Green synthesis of magnetically recoverable Fe3 O4 /HZSM‐5 and its Ag nanocomposite using Juglans regia L. leaf extract and their evaluation as catalysts for reduction of organic pollutants

In this work, an Fe₃ O₄ /HZSM‐5 nanocomposite was synthesised in the presence of Juglans regia L. leaf extract. Then, silver nanoparticles (Ag NPs) were immobilised on the surface of prepared magnetically recoverable HZSM‐5 using selected extract for reduction of Ag⁺ ions to Ag NPs and their stabilisation on the surface of the nanocomposite. The reduction of Ag⁺ ions occurs at room temperature within a few minutes. Characterisation of the prepared catalysts has been carried out using fourier transform infrared (FT‐IR), X‐ray diffraction, field‐emission scanning electron microscopy (FESEM), energy‐dispersive spectroscopy, Brunauer–Emmett–Teller method, and a vibrating sample magnetometer. According to the FESEM images of the nanocomposites, the average size of the Ag NPs on the Fe₃ O₄ /HZSM‐5 surface was >70 nm. The Ag/Fe₃ O₄ /HZSM‐5 nanocomposite was a highly active catalyst for the reduction of methyl orange and 4‐nitrophenol in aqueous medium. The utilisation of recycled catalyst for three times in the reduction process does not decrease its activity.Inspec keywords: silver, X‐ray chemical analysis, X‐ray diffraction, nanocomposites, reduction (chemical), nanofabrication, nanoparticles, transmission electron microscopy, catalysts, Fourier transform infrared spectra, iron compounds, field emission scanning electron microscopy, zeolites, magnetometry, particle sizeOther keywords: Ag‐Fe₃ O₄ , temperature 293 K to 298 K, green synthesis, catalyst material, 4‐nitrophenol reduction, methyl orange reduction, particle size, vibrating sample magnetometry, Brunauer–Emmett–Teller method, field‐emission scanning electron microscopy, X‐ray diffraction, FT‐IR spectroscopy, silver nanoparticles, Juglans regia L. leaf extract, organic pollutant reduction, magnetically recoverable nanocomposites, energy‐dispersive spectroscopy     

Enhanced wound healing activity of Ag–ZnO composite NPs in Wistar Albino rats

In the present study, silver (Ag) and Ag–zinc oxide (ZnO) composite nanoparticles (NPs) were synthesised and studied their wound‐healing efficacy on rat model. Ultraviolet–visible spectroscopy of AgNPs displayed an intense surface plasmon (SP) resonance absorption at 450 nm. After the addition of aqueous Zn acetate solution, SP resonance band has shown at 413.2 nm indicating a distinct blue shift of about 37 nm. X‐ray diffraction analysis Ag–ZnO composite NPs displayed existence of two mixed sets of diffraction peaks, i.e. both Ag and ZnO, whereas AgNPs exhibited face‐centred cubic structures of metallic Ag. Scanning electron microscope (EM) and transmission EM analyses of Ag–ZnO composite NPs revealed the morphology to be monodispersed hexagonal and quasi‐hexagonal NPs with distribution of particle size of 20–40 nm. Furthermore, the authors investigated the wound‐healing properties of Ag–ZnO composite NPs in an animal model and found that rapid healing within 10 days when compared with pure AgNPs and standard drug dermazin.Inspec keywords: wounds, tissue engineering, biomedical materials, nanocomposites, nanofabrication, nanomedicine, silver, zinc compounds, II‐VI semiconductors, wide band gap semiconductors, ultraviolet spectra, visible spectra, nanoparticles, particle size, surface plasmon resonance, spectral line shift, X‐ray diffraction, scanning electron microscopy, transmission electron microscopyOther keywords: enhanced wound healing activity, Ag‐ZnO composite nanoparticles, Wistar Albino rats, wound‐healing efficacy, ultraviolet‐visible spectroscopy, intense surface plasmon resonance absorption, aqueous Zn acetate solution, SP resonance band, blue shift, X‐ray diffraction analysis, diffraction peaks, face‐centred cubic structures, scanning electron microscope, SEM, transmission electron microscope, TEM, monodispersed hexagonal nanoparticles, quasihexagonal nanoparticles, particle size, animal model, time 10 d, size 20 nm to 40 nm, Ag‐ZnO     

Evaluation of antibacterial property of hydroxyapatite and zirconium oxide‐modificated magnetic nanoparticles against Staphylococcus aureus and Escherichia coli

