一种新型陷波特性超宽带天线设计

为了满足现代通信的需求,设计了一种新型的超宽带平面天线,实现了良好的超宽频带阻抗匹配.该天线的辐射贴片与接地板结构相似,通过在辐射贴片上加载U型槽以及在馈线一侧加载新型陷波结构分别在中心频率3.5 GHz和5.5 GHz处产生陷波.天线实测与仿真结果基本相近,通带内辐射效果良好,且该天线对WIMAX及WLAN波段有很好的抑制功能,可用于超宽带系统.     

一种新型超宽带双陷波平面单极子贴片天线设计

设计一种新型双陷波超宽带单极子贴片天线,辐射贴片为酒杯型天线结构,采用对底部边缘开槽曲流的办法,实现了良好超宽带天线性能。同时对辐射贴片加载了U形和C形缝隙,分别在3.5 GHz和5.5 GHz处产生陷波。利用HFSS软件对所设计天线进行仿真验证,仿真结果与实测结果表明,该天线在超宽带范围内能有效抑制双陷波能力,并且在通带范围有良好辐射和稳定增益特性。其天线尺寸为33 mmX26 mmX0.74 mm,便于集成在电路系统中。     

一种新型超宽带双陷波平面单极子贴片天线设计

设计一种新型双陷波超宽带单极子贴片天线,辐射贴片为酒杯型天线结构,采用对底部边缘开槽曲流的办法,实现了良好超宽带天线性能。同时对辐射贴片加载了U形和C形缝隙,分别在3.5 GHz和5.5 GHz处产生陷波。利用HFSS软件对所设计天线进行仿真验证,仿真结果与实测结果表明,该天线在超宽带范围内能有效抑制双陷波能力,并且在通带范围有良好辐射和稳定增益特性。其天线尺寸为33 mm×26 mm×0.74 mm,便于集成在电路系统中。     

一种双陷波超宽带单极子天线的设计

提出了一种新型双陷波特性的超宽带单极子天线。通过在介质基板上添加锥形辐射贴片,天线可以覆盖超宽带通信频段。在辐射贴片上引入上、下两个锥形缝隙结构,可以实现3.5 GHz、5.5 GHz的双陷波特性。天线实测模型电压驻波比＜2的阻抗带宽是2.56~10.61 GHz,其中3.18~3.76 GHz和4.4~5.75 GHz具有陷波特性。测试表明,天线在工作频带内具有全向辐射特性。     

一种双陷波超宽带马蹄形天线的设计

提出了一种新型的带有3.4 GHz和5.5 GHz双陷波特性的超宽带天线。天线由马蹄形的辐射贴片和共面波导馈电的传输线组成。回波损耗＜-10 dB的阻抗带宽是3.1~10.6 GHz,除了其中3.3~3.7 GHz 的WiMAX和5.15~5.825 GHz 的WLAN两个陷波频段。这些陷波的频段可以通过在天线的辐射贴片上增加长条裂缝和U型缝隙来保证。加工和测试的结果表明,天线有着良好的阻抗带宽和全向辐射方向图。     

一种新型小尺寸三陷波超宽带天线设计

文中提出了一种新型小尺寸具有三陷波特性的UWB天线。所设计的天线基本几何结构由50 Ω馈电线、圆形辐射贴片、缺陷地和一对开口谐振环组成,通过在天线的圆形辐射贴片上内嵌一对Y型贴片、地板上蚀刻出U型贴片和一对开口谐振环实现三陷波特性,天线的尺寸为30 mm×30 mm×16 mm。仿真和测试结果表明,该天线29~107 GHz的频段内回波损耗＜-10 dB,在37~42 GHz、515~5825 GHz和79~84 GHz3个频段内具有陷波特性,分别有效抑制了C频段的卫星系统、WLAN系统和X频段卫星系统对超宽带系统的干扰。在除3个阻带频段外的其余UWB工作频段范围内,有着良好的辐射方向特性和稳定的增益。仿真结果和实验结果表现出了良好的一致性。     

