Polyether-segmented nylon hemodialysis membranes. I. Preparation and permeability characteristics of polyether-segmented nylon 610 hemodialysis membrane

The effect of the coagulation condition in the phase inversion method on the permeability characteristics of poly(propylene oxide) or poly(tetramethylene oxide)-segmented nylon 610 (PPO-Ny610 or PTMO-Ny610) hemodialysis membranes, the stability of the membrane performance, and the mechanical strength were investigated. The polymers were dissolved in a solvent such as formic acid and methanol saturated with calcium chloride, and thus PPO-Ny610 and PTMO-Ny610 membranes were prepared using formic acid and a calcium chloride/methanol/water mixture as a polymer solvent and a coagulant, respectively. It is concluded that PPO-Ny610 membrane has better permeability characteristics than PTMO-Ny610 membrane, and possesses additional properties for hemodialysis membranes such as mechanical properties and permeability stability in the drying and sterilizing processes. Furthermore, the blood compatibilities of PPO-Ny610 and PTMO-Ny610 membranes were superior to regenerated cellulose membranes on the basis of the result of platelet adhesion test. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65:1703–1711, 1997     

Polyether-segmented nylon hemodialysis membranes. III. Preparation and properties of new polyether-segmented nylon

In order to apply a blood-compatible polymer to hemodialysis membrane, a new polyether-segmented nylon which dissolved in common organic solvents was designed. The basic polyether-segmented nylon was synthesized by melt polycondensation from sebacic acid, m-xylenediamine, and α,ω-bisaminopropyl-poly(ethylene oxide). To improve the solubility, azelaic acid and hexamethylenediamine were copolycondensed with the basic copolymer. The solubility was correlated with the heat of fusion (ΔH_m) of the copolymer. When ΔH_m is < 30 mJ/mg, the polymer is soluble in dimethylsulfoxide and makes a stable solution. The nonthrombogenicity was investigated in the viewpoint of adhesion of platelet onto the copolymer surface. It is made clear that the surface of the block copolymer, having > 10 wt % of poly(ethylene oxide), suppresses the adhesion of platelet, and the composition of the nylon block has no effect on the adhesion of platelet. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65:1723–1729, 1997     

Polyether-segmented nylon hemodialysis membranes. II. Morphologies and permeability characteristics of polyether-segmented nylon 610 membrane prepared by the phase inversion method

The relationships between the morphologies and the permeability characteristics as dialysis membrane of polyether-segmented nylon 610 (PE-Ny610) have been investigated. PE-Ny610 used are poly(propylene oxide) (PPO)-segmented nylon 610 containing 25 wt % PPO (PPO-Ny610) and poly(ethylene oxide) (PEO)-segmented nylon 610 containing 15 wt % PEO (PEO-Ny610). The morphologies in the cross section of the membranes exhibit the cellular porous structures due to liquid-liquid phase separation. On the other hand, the structures of the surfaces are mainly composed of the crystalline spherulite due to liquid-solid phase separation. These morphologies are little affected by the composition ratio of the coagulant, calcium chloride/methanol/water mixture. PEO-Ny610 membranes have shown superior membrane performances to the PPO-Ny610 membrane. The effect of PEO content in PEO-Ny610 on the adhesion of platelet onto the PEO-Ny610 film surface was investigated and it is concluded that PEO-Ny610 having > 10 wt % PEO shows a good nonthrombogenicity equal to PPO-Ny610. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65:1713–1721, 1997     

Polyether-segmented nylon hemodialysis membrane. VI. Effect of polyether segment on morphology and surface structure of membrane

