Electron Tomography Reveals the Droplet Covered Surface Structure of Nanowires Grown by Aerotaxy

For the purpose of functionalizing III‐V semiconductor nanowires using n‐doping, Sn‐doped GaAs zincblende nanowires are produced, using the growth method of Aerotaxy. The growth conditions used are such that Ga droplets, formed on the nanowire surface, increase in number and concentrations when the Sn‐precursor concentration is increased. Droplet‐covered wires grown with varying Sn concentrations are analyzed by transmission electron microscopy and electron tomography, which together establish the positioning of the droplets to be preferentially on {?111}B facets. These facets have the same polarity as the main wire growth direction, [?1?1?1]B. This means that the generated Ga particles can form nucleation sites for possible nanowire branch growth. The concept of azimuthal mapping is introduced as a useful tool for nanowire surface visualization and evaluation. It is demonstrated here that electron tomography is useful in revealing both the surface and internal morphologies of the nanowires, opening up for applications in the analysis of more structurally complicated systems like radially asymmetrical nanowires. The analysis also gives a further understanding of the limits of the dopants which can be used for Aerotaxy nanowires.     

Synthesis and characterization of germanium oxide nanowires

Germanium oxide (GeO2) nanowires have been prepared by heating a mixture of Ge powder and carbon in an Ar + O2 mixture at 900 degrees C. The nanowires have been characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and spectroscopic measurements. The nanowires are single crystalline with diameters in the 15-250-nm range. They exhibit characteristic blue luminescence.     

One-dimensional germanium nanostructures--formation and their electron field emission properties

Ge nanostructures were synthesized by reduction of GeO(2) in H(2) atmosphere at various temperatures. Entangled and straight Ge nanowires with oxide shells were grown at high temperatures. Ge nanowires with various numbers of nodules were obtained at low temperatures. Ge nanowires without nodules exhibited remarkable field emission properties with a turn-on field of 4.6 V μm(-1) and field enhancement factor of 1242.     

Photoluminescence and gas sensing study of nanostructured pure and Sn doped ZnO

The nanostructured pure and Sn doped ZnO have been synthesized by the thermal evaporation technique. The influence of Sn on the morphology and structure is investigated by using scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive X-ray (EDX) analysis techniques. The SEM images indicate change in the growth pattern from nanowires of pure ZnO to tetrapods for Sn doped ZnO. Pure ZnO nanowires exhibit selective response towards acetone vapors while on Sn doping the response decreases. The non-stiochiometry and the morphology of ZnO are probably responsible for such a difference in gas response. However increase in temperature doesn't improve the sensing behavior. The photoluminiscence (PL) studies reveal UV emission in pure ZnO which shifts to green emission on doping of Sn.     

Sn-catalyzed growth of MgO nanowires

We reported the fabrication and characterization of MgO nanowires, which were grown by thermal evaporation of the mixture of MgB2 and Sn powders at 800 degrees C through a vapor-liquid-solid (VLS) process. We characterized as-synthesized MgO nanowires using X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Sn nanoparticles were located at the tips of the nanowires, serving as catalyst for the growth of MgO nanowires. The produced nanowires were of cubic MgO structures with diameters in the range of 10-170 nm. The PL measurement with a Gaussian fitting exhibited visible light emission bands centered at 403, 576, and 720 nm.     

A novel tip-induced local electrical decomposition method for thin GeO films nanostructuring

Decomposition of germanium monoxide (GeO) films under the impact of an atomic force microscope (AFM) tip was observed for the first time. It is known that GeO is metastable in the solid phase and decomposes into Ge and GeO(2) under thermal annealing or radiation impact. AFM tip treatments allow us to carry out local decomposition. A novel tip-induced local electrical decomposition (TILED) method of metastable GeO films has been developed. Using?TILED of 10?nm thin GeO film, Ge nanowires on silicon substrates were obtained.     

