Magnetic Core–Shell Molecularly Imprinted Nano-Conjugates for Extraction of Antazoline and Hydroxyantazoline from Human Plasma—Material Characterization,Theoretical Analysis and Pharmacokinetics

The aim of this study was to develop magnetic molecularly imprinted nano-conjugate sorbent for effective dispersive solid phase extraction of antazoline (ANT) and its metabolite, hydroxyantazoline (ANT-OH) in analytical method employing liquid chromatography coupled with mass spectrometry method. The core–shell material was characterized in terms of adsorption properties, morphology and structure. The heterogeneous population of adsorption sites towards ANT-OH was characterized by two K_d and two B_max values: K_d (1) = 0.319 µg L⁻¹ and B_max (1) = 0.240 μg g⁻¹, and K_d (2) = 34.6 µg L⁻¹ and B_max (2) = 5.82 μg g⁻¹. The elemental composition of magnetic sorbent was as follows: 17.55, 37.33, 9.14, 34.94 wt% for Si, C, Fe and O, respectively. The extraction protocol was optimized, and the obtained results were explained using theoretical analysis. Finally, the analytical method was validated prior to application to pharmacokinetic study in which the ANT was administrated intravenously to three healthy volunteers. The results prove that the novel sorbent could be useful in extraction of ANT and ANT-OH from human plasma and that the analytical strategy could be a versatile tool to explain a potential and pharmacological activity of ANT and ANT-OH.     

Single-Walled Carbon Nanotubes Modify Leaf Micromorphology,Chloroplast Ultrastructure and Photosynthetic Activity of Pea Plants

Single-walled carbon nanotubes (SWCNTs) emerge as promising novel carbon-based nanoparticles for use in biomedicine, pharmacology and precision agriculture. They were shown to penetrate cell walls and membranes and to physically interact and exchange electrons with photosynthetic complexes in vitro. Here, for the first time, we studied the concentration-dependent effect of foliar application of copolymer-grafted SWCNTs on the structural and functional characteristics of intact pea plants. The lowest used concentration of 10 mg L⁻¹ did not cause any harmful effects on the studied leaf characteristics, while abundant epicuticular wax generation on both leaf surfaces was observed after 300 mg L⁻¹ treatment. Swelling of both the granal and the stromal regions of thylakoid membranes was detected after application of 100 mg L⁻¹ and was most pronounced after 300 mg L⁻¹. Higher SWCNT doses lead to impaired photosynthesis in terms of lower proton motive force generation, slower generation of non-photochemical quenching and reduced zeaxanthin content; however, the photosystem II function was largely preserved. Our results clearly indicate that SWCNTs affect the photosynthetic apparatus in a concentration-dependent manner. Low doses (10 mg L⁻¹) of SWCNTs appear to be a safe suitable object for future development of nanocarriers for substances that are beneficial for plant growth.     

Bisphenol A sensing based on surface molecularly imprinted, ordered mesoporous silica

Molecularly imprinted, ordered mesoporous silica was synthesized using bisphenol A (BPA) as the template and 3-aminopropyltriethoxysilane modified with hexagonally structured mesoporous silica (SBA-15) as the carrier. Carbon paste sensors were constructed by mixing the molecularly imprinted, ordered mesoporous silica with graphite powder and paraffin oil, and they were found to detect bisphenol A (BPA) with enhanced selectivity due to their ordered mesoporous structure and their successful molecular imprinting. The linear range for the proposed sensor was 1.000 × 10⁻⁷ mol L⁻¹ to 5.000 × 10⁻⁴ mol L⁻¹, and the detection limit was determined to be 3.222 × 10⁻⁸ mol L⁻¹. Overall, the sensor detected the water samples with satisfactory results.     

