水-丁酸-壬醇三相系统的液液平衡

Liquid-liquid equilibrium (LLE) data for the water butyric acid nonanol system have been determined experimentally at the temperatures of 298.15 K, 308.15 K and 318.15 K. Tie-line compositions were correlated by Othmer-Tobias method. The universal quasichemical functional group activity coefficient (UNIFAC) and modified UNIFAC methods were used to predict the phase equilibrium in the system using the interaction parameters between CH3, CH2, COOH, OH and H2O functional groups. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

Salt effect on the liquid–liquid equilibrium of the ternary (water + phenol + methyl isobutyl ketone) system: Experimental data and correlation

The effects of NaCl, KCl and Na_2SO_4 on the liquid–liquid equilibrium(LLE) data for the ternary system, water+ phenol + methyl isobutyl ketone, were determined at 0.101 MPa and 333.15 K and 343.15 K.The nonrandom two-liquid(NRTL) model was used to correlate the experimental data and to yield corresponding binary interaction parameters for these salt containing systems.The Hand and Othmer–Tobias equations were used to confirm the dependability of the determined LLE data in this work.Distribution coefficient and selectivity were used to evaluate the extraction performance of methyl isobutyl ketone with the existence of salt.The magnitude of salt effect on the water + phenol + methyl isobutyl ketone(MIBK) system is in the following order: Na_2SO_4NaClKCl.     

硫酸铁改性颗粒活性氧化铝除氟的等温线研究

The adsorption equilibrium of a fluoride solution on 1-2 mm granular activated alumina modified by Fe2(SO4)3 solution was investigated. The experiments were conducted using a wide range of initial fluoride concentrations (0.5 to 180 mg•L1 at pH ~7.0) and an adsorbent dose of 1.0 g•L1. The application of Langmuir and Freundlich adsorption isotherm models (linear and nonlinear forms) generally showed that a single Langmuir or Freundlich equation cannot fit the entire concentration gap. Experimental data on low equilibrium concentrations (0.1 to 5.0 mg•L1) was in line with both Langmuir and Freundlich isotherm models, whereas that of high equilibrium concentrations (5.0 to 150 mg•L1) was more in line with the Freundlich isotherm model. A new Langmuir- Freundlich function was used for the entire concentration gap, as well as for low and high concentrations.     

响应面方法分析代谢产物对类人胶原蛋白表达的影响

Recombinant Escherichia coli BL21 is used to produce human-like collagen. The key constituents of media are optimized using response surface methodology (RSM). Before thermal induction, the highest biomass production and the lowest production of some hazardous by-products, especially acetic acid, were obtained in the media containing 0.085 mol∙L1 glucose and 0.019 mol∙L1 nitrogen (carbon-nitrogen ratio, 4.47︰1). After thermal induction, when the concentrations of glucose and nitrogen in the media were 0.065 mol∙L1 and 0.017 mol∙L1, respectively (carbon-nitrogen ratio, 3.82︰1), the productivity of human-like collagen per cell was the highest while that of acetic acid was the lowest. The extended analysis showed that the production of lactic acid and propionic acid increased while that of some intermediate acids of the tricarboxylic acid cycle decreased if the dose of glucose in-creased.     

P507溶于煤油作为载体的一种新型分散组合液膜对Eu3+的分离

The separation of Eu3+ is studied with a dispersion combined liquid membrane (DCLM), in which polyvinylidene fluoride membrane (PVDF) is used as the liquid membrane support, dispersion solution containing HCl solution as the stripping solution, and 2-ethyl hexyl phosphonic acid-mono-2-ethyl hexyl ester (P507) dissolved in kerosene as the membrane solution. The effects of pH value, initial concentration of Eu3+ and different ionic strength in the feed phase, volume ratio of membrane solution to stripping solution, concentration of HCl solution, concentration of carrier, different stripping agents in the dispersion phase on the separation are investigated. The optimum condition for separation of Eu3+ is that concentration of HCl solution is 4.0 mol•L1, concentration of carrier is 0.16 mol•L1, and volume ratio of membrane solution to stripping solution is 30︰30 in the dispersion phase, and pH value is 4.2 in the feed phase. The ionic strength has no significant effect on separation of Eu3+. Under the optimum condition, when the initial concentration of Eu3+ is 0.8×104 mol•L1, the separation percentage of Eu3+ is 95.3% during the separation time of 130 min. The kinetic equation is developed in terms of the law of mass diffusion and the theory of interface chemistry. The diffusion coefficient of Eu3+ in the membrane and the thickness of diffusion layer between feed phase and membrane phase are obtained and their values are 1.48×107 m2•s1 and 36.6 μm, respectively. The results obtained are in good agreement with literature data.     

