Developing efficient water-splitting electrocatalysts, particularly for the anodic oxygen evolution reaction (OER), is an important challenge in energy conversion technologies. In this study, we report the development of iron-doped nickel disulfide nanoarray on Ti mesh (Fe0.1-NiS2 NA/Ti) via the sulfidation of its nickel–iron-layered double hydroxide precursor (NiFe-LDH NA/Ti). As a three-dimensional OER anode, Fe0.1-NiS2 NA/Ti exhibits remarkable activity and stability in 1.0 M KOH, with the requirement of a low overpotential of 231 mV to achieve 100 mA·cm?2. In addition, it exhibits excellent activity and durability in 30 wt.% KOH. Notably, this electrode is also efficient for the cathodic hydrogen evolution reaction under alkaline conditions.
Sandwich structured graphene-wrapped FeS-graphene nanoribbons (G@FeS-GNRs) were developed. In this composite, FeS nanoparticles were sandwiched between graphene and graphene nanoribbons. When used as anodes in lithium ion batteries (LIBs), the G@FeS-GNR composite demonstrated an outstanding electrochemical performance. This composite showed high reversible capacity, good rate performance, and enhanced cycling stability owing to the synergy between the electrically conductive graphene, graphene nanoribbons, and FeS. The design concept developed here opens up a new avenue for constructing anodes with improved electrochemical stability for LIBs.
The single crystalline nanostructure of organic semiconductors provides a very promising class of materials for applications in modern optoelectronic devices. However, morphology control and optoelectronic property modulation of high quality single crystalline samples remain a challenge. Here, we report the morphology-controlled growth of single crystalline nanorod arrays of perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA). We demonstrate that, unlike PTCDA film, PTCDA nanorods exhibits optical waveguide features, enhanced absorption, and Frenkel excitation emission in the visible region. Additionally, we measured the electrical properties of PTCDA nanorods, including the conductivity along the growth direction of the nanorod, which is roughly 0.61 S·m–1 (much higher than that of pure crystalline PTCDA films).
Densely packed and ordered “suprastructures” are new types of nanomaterials exhibiting broad applications. The direct self-assembly of cetyltrimethylammonium bromide (CTAB)-capped gold nanotriangles to form “suprastructures” was systematically investigated by varying the temperature and tilt angle of the silicon wafer used in the assembly process. Under optimal conditions, nanotriangles form into regular patterns, maintain their integrity, and form edge-to-edge, point-to-point, and face-to-face connections to form ordered “suprastructures” within an area of hundreds of square microns, achieving a high level of regularity. The formation of the “suprastructures” under optimal conditions could be mainly attributed to the complex balance between multiple temperature-dependent factors, including the atom diffusion rate, solvent evaporation rate, self-assembly rate, and the time for which the nanoparticle stays in the wet medium.
Planar micro-supercapacitors (MSCs) have drawn extensive research attention owing to their unique structural design and size compatibility for microelectronic devices. Graphene has been widely used to improve the performance of microscale electrochemical capacitors. However, investigations of an intrinsic electrochemical mechanism for graphene-based microscale devices are still not sufficient. Here, micro-supercapacitors with various typical architectures are fabricated as models to study the graphene effect, and their electrochemical performance is also evaluated. The results show that ionic accessibility and adsorption are greatly improved after the introduction of the holey graphene intermediate layer. This study provides a new route to understand intrinsic electrochemical behaviors and possesses exciting potential for highly efficient on-chip micro-energy storage.
In this study, a potentially universal new strategy is reported for the large-scale, low-cost fabrication of visible-light-active highly ordered heteronanostructures based on the spontaneous photoelectric-field-enhancement effect inherent in pyramidal morphology. The hierarchical vertically oriented arrayed structures comprise an active molecular co-catalyst at the apex of a visible-light-active large band gap semiconductor for low-cost solar water splitting in a neutral aqueous medium without the use of a sacrificial agent.
Zinc-air batteries have recently attracted considerable interest owing to the larger storage capacity and lower cost compared to their lithium-ion counterparts. Electrode catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) play a critical role in the operation of rechargeable zinc-air batteries. Herein, we report a simple and scalable strategy to fabricate porous carbon polyhedra using Zn-doped Co-based zeolitic imidazolate frameworks (ZnCo-ZIFs) as precursors. Strikingly, Zn doping leads to smaller Co nanoparticles and higher nitrogen content, which in turn enhances the ORR and OER activities of the obtained porous carbon polyhedra. The synergistic effect of the N-doped carbon and cobalt nanoparticles in the composite, the improved conductivity resulting from the high graphitization of carbon, and the large surface area of the porous polyhedral structure resulted in porous carbon polyhedra with excellent ORR and OER electrocatalytic activity in alkaline media. More importantly, air cathodes based on the optimal porous carbon polyhedra further exhibited superior performance to Pt/C catalysts in primary and rechargeable zinc-air batteries.