In the first section of this research, superparamagnetic nanoparticles (NPs) (Fe₃ O₄) modified with hydroxyapatite (HAP) and zirconium oxide (ZrO₂) and thereby Fe₃ O₄ /HAP and Fe₃ O₄ /ZrO₂ NPs were synthesised through co‐precipitation method. Then Fe₃ O₄ /HAP and Fe₃ O₄ /ZrO₂ NPs characterised with various techniques such as X‐ray photoelectron spectroscopy, X‐ray diffraction, scanning electron microscopy, energy dispersive X‐ray analysis, Brunauer–Emmett–Teller, Fourier transform infrared, and vibrating sample magnetometer. Observed results confirmed the successful synthesis of desired NPs. In the second section, the antibacterial activity of synthesised magnetic NPs (MNPs) was investigated. This investigation performed with multiple microbial cultivations on the two bacteria; Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Obtained results proved that although both MNPs have good antibacterial properties, however, Fe₃ O₄ /HAP NP has greater antibacterial performance than the other. Based on minimum inhibitory concentration and minimum bactericidal concentration evaluations, S. aureus bacteria are more sensitive to both NPs. These nanocomposites combine the advantages of MNP and antibacterial effects, with distinctive merits including easy preparation, high inactivation capacity, and easy isolation from sample solutions by the application of an external magnetic field.Inspec keywords: nanocomposites, X‐ray chemical analysis, microorganisms, magnetic particles, scanning electron microscopy, precipitation (physical chemistry), nanomagnetics, X‐ray diffraction, X‐ray photoelectron spectra, nanoparticles, superparamagnetism, iron compounds, antibacterial activity, biomedical materials, nanomedicine, calcium compounds, nanofabrication, Fourier transform infrared spectra, magnetometers, zirconium compoundsOther keywords: antibacterial effects, antibacterial property, superparamagnetic nanoparticles, X‐ray photoelectron spectroscopy, X‐ray diffraction, X‐ray analysis, antibacterial activity, bactericidal concentration, S. aureus bacteria, Staphylococcus aureus, Escherichia coli, hydroxyapatite, coprecipitation method, scanning electron microscopy, energy dispersive X‐ray analysis, Brunauer‐Emmett‐Teller method, Fourier transform infrared spectroscopy, vibrating sample magnetometer, microbial cultivations, nanocomposites     

Green synthesis of the Ag/ZnO nanocomposite using Valeriana officinalis L. root extract: application as a reusable catalyst for the reduction of organic dyes in a very short time

A facile and green synthesis of the Ag/ZnO nanocomposite by extract of Valeriana officinalis L. root in the absence of any stabiliser or surfactant has been reported in this work. The green synthesised Ag/ZnO nanocomposite was characterised by Field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy dispersive X‐ray spectroscopy (EDS), elemental mapping, Fourier‐Transform infrared (FT‐IR), X‐ray diffraction analysis (XRD) and UV‐Vis spectroscopy. According to SEM and TEM images, the Ag and ZnO particles are spherical with diameters of less than 20 and 40–50 nm, respectively. The Ag NPs/ZnO nanocomposite proved to be an effective catalyst in the reduction of various dyes including methyl orange (MO), Congo red (CR) and methylene blue (MB) in the presence of NaBH₄ in aqueous media at ambient temperature. A maximum degradation (100%) of dyes was performed using Ag/ZnO nanocomposite. The extraordinary performance of the prepared Ag/ZnO nanocomposite is attributed to the synergetic effect induced by both ZnO and Ag NPs in the catalytic degradation of organic dyes. The catalyst could be reused and recovered several times with no significant loss of catalytic activity.Inspec keywords: nanocomposites, silver, zinc compounds, II‐VI semiconductors, nanofabrication, catalysts, reduction (chemical), field emission electron microscopy, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectra, ultraviolet spectra, visible spectra, X‐ray diffraction, surface morphology, nanoparticles, dyesOther keywords: green synthesis, nanocomposite, Valeriana officinalis L. root extract, reusable catalyst, reduction, organic dyes, surfactant, field emission scanning electron microscopy, transmission electron microscopy, energy dispersive X‐ray spectroscopy, elemental mapping, Fourier‐transform infrared spectroscopy, X‐ray diffraction analysis, surface morphology, nanoparticles, methyl orange, congo red, methylene blue, UV–Vis spectroscopy, size 40 nm to 50 nm, wavelength 493 nm, wavelength 465 nm, wavelength 663 nm, Ag‐ZnO     

Synthesis of Co3 O4 /graphene nanocomposite using paraffin wax for adsorption of methyl violet in water