Biosorption of Zn(II) from Seawater Solution by the Microalgal Biomass of Tetraselmis marina AC16-MESO

Biosorption refers to a physicochemical process where substances are removed from the solution by a biological material (live or dead) via adsorption processes governed by mechanisms such as surface complexation, ion exchange, and precipitation. This study aimed to evaluate the adsorption of Zn²⁺ in seawater using the microalgal biomass of Tetraselmis marina AC16-MESO “in vivo” and “not alive” at different concentrations of Zn²⁺ (0, 5, 10, and 20 mg L⁻¹) at 72 h. Analysis was carried out by using the Langmuir isotherms and by evaluating the autofluorescence from microalgae. The maximum adsorption of Zn²⁺ by the Langmuir model using the Q_max parameter in the living microalgal biomass (Q_max = 0.03051 mg g⁻¹) was more significant than the non-living microalgal biomass of T. marine AC16-MESO (Q_max = 0.02297 mg g⁻¹). Furthermore, a decrease in fluorescence was detected in cells from T. marina AC16-MESO, in the following order: Zn²⁺ (0 < 20 < 5 < 10) mg L⁻¹. Zn²⁺ was adsorbed quickly by living cells from T. marine AC16-MESO compared to the non-living microalgal biomass, with a decrease in photosystem II activities from 0 to 20 mg L⁻¹ Zn²⁺ in living cells.     

An Improved Protocol for Agrobacterium-Mediated Transformation in Subterranean Clover (Trifolium subterraneum L.)

Subterranean clover (Trifolium subterraneum) is the most widely grown annual pasture legume in southern Australia. With the advent of advanced sequencing and genome editing technologies, a simple and efficient gene transfer protocol mediated by Agrobacterium tumefaciens was developed to overcome the hurdle of genetic manipulation in subterranean clover. In vitro tissue culture and Agrobacterium transformation play a central role in testing the link between specific genes and agronomic traits. In this paper, we investigate a variety of factors affecting the transformation in subterranean clover to increase the transformation efficiency. In vitro culture was optimised by including cefotaxime during seed sterilisation and testing the best antibiotic concentration to select recombinant explants. The concentrations for the combination of antibiotics obtained were as follows: 40 mg L⁻¹ hygromycin, 100 mg L⁻¹ kanamycin and 200 mg L⁻¹ cefotaxime. Additionally, 200 mg L⁻¹ cefotaxime increased shoot regeneration by two-fold. Different plant hormone combinations were tested to analyse the best rooting media. Roots were obtained in a medium supplemented with 1.2 µM IAA. Plasmid pH35 containing a hygromycin-resistant gene and GUS gene was inoculated into the explants with Agrobacterium tumefaciens strain AGL0 for transformation. Overall, the transformation efficiency was improved from the 1% previously reported to 5.2%, tested at explant level with Cefotaxime showing a positive effect on shooting regeneration. Other variables in addition to antibiotic and hormone combinations such as bacterial OD, time of infection and incubation temperature may be further tested to enhance the transformation even more. This improved transformation study presents an opportunity to increase the feeding value, persistence, and nutritive value of the key Australian pasture.     

Magnetic molecularly imprinted polymer nanoparticles coupled with high performance liquid chromatography for solid‐phase extraction of carvedilol in serum samples

Herein, we report a magnetic molecularly imprinted polymers (m‐MIPs) using Fe₃O₄ as a magnetic component, carvedilol as a template molecule for the solid‐phase extraction (MISPE) as the sample clean‐up technique combined with high‐performance liquid chromatography (HPLC) and for the controlled release of carvedilol at different pH values of 1.0 (simulated gastric fluid), 6.8 (simulated intestinal fluid), and 7.4 (simulated biological fluid). The adsorption kinetics was modeled with the pseudo‐first‐order and pseudo‐second‐order kinetics, and the adsorption isotherms were fitted with Langmuir and Freundlich models. The performance of the m‐MIPs for the controlled release of carvedilol was assessed and results indicated that the magnetic MIPs also have potential applications in controlled drug release. Furthermore, the m‐MIPs were applied to the extraction of carvedilol from human blood plasma samples. Carvedilol can be quantified by this method in the 2–350 μg L^?1 concentration range. The limit of detection and limit of quantification in plasma samples are 0.13 and 0.45 μg L^?1. The results from HPLC showed good precision (3.5% for 50.0 μg L^?1) and recoveries (between 85 and 93) using m‐MIP from human plasma samples. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41209.     

