Stiffness and strength of oil palm wood core sandwich panel under center point bending

This paper presents a study of the bending's stiffness and strength of oil palm wood (OPW) core sandwich panel overlaid with rubberwood veneer under center point bending. Parameters including density and grain orientation of OPW core, rubberwood veneer thickness and span length were investigated. An experimental evaluation of some mechanical properties of OPW and the bending stiffness and strength of the sandwich beams was performed. Linear elastic beam theory was used to predict the bending performance of the panels. Results show that the linear elastic beam theory with the uses of the power law expressions of Young's moduli and shear strength of the OPW as a function of density derived within this study, adequately predicted the stiffness and bending strength of the sandwich beams. Higher OPW core density increased stiffness and strength of the beam. Failures by face fracture and core shear were observed which the latter tended to occur at low OPW core density, relatively thick veneer face and short span length. Grain orientation of OPW core little influenced stiffness and strength of the sandwich board. Finally, the stiffness and failure load equations of the OPW sandwich board were proposed for practical uses of this product.     

Flexural behaviour of glue-laminated fibre composite sandwich beams

This study involved experimental investigation onto the flexural behaviour of glue-laminated fibre composite sandwich beams with a view of using this material for structural beams. Composite sandwich beams with 1, 2, 3, and 4 composite sandwich panels glued together were subjected to 4-point static bending test in the flatwise and edgewise positions to evaluate their stiffness and strength properties. The results showed that the composite sandwich beams in the edgewise position failed with 25% higher bending strength but have 7% lower bending stiffness than beams in the flatwise position. The results however indicated that the bending stiffness of flatwise specimens converges to that of the edgewise specimens with increasing laminations. More importantly, the specimens in the edgewise position failed with greater ductility due to progressive failure of the fibre composite skins while the specimens in the flatwise position failed in a brittle manner due to debonding between the skin and core. Wrapping the glue-laminated sandwich beams with one layer of tri-axial glass fibres did not prove to be effective. Overall, it has been demonstrated that the glue-laminated sandwich beams exhibited better performance than the individual composite sandwich beams.     

Effect of core thickness on wave number and damping properties in sandwich composites

Due to their higher strength-to-weight and stiffness-to-weight ratios compared to metals, fiber reinforced composite materials are a great alternative for use in many structural applications. However these properties lead to poor acoustic performance as composite materials are excellent noise radiators. This is particularly true for sandwich composite structures. Therefore the focus of this study is to investigate the effect of a core thickness change on the vibrational properties of Rohacell foam/carbon-fiber face sheet sandwich composite beams. Four different foam core thicknesses were explored, using a combination of experimental and analytical methods to characterize sound and vibrational properties of the sandwich beams. First, the wave number responses of the beams were obtained, from which coincidence frequencies were identified. Second, from the frequency response functions the structural damping loss factor, η, was determined using the half-power bandwidth method. Experimental and analytical results show that the relationship between core thickness and coincidence frequency is non-linear. A drastic increase in coincidence frequency was observed for the sandwich beam with the thinnest core thickness due to the low bending stiffness. Moreover this low bending stiffness results in low damping values, and consequently high wave number amplitude responses at low frequency ranges (<1000 Hz).     

Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions

The flexural behaviour of a new generation composite sandwich beams made up of glass fibre-reinforced polymer skins and modified phenolic core material was investigated. The composite sandwich beams were subjected to 4-point static bending test to determine their strength and failure mechanisms in the flatwise and the edgewise positions. The results of the experimental investigation showed that the composite sandwich beams tested in the edgewise position failed at a higher load with less deflection compared to specimens tested in the flatwise position. Under flexural loading, the composite sandwich beams in the edgewise position failed due to progressive failure of the skin while failure in the flatwise position is in a brittle manner due to either shear failure of the core or compressive failure of the skin followed by debonding between the skin and the core. The results of the analytical predictions and numerical simulations are in good agreement with the experimental results.     