This study discusses the use of Co₃ O₄ impregnated graphene (CoOIG) as an efficient adsorbent for the removal of methyl violet (MV) dye from wastewater. CoOIG nanocomposites have been prepared by pyrolyzing paraffin wax with cobalt acetate. The synthesised nanocomposite was characterised by X‐ray diffraction, field emission scanning electron microscope, transmission electron microscope, Fourier transform infrared spectroscope, Raman spectroscopy, and Brunauer–Emmett–Teller isotherm studies. The above studies indicate that the composites have cobalt oxide nanoparticles of size 51–58 nm embedded in the graphene nanoparticles. The adsorption studies were conducted with various parameters, pH, temperature and initial dye concentration, adsorbent dosage and contact time by the batch method. The adsorption of MV dye by the adsorbent CoOIG was about 90% initially at 15 min and 98% dye removal at pH 5. The data were fitted in Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich and Sips isotherm models. Various thermodynamic parameters like Gibbs free energy, enthalpy, and entropy of the on‐going adsorption process have also been calculated.Inspec keywords: cobalt compounds, graphene, nanoparticles, nanocomposites, nanofabrication, adsorption, dyes, scanning electron microscopy, field emission electron microscopy, transmission electron microscopy, Raman spectra, Fourier transform infrared spectra, free energy, enthalpy, entropyOther keywords: nanocomposite, paraffin wax, adsorption, methyl violet dye, water, X‐ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, Brunauer‐Emmett‐Teller isotherm, cobalt oxide nanoparticles, graphene nanoparticles, thermodynamic parameters, Gibbs free energy, enthalpy, entropy, Co₃ O₄ ‐C     

Biogenic synthesis of Au,Ag and Au–Ag alloy nanoparticles using Cannabis sativa leaf extract

Biogenic synthesis of gold (Au), silver (Ag) and bimetallic alloy Au–Ag nanoparticles (NPs) from aqueous solutions using Cannabis sativa as reducing and stabilising agent has been presented in this report. Formation of NPs was monitored using UV–visible spectroscopy. Morphology of the synthesised metallic and bimetallic NPs was investigated using X‐ray diffraction and scanning electron microscopy. Elemental composition and the surface chemical state of NPs were confirmed by energy dispersive X‐ray spectroscopy analysis. Fourier transform‐infrared spectroscopy was utilised to identify the possible biomolecules responsible for the reduction and stabilisation of the NPs. Biological applicability of biosynthesised NPs was tested against five bacterial strains namely Klebsiella pneumonia, Bacillus subtilis (B. subtilis), Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa (P. aeruginosa) and Leishmania major promastigotes. The results showed considerable antibacterial and anti‐leishmanial activity. The Au–Ag bimetallic NPs showed improved antibacterial activity against B. subtilis and P. aeruginosa as compared to Au and Ag alone, while maximum anti‐leishmanial activity was observed at 250 μg ml⁻¹ NP concentration. These results suggest that biosynthesised NPs can be used as potent antibiotic and anti‐leishmanial agents.Inspec keywords: silver, silver alloys, gold, gold alloys, nanoparticles, nanofabrication, reduction (chemical), ultraviolet spectra, visible spectra, X‐ray diffraction, scanning electron microscopy, X‐ray chemical analysis, Fourier transform infrared spectra, microorganisms, antibacterial activityOther keywords: biogenic synthesis, Cannabis sativa leaf extract, bimetallic alloy Au–Ag nanoparticles, aqueous solutions, reducing agent, stabilising agent, UV–visible spectroscopy, X‐ray diffraction, scanning electron microscopy, elemental composition, surface chemical state, energy dispersive X‐ray spectroscopy analysis, Fourier transform‐infrared spectroscopy, biomolecules, bacterial strains, Klebsiella pneumonia, Bacillus subtilis, Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Leishmania major promastigotes, antibacterial activity, anti‐leishmanial activity, Ag, Au, AuAg     

Synthesis,characterisation and bactericidal effect of ZnO nanoparticles via chemical and bio‐assisted (Silybum marianum in vitro plantlets and callus extract) methods: a comparative study

Currently, the evolution of green chemistry in the synthesis of nanoparticles (NPs) with the usage of plants has captivated a great response. In this study, in vitro plantlets and callus of Silybum marianum were exploited as a stabilising agent for the synthesis of zinc oxide (ZnO) NPs using zinc acetate and sodium hydroxide as a substitute for chemical method. The contemporary investigation defines the synthesis of ZnO NPs prepared by chemical and bio‐extract‐assisted methods. Characterisation techniques such as X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy and energy dispersive X‐ray were used to confirm the synthesis. Although chemical and bio‐assisted methods are suitable choices for NPs synthesis, the bio‐assisted green assembly is advantageous due to superior stability. Moreover, this report describes the antibacterial activity of the synthesised NPs against standard strains of Klebsiella pneumonia and Bacillus subtilis.Inspec keywords: zinc compounds, II‐VI semiconductors, wide band gap semiconductors, nanoparticles, nanofabrication, semiconductor growth, antibacterial activity, X‐ray diffraction, X‐ray chemical analysis, scanning electron microscopy, Fourier transform infrared spectra, nanobiotechnologyOther keywords: chemical methods, bio‐assisted methods, Silybum marianum in vitro plantlets methods, Silybum marianum in vitro callus extract methods, green chemistry, zinc oxide nanoparticles, sodium hydroxide, zinc acetate, X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X‐ray analysis, bio‐assisted green assembly, antibacterial activity, Klebsiella pneumonia, Bacillus subtilis, ZnO     