Molecularly imprinted nanoparticles prepared by core‐shell emulsion polymerization

Submicron core‐shell polymer particles, with molecularly imprinted shells, were prepared by a two‐stage polymerization process. Particles of this type, prepared with a cholesterol‐imprinted ethyleneglycol dimethacrylate shell and in the absence of porogen, were found to be 76 nm in diameter with a surface area of 82 m² g⁻¹. Cholesterol uptake from a 1 mM solution in isohexane was measured at both 10 and 30 mg mL⁻¹, with the imprinted polymer showing considerable binding (up to 57%). Imprinted but not hydrolyzed and hydrolyzed nonimprinted polymers showed very low uptakes (≤4.5%) and a phenol‐imprinted polymer showed reduced binding (36%) under the same conditions. Imprinted shells were also prepared over superparamagnetic polymer cores and over magnetite ferrocolloid alone. The cholesterol binding to magnetic particles was very similar to that of equivalent nonmagnetic materials. Magnetic particles could be sedimented in as little as 30 s in a magnetic field. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1851–1859, 2000     

Novel Electrochemical Sensor Based on Molecularly Imprinted Polymers with MWCNTs-SiO2 for Selective and Sensitive Detecting 2,4-D

In this study, we introduced molecular imprinting combined with electrochemical method to determine trace 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide in standard solution and actual samples. For this purpose, we synthesis of vinyl silica coated MWCNTs in alkaline environment with surfactant, molecularly imprinted polymers were prepared on the surface of MWCNTs by free radical polymerization, following the composite materials were dissolved in chitosan solution and dropped on the glassy carbon electrode. The functionalized materials were characterized by fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, thermogravimetry and nitrogen adsorption desorption. Electrochemical performance of molecularly imprinted membrane was characterized by cyclic voltammetry, electrochemical impedance spectroscopy and differential pulse voltammetry. Selectivity, stability and reproducibility of the sensors were also studied and discussed. A good linear relationship for supervising 2,4-D from 1.0?×?10^?4 to 1.0?×?10^?8 mol L^?1 with the correlation coefficient of 0.994 and a low LOD of 4.270?nmol?L^?1 (S/N?=?3). The electrochemical sensor has been successfully applied to detect 2,4-D with a recovery rate ranges from 96.2 to 102.4% and a relative standard deviation of less than 4.74%. This work provides potential ideas for detection of trace 2,4-D in real samples.

     

Surface molecularly imprinted polymers based ZnO quantum dots as fluorescence sensors for detection of diethylhexyl phthalate with high sensitivity and selectivity

This work describes the preparation of molecularly imprinted polymers using ZnO quantum dots, which were used for the selective detection of diethylhexyl phthalate (DEHP). Methacrylic acid, ethylene glycol dimethacrylate, 2,2′‐azobis(2‐methylpropionitrile) and ZnO were used as functional monomer, crosslinker, initiator and optical material, respectively. Molecularly imprinted polymers were successfully synthesized, and the linear relationship between fluorescence intensity and amount was from 0.5 to 40 µmol L^?1 for DEHP. The coefficient of correlation was 0.9923 and the imprinting factor was 11.16. The results were above 97.50% and relative standard deviation below 3.86% for the detection of DEPH in actual water samples. This study could provide a novel method using molecularly imprinted polymers for highly selective and sensitive detection of DEHP. © 2018 Society of Chemical Industry     