Cathodoluminescence of rare earth implanted Ga2O3 and GeO2 nanostructures

Rare earth (RE) doped gallium oxide and germanium oxide micro- and nanostructures, mostly nanowires, have been obtained and their morphological and optical properties have been characterized. Undoped oxide micro- and nanostructures were grown by a thermal evaporation method and were subsequently doped with gadolinium or europium ions by ion implantation. No significant changes in the morphologies of the nanostructures were observed after ion implantation and thermal annealing. The luminescence emission properties have been studied with cathodoluminescence (CL) in a scanning electron microscope (SEM). Both β-Ga(2)O(3) and GeO(2) structures implanted with Eu show the characteristic red luminescence peak centered at around 610 nm, due to the (5)D(0)-(7)F(2) Eu(3+) intraionic transition. Sharpening of the luminescence peaks after thermal annealing is observed in Eu implanted β-Ga(2)O(3), which is assigned to the lattice recovery. Gd(3+) as-implanted samples do not show rare earth related luminescence. After annealing, optical activation of Gd(3+) is obtained in both matrices and a sharp ultraviolet peak centered at around 315 nm, associated with the Gd(3+) (6)P(7/2)-(8)S(7/2) intraionic transition, is observed. The influence of the Gd ion implantation and the annealing temperature on the gallium oxide broad intrinsic defect band has been analyzed.     

Remote p-doping of InAs nanowires

We report on remote p-type doping of InAs nanowires by a p-doped InP shell grown epitaxially on the core nanowire. This approach addresses the challenge of obtaining quantitative control of doping levels in nanowires grown by the vapor-liquid-solid (VLS) mechanism. Remote doping of III-V nanowires is demonstrated here with the InAs/InP system. It is especially challenging to make p-type InAs wires because of Fermi level pinning around 0.1 eV above the conduction band. We demonstrate that shielding with a p-doped InP shell compensates for the built-in potential and donates free holes to the InAs core. Moreover, the off-current in field-effect devices can be reduced up to 6 orders of magnitude. The effect of shielding critically depends on the thickness of the InP capping layer and the dopant concentration in the shell.     

Contactless measurement of surface dominated recombination in gold- and aluminum-catalyzed silicon vapor-liquid-solid wires

Carrier lifetimes of Si micro/nanowires grown by the vapor-liquid-solid method are measured using an extension of the classic contactless photoconductivity decay method. The samples measured consist of a thin aggregated film of oxide passivated wires on a fused silica carrier. Au catalyzed wires in the 392-730 nm diameter range are studied. Recombination in these wires is controlled by the surface or near surface effects, not bulk Au impurities. The lifetimes of Au- and Al-catalyzed wires of comparable diameter are measured. The Al wires are found to have slightly longer lifetimes than those grown with Au at a comparable diameter. Across all samples, the lifetimes measured range was from 0.2 to 1.0 ns. The surface controlled nature of the recombination measured implies larger diameter wires will offer better performance in devices that rely on minority carrier transport.     

Synthesis and characterization of phase-change nanowires

Phase-change memory materials have stimulated a great deal of interest although the size-dependent behaviors have not been well studied due to the lack of method for producing their nanoscale structures. We report the synthesis and characterization of GeTe and Sb(2)Te(3) phase-change nanowires via a vapor-liquid-solid growth mechanism. The as-grown GeTe nanowires have three different types of morphologies: single-crystalline straight and helical rhombohedral GeTe nanowires and amorphous curly GeO(2) nanowires. All the Sb(2)Te(3) nanowires are single-crystalline.     