玻璃纤维立体织物增强环氧树脂泡沫夹层复合材料的制备及力学性能

为了进一步提高泡沫夹层复合材料的承载能力和综合性能,实现其在轨道交通及汽车等工业领域的应用,开展了玻璃纤维立体织物增强环氧树脂泡沫(GF-Fabric/EP)复合材料的制备及其力学性能的研究。制备GF-Fabric/EP复合材料及其夹层结构,探索了GF-Fabric/EP复合材料及其夹层结构的失效行为,以揭示立体织物的增强机制。结果表明：立体织物的引入可显著改善GF-Fabric/EP复合材料的强度、刚度及破坏应变;但在不同承载条件下,各纱线发挥承载作用和效果不同。面板、芯材各自的性能、尺寸及面/芯界面性能均是影响GF-Fabric/EP夹层复合材料力学性能及失效特征的重要因素。以三点加载下的弯曲性能为例,针对不同的GF-Fabric/EP夹层复合材料,需调整跨厚比和试样尺寸并获得理想的失效特征,方可对其弯曲性能或层间剪切性能进行有效、合理的评价。     

复合材料褶皱夹芯结构研究进展

复合材料褶皱夹芯结构是通过二维材料折叠而成的三维周期性空间结构,作为一种新型的夹芯结构,具有轻质、高比强度、高比刚度、芯子空间贯通及多功能潜力等优势。本文结合飞行器结构轻量化和多功能化要求,对近年来复合材料褶皱夹芯结构的主要研究成果与特点进行了总结和分析。阐述了复合材料褶皱夹芯结构的构型优化方案及制备工艺,重点归纳了复合材料褶皱夹芯结构的力学性能及多功能的研究现状,包括结构的准静态力学性能、抗冲击性能及隔声、热防护、隐身性能等。基于国内外研究现状,对未来复合材料褶皱夹芯结构的重点研究方向进行了展望。      

含泡沫铝芯的复合板弯曲疲劳行为的研究

应用表面位移原位分析技术对由泡沫金属铝芯和金属面板组成的三层复合板在循环弯曲载荷条件下的损伤行为进行了观察和研究。循环弯曲载荷条件下复合板失效的基本方式是表面凹陷（Indentation，ID）和泡沫铝内芯切断（Coreshear，CS）。凹陷型失效是与加载压头接触的复合板表面局部压缩密切相关，该处沿垂直方向的压缩应变最大。内芯切断型失效是泡沫铝内芯中切应变最大的区域发生的剪切破坏。在疲劳应力比R=0时，复合板凹陷型失效的疲劳极限高于内芯切断型失效的疲劳极限。     

Bending response of sandwich panels with discontinuous wire-woven metal cores

The effects of a gap between discontinuous WBK (Wire-woven Bulk Kagome) cores on the bending properties of mild steel sandwich panels were elaborated. Analytic solutions were derived, and the experimental and numerical results of the bending response of sandwich panels with continuous and discontinuous WBK cores were presented. The analytic solutions of sandwich panels with continuous or discontinuous WBK cores under bending load provided good estimations of the failure mode, peak load, and bending stiffness in comparison with the experimental results. The strength and stiffness of sandwich panels with discontinuous WBK cores under bending load often substantially deteriorated depending on the gap width between the cores and on the detailed geometry near the gap. The analytic solutions successfully explained how the deterioration of the bending strength or stiffness could be minimized, when two separate sandwich panels or cores are to be joined.     

Improving the bending strength and energy absorption of corrugated sandwich composite structure

The bending strength, stiffness and energy absorption of corrugated sandwich composite structure were investigated to explore novel designs of lightweight load-bearing structures that are capable of energy absorption in transportation vehicles. Key design parameters that were considered include fibre type, corrugation angle, core-sheet thickness, bond length between core and face-sheets, and foam inserts. The results revealed that the hybridization of glass fibres and carbon fibres (50:50) in face-sheets was able to achieve the equivalent specific bending strength as the facet-sheets made entirely of carbon fibre composites. Increasing the corrugation angle and the core sheet thickness improved the specific bending strength of the sandwich structure, while increasing the bond length led to a reduction in the specific bending strength. The hybrid composite coupons with foam insertion showed medium energy absorption, ranging between the glass fibre and the carbon fibre composite coupons, but the highest crush force efficiency among all designs.     

Dynamic response of clamped sandwich beam with aluminium alloy foam core subjected to impact loading

The dynamic response of clamped sandwich beam with aluminium alloy open-cell foam core subjected to impact loading is investigated in the paper. The face sheet and the core of the sandwich beam have the different thickness. And the sandwich beam is impacted by a steel projectile in the mid-span. The impact force is recorded by using accelerometer. The results show that tensile crack and core shear are the dominant failure modes. And the impact velocity and the thickness of the face sheet and the foam core have a significant influence on the failure modes and the impact forces. Combining with the inertia effect and experimental results, the failure mechanisms of the sandwich beams are discussed. The thickness of the foam core plays an important role in the failure mechanism of the sandwich beam. In present paper, the failure of the sandwich beam with a thin core is dominated by the bending moment, while the sandwich beam with a thick core fails by bending deformation in the front face sheet and the bottom face sheet in opposite direction due to the plastic hinges in the front face sheet.     