Entropy Perspectives of Molecular and Evolutionary Biology

Attempts to find and quantify the supposed low entropy of organisms and its preservation are revised. The absolute entropy of the mixed components of non-living biomass (approximately −1.6 × 10³ J K⁻¹ L⁻¹) is the reference to which other entropy decreases would be ascribed to life. The compartmentation of metabolites and the departure from the equilibrium of metabolic reactions account for reductions in entropy of 1 and 40–50 J K⁻¹ L⁻¹, respectively, and, though small, are distinctive features of living tissues. DNA and proteins do not supply significant decreases in thermodynamic entropy, but their low informational entropy is relevant for life and its evolution. No other living feature contributes significantly to the low entropy associated with life. The photosynthetic conversion of radiant energy to biomass energy accounts for most entropy (2.8 × 10⁵ J K⁻¹ carbon kg⁻¹) produced by living beings. The comparatively very low entropy produced in other processes (approximately 4.8 × 10² J K⁻¹ L⁻¹ day⁻¹ in the human body) must be rapidly exported outside as heat to preserve low entropy decreases due to compartmentation and non-equilibrium metabolism. Enzymes and genes are described, whose control minimizes the rate of production of entropy and could explain selective pressures in biological evolution and the rapid proliferation of cancer cells.     

Adsorption and Release of Sulfamethizole from Mesoporous Silica Nanoparticles Functionalised with Triethylenetetramine

Mesoporous silica nanoparticles (MSN) were synthesised and functionalised with triethylenetetramine (MSN-TETA). The samples were fully characterised (transmission electron microscopy, small angle X-ray scattering, Fourier transform infrared spectroscopy, thermogravimetric analysis, zeta potential and nitrogen adsorption/desorption isotherms) and used as carriers for the adsorption of the antimicrobial drug sulphamethizole (SMZ). SMZ loading, quantified by UV–Vis spectroscopy, was higher on MSN-TETA (345.8 mg g⁻¹) compared with bare MSN (215.4 mg g⁻¹) even in the presence of a lower surface area (671 vs. 942 m² g⁻¹). The kinetics of SMZ adsorption on MSN and MSN-TETA followed a pseudo-second-order model. The adsorption isotherm is described better by a Langmuir model rather than a Temkin or Freundlich model. Release kinetics showed a burst release of SMZ from bare MSN samples (k₁ = 136 h⁻¹) in contrast to a slower release found with MSN-TETA (k₁ = 3.04 h⁻¹), suggesting attractive intermolecular interactions slow down SMZ release from MSN-TETA. In summary, the MSN surface area did not influence SMZ adsorption and release. On the contrary, the design of an effective drug delivery system must consider the intermolecular interactions between the adsorbent and the adsorbate.     

Gas Chromatography–Mass Spectrometry Based Approach for the Determination of Methionine-Related Sulfur-Containing Compounds in Human Saliva

Gas chromatography–mass spectrometry technique (GC-MS) is mainly recognized as a tool of first choice when volatile compounds are determined. Here, we provide the credible evidence that its application in analysis can be extended to non-volatile sulfur-containing compounds, to which methionine (Met), homocysteine (Hcy), homocysteine thiolactone (HTL), and cysteine (Cys) belong. To prove this point, the first method, based on GC-MS, for the identification and quantification of Met-related compounds in human saliva, has been elaborated. The assay involves simultaneous disulfides reduction with tris(2-carboxyethyl)phosphine (TCEP) and acetonitrile (MeCN) deproteinization, followed by preconcentration by drying under vacuum and treatment of the residue with a derivatizing mixture containing anhydrous pyridine, N-trimethylsilyl-N-methyl trifluoroacetamide (MSTFA), and trimethylchlorosilane (TMCS). The validity of the method was demonstrated based upon US FDA recommendations. The assay linearity was observed over the range of 0.5–20 µmol L⁻¹ for Met, Hcy, Cys, and 1–20 µmol L⁻¹ for HTL in saliva. The limit of quantification (LOQ) equals 0.1 µmol L⁻¹ for Met, Hcy, Cys, while its value for HTL was 0.05 µmol L⁻¹. The method was successfully applied to saliva samples donated by apparently healthy volunteers (n = 10).     

