利用天然浓缩丹宁合成新型凝胶吸附剂通过表面沉淀去除水溶液中铅

Lead has caused serious environmental pollution due to its toxicity, accumulation in food chains and persistence in nature. In this paper, removal of lead from aqueous solutions is investigated using a novel gel adsorbent synthesized from natural condensed tannin. The novel adsorbent performs in aqueous solutions as a weak base with valid basic groups of 1.2mmol·g-1 tannin gel particles and therefore results in the elevation of pH value of aqueous solutions. Even when initial pH is 3.6, final pH at equilibrium can climb up to 6.5 that is above the pH value for Pb(OH)2 precipitation formation and then lead can be removed from wastewater by this so-called surface precipitation. The adsorption isotherm can be expressed by the Langmuir equation and the maximum capacity for adsorption of Pb is up to 92 mg·g-1 (based on dry adsorbent) when initial pH value is 3.6. Hence, the adsorbent does offer favorable properties in lead removal with respect to its high adsorption capacity at low initial pH value, which     

杏核的活性壳：一种用于黄金回收的有价值的吸附剂

Activated carbon has been proven to be an effective adsorbent for the recovery of a wide variety of metal ions from aqueous solutions. In this research, the activated hard shell of Iranian apricot stones was used for gold recovery from electro-plating wastewater. The effect of parameters such as dose and particle size of adsorbent,pH, agitation speed of mixing on the gold recovery was investigated. The results showed that under the optimum operating conditions more than 98% of gold ions were adsorbed onto activated carbon after just 3 h. In addition, the adsorbed gold could be eluted from this adsorbent by improved striping method. The process involves contact of gold-laden adsorbent with a strong base at ambient temperatures followed by elution with an aqueous solution containing an organic solvent. It was found that activated hard shell of apricot stones has the potential to replace im ported commercial activated carbons in gold adsorption processes.     

菌丝体-甲壳素水处理剂对重金属离子吸附性能的研究

The adsorption properties of chitin adsorbent from mycelium of fermentation industries for the removal of heavy metal ions were studied.The result shows that the chitin adsorbent has high adsorption capacity for many heavy metal ions and Ni^2 in citric acid.The influence of pH was significant:When pH is higher than 4.0,the high adsorption capacity is obtained.otherwise H^ ion inhibits the adsorption of heavy metal ions.The comparison of the chitin adsorbent with some other commercial adsorbents was made,in which that the adsorption behavior of chitin adsorbent is close to that of commercial cation exchange adsorbents,and its cost is much lower than those commercial adsorbents.     

Adsorption removal of o-nitrophenol and p-nitrophenol from wastewater by metal–organic framework Cr-BDC

In the present paper, a metal–organic framework Cr-BDC was prepared and used as adsorbent for adsorption of o-nitrophenol(ONP) and p-nitrophenol(PNP) from aqueous solutions. Cr-BDC was characterized by scanning electron microscopy, transmission electron microscope, X-ray diffraction and BET methods. The results indicate that Cr-BDC gets a very large specific surface area of 4128 m~2·g~(-1)and pore sizes are concentrated in 1 nm, which is a benefit for using for wastewater treatment. The influences of the adsorption conditions, such as temperature,solution concentration, adsorption time and reusability on adsorption performance were investigated. Cr-BDC exhibited an encouraging uptake capacity of 310.0 mg·g~(-1)for ONP, and adsorption capacity of Cr-BDC for ONP is significantly higher than that for PNP under suitable adsorption conditions. The characterizations of adsorption process were examined with the Lagergren pseudo-first-order, the pseudo-second-order kinetic model, and the intra-particular diffusion model. Kinetics experiments indicated that the pseudo-second-order model displayed the best correlation with adsorption kinetics data. Furthermore, our adsorption equilibrium data could be better described by the Freundlich equation. The results indicate that the as-prepared Cr-BDC is promising for use as an effective and economical adsorbent for ONP removal.     

