Synthesis of cerium-doped MCM-48 molecular sieves and its catalytic performance for selective oxidation of cyclohexane

Cerium-doped MCM-48 molecular sieves were synthesized hydrothermally and characterized by X-ray diffraction, nitrogen adsorption, transmission electron microscope, FT-IR spectroscopy, UV-visible spectroscopy, and Raman spectroscopy. The results showed that all the samples held the structure of MCM-48, and Ce could enter the framework of MCM-48. However, when Ce/Si molar ratio in the sampies was high （0.04 or 0.059）, there were CeO2 crystallites as secondary phase in the extraframework of MCM-48. Ce-doped MCM-48 was a very efficient catalyst for the oxidation of cyclohexane in a solvent-free system with oxygen as an oxidant. In the conditions of 0.5 MPa 02 and 413 K for 5 h, the conversion of cyclohexane was 8.1% over Ce-MCM-48-0.02, the total selectivity of cyclohexanol and cyclohaxnone was 98.7%. With an increase of Ce content, the conversion of cyclohexane and the selectivity to cyclohexanol decreased somewhat, but the selectivity to cyclohexanone increased.     

Synthesis and Characterization of Mesoporous Materials MCM-41 Incorporated by Yttrium, Neodymium and Samarium

Zeolitemolecularsieves,withtheuniformchan nelstructureandshapeselectiveproperty,arewidely usedascatalystsinindustriesofoil refining,petro chemicals,fine chemicalsandsoon.However,the poresizesofzeolitemolecularsievesusuallyaresmall erthan2nm,itgreatlypreve…     

Synthesis of lathanum or La-B doped KIT-6 mesoporous materials and their application in the catalytic oxidation of styrene

La-doped and La-B-doped KIT-6 mesoporous materials were prepared by direct hydrothermal synthesis with pH-adjusting method and characterized by X-ray diffractometer(XRD),nitrogen sorption,FT-IR,UV-Vis,X-ray photoelectron spectroscopy(XPS) and ICP-AES.The catalytic performance for the oxidation of styrene by hydrogen peroxide,tert-butyl hydroperoxide or oxygen was investigated.The results showed that the introduction of heteroatoms did not destroy the mesostructure of KIT-6 with cubic Ia3d space group.La or ...     

Preparation of ultrafine Ce-based oxide nanoparticles and their catalytic performances for diesel soot combustion

The ultrafine Ce-based oxide nanoparticles with different element dopings （Zr, Y） were synthesized by the method of mi- cropores-diffused coprecipitation （MDC） using ammonia solution as the precipitation agent. The activities of the catalysts for soot oxidation were evaluated by the temperature-programmed oxidation （TPO） reaction. Ce-based oxides prepared in this study exhibited high catalytic activity for soot oxidation under tile condition of loose contact between soot particles and catalysts, and the catalytic ac- tivity ofultrafine Ce0.gZr0 iO2 nanoparticle for soot combustion was the highest, whose/＂10, Ts0 and Sco2m was 364, 442 ~C and 98.3%, respectively. All catalysts were systematically characterized by means of X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, Brumauer-Emett-Teller （BET）, Fourier transform infrared spectroscopy （FT-IR） and UV-Vis diffuse reflectance spectroscopy （UV-Vis DRS）. It was indicated that the MDC method could prepare the ultrafine Ce-bascd oxide nanoparticles whose the crystal lattice were perfect, and the BET surface area and average crystal size of the ultrafine nanoparticles changed with the different element dopings （Zr, Y）. The H2-TPR measurements showed that the ultrafine Ce-based ox- ide nanoparticles with the doping-Zr cation could be favorable for improving the redox property of the catalysts.     