椰油丙基酰胺甜菜碱/聚乙二醇水溶液的分相研究

Phase separation behavior of cocamidopropyl betaine/water/polyethylene glycol (PEG) system was studied. The effects of concentration and molecular weight of PEG on the phase separation behavior were investigated. Clouding occurred when the con-centration of PEG was large enough in the betaine aqueous solution, and the concentration of PEG at cloud point decreased with the increase of PEG molecular weight for a constant betaine concentration. The bottom phase was the PEG-rich phase, and the upper phase was the betaine-rich phase. The volumetric ratio of PEG-rich phase to betaine-rich phase, at the same difference between the PEG concentration and the one at the cloud point, Ccp (0.1 g•ml－1), decreased as the PEG molecular weight increased and approached 1 for higher PEG molecular weight (about 20000), which was similar to the typical aqueous two-phase system. This volumetric ratio depended on the initial PEG concentration, but independent of PEG molecular weight. The concentration ratio of betaine to PEG in both phases depended on the Ccp, independent of PEG molecular weight.     

A型分子筛对甲烷水合物生成的影响

The porous medium has an important effect on hydrate formation. In this paper, the formation process and the gas storage capacity of the methane hydrate were investigated with A-type zeolite and Sodium Dodecyl Sulfate (SDS) existing in the system. The results show that A-type zeolite can influence methane hydrate formation. At the temperature of 273.5 K and pressure of 8.3 MPa, the distilled water with A-type zeolite can form methane hydrate with gaseous methane in 12 hours. The formation process of the system with A-type zeolite was quite steady and the amount of A-type zeolite can influence the gas storage capacity significantly. The adding of A-type zeolite with 0.067 g•(g water)－1 into 2×10－3 g•g－1 SDS-water solution can increase the gas storage capacity, and the maxi-mum increase rate was 31%. Simultaneously the promotion effect on hydrate formation of 3A-type zeolite is much more obvious than that of 5A-type zeolite when the water adding amounts are 0.033 g•g－1 and 0.067 g•g－1 at the experimental conditions.     

常压下二乙二醇单乙醚和水二元体系不同温度下的密度、黏度及过量性质

Densities and viscosities were measured as a function of composition for binary liquid mixture of diethylene glycol monoethyl ether [CH3CH2O(CH2)2O(CH2)2OH] + water from 293.15 to 333.15 K at atmospheric pressure, with a capillary pycnometer and Ubbelohde capillary viscometer respectively. From the experimental data, the excess molar volume VE, viscosity deviation η, and the excess energy of activation for viscous flow G*E were calculated. These data were correlated by the Redlich-Kister type equa-tions to obtain the coefficients and standard deviations. The results showed a strong molecular interaction between diethylene glycol monoethyl ether and water.     

Liquid-Liquid Equilibria of Water Butyric Acid Nonanol Ternary System

Liquid-liquid equilibrium (LLE) data for the water butyric acid nonanol system have been determined experimentally at the temperatures of 298.15 K, 308.15 K and 318.15 K. Tie-line compositions were correlated by Othmer-Tobias method. The universal quasichemical functional group activity coefficient (UNIFAC) and modified UNIFAC methods were used to predict the phase equilibrium in the system using the interaction parameters between CHs, CH2, COOH, OH and H2O functional groups. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

交联壳聚糖磁性颗粒吸附去除水溶液中的铜

The performance of cross-linked magnetic chitosan, coated with magnetic fluids and cross-linked with epichlorohydrin, was investigated for the adsorption of copper (II) from aqueous solutions. Infrared spectra of chitosan before and after modification showed that the coating and cross-linking are effective. Experiments were performed at different pH of solution and contact time, and appropriate conditions for the adsorption of Cu(II) were determined. Experimental equilibrium data were correlated with Langmuir and Freundlich isotherms for determination of the adsorption potential. The results showed that the Langmuir isotherm was better compared with the Freundlich isotherm, and the uptake of Cu(II) was 78.13 mg•g－1. The kinetics of adsorption corresponded with the first-order Langergren rate equation, and Langergren rate constants were determined.     

