Sorption of polycyclic aromatic hydrocarbons and polychlorinated biphenyls to soot and soot-like materials in the aqueous environment: mechanistic considerations

Recent studies have shown that sorption of polycyclic aromatic hydrocarbons (PAHs) in soot-water systems is exceptionally strong. As a consequence, soot may fully control the actual fate of PAHs in the aquatic environment. However, sorption has only been characterized for a limited number of PAHs to diesel soot, and the mechanism is poorly understood. In this paper, we present an extensive data set of sorbent-water distribution coefficients (K(S), n = 236) for a series of PAHs (both native and added) and polychlorinated biphenyls (PCBs) to five different types of soot and five soot-like materials. Both Ks values and physicochemical properties of the sorbents show large variation. In general, sorption is very strong, with K(S) values up to 10(10), showing the highest distribution coefficients on a mass basis ever reported. Sorption of in particular PAHs is often over 1000 times as strong as sorption to amorphous sedimentary organic carbon. The variation in K(S) values cannot be explained by "soot carbon fractions" or specific surface areas of the sorbents. Instead, values for native PAHs are mostly determined by the sorbates' molar volume, and values for added PAHs and PCBs are determined by the sorbents' average pore diameter. From differences in K(S) values between native and added PAH analogues, it can be deduced that generally more than 50% (with values up to 97%) of the native PAH concentration in soot is not available for distribution to the aqueous phase. We conclude that this is caused by physical entrapment of the chemicals within the solid matrix. Furthermore, most sorbents appear to preferentially sorb PCBs with planar configurations, a phenomenon most likely driven by sorption in molecular-sized pores. Pore sorption is also concluded to be the most important sorption mechanism for added PAHs together with pi-pi interaction processes with flat aromatic sorbent surfaces. Frequently observed, slowly desorbing, resistant contaminant fractions in sediments may very well be explained on the basis of these results.     

Supercritical fluid extraction of mononitrated polycyclic aromatic hydrocarbons from tea – correlation with the PAH concentration

 The ability of supercritical fluid extraction (SFE) to extract nitropolycyclic aromatic hydrocarbons (nitro-PAHs) from tea matrices is described and discussed. An experimental approach was set up to determine the influences of various extraction parameters, i. e. pressure, temperature, extraction time and addition of modifier. The evaluation of the method was carried out by analysing samples of fortified tea and then comparing the results with those obtained from conventional extraction procedures, such as Soxhlet extraction and ultrasonication. SFE proved to be far better than the conventional methods at monitoring levels of nitro-PAHs in tea. However, due to the wide range of polarity of the analytes investigated, selective extraction with supercritical carbon dioxide was not possible; hence, subsequent purification steps were necessary, prior to the final GC/MSD analyses. The nitro-PAHs and PAHs concentrations in several tea samples were determined, any correlation between nitro-PAHs and PAHs was studied and the results are presented in this article. Received: 13 January 1997 / Revised version: 21 February 1997     

Extraction of polycyclic aromatic hydrocarbons from soot and sediment: solvent evaluation and implications for sorption mechanism

Soot contains high levels of toxic compounds such as polycyclic aromatic hydrocarbons (PAHs). Extraction of PAHs from soot for quantitative analysis is difficult because the compounds are extremely tightly bound to the sorbent matrix. This study was designed to investigate the effect of solvent type on PAH extraction yield, to identify the most optimal solvent for PAH extraction from soot, and to gain insight into the mechanism of PAH sorption to soot in aquatic environments. To that end, different types of soot as well as coal, charcoal, and sediments containing soot-like material were extracted with seven organic solvents. Large differences in extraction recoveries were observed among solvents, with relative values as low as 16% as compared to the best extracting solvent. These differences were much larger for soot than for sediments. Dichloromethane, which to date is the most widely used solvent for soot and sediment extractions, appeared to be the overall worst extractant, whereas toluene/methanol (1:6) gave the best results. Based on extraction yields and solvent properties, extraction of PAHs from soot was explained by a two-step mechanism involving swelling of the sorbent matrix and subsequent displacement of sorbates by solvent molecules. Due to the low displacement capacity of water, desorption of PAHs from soot in the aquatic environment will be strongly limited. Moreover, a certain fraction of the total PAH mass on soot is suggested to be physically entrapped, making it unavailable for partitioning to the aqueous phase.     