Biosynthesis of waste pistachio shell supported silver nanoparticles for the catalytic reduction processes

Silver nanoparticles (NPs) are immobilised on pistachio shell surface by Cichorium intybus L. leaves extract as an antioxidant media. The Fourier transform infrared spectra, X‐ray diffraction, field‐emission scanning electron microscopy equipped with energy‐dispersive X‐ray spectroscopy, and transmission electron microscope analyses confirmed the support of silver NPs on the pistachio shell (Ag NPs/pistachio shell). Ag NPs on the pistachio shell had a diameter basically in the 10–15 nm range. Reduction reactions of 4‐nitrophenol (4‐NP), and organic dyes at ambient condition were used in the investigation of the catalytic performance of the prepared catalyst. Through this research, the Ag NPs/pistachio shell shows a high activity and recyclability, and reusability without loss of its catalytic activity.Inspec keywords: transmission electron microscopy, nanoparticles, X‐ray diffraction, catalysis, nanofabrication, dyes, X‐ray chemical analysis, reduction (chemical), silver, catalysts, Fourier transform infrared spectra, field emission scanning electron microscopyOther keywords: waste pistachio shell, silver nanoparticles, catalytic reduction processes, pistachio shell surface, antioxidant media, infrared spectra, X‐ray diffraction, field‐emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, transmission electron microscope analyses, reduction reactions, catalytic performance, catalytic activity, Cichorium intybus L. leaves extract, size 10.0 nm to 15.0 nm, Ag     

Facile synthesis of mesoporous alumina using hexadecyltrimethylammonium bromide (HTAB) as template: simplified sol‐gel approach

Herein the authors present the synthesis of surface functionalised mesoporous alumina (MeAl) for textural characterisation by a simplified sol–gel method obtained by using hexadecyltrimethylammonium bromide as a template. Etoricoxib (ETOX) was used as a model drug for the study. Alumina supported mesoporous material containing drug was characterised using instrumental technique namely Brunauer–Emmett–Teller surface area, Fourier transform‐infrared, differential scanning calorimetry, transmission electron microscopy, X‐ray diffraction, and field emission scanning electron microscopy. Diffusion study using a dialysis bag method used to check the release pattern of ETOX‐loaded‐MeAl. Results of characterisation study revealed the successful surface functionalisation of the drug on nanocomposite. The IC₅₀ value obtained from cell viability study demonstrated the non‐toxic behaviour of synthesised drug‐loaded mesoporous alumina up to the tested concentration range. The present work has demonstrated that synthesised MeAl showed excellent stability with an expanded surface area suitable for carrier material for drug delivery system.Inspec keywords: Fourier transform spectra, adsorption, biomedical materials, silicon compounds, drug delivery systems, X‐ray diffraction, alumina, differential scanning calorimetry, nanocomposites, field emission electron microscopy, nanofabrication, nanomedicine, mesoporous materials, transmission electron microscopy, sol‐gel processing, scanning electron microscopyOther keywords: ETOX‐loaded‐MeAl, successful surface functionalisation, synthesised drug‐loaded mesoporous alumina, synthesised MeAl, expanded surface area, drug delivery system, hexadecyltrimethylammonium bromide, sol‐gel approach, surface functionalised mesoporous alumina, simplified sol–gel method, mesoporous material containing drug, Brunauer–Emmett–Teller surface area, Fourier transform‐infrared, differential scanning calorimetry, transmission electron microscopy, X‐ray diffraction, field emission scanning electron microscopy, dialysis bag method     

Polycaprolactone/gelatin electrospun nanofibres containing biologically produced tellurium nanoparticles as a potential wound dressing scaffold: Physicochemical,mechanical, and biological characterisation

The biologically synthesised tellurium nanoparticles (Te NPs) were applied in the fabrication of Te NP‐embedded polycaprolactone/gelatin (PCL/GEL) electrospun nanofibres and their antioxidant and in vivo wound healing properties were determined. The as‐synthesised nanofibres were characterised using scanning electron microscopy (SEM), energy‐dispersive X‐ray (EDX) spectroscopy and elemental mapping, thermogravimetric analysis (TGA), and Fourier‐transform infrared (FTIR) spectroscopy. The mechanical properties and surface hydrophobicity of scaffolds were investigated using tensile analysis and contact angle tests, respectively. The biocompatibility of the produced scaffolds on mouse embryonic fibroblast cells (3T3) was evaluated using MTT assay. The highest wound healing activity (score 15/19) was achieved for scaffolds containing Te NPs. The wounds treated with PCL/GEL/Te NPs had inflammation state equal to the positive control. Also, the mentioned scaffold represented positive effects on collagen formation and collagen fibre''s horizontalisation in a dose‐dependent manner. The antioxidative potency of Te NP‐containing scaffolds was demonstrated with lower levels of malondialdehyde (MDA) and catalase (∼3 times) and a higher level of glutathione (GSH) (∼2 times) in PCL/GEL/Te NP‐treated samples than the negative control. The obtained results strongly demonstrated the healing activity of the produced nanofibres, and it can be inferred that scaffolds containing Te NPs are suitable for wound dressing.     