In-plane compression of sandwich panels with debonds

The post failure behaviour of sandwich panels loaded in in-plane compression is studied by considering the structural response of such panels with symmetrically located edge debonds. A parametric finite element model is used to determine the influence of different material and geometrical properties on the failure progression, i.e. after initiation of damage. The investigated failure modes are buckling of the debonded face sheets, debond propagation and face sheet failure. The postbuckling failure mode is mainly determined by the fracture toughness of the core and the bending stiffness and strength of the face sheets. The presented approach and results can be used to determine how sandwich panels should be constituted, or not, to promote damage progression favourable for efficient energy absorption during in-plane crushing. The prolonged damage propagation is very complex as it is strongly non-linear and depends on a combination of stiffness, strength and geometry of the constituent materials.     

Shear coupling effects of the core in curved sandwich beams

We consider a composite package formed by two curved external Euler-Bernoulli beams, which sandwich an elastic core with negligible bending strength but providing the shear coupling of the external layers. This coupling considerably affects the gross response of the composite structure. There is an extensive literature on straight sandwich beams of this type, but very little attention has been paid to the effects of curvature. Here, an analytical linear elastic model is proposed for beams with arbitrary variable curvature. Equilibrium equations and boundary conditions are obtained through a variational approach. Useful simplifications are possible for the case of moderately curved beams and beams with constant curvature.     

Static and low-velocity impact behavior of sandwich beams with closed-cell aluminum-foam core in three-point bending

In this paper, the response and failure of sandwich beams with aluminum-foam core are investigated. Quasi-static and low-velocity impact bending tests are carried out for sandwich beams with aluminum-foam core. The deformation and failure behavior is explored. It is found that the failure mode and the load history predicted by a modified Gibson's model agree well with the quasi-static experimental data. The failure modes and crash processes of beams under impact loading are similar to those under quasi-static loading, but the force-displacement history is very different. Hence the quasi-static model can also predict the initial dynamic failure modes of sandwich beams when the impact velocity is lower than 5 m/s.     

蜂窝夹层修理结构的弯曲性能试验分析

采用四点弯加载方式研究分析了含损伤蜂窝夹层修理结构的弯曲性能,该夹层结构由碳纤维增强的聚合物面板和蜂窝芯子组成。进一步分析了挖补斜度、挖补方式、损伤程度、修理设备和修理材料对修理板弯曲性能的影响。研究表明,修理板的破坏模式可分为补片边缘折断、补片中面折断和胶层破坏三种,相同破坏模式修理板的名义弯曲强度相近,其中前两种破坏模式修理板的名义弯曲强度与完好板相近,而第三种破坏模式修理板的名义弯曲强度相对较低。所有修理板的名义弯曲强度恢复率基本处于95%以上,同时修理后抗弯刚度也满足修理准则。     

Free vibration analysis of simply supported sandwich beams with lattice truss core

Free vibration of AISI 304 stainless steel sandwich beams with pyramidal truss core is investigated in the present paper. The lattice truss core is transformed to a continuous homogeneous material. Considering the deformation characteristics of the sandwich beam, the following assumptions are made: (1) the thickness of the sandwich beam remains constant during deformation; (2) for the thin face sheets, only bending deformation is considered, neglecting the effect of transverse shear deformation; (3) for the core, only shear deformation is considered as the core is too weak to provide a significant contribution to the bending stiffness of the sandwich beam. The shear stress is assumed to be constant along the thickness of the core. The governing equation of free vibration is derived from Hamilton's principle, and the natural frequencies are calculated under simply supported boundary conditions. Finally, numerical simulation is carried out to get the mode shapes and natural frequencies. Our results show that the theoretical solutions agree well with the numerical results. It indicates the present method would be useful for free vibration analysis of sandwich beams with lattice truss core.     

Parametric study on design of composite–foam–resin concrete sandwich structures for precision machine tool structures

In this paper, sandwich structures for micro-EDM machines are optimized by using parametric study varying composite geometries and parameters like stacking sequence, thickness and rib geometry. The structures are composed of fibre reinforced composites for skin material and resin concrete and PVC foam (Closed cell, Divinycell) for core materials. Column structure was designed by a beam with cruciform rib and performance indices such as static bending stiffness (EI) and specific bending stiffness (EI/ρ) for dynamic stability are examined by controlling the thickness and stacking sequence of composites. For the machine tool bed, which usually has a plate shape, was designed to have high stiffness in two directions at the same time controlling stacking sequence and rib geometry; that is, rib thickness and number of ribs. The sensitivity of design parameters like rib thickness and composite skin thickness was examined and the optimal condition for high stiffness structure was suggested. Finite element analysis was also performed to verify the static and dynamic robustness of the machine structure. L-shaped joint for combining bed and column of the micro-EDM machine was proposed and fabricated using adhesive bonding. The dynamic performance such as damping characteristics was investigated by vibration tests. From the results optimal configuration and materials for high precision micro-EDM machines are proposed.     