铁尾矿为原料微波法制备介孔分子筛

以鞍山铁尾矿为硅源,CTAB为模板剂,采用微波辐照法合成出全硅介孔分子筛MCM-41。用N2低温吸附、FT-IR、XRD和TEM等表征手段考察了其比表面积、孔径分布、晶体形貌等特性。结果表明:微波辐射法合成的MCM-41分子筛诱导期极短,晶化速度很快,具有典型的按六方对称性排列的孔道结构,FT-IR证明了分子筛具有硅氧四面体骨架。     

CeO2-supported vanadium oxide catalysts for soot oxidation: the roles of molecular structure and nanometer effect

The nanometer CeO2 powder was prepared by the method of microwave-assisted heating hydrolysis,and the nanometer CeO2-supported or ordinary CeO2-supported vanadia catalysts with different vanadium loadings(atomic ratios:100V/Ce=0.1,1,4,10,and 20) were prepared by an incipient-wetness impregnation method.Spectroscopic techniques(XRD,FT-IR,Raman and UV-Vis DRS) were utilized to characterize the structures of VOx/CeO2 catalysts.The results showed that the structures of CeO2-supported vanadium oxide catalysts de...     

Characterization and CO Catalytic Oxidation of CuO／Ce-Zr-La-O Catalyst

The Ce-Zr-La-O solid solution was prepared by the sol - gel method. The structure and the redox behavior of Ce-Zr-La-O solid solution and CuO/Ce-Zr-La-O catalysts were investigated by using XRD, Raman and TPR techniques. The result shows that the reduction capability of Ce0.7Zr0.3-y LayO solid solution is related to content of La. Appropriate content of La can enhance the redox capability of the solid solution. The oxidation activity of the CuO (6%)/Ce0.7Zr0.15La0. 15O catalyst is the highest. CuO, which finely dispersed and interacted with the support, is the site of oxidation activity.     

Preparation of Y-H3PW12O40/TiO2 and La-H3PW12O40/TiO2 by hydrothermal method and its photocatalytic activity for dinitrotoluene decomposition

A series of mesoporous materials （H3PW12O40/TiO2, Y-H3PW12O40/TiO2 and La-H3PW12O40/TiO2） were prepared by a modified sol-gel-hydrothermal route, which realized the load and modification of H3PW12O40 at the same time. The prepared samples were characterized by X-ray diffraction （XRD）, Fourier transform infrared spectroscopy （FT-IR）, nitrogen adsorption-desorption analysis, ultraviolet-visible absorption spectrum （UV-Vis） and scanning electron microscopy （SEM）. The XRD and FT-IR results displayed that the catalysts had uniform anatase phase and the primary Keggin structure of H3PW12O40 remain intact. Nitrogen ad-sorption-desorption analysis suggested that suitable doping of rare earth elements could increase the specific surface area from 177.9 m2/g （H3PW12O40/TiO2） to 229.5 （1 wt.%Y-H3PW12O40/TiO2） or 236.1 m2/g （1 wt.%La-H3PW12O40/TiO2）. Results of UV-Vis spectra showed that the band of the 1 wt.%Y-H3PW12O40/TiO2 and 1 wt.%La-H3PW12O40/TiO2 have an obvious redshift compared with the H3PW12O40/TiO2. Additionally, the composites were used as heterogeneous photocatalysts to the degradation of dinitrotoluene （DNT）. It is the first time that polyoxometalate （POM） is applied in the degradation of explosive wastewater.     

Study on Aldol Condensation of HCHO and CH3 CHO over MgO Catalysts Modified by Lanthanum and Cerium

Aldol condensation of HCHO and CH3CHO over MgO, modified MgO and Al2O3 with rare earth oxides,was studied. The measurement of adsorption of pyrrole on catalysts by in-situ FT-IR and NH3 TPD indicated thatthe addition of elements La or Ce into MgO increased the acidity of the solid. In-situ FI‘-IR showed that the activation of - C = O in HCHO adsorbed on CeO-MgO and La2O3-MgO occurred. The measurement of catalytic activity implied that the modified catalysts can promote the formation of pentaerythritol, dipentaerthritol and tripentaerythritol.     