Supercritical fluid extraction of mononitrated polycyclic aromatic hydrocarbons from tea – correlation with the PAH concentration

The ability of supercritical fluid extraction (SFE) to extract nitropolycyclic aromatic hydrocarbons (nitro-PAHs) from tea matrices is described and discussed. An experimental approach was set up to determine the influences of various extraction parameters, i.?e. pressure, temperature, extraction time and addition of modifier. The evaluation of the method was carried out by analysing samples of fortified tea and then comparing the results with those obtained from conventional extraction procedures, such as Soxhlet extraction and ultrasonication. SFE proved to be far better than the conventional methods at monitoring levels of nitro-PAHs in tea. However, due to the wide range of polarity of the analytes investigated, selective extraction with supercritical carbon dioxide was not possible; hence, subsequent purification steps were necessary, prior to the final GC/MSD analyses. The nitro-PAHs and PAHs concentrations in several tea samples were determined, any correlation between nitro-PAHs and PAHs was studied and the results are presented in this article.     

Predicting bioavailability of sediment polycyclic aromatic hydrocarbons to Hyalella azteca using equilibrium partitioning, supercritical fluid extraction, and pore water concentrations

Polycyclic aromatic hydrocarbon (PAH) bioavailability to Hyalella azteca was determined in 97 sediments from six former manufactured-gas plants and two aluminum smelter sites. Measurements of Soxhlet extractable, rapidly released based on mild supercritical fluid extraction, and pore water dissolved concentrations of 18 parent and 16 groups of alkyl PAHs (PAH34) were used to predict 28 daysurvival based on equilibrium partitioning and hydrocarbon narcosis models. Total PAH concentrations had little relationship to toxicity. Amphipods survived in sediments with PAH34 concentrations as high as 2990 microg/g, while sediments as low as 2.4 microg/g of PAH34 resulted in significant mortality. Equilibrium partitioning using either total extractable or rapidly released concentrations significantly improved predictions. However, pore water PAH34 concentrations were best for predicting amphipod survival and correctly classified toxic and nontoxic sediment samples with an overall model efficiency of 90%. Alkyl PAHs accounted for 80% of the toxicity, demonstrating that careful measurement of the 16 alkyl clusters in pore water is required. Regression analysis of the pore water PAH34 data from 97 field sediments against amphipod survival resulted in a mean 50% lethal residue value of 33 micromol/g of lipid, consistent with 32 micromol/g of lipid for fluoranthene determined by others in controlled laboratory conditions, thus demonstrating the applicability of EPA's hydrocarbon narcosis model when using pore water PAH34 concentrations.     

Recovery of aroma compounds from Zhenjiang aromatic vinegar by supercritical fluid extraction

Zhenjiang aromatic vinegar, which is produced from sticky rice through solid‐state fermentation, is highly prized as one of the four famous China‐style vinegars, owing to its unique flavour. In this study, a method of supercritical fluid extraction (SFE) was used for the first time to recover aroma compounds from Zhenjiang aromatic vinegar. For this purpose, the optimal conditions for the extraction of aroma compounds by SFE were determined as follows: CO₂ flow rate, 25 L h^?1; extraction time, 2 h; extraction pressure, 35 MPa; and extraction temperature, 323 K. Using headspace solid‐phase microextraction‐gas chromatography–mass spectrometry (HS‐SPME‐GC‐MS) analysis, a total of 49 and 44 aroma compounds were identified in Zhenjiang aromatic vinegar and its SFE extract, respectively. Acetic acid, ethyl acetate, furfural, phenethyl alcohol, tetramethyl‐pyrazine, 3‐hydroxybutanone and benzaldehyde were the main aroma compounds in the vinegar and its SFE extract. SFE is a fast and sensitive method to recovery aroma compounds from the vinegar.     