25℃下Na+,K+,Mg2+//Cl-,NO-3-H2O五元体系液固相平衡

The solubilities of the quinary system Na + ,K + ,Mg 2+ //Cl ,NO 3 -H2O and its two quaternary subsystems, Na + ,K + ,Mg 2+ //NO 3 -H2O and K + ,Mg 2+ //Cl ,NO 3 -H2O,were studied by isothermal method at 25°C and their phase diagrams were plotted.In the equilibrium phase diagram of quaternary system Na + ,K + ,Mg 2+ //NO 3 -H2O, there are one invariant point,three univariant curves and three regions of crystallization with one salt:NaNO3, KNO3 and Mg(NO3)2·6H2O.In the equilibrium phase diagram of quaternary system K + ,Mg 2+ //Cl ,NO 3 -H2O,there are three invariant points,seven univariant curves and five regions of crystallization with one salt:KNO3,KCl, Mg(NO3)2·6H2O,MgCl2·6H2O and KCl·MgCl2·6H2O.In the equilibrium phase diagram of the quinary system Na + , K + ,Mg 2+ //Cl ,NO 3 -H2O,there are four invariant points,and seven regions of crystallization with one salt:NaCl, KCl,NaNO3,KCl·MgCl2·6H2O,KNO3,MgCl2·6H2O and Mg(NO3)2·6H2O.     

Liquid+liquid equilibria of ternary water+carboxylic acid+solvent systems at 288.15 K

The experimental liquid-liquid equilibrium (LLE) data for six ternary systems containing (chloroform+propionic acid+water), (chloroform+acetic acid+water), (diethyl ether+propionic acid+water), (diethyl ether+acetic acid+water), (trichloroethylene+propionic acid+water) and (trichloroethylene+acetic acid+water) were measured at 288.15 K and at atmospheric pressure. An accurate and simple titration method was used for determining of the concentration of carboxylic acid in the both liquid phases at equilibrium. The reliability of the experimental tie-line data was confirmed by using the Othmer-Tobias correlation. The distribution coefficients and selectivity factors were presented to evaluate the efficiency of the solvents for extraction of carboxylic acid from water. The results show that chloroform and diethyl ether are satisfactory solvents for extraction of carboxylic acids from water. Trichloroethylene separates propionic acid from water; however, it cannot be used as a solvent for separation of acetic acid.     

Phase Equilibria of the Ternary System Water + Propionic Acid + 2-Butanol

Abstract

Liquid–liquid equilibria for the ternary system water + propionic acid + 2-butanol was measured over a temperature range of 298 to 318 K. The results were used to estimate the interaction parameters between each of the three compounds for the nonrandom, two liquid (NRTL) equilibrium model as a function of temperature. The estimated interaction parameters were successfully used to predict the equilibrium compositions by the NRTL model. Based on this work, the distribution coefficients were also calculated and compared with the experimental values.     

常压盐溶液脱硫石膏转化生成α-半水石膏

Direct phase transformation of flue gas desulfurization gypsum in hot salt solution at atmospheric pres-sure was investigated.The effects of temperature,salt species,salt concentration,solids content,pH and modifier were examined.The crystals obtained under different conditions and solubility of calcium sulfate in contact with solid gypsum were also determined.α-Calcium sulfate hemihydrate crystals of stubby columnar shape and regular pentahedral sides were obtained under the following conditions:salt concentration 20%-30%,operation tempera-ture 95-100 °C,solids mass content in the slurry 10%-30% and neutral pH.Thermodynamic analysis revealed that phase transformation of calcium sulfate dihydrate to α-calcium sulfate hemihydrate occurs because of the difference in solubilities between the two solid gypsum phases in this system.     

Liquid-liquid equilibrium for the ternary systems of solvents+water+propionic acid at 25 ‡C and atmospheric pressure

Liquid-liquid equilibrium data for the ternary systems of toluene+water+propionic acid, o-xylene+water +propionic acid, methyl isobutyl ketone+water+propionic acid, ethyl acetate+water+propionic acid, and 1-butanol +water+propionic acid were measured at 25 ‡C and atmospheric pressure. The reliability of the experimental tie-line data was ascertained by means of the Othmer-Tobias, Bachman-Brown, and Hand correlations. For the extraction effectiveness of solvents, the distribution and selectivity curves were plotted. In addition, these experimental tie-line data were also correlated with NRTL and UNIQUAC models.     