Development of Molecularly Imprinted Polymer in Porous Film Format for Binding of Phenol and Alkylphenols from Water

Molecularly imprinted polymers (MIPs) were fabricated on glass slides with a “sandwich” technique giving ~20 μm thick films. Methanol/water as a solvent, and polyethyleneglycol and polyvinylacetate as solvent modifiers, were used to give a porous morphology, which was studied with scanning electron microscopy and gravimetric analysis. Various MIPs were synthesized through non-covalent imprinting with phenol as the template; itaconic acid, 4-vinylpyridine, and styrene as monomers; ethylene glycol dimethacrylate, triethylene glycol dimethacrylate, and pentaerythritol triacrylate (PETA) as cross-linkers. Binding and imprinting properties of the MIPs were evaluated based on phenol adsorption isotherms. Since phenol has only one weakly acidic hydroxyl group and lacks unique structural characteristics necessary for binding specificity, the preparation of selective MIPs was challenging. The recognition of phenol via hydrogen bonding is suppressed in water, while hydrophobic interactions, though promoted, are not specific enough for highly-selective phenol recognition. Nevertheless, the styrene-PETA MIP gave modest imprinting effects, which were higher at lower concentrations (Imprinting Factor (IF) = 1.16 at 0.5 mg·L⁻¹). The isotherm was of a Freundlich type over 0.1–40 mg·L⁻¹ and there was broad cross-reactivity towards other structurally similar phenols. This shows that phenol MIPs or simple adsorbents can be developed based on styrene for hydrophobic binding, and PETA to form a tighter, hydrophilic network.     

Preparation of molecularly imprinted fluorescence sensor based on carbon quantum dots via precipitation polymerization for fluorescence detection of tetracycline

A facile and effective method was proposed to prepare the molecularly imprinted fluorescence sensor with carbon quantum dots, which were modified vinyl groups by acrylic acid on the surface. The obtained fluorescence composite material was investigated by transmission electron microscope and Fourier transform infrared spectra. After the experimental conditions were optimized, a linear range of 1.0–60 μmol L⁻¹ was obtained and the detection limit was 0.17 μmol L⁻¹. The novel fluorescence sensor can be successfully used to detect tetracycline in real samples. This study provides a convenient strategy for selective recognition and rapid detection of tetracycline in the complex environment.     

The TRPA1 Agonist Cinnamaldehyde Induces the Secretion of HCO3− by the Porcine Colon

A therapeutic potential of the TRPA1 channel agonist cinnamaldehyde for use in inflammatory bowel disease is emerging, but the mechanisms are unclear. Semi-quantitative qPCR of various parts of the porcine gastrointestinal tract showed that mRNA for TRPA1 was highest in the colonic mucosa. In Ussing chambers, 1 mmol·L⁻¹ cinnamaldehyde induced increases in short circuit current (ΔI_sc) and conductance (ΔG_t) across the colon that were higher than those across the jejunum or after 1 mmol·L⁻¹ thymol. Lidocaine, amiloride or bumetanide did not change the response. The application of 1 mmol·L⁻¹ quinidine or the bilateral replacement of 120 Na⁺, 120 Cl⁻ or 25 HCO₃⁻ reduced ΔG_t, while the removal of Ca²⁺ enhanced ΔG_t with ΔI_sc numerically higher. ΔI_sc decreased after 0.5 NPPB, 0.01 indometacin and the bilateral replacement of 120 Na⁺ or 25 HCO₃⁻. The removal of 120 Cl⁻ had no effect. Cinnamaldehyde also activates TRPV3, but comparative measurements involving patch clamp experiments on overexpressing cells demonstrated that much higher concentrations are required. We suggest that cinnamaldehyde stimulates the secretion of HCO₃⁻ via apical CFTR and basolateral Na⁺-HCO₃⁻ cotransport, preventing acidosis and damage to the epithelium and the colonic microbiome. Signaling may involve the opening of TRPA1, depolarization of the epithelium and a rise in PGE2 following a lower uptake of prostaglandins via OATP2A1.     

