MATLAB与FORTRAN混合编程接口程序技术的研究

介绍了FORTRAN与MATLAB的各自优势与不足，以及它们之间混合使用的必要性；分析了二种程序混合编程的接口技术以及动态连接函数MEX文件的构建和使用方法，并且用实例阐述了MEX文件的具体编写。     

MATLAB与FORTRAN混合编程接口程序技术的研究

介绍了FORTRAN与MATLAB的各自优势与不足,以及它们之间混合使用的必要性;分析了二种程序混合编程的接口技术以及动态连接函数MEX文件的构建和使用方法,并且用实例阐述了MEX文件的具体编写。     

MFC应用程序框架封装技术在Matlab/Simulink中的应用

介绍了一种将信号实时动态显示单文档-视图应用程序框架封装成动态链接库的方法,并应用到Matlab/Simulink中.Matlab C MEX S-函数,调用该动态库已实现的功能,开发了一个实时显示Simulink模块.     

MATLAB外部网络接口的实现

MATLAB是一个高级的数学分析和计算软件，它在科技领域的应用越来越广泛。但是，由于它不支持网络通信功能，使其在当今网络化时代的应用受到限制。文中提出了一种利用MATLAB外部函数接口(MEX动态链接函数接口)，解决MATLAB不支持网络数据传输的方案，通过试验证明该方法是可行的。     

新型C MEX函数设计MMC整流器控制软件研究

常见的C MEX函数局限于对控制系统局部子函数的C代码验证,不能实现整体方案设计;并且与DSP芯片的软件语法不兼容,无法进行代码移植与实验。提出一种新型多文件结构的C MEX函数,将主函数、算法单元模块、头文件合理分配,通过主函数调用子函数实现控制系统的整体设计。该代码以MMC整流器的电流矢量控制算法为基础,高度模拟了定点DSP芯片的语法规则,可实现对DSP芯片的高效移植。仿真与实验测试结果表明所述C MEX函数实现了电流的解耦控制,提高了软件设计集成度与效率。     

基于Simulink/MEX编程的MATLAB仿真教学动画演示

给出一种基于MATLABS函数和MEX编程的仿真过程动画显示模块实现方法,利用S函数实现动画显示窗口管理和动画帧的显示,通过MEX函数来利用其他编程语言和图形函数库实现动画帧便捷美观的绘制,最终实现仿真过程动画显示。通过此方法得到的S函数模块可集成到Simulink模型中,方便地提供仿真过程的动画演示。     

基于C MEX S函数的盲源分离仿真研究

在分析基于最大信噪比盲源分离算法数学模型的基础上,利用C语言编写S函数,并提出了基于最大信噪比盲源分离系统仿真建模的方法.在Matlab/Simulink中,构造C MEX S函数的简化结构,建立独立功能的模块(如中心化模块、白化处理模块、基于最大信噪比分离模块及后处理的排序模块等),再对各个功能模块进行有机的结合,从而搭建基于最大信噪比盲源分离系统仿真模型,为提高复杂系统模型的仿真速度,以及与仪器仪表结合的设计与调试提供了新的思路.仿真结果证明了采用C MEX S函数方式搭建模型的快速性与有效性.     

MEX文件在人工智能软件中的应用

在使用MATLAB软件进行人工智能领域中的研究开发工作对，常会遇到运行速度太慢的问题，合理地使用MEX文件可有效地解决此问题。本文介绍在Windows中基于C语言的MEX文件的应用方法，并以梵塔程序为例说明运用MEX文件可显著地优化软件运行效率，这在人工智能等领域的开发应用中有重要作用。     

MATLAB外部网络接口的实现

MATLAB是一个高级的数学分析和计算软件，它在科技领域的应用越来越广泛。但是，由于它不支持网络通信，使其在当今网络化时代的应用受到限制。文中提出了一种利用MATLAB外部函数接口(MEX动态链接函数接口)，解决这个问题的方案，通过试验证明该方法是可行的。     

在MATLAB环境下实现对硬件资源的访问

在MATLAB环境下对硬件资源如I／O端口或存储单元进行访问的方法进行讨论,通过MEX程序的设计,MATLAB可以访问硬件资源,与硬件进行数据交换,也可以在外部程序中调用MATLAB的函数.在MEX程序中需要将MATLAB下的数据格式进行转换为C语言可以处理的数据类型.最后,结合应用实例说明MEX程序的设计.     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。