Partial Oxidation of Methane to Syngas over Monolithic Ni/γ-Al2O3 Catalyst——Effects of Rare Earths and Other Basic Promoters

A series of monolithic Ni/γ-Al2O3 catalysts with and without basic promoters (Na, Sr, La, Ce) were prepared. Partial oxidation of methane (POM) to syngas was carried out in a continuous-flow, fixed-bed reactor. The influences of reaction conditions, including temperature, CH4/O2 ratio and space velocity, on the performance of the catalyst were investigated. The results show that at a high space velocity of 1×105 h-1, optimal CH4 conversion can be obtained. Effects of promoters such as Na, Sr, Ce, La were also investigated, and the catalyst samples were characterized by means of temperature-programmed reduction and XRD techniques. XRD suggests that the addition of promoters has no influence on the crystal structure of Ni/γ-Al2O3 catalyst. The results show that the addition of a small amount of promoters improves the reducibility and activity of the catalyst. The side reaction CH4 2 O2→CO2 H2O, is fully restrained and 100% H2 selectivity is achieved when Ce and La are used as promoters, respectively.     

CeO2-Co3O4 Catalysts for CO Oxidation

CeO2-Co3O4 catalysts for low-temperature CO oxidation were prepared by a co-precipitation method. In combination with the characterization methods of N2 adsorption/desorption, XRD, temperature-programmed reduction （TPR）, and FT-IR, the influence of the cerium content on the catalytic performance of CeO2-Co3O4 was investigated. The results indicate that the prepared CeO2-Co3O4 catalysts exhibit a better activity than that of pure CeO2 or pure Co3O4. The catalyst with the Ce/Co atomic ratio 1 ： 16 exhibits the best activity, which converts 77% of CO at room temperature and completely oxidizes CO at 45 ℃.     

Synthesis of mesoporous CeO2-MnOx binary oxides and their catalytic performances for CO oxidation

Mesoporous CeO2-MnOx binary oxides with different Mn/Ce molar ratios were prepared by hydrothermal synthesis and characterized by scanning electron microscopy （SEM）, N2 sorption, X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and H2 temperature-programmed reduction （H2-TPR）. The characterization results indicated that the CeO2-MnOx catalysts exhibited flower-like microspheres with high specific surface areas, and partial Mn cations could be incorporated into CeO2 lattice to form solid solution. The CeO2-MnOx catalysts showed better catalytic activity for CO oxidation than that prepared by the coprecipitation method. Furthermore, the CeO2-MnOx catalyst with Mn/Ce molar ratio of 1 in the synthesis gel （Ce-Mn-1） exhibited the best catalytic activity, over which the conversion of CO could achieve 90% at 135 ℃. This was ascribed to presence of more Mn species with higher oxida- tion state on the surface and the better reducibility over the Ce-Mn-I catalyst than other CeO2-MnOx catalysts.     

Lanthanum incorporated in MCM-41 and its application as a support for a stable Ni-based methanation catalyst

Herein, lanthanum was incorporated via hydrothermal synthesis into a MCM-41 framework structure with La/Si molar ratios from 0.01 to 0.1. Samples of NiO supported on LaMCM-41 were prepared using the impregnation method. The catalyst performance was evaluated using a fixed bed CO methanation reactor. A Ni/LaMCM-41 catalyst with La/Si = 0.1 shows the best catalytic performance with a CO conversion of almost 100% and a CH4 selectivity of 89.5% at 250 ℃ under a pressure of 1.5 MPa and at an airspeed of 36,000 mL/(g·h). Compared with Ni-La/MCM-41(La/Si = 0.1) and Ni/MCM-41 prepared via the impregnation method, Ni/LaMCM-41(La/Si = 0.1) shows a higher CO conversion and CH4 selectivity.In a 100 h stability test, the Ni/LaMCM-41(La/Si = 0.1) catalyst shows excellent stability; furthermore, the CO conversion is always greater than 98.0%, which is significantly better than the results for Ni/MCM-41.We experimentally demonstrate that elemental La enters the framework of MCM-41. The Ni/LaMCM-41 catalyst performs well because the La reduces the average particle size of the NiO particles and enhances the interaction between NiO and MCM-41; moreover, the introduction of La significantly inhibits the sintering of the catalyst and the formation of carbon deposits.     