Melatonin as a Signaling Molecule for Metabolism Regulation in Response to Hypoxia in the Crab Neohelice granulata

Melatonin has been identified in a variety of crustacean species, but its function is not as well understood as in vertebrates. The present study investigates whether melatonin has an effect on crustacean hyperglycemic hormone (CHH) gene expression, oxygen consumption (VO₂) and circulating glucose and lactate levels, in response to different dissolved-oxygen concentrations, in the crab Neohelice granulata, as well as whether these possible effects are eyestalk- or receptor-dependent. Melatonin decreased CHH expression in crabs exposed for 45 min to 6 (2, 200 or 20,000 pmol·crab⁻¹) or 2 mgO₂·L⁻¹ (200 pmol·crab⁻¹). Since luzindole (200 nmol·crab⁻¹) did not significantly (p > 0.05) alter the melatonin effect, its action does not seem to be mediated by vertebrate-typical MT1 and MT2 receptors. Melatonin (200 pmol·crab⁻¹) increased the levels of glucose and lactate in crabs exposed to 6 mgO₂·L⁻¹, and luzindole (200 nmol·crab⁻¹) decreased this effect, indicating that melatonin receptors are involved in hyperglycemia and lactemia. Melatonin showed no effect on VO₂. Interestingly, in vitro incubation of eyestalk ganglia for 45 min at 0.7 mgO₂·L⁻¹ significantly (p < 0.05) increased melatonin production in this organ. In addition, injections of melatonin significantly increased the levels of circulating melatonin in crabs exposed for 45 min to 6 (200 or 20,000 pmol·crab⁻¹), 2 (200 and 20,000 pmol·crab⁻¹) and 0.7 (200 or 20,000 pmol·crab⁻¹) mgO₂·L⁻¹. Therefore, melatonin seems to have an effect on the metabolism of N. granulata. This molecule inhibited the gene expression of CHH and caused an eyestalk- and receptor-dependent hyperglycemia, which suggests that melatonin may have a signaling role in metabolic regulation in this crab.     

Molecular Characterization of α- and β-Thalassaemia among Malay Patients

Both α- and β-thalassaemia syndromes are public health problems in the multi-ethnic population of Malaysia. To molecularly characterise the α- and β-thalassaemia deletions and mutations among Malays from Penang, Gap-PCR and multiplexed amplification refractory mutation systems were used to study 13 α-thalassaemia determinants and 20 β-thalassaemia mutations in 28 and 40 unrelated Malays, respectively. Four α-thalassaemia deletions and mutations were demonstrated. −−^SEA deletion and α^CSα accounted for more than 70% of the α-thalassaemia alleles. Out of the 20 β-thalassaemia alleles studied, nine different β-thalassaemia mutations were identified of which β^E accounted for more than 40%. We concluded that the highest prevalence of (α- and β-thalassaemia alleles in the Malays from Penang are −−^SEA deletion and β^E mutation, respectively.     

Preparation and evaluation of aconitine imprinted microspheres and its application to body fluid samples

To extract aconitine from body fluid samples, aconitine‐molecularly imprinted polymer microspheres with the optimum molar ratios of template/monomer/cross‐linker (1:8:40) as selective sorbents were synthesized by precipitation polymerization. Excellent retention of aconitine on the molecularly imprinted microspheres (MIMs) cartridge was achieved by optimizing the MISPE process, and the binding capacity reached 0.802mg/g, yielding an imprinting factor of 4.76. The MIMs also showed high selectivity for aconitum alkaloids, but not for other kinds of poisonous alkaloids. High recoveries (>89%) for aconitine, hypaconitine, and mesaconitine were got in spiked serum samples. The working curves show linear dependence on aconitine concentration in the range of 2.0–0.1 µg/mL, and the detection limits of aconitine, hypaconitine, and mesaconitine were 16.7, 18.3, 10.2 ng mL^–1, respectively. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Novel Mechanism and Kinetics of Tetramethrin Degradation Using an Indigenous Gordonia cholesterolivorans A16