一种具有三陷波特性的超宽带印刷天线设计

提出了一种新型的具有三陷波特性的超宽带印刷天线。大钱形的辐射贴片和共面波导传输线馈电,可以保证在相当宽的3个频带内具有良好的阻抗匹配。回波损耗S₁₁＜-10 dB的阻抗带宽是3.1~10.6 GHz,除了其中3.3~3.7 GHz 的WiMAX,5.15~5.825 GHz的WLAN和7.25~8.4 GHz的X波段下行频段3个陷波频段。这些陷波的频段可以通过在天线的辐射贴片上增加长条裂缝和U形缝隙实现。加工和测试结果表明,该天线具有很好的阻抗带宽和全向辐射方向图。     

一种小型化双陷波可重构UWB天线设计

提出了一种小型化的双陷波可重构超宽带(ultra wide band, UWB)天线,通过在辐射贴片上刻蚀大、小两个C形槽,实现5G (3.3~4.4 GHz)/WiMAX (3.3~3.6 GHz)和WLAN (5.150~5.825 GHz)两个频段的陷波. 采用两个PIN二极管跨接在C形槽上,通过控制PIN二极管的通断状态,在两个频段上实现陷波可重构. 为了实现小型化,天线采用削顶圆形结构的辐射贴片,并将C形槽设计为嵌套结构,天线最终尺寸为18.0 mm×19.5 mm. 仿真与测量结果表明:天线可以在UWB、两种单陷波和双陷波共四种状态下工作,UWB频段为3.1~11.0 GHz,两个单陷波频段分别为3.2~4.9 GHz、5.2~6.0 GHz,双陷波频段为3.25~4.75 GHz和5.3~6.1 GHz. 天线的最大增益为2.8 dBi,具有良好的辐射特性.     

一种紧凑型超宽带双陷波天线设计与研究

超宽带(UWB)系统的工作频段与现有的许多窄带系统频段相互重叠,因此各个系统信号之间存在潜在的干扰。针对上述问题提出了一种紧凑型超宽带双陷波天线。天线由一个圆形辐射贴片构成并通过50W的微带线进行馈电。接地板和传统的接地板相比被截短了,以提高天线的阻抗带宽。通过在辐射贴片上刻蚀H 型槽来实现天线的双陷波功能,并在微带馈线中引入了嵌入式谐振回路(ERC)结构,加大了天线的陷波深度和阻带宽度,陷波性能好于同频段的双陷波天线。仿真和测试结果表明,天线在3.1～4.2 GHz 以及5.0～6.6GHz 具有陷波特性,有效地避免了WiMAX 和WLAN 频段信号的干扰。同时在2.8 ~10.7 GHz 的其它频段上具有良好的阻抗匹配和较好辐射方向特性。天线的尺寸为34mm*26mm*1.6 mm,结构较为紧凑。     

基于液晶聚合物的双陷波可穿戴天线的设计

基于超薄液晶聚合物柔性材料,设计了一种满足无线体域网(WBAN)需求的双陷波UWB可穿戴天线。该天线由椭圆形贴片、锥形三叉戟共面馈线和梯形地板组成。通过分别在辐射贴片上蚀刻椭圆开口谐振环和在共面馈线上蚀刻n形槽以实现双陷波特性。该天线采用共面波导的馈电方式,具有良好的共面性,易于与载体共形。经网络矢量分析仪测试结果表明,该天线在3. 1~10. 6 GHz的超宽带频段内回波损耗小于-10 d B的同时,在4. 88~6. 15 GHz和7. 55~8. 51 GHz内拥有双陷波特性,可抑制WiMAX和ITU 8 GHz频段对系统产生的干扰。与以往的可穿戴天线相比,该天线厚度仅为0. 1 mm,且柔性可弯曲。此外,对天线在弯曲情况下进行测试,天线特性基本保持不变。     

Compact ultra-wideband antenna with tri-band notched characteristic

A compact ultra-wideband printed planar antenna with tri-band notched characteristic is presented. Two different types of slots are used to obtain tri-band notched characteristic. By using a U-slot defected ground structure, a notched band, 5?6 GHz for WLAN, is achieved. An H-shaped slot is etched on the radiating patch to obtain another two notched bands at 3.3?3.7 GHz for WiMAX and 7.2 GHz for some C-band satellite communication systems. The proposed antenna yields an impedance bandwidth of 3.1?10.6 GHz with VSWR , 2, except the notched bands. The antenna is successfully simulated and measured, showing tri-band notched characteristic can be obtained by using two different slots.     

