环隙气升式气固环流反应器内颗粒速度特性

针对中心气升式气固环流反应器在工业化中暴露出来的问题,提出了一种新型的环隙气升式气固环流反应器,并建立了一套大型的冷态实验装置（装置总高4．56m,环流反应器筒体外径300mm）来考察环隙气升式气固环流反应器内颗粒速度特性。操作条件为环隙区表观气速0.10-0.54m／s,导流筒区表观气速0.059-0.200m／s。分别测量了环流反应器环流段内颗粒的密度和速度,基于实验数据对催化剂颗粒的运动速度和环流推动力进行系统分析。结果表明,环隙区颗粒分布形式为“中心稀两边浓”;环隙气升式气固环流反应器内,颗粒环流速度随着环隙区表观气速的增大而增大,而环流速度梯度逐步减小。随着导流筒高径比H／D的增大,环隙气升式气固环流反应器的环流推动力增大而颗粒环流速度减小。     

环流反应器中固定化酵母乙醇连续发酵研究

制备了一种重化固定化酵母颗粒，可有效防止发酵过程中固定化颗粒上浮，用于气升式内环流反应器，可与器内流体形成良好循环。同时在气升式内环流反应器内对固定化酵母乙醇连续发酵过程进行了研究，得到发酵最优控制条件。通过与其它发酵器对比发现，内环流反应器用于固定化酵母乙醇发酵过程，可大大提高乙醇产率。     

气升式环流反应器数值模拟研究进展

气升式环流反应器是一种结构简单,传质、传热效率高的多相反应器,反应器性能受物性参数和结构参数的影响,由于两相和三相流的复杂性,使得其在工业化设计放大和应用过程中存在困难。论述了气升式环流反应器内相间作用力类别和计算模型,对应用于气升式环流反应器模拟计算的简化模型、两相流模型和k-ε湍流模型进行总结,在分析现阶段气液两相流理论的基础上,明确反应器内不同流动形态下相间作用力、气泡的分散机理、气泡对湍流的影响、流动模拟模型的选取标准,能有效提高气升式环流反应器模拟的准确性及模型的普适性,为反应器的设计放大及传质模拟计算提供更加可靠的理论依据。     

气升式三相内环流生物反应器内流体力学和传质性能的实验研究

本文通过实验研究了气升式三相内环流反应器在非牛顿流体中的流体动力学特性和传质性能.考察了表观气速、导流筒与反应器截面积之比、固体粒子加入量及CMC溶液浓度等操作条件对气升式三相内环流生物反应器中导流筒与环隙内液体循环速度、气含率、固含率及气-液体积传质系数等流动与传质特性参数的影响.     

螺旋气升式内环流反应器流动特性

以水和空气两相系统为研究对象,建立螺旋气升式内环流反应器冷模实验装置,采用压差法测定导流筒升流区气含率,用电导法分别实测了升流区液相速度和反应器混合时间,研究螺旋气升式内环流反应器的流动特性,并与传统气升式内环流反应器的流动特性进行对比研究。结果表明,加螺环后反应器气含率明显增加,平均增幅为20%,升流区液相表观速度减小,混合时间增加。     

气升式内环流反应器流场及传质特性数值模拟

采用双流体模型和气液二相流体动力学理论建立了气升式环流反应器流体流动的数学模型,在此模型的基础上利用溶质渗透理论和各向同性湍流理论建立了局部液相体积传质系数数学模型。采用计算流体软件F luent对气升式环流反应器内气液二相流动状况进行模拟,模拟结果较好地解释了气升式环流反应器内的流动行为及传质特性。模拟计算值与文献实验值的吻合说明了模型的可行性。     

气升式振荡环流反应器的数值模拟和结构优化

气升式振荡环流反应器（ARLR）作为一种新型的气升式环流反应器,能够有效地提高反应器的气含率和传质系数,并已得到生物发酵实验的验证。本文通过CFD的手段研究了反应器内的流动和传质状况,并利用CFD模拟和响应面分析相结合的方法,优化了反应器的结构参数,如高径比（H/D）、升液区降液区面积之比、导流筒高度等。经过实验测量,优化后的气升式振荡环流反应器与传统的气升式环流反应器相比,气含率提高了32%以上,传质系数提高了11%以上。结果表明,气升式振荡环流反应器作为生化反应器有着非常广阔的应用空间。     

气升-射流式多段环流反应器的流体力学和传质特性

气升式环流反应器在气液或气液固三相反应以及分离过程应用广泛,为提高气液分布和传质性能,在气升式多段环流反应器的第2段引入射流,开发一种气升-射流式多段环流反应器.在160 L的实验装置中,以水-空气体系,研究了气升-射流式多段环流反应器的流体力学和传质特性.射流可减小上升气泡的弦长,提高总体气含率,改善下降段气液分布,...     

气升式环流反应器的研究进展

就气升式环流反应器的类别、操作条件和几何结构对环流反应器内两相流体力学行为的影响规律进行了评述。根据环流反应器的流体力学特性和传质特性指出了环流反应器的应用领域及要求。列举了环流反应器在工业上的应用实例。     

气升式环流反应器特性参数的研究进展

介绍了气升式环流反应器的工作原理、分类及流型,综述了气升式环流反应器的流体力学特征参数(主要包含气含率和循环液速)、混合及传质特性参数的测量方法和影响因素。介绍了气含率和循环液速的数学模型,并评述了现有模型。展望了气升式环流反应器进一步的研究方向与发展前景。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。