Anaerobic cometabolic transformation of polycyclic and heterocyclic aromatic hydrocarbons: evidence from laboratory and field studies

The sulfate-reducing enrichment culture N47 can grow on naphthalene or 2-methylnaphthalene as the sole carbon and energy source. Here we show that the culture can furthermore cometabolicallytransform a variety of polycyclic and heteroaromatic compounds with naphthalene or methylnaphthalene as the auxiliary substrate. Most of the cosubstrates were converted to the corresponding carboxylic acids, frequently to several isomers. The mass spectra of specific metabolites that were extracted from supernatants of cultures containing the cosubstrates benzothiophene, benzofuran, and 1-methylnaphthalene resembled known intermediates of the anaerobic naphthalene and 2-methylnaphthalene degradation pathways (i.e., naphthyl-2-methylsuccinic acid and naphthyl-2-methylenesuccinic acid). This indicates that some of the tested compounds were first methylated and then transformed to the corresponding methylsuccinic acids by a fumarate addition to the methyl group. For some of the cosubstrates, a partial or total inhibition of growth on the auxiliary substrate was observed. This was not caused by the toxicity of the individual cosubstrate itself, but by a specific combination of auxiliary substrate and cosubstrate. None of the cosubstrates tested could be utilized as the sole carbon source and electron donor by the enrichment culture N47. Field investigations at the tar-oil-contaminated aquifer, where strain N47 originated, revealed the presence of a number of metabolites similar to the ones identified in batch culture supernatants. Our findings suggest that aromatic hydrocarbons and heterocyclic compounds can be converted by aquifer organisms and produce a variety of polar compounds that become mobile in groundwater.     

Analysis of polycyclic aromatic hydrocarbons in fish: Optimisation and validation of microwave-assisted extraction

An accurate and sensitive method for determination of 18 polycyclic aromatic hydrocarbons (PAHs) (16 PAHs considered by USEPA as priority pollutants, dibenzo[a,l]pyrene and benzo[j]fluoranthene) in fish samples was validated. Analysis was performed by microwave-assisted extraction and liquid chromatography with photodiode array and fluorescence detection. Response surface methodology was used to find the optimal extraction parameters. Validation of the overall methodology was performed by spiking assays at four levels and using SRM 2977. Quantification limits ranging from 0.15–27.16 ng/g wet weight were obtained. The established method was applied in edible tissues of three commonly consumed and commercially valuable fish species (sardine, chub mackerel and horse mackerel) originated from Atlantic Ocean. Variable levels of naphthalene (1.03–2.95 ng/g wet weight), fluorene (0.34–1.09 ng/g wet weight) and phenanthrene (0.34–3.54 ng/g wet weight) were detected in the analysed samples. None of the samples contained detectable amounts of benzo[a]pyrene, the marker used for evaluating the occurrence and carcinogenic effects of PAHs in food.     

Pyrolytic formation of polycyclic aromatic hydrocarbons from sesquiterpenes

The products of the pyrolysis of four sesquiterpenes, β-caryophyllene, α-cedrene, longifolene and valencene, have been examined. Pyrolysis was carried out at 300, 400 and 500°C, the products determined by GC-MS and then examined for similarities and differences using multivariate data analysis. Analysis showed that longifolene was most resistant and caryophyllene least resistant to pyrolysis with cedrene and valencene occupying intermediate positions. While the compounds were largely unchanged at 300°C, polycyclic aromatic hydrocarbons (PAHs) were major components of the pyrolysates at 400 and 500°C. No less than nine of the 16 EPA priority pollutants were present in the pyrolysates at the higher temperatures.     

Removal of polycyclic aromatic hydrocarbons from water by migration into polyethylene

Water was spiked with three polycyclic aromatic hydrocarbons (PAHs) and filled into a steel diffusion chamber. Low-density polyethylene sheet combined of five polyethylene foils was used as a partition in the chamber. Depth of PAHs migration into the sheet was followed for 143 h, using high performance liquid chromatography with selective fluorimetric detection after extraction of PAHs from the foils peeled off. On the basis of the results obtained, the process of PAHs migration into PE was characterised as a one-dimensional diffusion into polyethylene bulk. The diffusion coefficients were calculated for individual compounds using the second Fick law. It was concluded that PAHs are primarily adsorbed on the polyethylene surface with subsequent migration into bulk polymer. Transportation of PAHs through the bulk can be described satisfactorily by Fickian laws of diffusion and is consistent with the theory of the depth adsorption of PAHs in polyethylene.     