Nickel(Ⅱ) removal from water using silica-based hybrid adsorbents:Fabrication and adsorption kinetics

A series of novel silica-based hybrid adsorbents were prepared by the crosslinking reaction of N-[3-(trimethoxysilyl)propyl] ethylene diamine(TMSPEDA) with epichlorohydrin(ECH) via a sol–gel process.Fourier transform infrared(FTIR) spectra confirmed that the reaction occurred.TGA curves showed that the thermal stability of these hybrid adsorbents reached as high as 180 °C.As a typical example,the adsorption performance of nickel(II) ions onto an adsorbent(the volume ratio of TMSPEDA and ECH was 4:1) was explored.It was found that the adsorption of nickel(II) ions onto this adsorbent followed the Lagergren pseudo-second-order kinetic model.The investigation of the adsorption mechanism demonstrated that nickel(II) adsorption was chiefly controlled by diffusion–chemisorption,suggesting that more diffusion processes were involved in the adsorption of nickel(II) ions onto this type of adsorbents.Desorption experiment indicates that these hybrid adsorbents can be regenerated.These findings reveal that this type of silica-based hybrid adsorbent is promising in the separation and recovery of nickel(II) ions from Ni-containing wastewater or contaminated water.     

Faujasite zeolite decorated with cobalt ferrite nanoparticles for improving removal and reuse in Pb2+ ions adsorption

Water pollution caused by heavy metals ions has been gaining attention in recent years, increasing the interest in the development of methodologies for their efficient removal focusing on the adsorption process for these purposes. The current challenge faced by adsorption processes is the adequate adsorbent immobilization for removal and reuse. Thus, the present work aimed at producing a faujasite zeolite nanocomposite decorated with cobalt ferrite nanoparticles for Pb~(2+) ions adsorption in an aqueous medium improving magnetic removal and reuse.As a result, a high surface area(434.4 m~2·g~(-1)) for the nanocomposite and an 18.93 emu·g~(-1) saturation magnetization value were obtained, indicating magnetic removal in a promising material for adsorption process. The nanocomposite regeneration capacity evaluated by magnetic recovery after 24 h suspension presented a high Pb~(2+) ion adsorptive capacity(98.4%) in the first cycle. Around 98% of the Pb~(2+) ions were adsorbed in the second cycle. In this way, the synthesized faujasite:cobalt ferrite nanocomposite reveals itself as a promising alternative in adsorption processes, aiming at a synergic effect of FAU zeolite high adsorptive activity and the cobalt ferrite nanoparticles magnetic activity, allowing for adsorbent recovery from the aqueous medium via magnetic force and successive adsorptive cycles.     

改性大豆皮吸附剂对Pb2+的生物吸附性能研究

Using soybean hull residue after the soluble dietary fiber being removed during the soybean processing industry as crude material,a novel absorbent,modified soybean hulls,is prepared.Its adsorption behavior for Pb2+ is studied.The adsorbent has a large and efficient adsorption capacity for Pb2+,up to 20% of the mass of dry ad-sorbent.Its maximum adsorption capacity for Pb2+ reaches 217 mg·g-1 at initial Pb2+ concentration of 2000 mg·L-1,which is twice that of yeast absorbent and threefold greater than that of chitosan absorbent.The adsorption ability is sensitive to pH value in the solution and the optimal pH for adsorption of Pb2+ is 7.0.In the presence of other metal ions (Ca2+,Mg2+ and Na+) in the solution,their effect on the adsorption capacity for Pb2+ is not obvious.After 5 cy-cles of adsorption,80% adsorption capacity of Pb2+ is maintained.Compared with various available commercial resins,the modified soybean hulls are a plentiful,inexpensive and effective medium for the capture of dissolved Pb2+ from waste streams.     

用海藻类生物吸附剂去除废水中的重金属离子——一种经济型新技术

Heavy metal pollution from industrial wastewater is a worldwide environmental issue. Biosorption of heavy metals by using biosorbents derived from various types of biomass has been shown to be effective for the uptake of heavy metal ions. In this study, biosorbents derived from the biomass of a group of marine macroalgae were used for the removal and recovery of heavy metal ions from aqueous solutions. Results indicated that the biosorbents have high uptake capacities and affinities for a number of heavy metal ions. The uptake capacities of the biosorbents were in the range of 1.0 to 1.5mmol·g-1 for divalent heavy metal ions. The kinetics of the uptake process was fast and the process can be used in both batch and fixed-bed operations. It appears that the biosorption process by using biosorbents from marine macroalgae can be an efficient and cost effective technology for the treatment of heavy metal containing wastewater.     