Directed synthesis of germanium oxide nanowires by vapor-liquid-solid oxidation

We report on the directed synthesis of germanium oxide (GeO(x)) nanowires (NWs) by locally catalyzed thermal oxidation of aligned arrays of gold catalyst-tipped germanium NWs. During oxygen anneals conducted above the Au-Ge binary eutectic temperature (T?>?361?°C), one-dimensional oxidation of as-grown Ge NWs occurs by diffusion of Ge through the Au-Ge catalyst droplet, in the presence of an oxygen containing ambient. Elongated GeO(x) wires grow from the liquid catalyst tip, consuming the adjoining Ge NWs as they grow. The oxide NWs' diameter is dictated by the catalyst diameter and their alignment generally parallels that of the growth direction of the initial Ge NWs. Growth rate comparisons reveal a substantial oxidation rate enhancement in the presence of the Au catalyst. Statistical analysis of GeO(x) nanowire growth by ex?situ transmission electron microscopy and scanning electron microscopy suggests a transition from an initial, diameter-dependent kinetic regime, to diameter-independent wire growth. This behavior suggests the existence of an incubation time for GeO(x) NW nucleation at the start of vapor-liquid-solid oxidation.     

Selective growth of silica nanowires using an Au catalyst for optical recognition of interleukin-10

The vapor-liquid-solid (VLS) growth procedure has been extended for the selective growth of silica nanowires on SiO(2) layer by using Au as a catalyst. The nanowires were grown in an open tube furnace at 1100?°C for 60?min using Ar as a carrier gas. The average diameter of these bottom-up nucleated wires was found to be 200?nm. Transmission electron microscopy analysis indicates the amorphous nature of these nanoscale wires and suggests an Si-silica heterostructure. The localized silica nanowires have been used as an immunoassay template in the detection of interleukin-10 which is a lung cancer biomarker. Such a nanostructured platform offered a tenfold enhancement in the optical response, aiding the recognition of IL-10 in comparison to a bare silica substrate. The role of nanowires in the immunoassay was verified through the quenching behavior in the photoluminescence (PL) spectra. Two orders of reduction in PL intensity have been observed after completion of the immunoassay with significant quenching after executing every step of the protocol. The potential of this site-specific growth of silica nanowires on SiO(2) as a multi-modal biosensing platform has been discussed.     

Selective growth of Ge nanowires by low-temperature thermal evaporation

High-quality single-crystalline Ge nanowires with electrical properties comparable to those of bulk Ge have been synthesized by vapor-liquid-solid growth using Au growth seeds on SiO(2)/Si(100) substrates and evaporation from solid Ge powder in a low-temperature process at crucible temperatures down to 700?°C. High nanowire growth rates at these low source temperatures have been identified as being due to sublimation of GeO from substantial amounts of GeO(2) on the powder. The Ge nanowire synthesis from GeO is highly selective at our substrate temperatures (420-500?°C), i.e., occurs only on Au vapor-liquid-solid growth seeds. For growth of nanowires of 10-20?μm length on Au particles, an upper bound of 0.5?nm Ge deposition was determined in areas of bare SiO(2)/Si substrate without Au nanoparticles.     

Growth of GaAs Nanowires on Si Substrates Using a Molecular Beam Epitaxy

Au-catalyzed GaAs nanowires were grown on Si substrates by vapor-liquid-solid growth method using a molecular beam epitaxy (MBE). The MBE growth could produce controlled crystalline orientation and uniform diameter along the wire axis of the GaAs nanowires by adjusting growth conditions including growth temperature and V/III flux ratio. Growths of GaAslang001rang as well as GaAslang111rang nanowires were observed by transmission electron microscopy and scanning electron microscopy. Epitaxially grown GaAslang111rang nanowires on a Si(111) substrate were verified through x-ray diffraction out-of-plane 2thetas/omega-scans. A strong room-temperature photoluminescence (PL) was observed from the epitaxially grown GaAslang111rang nanowires on a Si(100) substrate. Results of low-temperature (10 K) PL measurements and current-sensing atomic force microscopy indicated that the GaAs nanowires on a Si substrate were unintentionally doped with Si     

Temperature dependent growth and optical properties of SnO<Subscript>2</Subscript> nanowires and nanobelts

SnO₂ nanowires and nanobelts have been grown by the thermal evaporation of Sn powders. The growth of nanowires and nanobelts has been investigated at different temperatures (750–1000°C). The field emission scanning electron microscopic and transmission electron microscopic studies revealed the growth of nanowires and nano-belts at different growth temperatures. The growth mechanisms of the formation of the nanostructures have also been discussed. X-ray diffraction patterns showed that the nanowires and nanobelts are highly crystalline with tetragonal rutile phase. UV-visible absorption spectrum showed the bulk bandgap value (∼ 3–6 eV) of SnO₂. Photoluminescence spectra demonstrated a Stokes-shifted emission in the wavelength range 558–588 nm. The Raman and Fourier transform infrared spectra revealed the formation of stoichiometric SnO₂ at different growth temperatures.     