Adsorption of polycyclic aromatic hydrocarbons by carbon nanomaterials

Carbon nanomaterials are novel manufactured materials, having widespread potential applications. Adsorption of hydrophobic organic compounds (HOCs) by carbon nanomaterials may enhance their toxicity and affect the fate, transformation, and transport of HOCs in the environment. In this research, adsorption of naphthalene, phenanthrene, and pyrene onto six carbon nanomaterials, including fullerenes, single-walled carbon nanotubes, and multiwalled carbon nanotubes was investigated, which is the first systematic study on polycyclic aromatic hydrocarbons (PAHs) sorption by various carbon nanomaterials. All adsorption isotherms were nonlinear and were fitted well by the Polanyi-Manes model (PMM). Through both isotherm modeling and constructing "characteristic curve", Polanyi theory was useful to describe the adsorption process of PAHs by the carbon nanomaterials. The three fitted parameters (Q0, a, and b) of PMM depended on both PAH properties and the nature of carbon nanomaterials. For different PAHs, adsorption seems to relate with their molecular size, i.e., the larger the molecular size, the lower the adsorbed volume capacity (Q0), but higher a and b values. For different carbon nanomaterials, adsorption seems to relate with their surface area, micropore volume, and the volume ratios of mesopore to micropore. Quantitative relationships between these sorbent properties and the estimated parameters of PMM were obtained. These relationships may represent a first fundamental step toward establishing empirical equations for quantitative prediction of PAH adsorption by carbon nanomaterials and possibly other forms of carbonaceous (geo-) sorbents, and for evaluating their environmental impact. In addition, high adsorption capacity of PAHs by carbon nanotubes may add to their high environmental risks once released to the environment, and result in potential alteration of PAHs fate and bioavailability in the environment.     

Atmospheric transport and outflow of polycyclic aromatic hydrocarbons from China

A potential receptor influence function (PRIF) model, based on air mass forward trajectory calculations, was applied to simulate the atmospheric transport and outflow of polycyclic aromatic hydrocarbons (PAHs) emitted from China. With a 10 day atmospheric transport time, most neighboring countries and regions, as well as remote regions, were influenced by PAH emissions from China. Of the total annual PAH emission of 114 Gg, 92.7% remained within the boundary of mainland China. The geographic distribution of PRIFs within China was similar to the geographic distribution of the source regions, with high values in the North China Plain, Sichuan Basin, Shanxi, and Guizhou province. The Tarim basin and Sichuan basin had unfavorable meteorological conditions for PAH outflow. Of the PAH outflow from China (8092 tons or 7.1% of the total annual PAH emission), approximately 69.9% (5655 tons) reached no further than the offshore environment of mainland China and the South China Sea. Approximate 227, 71, 746, and 131 tons PAHs reached North Korea, South Korea, Russia-Mongolia region, and Japan, respectively, 2-4 days after the emission. Only 1.4 tons PAHs reached North America after more than 9 days. Interannual variation in the eastward PAH outflow was positively correlated to cold episodes of El Ni?o/Southern Oscillation. However, trans-Pacific atmospheric transport of PAHs from China was correlated to Pacific North America index (PNA) which is associated with the strength and position of westerly winds.     

Determination of polycyclic aromatic hydrocarbons in edible seafood by QuEChERS-based extraction and gas chromatography-tandem mass spectrometry

A high-throughput analysis of polycyclic aromatic hydrocarbons (PAHs) in edible seafood using QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) based extraction and gas chromatography-tandem mass spectrometry (GC-MS/MS) was developed and validated in 4 seafood matrices--crab, finfish, oyster, and shrimp. The extraction employs QuEChERS with dispersive solid phase extraction (dSPE) using cleanup sorbent that includes C18. The acetonitrile extract is partitioned into hexane and analyzed by GC-MS/MS. The procedure was validated by spike recovery experiments of 15 parent and 5 substituted PAHs at 5ppb and 25 ppb levels in the 4 matrices. Recoveries were 71%-130% with RSDs less than 14%. The limit of quantitation (LOQ) for benzo[a]pyrene are 0.4-2.5 ppb depending on matrix. For all 15 parent PAHs the LOQs are less than 10% of the Levels of Concern established by the U.S. Food and Drug Administration. Good recoveries were also achieved in aged spikes at 5 ppb level in oyster and shrimp. Method accuracy was further evaluated by analyzing NIST Standard Reference Material 1974b. Ten of 14 incurred PAHs corresponding to the parent compounds in the present study fell within the control limits established by the National Oceanic and Atmospheric Administration. Using the present method approximately 20 samples every 24 h can be analyzed with confirmation. PRACTICAL APPLICATION: The presented analytical method could be used for seafood safety assessments to examine petroleum contaminant levels in edible seafood after an oil spill. The method is fast and sensitive.     