改性大豆皮吸附剂对Pb2+的生物吸附性能研究

Using soybean hull residue after the soluble dietary fiber being removed during the soybean processing industry as crude material,a novel absorbent,modified soybean hulls,is prepared.Its adsorption behavior for Pb2+ is studied.The adsorbent has a large and efficient adsorption capacity for Pb2+,up to 20% of the mass of dry ad-sorbent.Its maximum adsorption capacity for Pb2+ reaches 217 mg·g-1 at initial Pb2+ concentration of 2000 mg·L-1,which is twice that of yeast absorbent and threefold greater than that of chitosan absorbent.The adsorption ability is sensitive to pH value in the solution and the optimal pH for adsorption of Pb2+ is 7.0.In the presence of other metal ions (Ca2+,Mg2+ and Na+) in the solution,their effect on the adsorption capacity for Pb2+ is not obvious.After 5 cy-cles of adsorption,80% adsorption capacity of Pb2+ is maintained.Compared with various available commercial resins,the modified soybean hulls are a plentiful,inexpensive and effective medium for the capture of dissolved Pb2+ from waste streams.     

通过抑制酿酒酵母乙醇发酵中的甘油产率提高乙醇产率

In ethanol fermentation of Saccharomyces cerevisiae （S. cerevisiae）, glycerol is one of the main by-products. The purpose of this investigation was to increase ethanol yield through minimizing glycerol yield by using mutants in which FPS1 encoding a channel protein that mediates glycerol export and GPD2 encoding one of glycerol-3-phosphate dehydrogenase were knocked-out using one-step gene replacement. GLT1 and GLN1 that encode glutamate synthase and glutamine synth.etase, respectively,were overexpressed using two-step gene replacment in fpsl△gpd2△ mutant.The fermentation properties of ZAL69（fpsl△：：LEU2 gpd2△：：URA3） and ZAL808 （fps1△：：LEU2 gpd2△：：URA3 PPGK1-GLT1 PPGK1-GLN1） under microaerobic conditions were investigated and compared with those of wild type（DC124）. Consumption of glucose, yield of ethanol, yield of glycerol, acetic acid, and pyruvic acid were monitored. Compared with wild type, the ethanol yield of ZAL69 and ZAL808 were improved by. 13.17% and 6.66 %, respectively, whereas glycerol yield decreased by 37.4 % and 41.7 %. Meanwhile, acetic acia yield and pyruvic acid yield aecreasea aramatlcally comparea to wild type. Our results indicate that FPS1 and GPD2 deletion of S. cerevisiae resulted in reduced glycerol yield and increased ethanol yield, but simultaneous overexpression of GLT1 and GLN1 infps1△gpd2△ mutant did not have a higher ethanol yield thanfps1△gpd2△ mutant.     

PAAAM高吸水树脂在盐液中吸水及吸附性能

引言 高吸水树脂是能吸收水达自身的几十倍乃至上千倍的功能高分子材料,它的基本用途是作为吸水和保水材料[1-2].     

表面活性素集成生产过程(Ⅲ)吸附柱的模型

The study is focused on modeling of separation process and optimization.An adsorption separation process is simulated.The surfactin production process by Bacillus subtilis ATCC 21332 followed by surfactin adsorption in a fixed-bed column packed with commercial active carbon is studied in laboratory.The adsorption column achieves high surfactin recovery(94%)by up-flow methanol elution at 25°C.The adsorption column is simulated with a complex one-dimensional plug flow dispersion model coupled with nonlinear adsorption equilibrium,based on the assumption that the adsorption of surfactin is monomolecular layer and no micelle is formed.The molecular diffusion coefficient of surfactin in water solution with electric neutrality is estimated to be 0.428×10 -5 cm 2 ·s -1 by molecular dynamics simulation.The model developed can describe the complex interplay of adsorption kinetics,fluid dynamics,and mass-transfer phenomena based on the assumption of no radial temperature and concentration gradients,and is of adequate precision.The work involved in this paper is valuable for the optimization of the production process of surfactin.