Green synthesis of CuO nanoparticles loaded on the seashell surface using Rumex crispus seeds extract and its catalytic applications for reduction of dyes

In this study, CuO nanoparticles supported on the seashell (CuO NPs/seashell) was prepared using Rumex crispus seeds extract as a chelating and capping agent. The prepared nanocomposite was characterised by Fourier transform infrared spectroscopy, X‐ray diffraction, field emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy and transmission electron microscopy. The particle size of CuO NPs on the seashell sheets was in the range of 8–60 nm. Catalytic ability of CuO NPs/seashell was investigated for the reduction of 4‐nitrophenol (4‐NP) and Congo red (CR). It was observed that catalyst can be easily recovered and reused several times without any significant loss of catalytic efficiency.Inspec keywords: nanocomposites, nanoparticles, catalysis, dyes, Fourier transform infrared spectra, X‐ray diffraction, field emission electron microscopy, scanning electron microscopy, X‐ray chemical analysis, transmission electron microscopy, particle size, copper compoundsOther keywords: CuO, size 8 nm to 60 nm, Congo red, 4‐nitrophenol, particle size, transmission electron microscopy, energy dispersive X‐ray spectroscopy, field emission scanning electron microscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, nanocomposite, capping agent, chelating agent, dye reduction, catalytic application, Rumex crispus seeds extract, seashell surface, nanoparticles, green synthesis     

Responses of bimetallic Ag/ZnO alloy nanoparticles and urea on morphological and physiological attributes of wheat

Wheat (Triticum aestivum L.) is the most important staple food crop globally. According to economic survey 2018‐19, agriculture sector of Pakistan grew by 0.85%, with wheat accounting for 8.9% of agriculture and 1.6% of GDP, and its production fell short of the target by 4.9%. Wheat requires beneficial ties to improve its efficiency with the help of modern technology. Nanotechnology modifies conventional agricultural practices as these are stimulating agents for plant growth. Green bimetallic Ag/ZnO alloy nanoparticles (NPs) synthesised from salts reduced by Moringa oleifera and characterised by UV‐visible spectroscopy, scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy are studied herein. Different concentrations of urea and Ag/ZnO alloy NPs were applied exogenously to wheat plants (Pakistan‐13 and Galaxy13). A significant effect of 100 mg/L urea and 75 ppm Ag/ZnO alloy NPs was observed on the morphology of wheat, with a maximum increase of 58% plant length, 85% leaf area, 89% plant fresh weight and 76% plant dried weight. In physiological parameters, relative water content and membrane stability index have shown maximum increases of 39% and 77%, while chlorophyll a, b, and total chlorophyll content (TCC) showed maximum increases of 92%, 71%, and 84% respectively. Evidence of the morpho‐physiological responses of urea and green synthesised alloy NPs on wheat varieties are reported on.     

Comparative antileishmanial efficacy of the biosynthesised ZnO NPs from genus Verbena

This study describes ZnO NPs biosynthesis using leaf extracts of Verbena officinalis and Verbena tenuisecta. The extracts serve as natural reducing, capping and stabilization facilitators. Plant extracts phytochemical analysis, revealed that V. officinalis showed higher total phenolic and flavonoid content (22.12 and 6.38 mg g ⁻¹ DW) as compared to V. tennuisecta (12.18 and 2.7 mg g ⁻¹ DW). ZnO NPs were characterised by ultraviolet–visible spectroscopy, Fourier transform infrared, X‐ray diffraction, scanning electron microscope, transmission electron microscopy (TEM) and energy dispersive X‐ray. TEM analysis of ZnO NPs reveals rod and flower shapes and were in the range of 65–75 and 14–31 nm, for V. tenuisecta and V. officinalis, respectively. Bio‐potential of ZnO NPs was examined through their leishmanicidal potential against Leishmania tropica. ZnO NPs showed potent leishmanicidal activity with 250 µg ml⁻¹ being the most potent concentration. V. officinalis mediated ZnO NPs showed more potent leishmanicidal activity compared to V. tenuisecta mediated ZnO NPs due to their smaller size and increased phenolics doped onto its surface. These results can be a step forward towards the development of novel compounds that can efficiently replace the current medication schemes for leishmaniasis treatment.Inspec keywords: ultraviolet spectra, nanomedicine, nanostructured materials, visible spectra, X‐ray diffraction, antibacterial activity, nanoparticles, zinc compounds, scanning electron microscopy, microorganisms, nanofabrication, drugs, transmission electron microscopy, X‐ray chemical analysis, health and safety, particle size, renewable materials, diseases, Fourier transform infrared spectraOther keywords: flavonoid content, natural reducing stabilisation facilitators, ZnO nanoparticles synthesis, antileishmanial efficacy, Verbena tennuisecta, Verbena officinales, phytochemical analysis, phenolic content, ultraviolet–visible spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, transmission electron microscopy, energy dispersive X‐ray analysis, particle size, leishmaniasis treatment, leaf extracts, medication scheme, stabilisation facilitator, capping facilitator, size 14.0 nm to 31.0 nm, size 65.0 nm to 75.0 nm, ZnO     