Multiresidue determination of carcinogenic polycyclic aromatic hydrocarbons in honey by solid-phase extraction and high-performance liquid chromatography

An analytical procedure based on solid-phase extraction, using ethyl acetate as the elution solvent, and high-performance liquid chromatography with fluorescence and diode array detection was developed for the identification and quantification of polycyclic aromatic hydrocarbons (PAHs) in honey. The method has been optimized and validated in accordance with Commission Regulation 333/2007 and Commission Decision 2002/657/EC. This method allows the identification of the 15 PAHs that should be monitored in food matrices, as proposed in 2002 by the Scientific Committee on Food and later by the European Union in the Commission Recommendation 2005/108/EC, because of their genotoxic and carcinogenic properties. The results of the validation study were in agreement with quality criteria described in European legislation in terms of sensitivity, accuracy, and ruggedness, and the method was applied to the analysis of 42 honey samples (21 from Spain and 21 from other regions). The honey samples were not contaminated by PAHs at detectable levels and thus could be marketed without health risk.     

葵花籽油中多环芳烃及色泽的吸附脱除研究

利用混合吸附剂对葵花籽油中16种多环芳烃(PAH16)及色泽进行吸附脱除。通过单因素试验考察了活性白土、活性炭、混合吸附剂用量、吸附温度、吸附时间对葵花籽油中PAH16及色泽脱除效果的影响,并采用正交试验对吸附脱除条件进行了优化。结果显示,在混合吸附剂用量为活性白土3%+活性炭1%、吸附温度110℃、吸附时间35 min的最优条件下,葵花籽油中BaP(苯并[a]芘)、PAH4(欧盟限定的4种多环芳烃)、HPAHs(6种重质多环芳烃)、LPAHs(10种轻质多环芳烃)、PAH16的脱除率分别为99.88%、95.49%、97.63%、83.63%、85.71%,残留量分别为0.02、2.09、0.83、42.18、43.01μg/kg,BaP和PAH4残留量达到并明显优于出口欧盟的要求,同时油脂脱色率为79.43%,达到了一级油的色泽指标。     

Removal of polycyclic aromatic hydrocarbons from contaminated soil by aqueous DNA solution

An aqueous DNA solution was applied for the extraction of polycyclic aromatic hydrocarbons (PAHs) from a spiked soil. Solubilities of 0.56, 11.78, and 11.24 mg L(-1) for anthracene, phenanthrene, and pyrene, respectively, were achieved after 1 day equilibration in 1% DNA. Using a spiked soil that contained 72 mg kg(-1) anthracene, 102 mg kg(-1) phenanthrene, and 99 mg kg(-1) pyrene, extractions of close to 88, 78, and 94%, respectively, were attained with 5% DNA at a 1:50 soil/extractant ratio. Maximum PAH dissolution occurred after 4-6 h. Comparative tests showed the main advantage of DNA over methyl-beta- and gamma-cyclodextrins and Tween 80 for pyrene removal. An ionic strength of 0.1 M NaCl was found necessary for maximum PAH dissolution and extraction. The performance of hexane regenerated DNA also remained stable after three stages of recycling. These results show the huge potential of DNA as an aqueous washing agent for PAH-contaminated soil.     

Emission of polycyclic aromatic hydrocarbons in China by county

Quantitative relationships among social, economic, and climate parameters, and energy consumption for Chinese provinces, provide data for regression models' estimated rates of energy consumption and emission of polycyclic aromatic hydrocarbons (PAHs) by county. A nonlinear model was used for domestic coal combustion with total population and annual mean temperature as independent variables. Linear regression models were utilized for all other types of fuel consumption. Monte Carlo simulation demonstrated that emission factors, rather than the regression modeling, constitute the main source of uncertainty in prediction. Models were validated using available energy data of several northern and southern counties of China from the literature. The total PAHs produced by each county is approximately equivalent to the sum of the total emission from energy, coke, and aluminum production.     

食品中多环芳烃的提取、纯化、以及检测方法的研究进展

对食品中多环芳烃(PAHs)的提取、纯化机理和检测方法进行了概述,侧重介绍了样品提取、纯化和分离过程中影响PAHs回收率的各种因素。