The mechanism of strain-dependent luminescence is important for the rational design of pressure-sensing devices. The interband momentum-matrix element is the key quantity for understanding luminescent phenomena. We analytically solved an infinite quantum well (IQW) model with strain, in the framework of the 6 × 6 k·p Hamiltonian for the valence states, to directly assess the interplay between the spin-orbit coupling and the strain-induced deformation potential for the interband momentum-matrix element. We numerically addressed problems of both the infinite and IQWs with piezoelectric fields to elucidate the effects of the piezoelectric potential and the deformation potential on the strain-dependent luminescence. The experimentally measured photoluminescence variation as a function of pressure can be qualitatively explained by the theoretical results.
Formic acid oxidation is an important electrocatalytic reaction in protonexchange membrane (PEM) fuel cells, in which both active sites and species adsorption/activation play key roles. In this study, we have developed hollow Pd-Ag alloy nanostructures with high active surface areas for application to electrocatalytic formic acid oxidation. When a certain amount of Ag is incorporated into a Pd lattice, which is already a highly active material for formic acid oxidation, the electrocatalytic activity can be significantly boosted. As indicated by theoretical simulations, coupling between Pd and Ag induces polarization charges on Pd catalytic sites, which can enhance the adsorption of HCOO* species. As a result, the designed electrocatalysts can achieve reduced Pd usage and enhanced catalytic properties at the same time. This study represents an approach that simultaneously fabricates hollow structures to increase the number of active sites and utilizes interatomic interactions to tune species adsorption/activation towards improved electrocatalytic performance.
We demonstrate an easy and scalable low-temperature process to convert porous ternary complex metal oxide nanoparticles from solution-synthesized core/shell metal oxide nanoparticles by thermal annealing. The final products demonstrate superior electrochemical properties with a large capacity and high stability during fast charging/discharging cycles for potential applications as advanced lithium-ion battery (LIB) electrode materials. In addition, a new breakdown mechanism was observed on these novel electrode materials.
Highly efficient metal-free, carbon-based, bi-functional electrocatalysts for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) have attracted increased attention for use in electrochemical energy conversion systems, owing to their low cost and high activity. In this work, N-doped carbon nanocages (N-CCs) with a porous self-supported architecture and high specific surface area are synthesized by a facile interfacial assembly synthetic route. The materials are comprehensively characterized by scanning electron microscopy, transmission electron microscopy, nitrogen adsorption–desorption experiments, X-ray diffraction, and X-ray photoelectron spectroscopy. Cyclic voltammetry, chronoamperometry, and linear sweep voltammetry demonstrate that the as-prepared N-CC could serve as an effective metal-free electrocatalyst with excellent catalytic activity, long-term operation durability, and excellent methanol tolerance for the ORR in alkaline media. In the presence of 3 mM methanol, the half wave potential of the N-CCs for the ORR is 190 mV; this is more positive than that of the commercial Pt/C electrocatalyst. Meanwhile, the N-CCs also show an OER activity comparable to that of the commercial Ru/C electrocatalyst, revealing their bifunctional property.
Metal nanowire networks represent a promising candidate for the rapid fabrication of transparent electrodes with high transmission and low sheet-resistance values at very low deposition temperatures. A commonly encountered challenge in the formation of conductive nanowire electrodes is establishing high-quality electronic contact between nanowires to facilitate long-range current transport through the network. A new system involving nanowire ligand removal and replacement with a semiconducting sol-gel tin oxide matrix has enabled the fabrication of high-performance transparent electrodes at dramatically reduced temperatures with minimal need for post-deposition treatment.
Nanomaterials with unique edge sites have received increasing attention due to their superior performance in various applications. Herein, we employed an effective ethylenediaminetetraacetic acid (EDTA)-assisted method to synthesize a series of exotic Bi2Se3 nanostructures with distinct edge sites. It was found that the products changed from smooth nanoplates to half-plate-containing and crown-like nanoplates upon increasing the molar ratio of EDTA to Bi3+. Mechanistic studies indicated that, when a dislocation source and relatively high supersaturation exist, the step edges in the initially formed seeds can serve as supporting sites for the growth of epilayers, leading to the formation of half-plate-containing nanoplates. In contrast, when the dislocation source and a suitably low supersaturation are simultaneously present in the system, the dislocation-driven growth mode dominates the process, in which the step edges form at the later stage of the growth responsible for the formation of crown-like nanoplates.
