spectroscopy (NMR) and Fourier transform infrared spectroscopy (FTIR). It was found that the homogeneity of the as-prepared blends depended on the solvents used; N,N-dimethylformamide (DMF) provided the segmental mixing for PH and PES-C, which is confirmed by the behavior of single, composition-dependent glass transition temperatures (T_g's). To examine the homogeneity of the blends at the molecular level, the proton spin-lattice relaxation times in the rotating frame T_1ρ(H) were measured via ¹³C CP/MAS NMR spectroscopy as a function of blend composition. In view of the T_1ρ(H) values, it is concluded that the PH and PES-C chains are intimately mixed on the scale of 20-30 Å. FTIR studies indicate that there were the intermolecular specific interactions in this blends, involved with the hydrogen-bonding between the hydroxyls of PH and the carbonyls of PES-C, and the strength of the intermolecular hydrogen bonding is weaker than that of PH self-association. At higher temperature, the PH/PES-C blends underwent phase separation. By means of thermal analysis, the phase boundaries of the blends were determined, and the system displayed the lower critical solution temperature behavior. Thermogravity analysis (TGA) showed that the blends exhibited the improved thermal stability, which increases with increasing PES-C content.     

Uniaxial orientation and tensile properties of poly(ethylene terephthalate)/poly(ethylene-2,6-naphthalate) blends

Amorphous films of poly(ethylene terephthalate)/poly(ethylene-2,6-naphthalate) (PET/PEN) blends with different blend ratios were uniaxially drawn by solid-state coextrusion and the structure development during solid state deformation was studied. As-prepared blends showed two T_gs. The lower T_g was ∼72 °C, independent of the blend ratio. In contrast, the higher T_g increased with increasing PEN content. Thus, the coextrusion was carried out around the higher T_g of the sample. At a given draw ratio of 5, which was close to the achievable maximum draw ratio, the tensile strength of the drawn samples from the initially amorphous state increased gradually with increasing PEN content. On the other hand, the tensile modulus was found to decrease initially, reaching a minimum at 40-60 wt% PEN, and then increased as the PEN content increased. The results indicate that we can get the drawn films with a moderate tensile modulus and a high tensile strength. The drawn samples from the blends containing 40-60 wt% of PEN showed a maximum elongation at break, and a maximum thermal shrinkage around 100 °C. Also, the degree of stress-induced crystallinity showed a broad minimum around the blend ratio of 50% of PEN. These morphological characteristics explained well the effects of blend ratio on the tensile modulus and strength of drawn PET/PEN blend films.     

Preparation and characterization of novolac type phenolic resin blended with poly(dimethylsiloxane adipamide)

Phenolic resin/poly(dimethylsiloxane adipamide) (PDMSA) blends, which have been prepared, show miscibility due to intermolecular H‐bonding existing between phenolic resin and the PDMSA. The specific H‐bonding of novolac type phenolic/PDMSA blends was characterized by means of glass transition temperature behavior and Fourier Transform Infrared Spectroscopy (FTIR). The strength of intermolecular H‐bonding within the phenolic blend is a function of the H‐bonded group of the PDMSA modifier and corresponds to the deviation glass transition temperature (ΔT_g). Phenolic/PDMSA blends were completely miscible, as confirmed by the T_g study. The FTIR result is in good agreement with the inference from T_g behavior. The char yield of phenolic/PDMSA corresponds to the phenolic resin content. The molecular mobility of phenolic/PDMSA blends increases with PDMSA content in the phenolic‐rich region. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 984–992, 2002     

Glass transition behavior and miscibility in blends of poly(vinyl p-phenol) with two homologous aliphatic polyesters

New miscible blend systems comprised of poly(4-vinyl phenol) (PVPh) and a homologous series of polyesters of different CH₂/CO ratios (from 4.5 to 7) was discovered. Miscibility has been confirmed using differential scanning calorimetry, Fourier-transformed infrared spectroscopy, and scanning electron microscopy. The PVPh/polyesters blends investigated exhibited a single composition-dependent glass transition and homogeneous phase morphology, and they similarly exhibited a cusp in the T_g-composition relationships. This work further extended the range of aliphatic polyesters that are known to be miscible with PVPh. The Flory-Huggins interaction parameter (χ₁₂) or energy density (B) obtained from analysis of melting point depression for PVPh/PEAz and PVPh/PHS blends are of negative values. More interestingly, the specific interactions in the PVPh/polyester blends change with the corresponding different structures in the polyester component. For the PVPh/PHS blend whose polyester constituent possesses a lower carbonyl density in the main chain (average CH₂/CO ratio=7), the energy density B was found to be −1.17 cal cm⁻³. This value is significantly lower than those for either the PVPh/PEAz (CH₂/CO=4.5) blend system (B=−7.72 cal cm⁻³). Miscibility, specific interactions, and peculiar T_g-composition relationships in the blends of PVPh with selected homologous polyesters are discussed.