Green synthesis of nanosilver‐decorated graphene oxide sheets

A green facile method has been successfully used for the synthesis of graphene oxide sheets decorated with silver nanoparticles (rGO/AgNPs), employing graphite oxide as a precursor of graphene oxide (GO), AgNO₃ as a precursor of Ag nanoparticles (AgNPs), and geranium (Pelargonium graveolens) extract as reducing agent. Synthesis was accomplished using the weight ratios 1:1 and 1:3 GO/Ag, respectively. The synthesised nanocomposites were characterised by scanning electron microscopy, transmission electron microscopy, atomic force microscopy, X‐ray diffraction, UV‐visible spectroscopy, Raman spectroscopy, energy dispersive X‐ray spectroscopy and thermogravimetric analysis. The results show a more uniform and homogeneous distribution of AgNPs on the surface of the GO sheets with the weight ratio 1:1 in comparison with the ratio 1:3. This eco‐friendly method provides a rGO/AgNPs nanocomposite with promising applications, such as surface enhanced Raman scattering, catalysis, biomedical material and antibacterial agent.Inspec keywords: silver, nanoparticles, graphene, nanocomposites, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, X‐ray diffraction, ultraviolet spectra, visible spectra, X‐ray chemical analysis, surface enhanced Raman scattering, catalysis, nanofabricationOther keywords: antibacterial agent, biomedical material, catalysis, surface enhanced Raman scattering, rGO‐AgNP nanocomposite, eco‐friendly method, homogeneous distribution, thermogravimetric analysis, energy dispersive X‐ray spectroscopy, Raman spectroscopy, UV‐visible spectroscopy, X‐ray diffraction, atomic force microscopy, transmission electron microscopy, scanning electron microscopy, nanocomposites, reducing agent, geranium, graphene oxide sheets, graphite oxide, silver nanoparticles, green facile method     

Electrospun polyurethane and soy protein nanofibres for wound dressing applications

In this report, a novel wound dressing material has been woven by electrospinning technique and tested for its various properties. For the nanofibre mat, a mixture of polyurethane (PU) and soy protein isolate (SPI) was electrospun in conjugation with zinc oxide nanoparticles (ZnO Nps) and ciprofloxacin hydrochloride (CipHCl) to produce fibrous mats viz. PU/SPI/ZnO and PU/SPI/CipHCl. An optimum ratio (1 : 1) of PU/SPI was used as suitable polymeric ratio in order to produce homogenous nanofibres without beads having an average diameter in the range of 300–350 nm. The electrospun nanofibre‐based mats were characterised using X‐ray diffraction, Fourier transform infrared spectroscopy, ultraviolet‐visible spectroscopy, thermogravimetric analysis and scanning electron microscope. The mechanical properties of the nanofibrous mats were tested using universal testing machine. The wettability analysis was done using the contact angle measurement based on the sessile drop test. This study revealed that the electrospun PU/SPI‐based nanofibres are non‐sensitizing, non‐allergic and non‐toxic and that it can be used as a peculiar wound healing material.Inspec keywords: polymer fibres, nanofibres, nanomedicine, biomedical materials, wounds, electrospinning, zinc compounds, II‐VI semiconductors, wide band gap semiconductors, nanoparticles, nanofabrication, X‐ray diffraction, Fourier transform spectra, infrared spectra, ultraviolet spectra, visible spectra, thermal analysis, scanning electron microscopy, wetting, contact angle, toxicologyOther keywords: electrospun polyurethane nanofibres, soy protein nanofibres, wound dressing applications, electrospinning, nanofibre mat, soy protein isolate, zinc oxide nanoparticles, ciprofloxacin hydrochloride, X‐ray diffraction, Fourier transform infrared spectroscopy, ultraviolet‐visible spectroscopy, thermogravimetric analysis, scanning electron microscope, mechanical properties, universal testing machine, wettability, contact angle measurement, sessile drop test, nonsensitizing nanofibres, nonallergic nanofibres, nontoxic nanofibres, wound healing material, wavelength 300 nm to 350 nm, ZnO     

Catalytic reduction of 2,4‐dinitrophenylhydrazine by cuttlebone supported Pd NPs prepared using Conium maculatum leaf extract

