共查询到19条相似文献,搜索用时 125 毫秒
1.
2.
剖析了PVC浆料粘度对汽提效果、产品质量以及回收过程中VCM /H2 O气束对PVC粒子夹带的影响 ,表明PVC树脂的表观密度低于 0 .4g/mL、粒径小于 5 0 μm时容易出现夹带现象 ,只有在浆料中加入一定量的消泡剂 ,才能降低VCM /H2 O气束对PVC粒子的夹带。指出在生产不同牌号的PVC树脂时 ,需加消泡剂的量也不同 相似文献
3.
通过PVC树脂中VCM脱吸机理和影响因素的分析 ,提出了改进措施 :(1)减少分散剂用量、加入低分子质量、低醇解度的聚乙烯醇 (LL - 0 2 ) ;(2 )在聚合配方中添加NH3·H2 O和NH4 HCO3;(3)当聚合釜压力降为 0 .15~ 0 .2 0MPa时加终止剂 (此时转化率在 85 %以下 )终止反应。采取改进措施后 ,改进了PVC树脂颗粒的皮膜结构 ,使PVC树脂中残留的VCM含量小于 5× 10 -6,达到了无毒级PVC树脂的要求。 相似文献
4.
《聚氯乙烯》2003,(6):59-60
“2 0 0 3年全国PVC塑料加工工业技术年会”胜利召开由中国塑料加工工业协会和全国聚氯乙烯信息站联合主办的“2 0 0 3年全国PVC塑料加工工业技术年会”于 2 0 0 3年 9月 2 2~ 2 6日在广西桂林召开 ,共有来自全国PVC树脂生产、塑料加工及相关行业的 70家单位、10 0名代表参加了此次会议 ,会议的核心议题为 :“加强PVC塑料加工企业与PVC树脂生产企业的技术交流 ,共同促进PVC行业的发展”。来自浙江大学、四川大学、北京化工大学、福建师范大学、杭州华纳化工有限公司等高等院校及科研院所的专家作了聚氯乙烯的耐热及增强增韧改性、… 相似文献
5.
6.
7.
介绍了超低聚合度PVC树脂、高表观密度PVC树脂、消光PVC树脂、超高聚合度PVC树脂及高抗冲PVC树脂等几种专用PVC树脂的国内外生产、工艺、产品型号及应用情况。 相似文献
8.
9.
10.
悬浮法PVC专用树脂技术进展 总被引:2,自引:2,他引:2
PVC树脂的改性有物理方法和化学方法两种途径,文中从产品性能、生产工艺、牌号及用途几方面介绍了几种改性悬浮法PVC专用树脂,如低聚合PVC、高聚合度PVC、交联PVC、氯化聚氯乙烯、粉末涂层用PVC专用树脂、球形树脂、直接挤出成型加工硬质PVC专用树脂、耐热PVC树脂、氯乙烯-醋酸乙烯系一旬共聚树脂、内增塑PVC树脂、氯乙烯-乙烯/醋酸乙烯接枝共聚物、氯乙烯-丙烯酸酯共聚树脂、PVC合金专用料等。指出了我国发展PVC专和树脂的重要性。 相似文献
11.
用两种不同结构的黏土伊利石和海泡石作为填料填充到聚氯乙烯(PVC)树脂中,研究黏土结构对PVC性能的影响。结果表明:黏土的结构不同,对PVC的性能影响也存在明显差异。伊利石对提高PVC的拉伸强度优于海泡石;而海泡石对提高PVC的冲击强度优于伊利石。伊利石提高了PVC的弯曲强度,对弯曲模量的影响不大;而海泡石降低了PVC的弯曲强度,但明显加大了PVC的弯曲模量。海泡石对提高PVC的热变形温度优于伊利石。 相似文献
12.
从门窗用PVC型材对PVC树脂的性能要求入手,简要分析了PVC树脂各项性能对PVC型材产品性能的影响,并就入厂检测情况提出了PVC型材厂家对PVC树脂的具体要求。 相似文献
13.
丁腈橡胶/聚氯乙烯共混胶 总被引:5,自引:1,他引:4
探讨了丁腈橡胶(NBR)中的结合丙烯腈质量分数、NBR/聚氯乙烯(PVC)(质量比,下同)、增塑剂邻苯二甲酸二辛酯(DOP)用量、PVC聚合度对NBR/PVC共混胶性能的影响,研究了NBR/低聚合度PVC共混胶的力学性能及加工流动性能。结果表明,随着NBR中结合丙烯腈质量分数的增加,NBR/PVC共混胶的耐油性能明显增强,力学性能也相应有所改善;NBR/PVC为80/20~60/40时.NBR/PVC共混胶的综合性能较好;DOP用量对NBR/PVC共混胶性能的影响不大;聚合度为700的PVC更适合于生产NBR/PVC共混胶,其力学性能、加工流动性能、耐老化性能与德国Bayer公司生产的牌号为Perbunan NT/VC3470B的NBR/PVC共混胶相当。 相似文献
14.