交联氧化铝-壳聚糖新杂化吸附剂的制备及去除废水中Cu(Ⅱ)(英文)

A novel biosorbent was developed by coating chitosan,a naturally and abundantly available biopolymer,on to activated alumina based on oil shale ash via crosslinking.The adsorbent was characterized by various techniques,such as Fourier transform infrared spectroscopy,scanning electron microscopy,thermogravimetric-differential thermal analysis,and X-ray photoelectron spectroscope.Batch isothermal equilibrium adsorption experiments were condcted to evaluate the adsorbent for the removal of Cu(Ⅱ) from wastewater.The effect of pH and agitation time on the adsorption capacity was also investigated,indicating that the optimum pH was 6.0.The equilibrium adsorp-tion data were correlated with Langmuir and Freundlich models.The maximum monolayer adsorption capacity of chitosan coated alumina sorbent as obtained from Langmuir adsorption isotherm was found to be 315.46 mg·g-1 for Cu(Ⅱ).The adsorbent loaded with Cu(Ⅱ) was readily regenerated using 0.1 mol?L?1 sodium hydroxide solution.All these indicated that chitosan coated alumina adsorbent not only have high adsorption activity,but also had good stability in the wastewater treatment process.     

Mechanically activated starch magnetic microspheres for Cd(Ⅱ) adsorption from aqueous solution

Magnetic starch microspheres(AAM-MSM) were synthesized via an inverse emulsion graft copolymerization by using mechanically activated cassava starch(MS) as a crude material, acrylic acid(AA) and acrylamide(AM) as graft copolymer monomers, and methyl methacrylate(MMA) as the dispersing agent and used as an adsorbent for the removal of Cd(II) ions from aqueous solution. Fourier-transform infrared spectroscopy(FT-IR), X-ray photoelectron spectroscopy(XPS), scanning electron microscopy(SEM), and vibrating sample magnetometry(VSM) were used to characterize the AAM-MSM adsorbent. The results indicated that AA, AM, and MMA were grafted to the MS, and the Fe_3 O_4 nanoparticles were encapsulated in the AAM-MSM adsorbent microspheres.The adsorbent exhibited a smooth surface, uniform size, and good sphericity because of the addition of the MMA and provided more adsorption sites for the Cd(II) ions. The maximum adsorption capacity of Cd(II) on the AAM-MSM was 39.98 mg·g~(-1). The adsorbents were superparamagnetic, and the saturation magnetization was 16.7 A·m~2·kg~(-1). Additionally, the adsorption isotherms and kinetics of the adsorption process were further investigated. The process of Cd(II) ions adsorbed onto the AAM-MSM could be described more favorably by the pseudo-second-order kinetic and Langmuir isothermal adsorption models, which suggested that the chemical reaction process dominated the adsorption process for the Cd(II) and chemisorption was the rate-controlling step during the Cd(II) removal process.     

硫酸铁改性颗粒活性氧化铝除氟的等温线研究

The adsorption equilibrium of a fluoride solution on 1-2 mm granular activated alumina modified by Fe2(SO4)3 solution was investigated. The experiments were conducted using a wide range of initial fluoride concentrations (0.5 to 180 mg•L1 at pH ~7.0) and an adsorbent dose of 1.0 g•L1. The application of Langmuir and Freundlich adsorption isotherm models (linear and nonlinear forms) generally showed that a single Langmuir or Freundlich equation cannot fit the entire concentration gap. Experimental data on low equilibrium concentrations (0.1 to 5.0 mg•L1) was in line with both Langmuir and Freundlich isotherm models, whereas that of high equilibrium concentrations (5.0 to 150 mg•L1) was more in line with the Freundlich isotherm model. A new Langmuir- Freundlich function was used for the entire concentration gap, as well as for low and high concentrations.     