A facile and green process to synthesise cuttlebone supported palladium nanoparticles (Pd NPs/cuttlebone) is reported using Conium maculatum leaf extract and in the absence of chemical solvents and hazardous materials. The antioxidant content of the C. maculatum leaf extract played a significant role in converting Pd²⁺ ions to Pd NPs. Various techniques were used for the characterisation of the Pd NPs/cuttlebone such as field‐emission scanning electron microscopy, X‐ray diffraction, energy dispersive X‐ray spectroscopy, Fourier transform infrared and ultraviolet–visible spectroscopy. This Pd NPs/cuttlebone showed excellent catalytic activity in the reduction of 2,4‐dinitrophenylhydrazine to 2,4‐diaminophenylhydrazine by sodium borohydride as the source of hydrogen at ambient condition. The catalyst could be separated and recycled up to five cycles with no loss of its activity.Inspec keywords: catalysis, catalysts, chemical engineering, palladium, nanoparticles, field emission electron microscopy, scanning electron microscopy, X‐ray diffraction, X‐ray chemical analysis, sodium compounds, ultraviolet spectroscopy, visible spectroscopyOther keywords: catalytic reduction, 2,4‐dinitrophenylhydrazine, cuttlebone, Conium maculatum leaf extract, green process, palladium nanoparticles, antioxidant content, field‐emission scanning electron microscopy, X‐ray diffraction, energy dispersive X‐ray spectroscopy, Fourier transform infrared, ultraviolet–visible spectroscopy, 2,4‐diaminophenylhydrazine, sodium borohydride     

Hypnea musciformis‐mediated Ag/AgCl‐NPs inhibit pathogenic bacteria,HCT‐116 and MCF‐7 cells’ growth in vitro and Ehrlich ascites carcinoma cells in vivo in mice

In the present study, Ag/AgCl‐NPs were biosynthesised using Hypnea musciformis seaweed extract; NPs synthesis was confirmed by a change of colour and observation of a razor‐sharp peak at 424 nm by UV–visible spectroscopy. Synthesised nanoparticles were characterised by transmission electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray powder diffraction and Fourier transform infrared spectroscopy. Bacterial cell growth inhibition proves that the Ag/AgCl‐NPs have strong antibacterial activity and cell morphological alteration was observed in treated bacterial cells using propidium iodide (PI). Ag/AgCl‐NPs inhibited Ehrlich ascites carcinoma (EAC) cells, colorectal cancer (HCT‐116) and breast cancer (MCF‐7) cell line in vitro with the IC₅₀ values of 40.45, 24.08 and 36.95 μg/ml, respectively. Initiation of apoptosis in HCT‐116 and MCF‐7 cells was confirmed using PI, FITC‐annexin V and Hoechst 33342 dye. No reaction oxygen species generation was observed in both treated and untreated cell lines. A significant increase of ATG‐5 gene expression indicates the possibility of autophagy cell death besides apoptosis in MCF‐7 cells. The initiation of apoptosis in EAC cells was confirmed by observing caspase‐3 protein expression. Ag/AgCl‐NPs inhibited 22.83% and 51% of the EAC cell growth in vivo in mice when administered 1.5 and 3.0 mg/kg/day (i.p.), respectively, for 5 consequent days.     

Synthesis of Ag‐NPs impregnated cellulose composite material: its possible role in wound healing and photocatalysis

Cellulose is the natural biopolymer normally used as supporting agent with enhanced applicability and properties. In present study, cellulose isolated from citrus waste is used for silver nanoparticles (Ag‐NPs) impregnation by a simple and reproducible method. The Ag‐NPs fabricated cellulose (Ag‐Cel) was characterised by powder X‐rays diffraction, Fortier transform infrared spectroscopy and scanning electron microscopy. The thermal stability was studied by thermo‐gravimetric analysis. The antibacterial activity performed by disc diffusion assay reveals good zone of inhibition against Staphylococcus aureus and Escherichia coli by Ag‐Cel as compared Ag‐NPs. The discs also displayed more than 90% reduction of S. aureus culture in broth within 150 min. The Ag‐Cel discs also demonstrated minor 2,2‐diphenyl 1‐picryl‐hydrazyl radical scavenging activity and total reducing power ability while moderate total antioxidant potential was observed. Ag‐Cel effectively degrades methylene‐blue dye up to 63.16% under sunlight irradiation in limited exposure time of 60 min. The Ag‐NPs impregnated cellulose can be effectively used in wound dressing to prevent bacterial attack and scavenger of free radicals at wound site, and also as filters for bioremediation and wastewater purification.Inspec keywords: silver, nanoparticles, particle reinforced composites, nanocomposites, filled polymers, wounds, nanomedicine, biomedical materials, photochemistry, catalysis, X‐ray diffraction, Fourier transform infrared spectra, scanning electron microscopy, thermal stability, thermal analysis, antibacterial activity, dyes, wastewater treatment, contaminated site remediation, nanofabricationOther keywords: silver nanoparticles, impregnated cellulose composite, wound healing, photocatalysis, natural biopolymer, citrus waste, powder X‐ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, thermal stability, thermo‐gravimetric analysis, antibacterial activity, disc diffusion assay, Staphylococcus aureus, Escherichia coli, inhibition zone, broth, 2,2‐diphenyl 1‐picryl‐hydrazyl radical scavenging activity, total reducing power ability, total antioxidant potential, methylene‐blue dye, sunlight irradiation, wound dressing, bacterial attack, free radical scavenger, wastewater purification, bioremediation filters, wound site, time 60 min, Ag     