The persistent need for a sustainable energy economy has led researchers to focus on novel energy conversion and storage technologies, inspiring the discovery of smart material designs such as hierarchical nanocomposites. These nanocomposites have proven effective in the advancement of energy-based technologies. The synergistic properties of hierarchical nanocomposites composed of two types of two-dimensional layered materials, layered double hydroxides and graphene, have resulted in improved electrochemical as well as photocatalytic performance. Synthetic strategies and their effect on the electrochemical and photocatalytic performance of these nanocomposites as high-performance supercapacitors and water oxidation catalysts are discussed in detail in this review.
By means of vibrational spectroscopy and density functional theory (DFT), we investigate CO adsorption on phosphorene-based systems. We find stable CO adsorption at room temperature on both phosphorene and bulk black phosphorus. The adsorption energy and vibrational spectrum are calculated for several possible configurations of the CO overlayer. We find that the vibrational spectrum is characterized by two different C–O stretching energies. The experimental data are in good agreement with the prediction of the DFT model and reveal the unusual C–O vibrational band at 165–180 meV, activated by the lateral interactions in the CO overlayer.
The triboelectric nanogenerator (TENG) has emerged as a new and effective mechanical energy harvesting technology. In this work, a theoretical model for a rotary-sliding disk TENG with grating structure was constructed, including the dielectric-to-dielectric and conductor-to-dielectric cases. The finite element method (FEM) was utilized to characterize the fundamental physics of the rotarysliding disk TENG working in both contact and non-contact modes. The basic properties of disk TENG were found to be controlled by the structural parameters such as tribo-surface spacing, grating number, and geometric size. From the FEM calculations, an approximate V–Q–α relationship was built through the interpolation method, and then the TENG dynamic output characteristics with arbitrary load resistance were numerically calculated. Finally, the dependencies of output power and matched resistance on the structural parameters and rotation rate were revealed. The present work provides an in-depth understanding of the working principle of the rotary-sliding disk TENG and serves as important guidance for optimizing TENG output performance in specific applications.
Electronic adjustment is one of the most commonly used strategies to improve the catalytic performance of heterogeneous catalysts. We prepared hexagonal ultrathin Pd nanosheets with edges modified by gold nanoparticles (Au@Pd nanosheets) using galvanic replacement method. By virtue of the electronic interactions between the Pd nanosheets and Au nanoparticles, the Au@Pd nanosheets exhibited excellent catalytic performances in the carbonylation of iodobenzene by carbon monoxide. The novel nanocomposites could be applied as model catalysts to explore electronic effects in catalysis.
In-plane symmetry is an important contributor to the physical properties of two-dimensional layered materials, as well as atomically thin heterojunctions. Here, we demonstrate anisotropic/isotropic van der Waals (vdW) heterostructures of ReS2 and MoS2 monolayers, where interlayer coupling interactions and charge separation were observed by in situ Raman-photoluminescence spectroscopy, electrical, and photoelectrical measurements. We believe that these results could be helpful for understanding the fundamental physics of atomically thin vdW heterostructures and creating novel electronic and optoelectronic devices.
Multi-shelled CoFe2O4 hollow microspheres with a tunable number of layers (1–4) were successfully synthesized via a facile one-step method using cyclodextrin as a template, followed by calcination. The structural features, including the shell number and shell porosity, were controlled by adjusting the synthesis parameters to produce hollow spheres with excellent capacity and durability. This is a straightforward and general strategy for fabricating metal oxide or bimetallic metal oxide hollow microspheres with a tunable number of shells.
RuCu nanocages and core–shell Cu@Ru nanocrystals with ultrathin Ru shells were first synthesized by a one-pot modified galvanic replacement reaction. The construction of bimetallic nanocrystals with fully exposed precious atoms and a high surface area effectively realizes the concept of high atom-efficiency. Compared with the monometallic Ru/C catalyst, both the RuCu nanocages and Cu@Ru core–shell catalysts supported on commercial carbon show superior catalytic performance for the regioselective hydrogenation of quinoline toward 1,2,3,4-tetrahydroquinoline. RuCu nanocages exhibit the highest activity, achieving up to 99.6% conversion of quinoline and 100% selectivity toward 1,2,3,4-tetrahydroquinoline.