Tetramethrin is a pyrethroid insecticide that is commonly used worldwide. The toxicity of this insecticide into the living system is an important concern. In this study, a novel tetramethrin-degrading bacterial strain named A16 was isolated from the activated sludge and identified as Gordonia cholesterolivorans. Strain A16 exhibited superior tetramethrin degradation activity, and utilized tetramethrin as the sole carbon source for growth in a mineral salt medium (MSM). High-performance liquid chromatography (HPLC) analysis revealed that the A16 strain was able to completely degrade 25 mg·L⁻¹ of tetramethrin after 9 days of incubation. Strain A16 effectively degraded tetramethrin at temperature 20–40 °C, pH 5–9, and initial tetramethrin 25–800 mg·L⁻¹. The maximum specific degradation rate (q_max), half-saturation constant (K_s), and inhibition constant (K_i) were determined to be 0.4561 day⁻¹, 7.3 mg·L⁻¹, and 75.2 mg·L⁻¹, respectively. The Box–Behnken design was used to optimize degradation conditions, and maximum degradation was observed at pH 8.5 and a temperature of 38 °C. Five intermediate metabolites were identified after analyzing the degradation products through gas chromatography–mass spectrometry (GC-MS), which suggested that tetramethrin could be degraded first by cleavage of its carboxylester bond, followed by degradation of the five-carbon ring and its subsequent metabolism. This is the first report of a metabolic pathway of tetramethrin in a microorganism. Furthermore, bioaugmentation of tetramethrin-contaminated soils (50 mg·kg⁻¹) with strain A16 (1.0 × 10⁷ cells g⁻¹ of soil) significantly accelerated the degradation rate of tetramethrin, and 74.1% and 82.9% of tetramethrin was removed from sterile and non-sterile soils within 11 days, respectively. The strain A16 was also capable of efficiently degrading a broad spectrum of synthetic pyrethroids including D-cyphenothrin, chlorempenthrin, prallethrin, and allethrin, with a degradation efficiency of 68.3%, 60.7%, 91.6%, and 94.7%, respectively, after being cultured under the same conditions for 11 days. The results of the present study confirmed the bioremediation potential of strain A16 from a contaminated environment.     

Electrochemical Determination of Food Preservative Nitrite with Gold Nanoparticles/p-Aminothiophenol-Modified Gold Electrode

Due to the negative impact of nitrate and nitrite on human health, their presence exceeding acceptable levels is not desired in foodstuffs. Thus, nitrite determination at low concentrations is a major challenge in electroanalytical chemistry, which can be achieved by fast, cheap, and safe electrochemical sensors. In this work, the working electrode (Au) was functionalized with p-aminothiophenol (p-ATP) and modified with gold nanoparticles (Au-NPs) to manufacture the final (Au/p-ATP-Au_nano) electrode in a two-step procedure. In the first step, p-ATP was electropolymerized on the electrode surface to obtain a polyaminothiophenol (PATP) coating. In the second step, Au/p-ATP-Au_nano working electrode was prepared by coating the surface with the use of HAuCl₄ solution and cyclic voltammetry. Determination of aqueous nitrite samples was performed with the proposed electrode (Au/p-ATP-Au_nano) using square wave voltammetry (SWV) in pH 4 buffer medium. Characteristic peak potential of nitrite samples was 0.76 V, and linear calibration curves of current intensity versus concentration was linear in the range of 0.5–50 mg·L⁻¹ nitrite with a limit of detection (LOD) of 0.12 mg·L⁻¹. Alternatively, nitrite in sausage samples could be colorimetrically determined with high sensitivity by means of p-ATP‒modified gold nanoparticles (AuNPs) and naphthylethylene diamine as coupling agents for azo-dye formation due to enhanced charge-transfer interactions with the AuNPs surface. The slopes of the calibration lines in pure NO₂⁻ solution and in sausage sample solution, to which different concentrations of NO₂⁻ standards were added, were not significantly different from each other, confirming the robustness and interference tolerance of the method. The proposed voltammetric sensing method was validated against the colorimetric nanosensing method in sausage samples.