Poly(vinyl chloride) (PVC), PVC/chlorinated polyethylene (CPE), PVC/oxidized polyethylene (OPE), and PVC/CPE/OPE compounds were prepared in a Haake torque rheometer at various temperatures, rotor speeds, and totalized torques (TTQ). The fusion characteristics of these PVC compounds (fusion time, fusion torque, and fusion temperature) were studied. Longer fusion time results in higher fusion temperature. Higher fusion temperature results in lower fusion torque. The fusion time of PVC/OPE compounds is the longest among these PVC blends. However, the fusion time of PVC/CPE/OPE compounds is the shortest among these PVC blends. The fusion time of the PVC/CPE/OPE compound is significantly different from those of PVC, PVC/OPE, and PVC/CPE compounds at the medium starting temperature and the medium rotor speed. Scanning electron microscopy (SEM) analyses successfully revealed the surface morphological changes of the fusion of PVC, PVC/OPE, PVC/CPE, and PVC/CPE/OPE compounds. The lubrication mechanisms of these PVC compounds have also been postulated. © 1995 John Wiley & Sons, Inc. 相似文献
15.
特种聚氯乙烯树脂生产概况 总被引:1,自引:0,他引:1
简述了国内外主要特种聚氯乙烯树脂(包括高聚合度PVC树脂、消光PVC树脂、PVC掺混树脂、氯乙烯一醋酸乙烯共聚树脂和氯化PVC树脂)的生产情况。并列举了主要特种PVC树脂的生产厂商、牌号和技术规格。 相似文献
16.
通过玻璃涂层法分别制备了纯聚氯乙烯(PVC)薄膜和添加钙钛矿型铌酸银(AgNbO3)光催化剂的复合膜(PVC/AgNbO3)。在紫外光照射条件下分别对PVC和PVC/AgNbO3薄膜进行了光催化降解实验。利用扫描电子显微镜、X射线衍射仪和傅里叶红外光谱对光照前后薄膜的形貌及光催化降解过程进行了分析表征。结果表明,6 W紫外光辐射480 h后,纯PVC薄膜失重为3.92 %;PVC/3 % AgNbO3、PVC/6 % AgNbO3、PVC/9 % AgNbO3、PVC/15 % AgNbO3复合薄膜分别失重19.16 %、22.94 %、26.59 %、31.75 %,AgNbO3光催化剂加速了PVC薄膜降解。 相似文献
17.
Acrylonitrial butadiene rubber (NBR)/Polyvinyl chloride (PVC) composites with different PVC content were prepared. The effect of PVC content on the mechanical strength and tribological properties of the NBR/PVC composites was investigated. The morphologies of the worn traces and debris of NBR/PVC composites and worn traces of mating ball were observed using a scanning electron microscope (SEM). It was found that the friction and wear of NBR/PVC was lower than that of NBR without PVC. The NBR/PVC composite with 30% PVC content showed the best synthetic mechanical and tribological properties. The inferior elastic properties and the lesser deformation under the applied load of composites with PVC resulted in hysteric force and adhesion force decrease, which leading to a lower friction and wear of NBR/PVC composites. The frictional failure unit of NBR70/PVC30 composite being smaller should be an important reason of the wear of the composite being lowest. The lubricating effect of PVC played an important role in decreasing the friction coefficient and wear of NBR/PVC composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007 相似文献
18.
19.
针对传统PVC管材存在加工性能不佳、冲击性能差等问题,结合PVC管技术的现状,提出一种抗冲击性的PVC管材材料。对此,文章首先对PVC管材增韧改性的基本原理进行分析,比较几种常用的增韧改性剂,最终选择ACR、MBS作为增韧改性剂;其次,以PVC树脂、SG型树脂等作为原材料,以MBS、ACR作为改性剂,对PVC管材进行制备,分别比较不同改性剂下的PVC管材性能;然后设计MBS+ACR的复配体系,得到不同复配体系下的PVC性能。由此通过上述的研究得出,在不考虑其他因素变化的情况下,MBS、ACR可提升PVC管材的抗冲击性能力,并赋予了PVC管材更好的断裂伸长率,从而大大提高了PVC的性能,并简化了加工难度。 相似文献