Redox reaction-assisted growth of ZnO nanowires on SnO2 thin films

ZnO nanowires were grown onto SnO₂ film coated on Si substrate using a vapor transport method. Zn vapor was found to play important roles in reducing SnO₂ and in being oxidized as a ZnO layer. The growth mechanism of ZnO nanowires was revealed to be a two-step process of Zn-SnO₂ redox reaction and Sn catalyzed V-L-S (vapor-liquid-solid) growth; initially, Zn vapor atoms arriving at the SnO₂ surface reduce the SnO₂ to Sn and O atoms and diffuse into the SnO₂ layer to form a ZnO layer. The reduced Sn atoms diffuse out of the SnO₂ layer and are agglomerated to form Sn liquid droplets. Then, the Sn droplets on the surface of ZnO layer serve as a catalyst for the catalytic V-L-S growth of ZnO nanowires.     

In2O3 nanowires for gas sensors: morphology and sensing characterisation

Thin and densely packed In₂O₃ nanowires have been synthesised on alumina substrates via transport and condensation method, starting from nanoparticles of indium or palladium as catalysts for the condensation process. Indium catalyst promoted wires growth according to vapour-solid (VS) mechanism, while palladium catalyst leads to wires formation based on vapour-liquid-solid (VLS) condensation. Electron microscopy and related diffraction analysis demonstrated that the wires are monocrystalline, with atomically sharp termination of the lateral sides, and are free from extended defects. The sensing properties of nanowires bundles have been tested to acetone using the flow through technique in the temperature range between 100 and 500 °C.     

ZnO纳米线CO气敏性能与气体浓度的关系研究

以采用物理热蒸发法制备的纯ZnO纳米线和掺杂Ni、Al的ZnO纳米线为气敏基料,以蒸馏水调和制备成旁热式气敏元件,用静态配气法对一系列浓度的一氧化碳气体进行了气敏性能的测试。结果表明掺杂的纳米ZnO元件与纯的纳米ZnO元件相比对CO气体的灵敏度更高,三种元件的灵敏度与所测气体浓度均呈现先上升后下降的变化趋势,且在同一浓度下出现最高值。     

Probing the wurtzite conduction band structure using state filling in highly doped InP nanowires

We have grown InP nanowires doped with hydrogen sulfide, which exhibit sulfur concentrations of up to 1.4%. The highest doped nanowires show a pure wurtzite crystal structure, in contrast to bulk InP which has the zinc blende structure. The nanowires display photoluminescence which is strongly blue shifted compared with the band gap, well into the visible range. We find evidence of a second conduction band minimum at the gamma point about 0.23 eV above the band edge, in excellent agreement with recent theoretical predictions. Electrical measurements show high conductivity and breakdown currents of 10(7) A/cm(2).     

Sn催化的Ga掺杂ZnO纳米线的制备及其光致发光性能研究

采用化学气相沉积的方法,以Sn粉为催化剂制备出大长径比的Ga掺杂ZnO纳米线。采用扫描电子显微镜观察制备的产物,发现样品为直径约25～90nm的纳米线。通过比较不同Ga掺杂含量样品的室温光致发光谱,发现一定掺杂含量的Ga可以提高ZnO纳米线的紫外发光强度,同时,Ga的掺杂也会引起ZnO紫外发光峰的蓝移。随着Ga含量的增加,蓝移程度越来越小,甚至发生红移。Sn的引入只对Ga掺杂ZnO纳米线的蓝绿光有贡献。