Amorphous nylon, poly(iminoisophthaloyliminomethylene-1,3-cyclohexylenemethylene) (NyBI) and poly(ethylene oxide) (PEO)-segmented NyBI (PEO–NyBI) membranes were prepared by a phase-inversion method using water/dimethyl sulfoxide (DMSO) mixtures as coagulants. The influence of the PEO segment and coagulant compositions on the morphology of the membranes was investigated. The cloud-point curves in the polymer/DMSO/water ternary system showed that PEO–NyBI and NyBI had the same coagulation processes, that is, instantaneous liquid–liquid phase separation occurred, resulting in a fingerlike structure in the cross section of the membranes. The membrane morphologies observed under a scanning electron microscope (SEM) agreed with the prediction. The PEO segment had little or no effect on the membrane morphologies which were prepared in the coagulants with a low DMSO concentration, and it promoted the change of the phase-separation style from the instantaneous to the delayed one in the case of the DMSO-rich coagulant. The PEO segment, however, significantly influenced the ultrafiltration rate. Additionally, the relationship between the surface composition of the PEO–NyBI membrane and the coagulation condition was also investigated by use of electron spectroscopy for chemical analysis (ESCA) and static secondary ion mass spectrometry (SSIMS). A small enrichment of the PEO segment at the top surface of the membranes was observed with the increase of the DMSO concentration in the coagulant. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 1645–1659, 1998     

Polyether-segmented nylon hemodialysis membranes. IV. Membrane morphologies and permeability characteristics of dialysis membrane composed of poly(ethylene oxide)-segmented Ny69/M10

Dialysis membrane was prepared by a phase inversion method using a new polyether-segmented nylon which dissolves in common organic solvents such as dimethylsulfoxide. The polyether-segmented nylon contained poly(ethylene oxide) block and nylon block (random copolyamide: Ny69/M10) prepared by sebacic acid, azelaic acid, m-xylenediamine, and hexamethylenediamine. The morphologies and permeability characteristics of the membranes were investigated. It was shown by scanning electron microscope observation that the membrane had a fingerlike structure when dimethylsulfoxide was used as a polymer solvent, and a spongelike structure when an additive such as calcium chloride was added to the polymer solution. The high permeability for the solutes such as urea and vitamin B₁₂ were observed in comparison with the polyether-segmented Ny610 membranes prepared by a phase inversion method. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65:1731–1737, 1997     

磺化聚醚砜提高聚醚砜膜亲水性和血液相容性研究

Polyethersulfone (PES) is widely used as biomaterials due to its thermal stability, mechanical strength, and chemical inertness. Nevertheless, their blood compatibility is still not adequate for hemodialysis and blood pu-rification. In this study, the sulfonated polyethersulfone (SPES) was synthesized through an electrophilic substitu-tion reaction, and PES/SPES blending membranes were prepared. The characterization of the SPES was studied by FTIR. The water adsorption and water contact angle experiments show that the hydrophilicity of PES/SPES blend membrane was improved as for the sulfonate group existing in the SPES. Moreover, PES/SPES blend membrane could effectively reduce bovine serum albumin adsorption and prolong the blood coagulation time compared with the PES membrane, thereby improving blood compatibility.     

Polyether‐segmented nylon hemodialysis membrane. VII. Studies on surface structures of various poly(ethylene oxide)‐segmented nylon membranes

The relationships of the surface morphologies to the surface chemical compositions in poly(ethylene oxide)‐segmented nylon (PEO–Ny) membranes prepared by the phase‐inversion method were studied using scanning electron microscopy (SEM), electron spectroscopy for chemical analysis (ESCA), and static secondary ion mass spectrometry (SSIMS). The PEO–Ny's used were high semicrystalline PEO‐segmented polyiminosebacoyliminohexamethylene (PEO–Ny610), low semicrystalline PEO‐segmented poly(iminosebacoylimino‐m‐xylylene) (PEO–NyM10), and amorphous PEO‐ segmented poly(iminoisophthaloyliminomethylene‐1,3‐cyclohexylenemethylene) (PEO–NyBI). SEM observation showed that the surfaces of the PEO–Ny610 and PEO–NyM10 membranes were composed of crystalline spherulite and that the PEO–NyBI membrane surface had a nodular structure. ESCA analysis exhibited the enrichment of the PEO segment at the surfaces of the PEO–Ny610 and PEO–NyM10 membranes. On the other hand, the enrichment of the Ny segment was observed in the case of the PEO–NyBI membrane. SSIMS analysis revealed that the outermost surfaces of the PEO–Ny membranes except the PEO–NyBI membrane were almost covered with the PEO segment. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 517–528, 2000