海藻酸镧颗粒除氟研究：吸附剂物性和吸附机理

Lanthanum alginate bead is a new, highly active adsorbent. In the present study, we investigated its ad- sorption performance and its adsorption mechanism. The adsorption isotherm for fluoride onto lanthanum alginate b ead fits the Langmuir model well, and the maximum adsorption capacity is 197.2 mg·g-1. X-ray diffraction shows the amorphous nature of lanthanum alginate bead, which allows for better accessibility to fluoride and thus better activity. Infrared spectra of lanthanum alginate bead before and after adsorption confirm its stable skeletal structure. Scanning electron microscopy shows that the dense surface structure of the adsorbent appear cracks after adsorption. T he adsorption mechanism of lanthanum alginate bead is considered as an ion exchange between F- and Cl- or OH-, as verified from the adsorbent and the solution by pH effect, energy dispersive X-ray, and ion chromatography.     

重组尿苷磷酸化酶的诱导及其在嘧啶核苷生物合成中的应用

Recombinant Escherichia coli pUDP,which overexpressed uridine phosphorylase(UPase),was constructed.0.5 mmol·L 1lactose had a similar induction effect as the commonly used inducer IPTG during 2.5-5.5 h of cell growth.The lactose-induced UPase was stable at 50°C.Wet cells of pUDP was used as catalyst to biosynthesize 5-fluorouridine from 30 mmol·L 1uridine and 5-fluorouracil in phosphate buffer(pH 7.0)catalyzed at 50°C for 1.5 h and the yield of 5-fluorouridine was higher than 68%.Under the optimum reaction conditions for production of 5-fluorouridine,5-methyluridine and azauridine were synthesized from uridine by pUDP,the yield was 61.7%and 47.2%respectively.Deoxynucleosides were also synthesized by pUDP,but the yield was only about 20%.     

25℃下Na+,K+,Mg2+//Cl-,NO-3-H2O五元体系液固相平衡

The solubilities of the quinary system Na + ,K + ,Mg 2+ //Cl ,NO 3 -H2O and its two quaternary subsystems, Na + ,K + ,Mg 2+ //NO 3 -H2O and K + ,Mg 2+ //Cl ,NO 3 -H2O,were studied by isothermal method at 25°C and their phase diagrams were plotted.In the equilibrium phase diagram of quaternary system Na + ,K + ,Mg 2+ //NO 3 -H2O, there are one invariant point,three univariant curves and three regions of crystallization with one salt:NaNO3, KNO3 and Mg(NO3)2·6H2O.In the equilibrium phase diagram of quaternary system K + ,Mg 2+ //Cl ,NO 3 -H2O,there are three invariant points,seven univariant curves and five regions of crystallization with one salt:KNO3,KCl, Mg(NO3)2·6H2O,MgCl2·6H2O and KCl·MgCl2·6H2O.In the equilibrium phase diagram of the quinary system Na + , K + ,Mg 2+ //Cl ,NO 3 -H2O,there are four invariant points,and seven regions of crystallization with one salt:NaCl, KCl,NaNO3,KCl·MgCl2·6H2O,KNO3,MgCl2·6H2O and Mg(NO3)2·6H2O.     

含酚废水处理的吸附和臭氧氧化动力学模型

A three phase fluidized bed reactor was used to investigate the combined effect of adsorption and oxidation for phenolic wastewater treatment.Aqueous solutions containing 10 mg·L 1of phenol and ozone were continuously fed co-currently as upward flow into the reactor at constant flow rate of 2 and 1 L·min1,respectively.The phenolic treatment results in seven cases were compared:(a)O3 only,(b)fresh granular activated carbon(GAC),(c) 1st reused GAC,(d)2nd reused GAC,(e)fresh GAC enhanced with O3,(f)1st reused GAC enhanced with O3,and (g)2nd reused GAC enhanced with O3.The phenolic wastewater was re-circulated through the reactor and its concentration was measured with respect to time.The experimental results revealed that the phenolic degradation using GAC enhanced with O3 provided the best result.The effect of adsorption by activated carbon was stronger than the effect of oxidation by ozone.Fresh GAC could adsorb phenol better than reused GAC.All cases of adsorption on GAC followed the Langmuir isotherm and displayed pseudo second order adsorption kinetics.Finally,a differential equation for the fluidized bed reactor model was used to describe the phenol concentration with respect to time for GAC enhanced with O3.The calculated results agree reasonably well with the experimental results.     