Diospyros assimilis root extract assisted biosynthesised silver nanoparticles and their evaluation of antimicrobial activity

The current research study focuses on biosynthesis of silver nanoparticles (Ag NPs) for the first time from silver acetate employing methanolic root extract of Diospyros assimilis. The UV–Vis absorption spectrum of biologically synthesised nanoparticles displayed a surface plasmon peak at 428 nm indicating the formation of Ag NPs. The influence of metal ion concentration, reaction time and amount of root extract in forming Ag NPs by microscopic and spectral analysis was thoroughly investigated. Structural analysis from transmission electron microscopy confirmed the nature of metallic silver as face‐centered cubic (FCC) crystalline with an average diameter of 17 nm, which correlates with an average crystallite size (19 nm) calculated from X‐ray diffraction analysis. Further, the work was extended for the preliminary examination of antimicrobial activity of biologically synthesised Ag NPs that displayed promising activity against all the tested pathogenic strains.Inspec keywords: antibacterial activity, nanoparticles, silver, particle size, nanofabrication, nanomedicine, biomedical materials, ultraviolet spectra, visible spectra, optical microscopy, surface plasmon resonance, transmission electron microscopy, crystallites, X‐ray diffraction, microorganismsOther keywords: Diospyros assimilis root extract assisted biosynthesised silver nanoparticles, antimicrobial activity, silver acetate, methanolic root extract, UV‐visible absorption spectrum, biologically synthesised nanoparticles, surface plasmon peak, Ag NPs formation, metal ion concentration, reaction time, microscopic analysis, spectral analysis, structural analysis, transmission electron microscopy, metallic silver, FCC crystalline phase, average crystallite size, X‐ray diffraction analysis, pathogenic strains, Ag     

Efficacy of mycosynthesised AgNPs from Earliella scabrosa as an in vitro antibacterial and wound healing agent

The silver nanoparticles (AgNPs) with their unique chemical and physical properties are proving as a new therapeutical agent. In the present study, the AgNPs synthesised from an aqueous extract of a macrofungus, Earliella scabrosa, were characterised by field emission scanning electron microscopy (FESEM), energy dispersive X‐ray analysis (EDX), high‐resolution transmission electron microscopy, X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and further evaluate for its in vitro antibacterial and wound healing efficacy. The mycosynthesised AgNPs exhibited the surface plasmon resonance peak at 410 nm with good stability over a period of a month. The FESEM and EDX analyses revealed the spherical‐shaped AgNPs of an average size of 20 nm and the presence of elemental Ag, respectively. The XRD pattern showed the crystalline nature of AgNPs. The FTIR spectra confirmed the conversion of Ag⁺ ions to AgNPs due to reduction by biomolecules of macrofungus extract. The mycosynthesised AgNPs showed effective antibacterial activity against two Gram‐positive bacteria, namely Bacillus subtilis and Staphylococcus aureus, and two Gram‐negative bacteria Escherichia coli and Pseudomonas aeruginosa. The pathogens were highly sensitive to AgNPs, whereas less sensitive to AgNO₃. The mycosynthesised AgNPs showed significant wound healing potential with 68.58% of wound closure.Inspec keywords: surface plasmon resonance, wounds, X‐ray diffraction, nanoparticles, molecular biophysics, nanomedicine, antibacterial activity, biomedical materials, reduction (chemical), silver, microorganisms, X‐ray chemical analysis, nanofabrication, transmission electron microscopy, particle size, field emission scanning electron microscopy, Fourier transform infrared spectraOther keywords: high‐resolution transmission electron microscopy, healing efficacy, mycosynthesised AgNPs, spherical‐shaped AgNPs, wound healing agent, in vitro antibacterial efficacy, Earliella scabrosa, silver nanoparticles, physical properties, chemical properties, therapeutical agent, aqueous extract, macrofungus, field emission scanning electron microscopy, FESEM, energy dispersive X‐ray analysis, EDX, X‐ray diffraction, XRD, Fourier transform infrared spectroscopy, FTIR spectroscopy, surface plasmon resonance peak, crystalline nature, biomolecules, Gram‐positive bacteria, Bacillus subtilis, Staphylococcus aureus, Gram‐negative bacteria, Escherichia coli, Pseudomonas aeruginosa, pathogens, wound closure, Ag