Glulam beams reinforced with FRP externally-bonded: theoretical and experimental evaluation

The glued- laminated lumber (glulam) technique is an efficient process for the rational use of wood. Fiber-reinforced polymer (FRPs) associated with glulam beams provide significant improvements in strength and stiffness and alter the failure mode of these structural elements. In this context, this paper presents guidance for glulam beam production, an experimental analysis of glulam beams made of Pinus caribea var. hondurensis species without and with externally-bonded FRP and theoretical models to evaluate reinforced glulam beams (bending strength and stiffness). Concerning the bending strength of the beams, this paper aims only to analyze the limit state of ultimate strength in compression and tension. A specific disposal was used in order to avoid lateral buckling, once the tested beams have a higher ratio height-to-width. The results indicate the need of production control so as to guarantee a higher efficiency of the glulam beams. The FRP introduced in the tensile section of glulam beams resulted in improvements on their bending strength and stiffness due to the reinforcement thickness increase. During the beams testing, two failure stages were observed. The first was a tensile failure on the sheet positioned under the reinforcement layer, while the second occurred as a result of a preliminary compression yielding on the upper side of the lumber, followed by both a shear failure on the fiber-lumber interface and a tensile failure in wood. The model shows a good correlation between the experimental and estimated results.     

Mechanical behavior of carbon fiber reinforced polymer composite sandwich panels with 2-D lattice truss cores

Composite sandwich structures with lattice truss cores are attracting more and more attention due to their superior specific strength/stiffness and multi-functional applications. In the present study, the carbon fiber reinforced polymer (CFRP) composite sandwich panels with 2-D lattice truss core are manufactured based on the hot-pressing method using unidirectional carbon/epoxy prepregs. The facesheets are interconnected with lattice truss members by means of that both ends of the lattice truss members are embedded into the facesheets, without the bonding procedure commonly adopted by sandwich panels. The mechanical properties of the 2-D lattice truss sandwich panels are investigated under out-of-plane compression, shear and three-point bending tests. Delamination of the facesheets is observed in shear and bending tests while node failure mode does not occur. The tests demonstrate that delamination of the facesheet is the primary failure mode of this sandwich structure other than the debonding between the facesheets and core for conventional sandwiches.     

The Effect of Load and Geometry on the Failure Modes of Sandwich Beams

Facing compressive failure, facing wrinkling and core shear failure are the most commonly encountered failure modes in sandwich beams with facings made of composite materials. The occurrence and sequence of these failure modes depends on the geometrical dimensions, the form of loading and type of support of the beam. In this paper the above three failure modes in sandwich beams with facings made of carbon/epoxy composites and cores made of aluminum honeycomb and two types of foam have been investigated. Two types of beams, the simply supported and the cantilever have been considered. Loading included concentrated, uniform and triangular. It was found that in beams with foam core facing wrinkling and core shear failure occur, whereas in beams with honeycomb core facing compressive failure and core shear crimping take place. Results were obtained for the dependence of failure mode on the geometry of the beam and the type of loading. The critical beam spans for failure mode transition from core shear to wrinkling failure were established. It was found that initiation of a particular failure mode depends on the properties of the facing and core materials, the geometrical configuration, the type of support and loading of sandwich beams.     

Failure initiation and propagation characteristics of honeycomb sandwich composites

The energy absorbed during the failure of a variety of structural shapes is influenced by material, geometry and the failure mode. Failure initiation and propagation of the honeycomb sandwich under loading involves not only non-linear behavior of the constituent materials, but also complex interactions between various failure mechanisms. Therefore, there is a need for an improved understanding of the material characteristics and energy absorption modes to facilitate the design of sandwich performance. In the present study, failure initiation and propagation characteristics of sandwich beams and panels subjected to quasi-static and impact loadings were investigated. Experimental studies involved a series of penetration and perforation tests on 2D beam and 3D panel configurations using a truncated cone impactor with impact velocities up to 10 m/s. Preliminary tests were also performed on the sandwich beams subjected to the three-point bending. Load-carrying, energy-absorbing characteristics and failure mechanisms under quasi-static and impact loading were determined. Dominant deformation modes involved upper skin compression failure in the vicinity of the indenter, core crushing and lower skin tensile failure.