Effects of cerium doping position on physicochemical properties and catalytic performance in methanol total oxidation

The physicochemical properties of Pd and PdPt catalysts which possess different Ce doping position were investigated by techniques of TEM, XRD, N₂ adsorption-desorption, XPS and FT-IR. The catalytic performance for methanol total oxidation was examined to study the effects of Ce adding position. CeO₂Al₂O₃TiO₂ (CAT) catalysts that Ce is directly introduced into support show higher reactivity and CO₂ selectivity than CeO₂/Al₂O₃TiO₂ (Ce/AT) samples in which Ce is loaded by impregnation method. The characterization results reveal that the Ce doping position does not cause obvious otherness of basic crystalline phase and mesoporous structure of support. However, the Ce doping position affects the pore shapes of support and then influences the pore diameter. CAT catalysts possess more abundant adsorbed oxygen and more Ti³⁺ can transform the more gaseous oxygen into the active oxygen species on the catalyst surface, which is beneficial to the reaction. The AlOTi bridges in CAT facilitate the cooperation of Al and Ti species, which further speeds up the reaction rate.     

Ti4+掺杂纳米CeO2的制备及其抗紫外性能

以Ce(SO4)2.4H2O为主要材料,采用超声-沉淀法制备了掺杂Ti4+的纳米CeO2,并研究了掺杂Ti4+离子对CeO2的晶型和抗紫外性能的影响。用X-ray衍射、傅立叶红外光谱仪、紫外分光光度计、对其进行了表征。测试结果表明,CeO2晶型为面心立方,粒径范围15nm～25 nm,并且CeO2的红外吸收峰明显发生蓝移。当Ti/Ce摩尔比为0.4∶1时吸收性能最好,使CeO2的光谱响应范围变宽。单体CeO2的紫外屏蔽范围在250nm～350 nm,掺杂了Ti4+离子的CeO2的紫外屏蔽范围在220nm～450 nm。     

MCM-41 supported nano-sized CuO-CeO_2 for catalytic combustion of chlorobenzene

In this paper,MCM-41 was synthesized by a soft template technique and MCM-41 supported CuO-CeO_2 nano-sized catalysts with different Cu/Ce molar ratios were prepared by a deposition-precipitation method.N_2 adsorption,HRTEM-EDS,H_2-TPR,XPS characterization,as well as catalytic activity and durability tests for the catalytic combustion of chlorobenzene(CB) were conducted to explore the relationship between the structure and catalytic performance of the catalysts.It is revealed that cuCe(6:1)/MCM-41 has the highest activity and can completely catalyze the degradation of CB at 260℃.The reasons for the high activity of the catalysts are as follows:MCM-41,a type of mesoporous material which has large pore size and large specific surface area,is suitable as a catalyst carrier.The average diameter of nano-sized CuO and CeO_2 particles is about 3-5 nm and adding CeO_2 improves the dispersion of active component CuO,which are highly and evenly dispersed on the surface of MCM-41.Characterization results also explain why MCM-41 supported CuO-CeO_2 with appropriate proportion can highly enhance the catalytic activity.The reason is that CeO_2 acting as an oxygen-rich material can improve the mobility of oxygen species through continuous redox between Ce~(4+)and Ce~(3+),and improve the catalytic performance of CuO for CB combustion.Besides,CuCe(6:1)/MCM-41 also displays good durability for CB combustion,both in the humid condition and in the presence of benzene,making it a promising catalytic material for the elimination of chlorinated VOCs.     