用活性炭吸附强化超滤过程脱除废水中染料的研究(英文)

In this study, orange G dye was efficiently removed from aqueous solution by ultrafiltration (UF) mem-brane separation enhanced with activated carbon adsorption. The powdered activated carbon (PAC) was deposited onto the UF membrane surface, forming an intact filter cake. The enhanced UF process simultaneously exploited the high water permeation flux of porous membrane and the high adsorption ability of PAC toward dye molecules. The influencing factors on the dye removal were investigated. The results indicated that with sufficient PAC incor-poration, the formation of intact PAC filtration cake led to nearly complete rejection for dye solution under opti-mized dye concentration and operation pressure, without large sacrificing the permeation flux of the filtration process. Typically, the dye rejection ratio increased from 43.6% for single UF without adsorption to nearly 100% for the en-hanced UF process, achieving long time continuous treatment with water permeation flux of 47 L·m 2·h 1. The pre-sent study demonstrated that adsorption enhanced UF may be a feasible method for the dye wastewater treatment.     

利用两级UASB消化处理实现木薯燃料乙醇的水循环型生产

Considering limited success in target-hitting discharge from alcohol industry, our attention was directed toward a recycling use of distillery spentwash (DS) in cassava bioethanol production by using a two-stage up-flow anaerobic sludge blanket bioremediation (TS-UASBB). With the TS-UASBB, , COD, N and P in the effluent from the DS degraded significantly and their concentrations were kept at 0.2 g•L1, 2.0 g•L1, 1.0 g•L1 and 15 mg•L1, respectively, in 13 batch processes for water-recycled ethanol fermentation. With the effluent used directly as dilution water, no heat-resistant bacteria were found alive. The thirteen-batch ethanol production individually achieved 10% after 48 h fermentation. The starch utilization ratio and total sugar consumption were 90% and 99.5%, respectively. The novel water-recycled bioethanol production process with ethanol fermentation and TS-UASBB has a considerable potential in other starchy and cellulosic ethanol production.     

L-半胱氨酸浓度对氧化还原电位和生物产氢过程的影响(英文)

The effects of L-cysteine concentration on biohydrogen production by Enterobacterium Bacterium M580 were investigated in batch cultivation.The experimental results showed that L-cysteine could enhance the cell growth,hydrogen production rate and hydrogen yield when its concentration was less than 500 mg·L-1,while it had negative effects when its concentration was higher than 500 mg·L-1.The hydrogen production was the highest 1.29 mol·mol-1(H2/glucose) when 300 mg·L-1L-cysteine was added into the culture,and the yield was 9.4% higher than that in the control.The oxidation-reduction potential(ORP) ,which was influenced by L-cysteine,also affected hydrogen production.The ORP values were in the range-300 mV to-150 mV when the L-cysteine concentration was higher than 500 mg·L-1.Although the ORP in this range was favorable for hydrogen production,it was not suitable for the biomass growth.Hence,less hydrogen was produced.When the L-cysteine concentration was lower than 500 mg·L-1,the ORP was more suitable for both biomass growth and hydrogen production.In addition,at least 91%glucose was consumed when L-cysteine was added to the culture media,compared to the 97.37% consumption without L-cysteine added.     

硼氢化物催化水解制氢作为燃料电池氢源(英文)

Borohydrides present interesting options for the electrochemical power generation acting either as hydrogen source or anodic fuel for direct borohydride fuel cells(DBFC).In this work,Mg-Ni composite synthesized by mechanically alloying method,used as the catalyst for the hydrolysis of borohydride,has been investigated.Co-doping treatment has been carried out for the purpose of improving the hydrolysis rate further.The as-prepared and Co-doped Mg-Ni composites with low cost showed high catalytic activity to the hydrolysis of borohydride for hydrogen generation.After Co-doping,the hydrogen generation rate was around 280 ml·g-1·min-1.Borohydride would be a promising hydrogen source for fuel cells.