共查询到20条相似文献,搜索用时 375 毫秒
1.
2.
涤纶FDY、POY并网混纤丝的一步法研制 总被引:3,自引:1,他引:3
本公司在FDY纺丝机上成功地研制生产了一步法涤纶FDY、POY并网混纤丝。本文介绍了若干工艺技术关键并讨论了影响产品质量的因素。 相似文献
3.
炭素制品的质量与其生产过程中的各工序相关。其中与生制品的生产关系尤为密切。在生制品的生产过程中,混捏是比较重要的环节,提高混捏质量,对提高产品质量降低成本有着显著的作用。在采用双轴搅拌混捏锅的生产条件下,混捏温度和混捏时间是影响混捏质量的二大因素。在... 相似文献
4.
利用正交试验对6-氨基青霉烷酸结晶工艺优化。将酶裂解液加入有机溶剂苯乙酸,混相调等电点结晶,控制反应条件进行结晶正交试验,考察了影响结晶收率和产品质量的因素参数,筛选最优的结晶条件。通过试验结果得出较为理想的工艺控制条件,保证了产品质量和收率。 相似文献
5.
混料加工厂商在利用同一配方加工新批次的混配料时,要解决的共通性问题是混料产品质量的再现性.看起来这似乎很好解决,只需按最后一次生产那样的工艺步骤进行操作即可.但实际上存在多方面潜在因素的影响,使得他们不能如愿以偿.究其原因,首先要弄清楚与上一次加工操作的间隔时间,也就是说,加工间隔周期的长或短,对昆料产品质量的影响大不一样. 相似文献
6.
7.
8.
混捏工序是炭素生产的主要工序,而混捏机的优劣直接影响到炭素生产制品的质量,国内混捏机普遍存在搅刀轴头易漏料的现象,由于细粉的泄漏,影响到物料的配比,严重影响产品质量,同时污染环境,也对操作者的身体健康带来了损害,因此经过详细分析并结合国内外经验,对搅刀轴头密封进行了改进. 相似文献
9.
对一步法TCS +POY涤纶混纤丝沸水收缩率的影响因素进行分析探讨 ,认为纺丝速度是影响一步法TCS +POY涤纶混纤丝沸水收缩率的重要因素 ,冷却工艺条件、纺丝温度等亦有影响 相似文献
10.
文章对丁苯透明抗冲树脂在生产过程中影响产品质量因素进行了深入的分析,根据生产中的实际经验总结出影响产品质量的因素,并摸索出一套稳定产品质量的方法,有效的保证了树脂的产品质量。 相似文献
11.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
12.
13.
14.
D. G. Gordeev L. F. Gudarenko M. V. Zhernokletov V. G. Kudel’kin M. A. Mochalov 《Combustion, Explosion, and Shock Waves》2008,44(2):177-189
A semi-empirical equation of state for metals is described. Its capabilities are demonstrated by the example of the equation
of state for aluminum. New experimental data are presented on the location of the isentrope of aluminum for unloading from
the state at p = 229.71 GPa on the shock adiabat to an aerogel (SiO2) of density 0.08 g/cm3.
__________
Translated from Fizika Goreniya i Vzryva, Vol. 44, No. 2, pp. 61–75, March–April, 2008. 相似文献
15.
In the present article, chitin from crab shell was systematically deacetylated using a NaOH treatment with control of the reaction time. The degree of deacetylation, monitored using solid-state NMR, revealed that the reaction was pseudo-first order. Based on this, swollen and NaOH-saturated particles are proposed as the reaction system. The weight loss of the partially saponified and neutralized samples after HCl hydrolysis increased linearly with the degree of deacetylation. The crystallinity of the samples was found to increase after acid hydrolysis. According to conductimetric titration, the surface charge density of the crystallites, after acid hydrolysis, was found to increase with base treatment time. The effect of surface charge on the formation of a chiral nematic phase, due to the rodlike nature of the crystallites, was explored. These results show that because the contribution of charged particles to the ionic strength was significant the double layer compression was affected, especially since the surface charge density was close to the Manning limit. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65:373–380, 1997 相似文献
16.
17.
18.
Jorge Marcelo Romero Soledad Bustillo Hugo Enrique Ramirez Maisuls Nelly Lidia Jorge Manuel Eduardo Gómez Vara Eduardo Alberto Castro Alicia H. Jubert 《International journal of molecular sciences》2007,8(7):688-694
A thermochemical rather simple experimental technique is applied to determine the enthalpy of formation of Diperoxide of ciclohexanone. The study is complemented with suitable theoretical calculations at the semiempirical and ab initio levels. A particular satisfactory agreement between both ways is found for the ab initio calculation at the 6–311G basis This set level. Some possible extensions of the present procedure are pointed out. 相似文献
19.
磁敏橡胶材料弹性模量的测试与研究 总被引:1,自引:0,他引:1
陈先忠;肖静;游世辉 《中国塑料》2010,24(4):96-99
研究了磁敏橡胶超声测试的基本方法和参数,测量了各向同性和颗粒成链磁敏橡胶材料的纵向模量。对含铁颗粒填料体积分数不同的磁敏橡胶样本进行了三点弯曲试验,计算出磁敏橡胶样本的弹性模量,并与相关理论预测模型进行了对比,结果表明,对于各向同性磁敏橡胶,随着含铁颗粒填料体积分数的增加,其弹性模量和剪切模量增大。颗粒成链磁敏橡胶的弹性模量很大程度上依赖于测量的方向,含铁颗粒填料体积分数超过15 %时,在平行和垂直于颗粒链方向所测得的弹性模量有显著的不同。这是因为含铁颗粒填料体积分数超过15 %时,磁敏橡胶的颗粒成链结构不具有立体对称性。 相似文献
20.
醋酸纤维素取代基分布与性质的关系 总被引:9,自引:0,他引:9
分析了以吡啶为溶剂的醋酸纤维素的13C-NMR核磁共振谱,得出了三种不同位置羟基的取代度。结合X—射线和DSC分析,初步说明具有相同取代度但未经水解和经过水解的醋酸纤维素(CA) 性质上的差异是由于三个羟基上的取代度分布不同及消晶程度差异所致。 相似文献