Preparation and characterization of Ce1-xFexO2 complex oxides and its catalytic activity for methane selective oxidation

A series of Ce1-xFexO2 （x=0, 0.2, 0.4, 0.6, 0.8, 1） complex oxide catalysts were prepared using the coprecipitation method. The catalysts were characterized by means of XRD and H2-TPR. The reactions between methane and lattice oxygen from the complex oxides were investigated. The characteristic results revealed that the combination of Ce and Fe oxide in the catalysts could lower the temperature necessary to reduce the cerium oxide. The catalytic activity for selective CH4 oxidation was strongly influenced by dropped Fe species. Adding the appropriate amount of Fe2O3 to CeO2 could promote the action between CH4 and CeO2. Dispersed Fe2O3 first returned to the original state and would then virtually form the Fe species on the catalyst, which could be considered as the active site for selective CH4 oxidation. The appearance of carbon formation was significant and the oxidation of carbon appeared to be the rate-determining step; the amounts of surface reducible oxygen species in CeO2 were also relevant to the activity. Among all the catalysts, Ce0.6Fe0.402 exhibited the best activity, which converted 94.52% of CH4 at 900 ℃.     

Rare earth oxide modified Cu-Mn compounds supported on TiO₂ catalysts for low temperature selective catalytic oxidation of ammonia and in lean oxygen

Selective catalytic oxidation(SCO) of ammonia was carried out over Cu-Mn compounds catalysts modified with trivalent rare earth oxide Ce2O3 and La2O3 respectively.TiO2 was used as support and different ratio of O2 were tested in order to find an appropriate O2 concentration(vol.%),and the results showed that 1%O2(vol.%) was propitious to SCO of ammonia.The effects of the two rare earth oxides modified catalysts Ce2O3-Cu-Mn/TiO2 and La2O3-Cu-Mn/TiO2 on the catalytic activity and selectivity of ammonia oxidation were investigated under the reaction condition of 500 ppm ammonia,1%O2(vol.%),at the temperature from 125 to 250 oC.The results revealed the beneficial role of Ce2O3 and La2O3 in catalytic activity at low temperature and lean oxygen concentration,while the modification with Ce2O3 and La2O3 led to the negative influence on N2 selectivity.For the catalysts modified with Ce showed lower NO and N2O selectivity than the catalysts modified with La,then the effects of different Ce loadings on catalytic activity and selectivity were also considered,in combination with catalysts preparation methods,which include incipient wet impregnation,sol-gel method and co-precipitation.Results revealed that the catalysts prepared by sol-gel method obtained preferable catalytic activity compared with the others,reaching 99% ammonia at 200 oC,whereas 96% NO was detected.It also indicated that different catalyst preparation method significantly determined production distribution.     

Low-temperature catalytic oxidation of NO over Mn-Ce-O_x catalyst

A series of manganese-cerium oxide catalysts were prepared by different methods and used for low-temperature catalytic oxidation of NO in the presence of excess O2.Their surface properties were evaluated by means of BET and were characterized by using scanning electron microscopy(SEM) and X-ray diffractometer(XRD).The activity test of Mn-Ce-Ox catalysts showed that addition of Ce enhanced the activities of NO oxidation.The most active catalysts with a molar Ce/(Mn+Ce) ratio of 0.3 were prepared by co-precipitation method.The results showed that NO conversion reached 60% at 150 °C with a high space velocity of 50902 h-1.The effect of doping different rare earth oxides was also investigated and the addition of small amount of Ce not only increased the surface area of MnOx but also enhanced the dispersion of Mn species in the catalyst shown by BET,SEM and XRD.     

Synthesis and Photocatalytic Activity of TiO2/V2O5 Composite Catalyst Doped with Rare Earth Ions

TiO2/V2O5 catalyst doped with rare earth ions was prepared by sol-gel method. Titanium tetrapropoxide and vanadium pentoxide were used as precursor of the composite catalyst and rare earth ions were used as dopant. The crystal phases, crystalline sizes, microstructure, absorption spectra of doped composite catalyst were studied by XRD, EDS, FT-IR and UV-Vis. Photoactivity of the prepared catalyst under ultraviolet irradiation were evaluated by degradation of methyl orange （MO） in aqueous solution. It is shown that the prepared catalyst is composed of anatase and futile. The rare earth ions are highly dispersed in composite catalyst. All the doped catalysts appear higher photocatalytic activity than TiO2/V2O5 catalyst and catalyst doped with Ce^4＋ present the best activity to MO.