新型小尺寸三陷波超宽带天线的设计

设计了一种紧凑的具有三陷波特性的超宽带天线。天线采用渐变微带线馈电,并通过矩形加半圆的辐射单元和半圆形地板来实现超宽带。通过在辐射单元上刻蚀对称的L形槽和圆环形槽,来实现在WLAN/WiMAX的陷波特性;在渐变微带馈线两侧增加对称的C形谐振器来达到在X频段的陷波特性。实验结果表明,天线在2.68~13GHz频段内电压驻波比小于2,同时在3.1~3.8GHz,5~5.9GHz,7.25~7.85GHz频段内有陷波抑制作用,且具有良好的辐射特性。天线具有较小的几何尺寸,仅为20mm×30mm。     

Performances of OSIC Detector of an UpLink OFDM Massive-MIMO System in Rayleigh and Ricain Fading Channels

A compact rectangular microstrip-fed Ultra Wideband patch antenna with double band notched feature at Wi-Max and WLAN is offered in this paper. The designed antenna is composed of an ordinary rectangular patch antenna with a partially defective ground structure. For achieving dual notch characteristics a ‘U’ and ‘Reversed U’ slots are embedded in the radiating patch. The partial ground plane structure with U shaped slot in the middle is incorporated for achieving additional resonance and bandwidth enhancement. The proposed antenna has a measurement of 20 × 33 × 1.6 mm³. First notch created by U shaped slot at frequency 3.5 GHz is for Wi-Max (from 2.9 to 4.5 GHz) and Second notch which is generated by Reversed U shaped slots at frequency 5.4 GHz is for WLAN (from 5.49 to 6.45 GHz). The antenna covers almost complete range of Ultra Wideband (3.1–10.6 GHz). The Simulation analysis of the proposed antenna is carried out using CST-2011 simulation software. The radiation pattern of the simulated antenna is near Omnidirectional and the Gain of proposed antenna is almost stable over the range of UWB excluding notch bands.

     

Compact Quad Band-Notched Monopole Antenna for UWB Systems

A novel compact microstrip-fed UWB antenna with quad notched band is proposed. The antenna consists of a rectangular radiating patch with a half circle, a tapered microstrip feed-line, and a semi-elliptical ground plane. With a pair of L-shaped slots, complementary co-directional SRR and a pair of C-shaped stubs, four notched bands are created to prevent interference from WiMAX/lower WLAN/higher WLAN/X-band. Experimental results show that the designed antenna, with compact size of 20 × 30 mm², has an ultrawide band (VSWR < 2) from 2.68 to 13 GHz, except four notched bands of 3.13–3.8, 4.87–5.52, 5.65–6.1, 7.12–8 GHz. Good radiation patterns and stable gain within the operating band have been observed.     

Dual Band-Notched Small Monopole Antenna with Enhanced Bandwidth for UWB Applications

This article proposes a novel printed monopole antenna for ultra wideband applications with dual band-notch function. The antenna consists of a disc-shaped radiating patch with a pair of folded strips arms, and a ground plane with a two L-shaped conductor backed plane, which provides a wide usable fractional bandwidth of more than 140 % (2.6–14.43 GHz). In order to generate single band-notch characteristics, we use a modified disc-shaped radiating patch with a pair of folded strips arms also by using this modified radiating patch, additional resonance is excited and hence much wider impedance bandwidth can be produced, especially at the higher band. By adding two L-shaped conductor backed plane in the ground plane a dual band notch function is achieved. The measured results reveal that the presented dual band-notch monopole antenna offers a very wide bandwidth with two notched bands, covering all the 5.2/5.8 GHz WLAN, 3.5/5.5 GHz WiMAX and 4 GHz C bands. The designed antenna has a small size of $12\times 18\,\hbox {mm}^{2}$ .     

60-GHz CPW-fed post-supported patch antenna using micromachining technology

A 60-GHz coplanar waveguide (CPW)-fed post-supported patch antenna is presented using micromachining technology. In the proposed structure, the radiating patch and the feed line network can be optimized separately with a substrate. The antenna performance is improved by elevating the patch in the air. A patch array antenna is also designed with a simple feed network. The fabricated antenna shows broad band characteristics such as -10 dB bandwidth of 4.3GHz from 58.7GHz to 64.5GHz in the single patch antenna and 8.7GHz from 56.3GHz to 65GHz in 2/spl times/1 patch array antenna.