Biosynthesis of γ ‐Fe2 O3 @CuO core–shell nanoclusters using aqueous extract of Sesbania grandiflora Linn fresh leaves,its characterisation,and antimicrobial activity studies against Staphylococcus aureus strains

The present study reports an eco‐friendly and rapid method for the synthesis of core–shell nanoclusters using the modified reverse micelle method. It is a green synthetic method which uses Sesbania grandiflora Linn extract which acts as a reducing and capping agent. It is observed that this method is very fast and convenient and the nanoclusters are formed with 5–10 min of the reaction time without using harsh conditions. The core–shell nanoclusters so prepared were characterised using UV–Vis spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy. Further, their effective antibacterial activity towards the gram‐positive bacteria Staphylococcus aureus was found to be due to their smaller particle size.Inspec keywords: iron compounds, copper compounds, nanoparticles, particle size, nanofabrication, nanomedicine, biomedical materials, core‐shell nanostructures, antibacterial activity, ultraviolet spectra, visible spectra, microorganisms, reduction (chemical), scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectraOther keywords: biosynthesis, γ‐Fe₂ O₃ ‐CuO core‐shell nanoclusters, aqueous extract, Sesbania grandiflora Linn fresh leaves, antimicrobial activity, Staphylococcus aureus strains, eco‐friendly method, modified reverse micelle method, green synthetic method, reducing agent, capping agent, UV‐visible spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, antibacterial activity, gram‐positive bacteria Staphylococcus aureus, particle size, time 5 min to 10 min, Fe₂ O₃ ‐CuO     

Photocatalytic degradation of synthetic dyes using iron (III) oxide nanoparticles (Fe2 O3 ‐Nps) synthesised using Rhizophora mucronata Lam

Biosynthesis of nanoparticles through plant extracts is gaining attention due to the toxic free synthesis process. The environmental engineering applications of many metal oxide nanoparticles have been reported. In this study, iron oxide nanoparticles (Fe₂ O₃ ‐Nps) were synthesised using a simple biosynthetic method using a leaf extract of a mangrove plant Rhizophora mucronata through reduction of 0.01 M ferric chloride. Fe₂ O₃ ‐Np synthesis was revealed by a greenish colour formation with a surface plasmon band observed close to 368 nm. The stable Fe₂ O₃ ‐Np possessed excitation and emission wavelength of 368.0 and 370.5 nm, respectively. The Fourier‐transform infrared spectral analysis revealed the changes in functional groups during formation of Fe₂ O₃ ‐Np. Agglomerations of nanoparticles were observed during scanning electron microscopic analysis and energy‐dispersive X‐ray spectroscopic analysis confirmed the ferric oxide nature. The average particle size of Fe₂ O₃ ‐Np based on dynamic light scattering was 65 nm. Based on transmission electron microscopic analysis, particles were spherical in shape and the crystalline size was confirmed by selected area electron diffraction pattern analysis. The synthesised Fe₂ O₃ ‐Np exhibited a good photodegradation efficiency with a reduction of 83 and 95% of phenol red and crystal violet under irradiation of sunlight and florescent light, respectively. This report is a facile synthesis method for Fe₂ O₃ ‐Np with high photodegradation efficiency.Inspec keywords: photochemistry, dyes, nanofabrication, transmission electron microscopy, scanning electron microscopy, nanoparticles, iron compounds, X‐ray diffraction, catalysts, catalysis, particle size, X‐ray chemical analysis, electron diffraction, Fourier transform infrared spectra, surface plasmonsOther keywords: energy‐dispersive X‐ray spectroscopic analysis, ferric oxide nature, transmission electron microscopic analysis, selected area electron diffraction pattern analysis, iron oxide nanoparticles, plant extracts, toxic free synthesis process, metal oxide nanoparticles, metal nanoparticles, nanofiltration, nanobiocides, Rhizophora mucronata Lam, crystalline size, phenol red, crystal violet, sunlight irradiation, florescent light, scanning electron microscopic analysis, Fourier‐transform infrared spectral analysis, surface plasmon, ferric chloride, leaf extract, nanocatalysts, nanoadsorbents, photocatalytic degradation, synthetic dyes, mangrove plant, water remediation, wastewater pollutant, wavelength 370.5 nm, wavelength 368.0 nm, Fe₂ O₃      

Rapid synthesis of Bi 2 O 3 nano‐needles via ‘green route’ and evaluation of its anti‐fungal activity

Here, the authors report a rapid, simple, and eco‐friendly process for synthesis of Bi₂ O₃ nano‐needles. Dioscorea alata tuber extract was used as both reducing and capping agent for the first time. These nanoparticles were characterised by X‐ray diffraction, field emission scanning electron microscope, and Fourier transform infrared (FTIR) spectrometry, the nano‐structured Bi₂ O₃ needles have an average diameter of 158 nm with the lengths in the range of 1–3 μm. CLSI M27‐A2 standard was followed for evaluation of anti‐fungal activity. Bi₂ O₃ nano‐needles show remarkable activity against Candida albicans. It exhibits four time greater activity than bulk Bi₂ O₃ powder and two time greater activity than itraconazole, which makes it a potent anti‐fungal drug.Inspec keywords: bismuth compounds, nanoparticles, X‐ray diffraction, field emission scanning electron microscopy, Fourier transform infrared spectra, drugs, nanomedicine, biomedical materials, nanofabricationOther keywords: nanoneedles, antifungal activity, nanoparticles, X‐ray diffraction, field emission scanning electron microscope, Fourier transform infrared spectrometry, CLSI M27‐A2 standard, Candida albicans, itraconazole, antifungal drug, Bi₂ O₃      

Antibacterial,anti‐inflammatory and antioxidant effects of acetyl‐11‐α‐keto‐β‐boswellic acid mediated silver nanoparticles in experimental murine mastitis

Mastitis is an important economic disease causing production losses in dairy industry. Antibiotics are becoming ineffective in controlling mastitis due to the emergence of resistant strains requiring the development of novel therapeutic agents. In this study, the authors present the phytochemical synthesis of silver nanoparticles (AgNPs) with acetyl‐11‐α‐keto‐β‐boswellic acid and evaluation of their activity in Staphylococcus aureus induced murine mastitis. Boswellic acid mediated AgNP (BANS) were oval, polydispersed (99.8 nm) with an minimum inhibitory concentration of 0.033 µg ml⁻¹ against S. aureus, inhibitory concentration (IC₅₀) of 30.04 µg ml⁻¹ on mouse splenocytes and safe at an in vivo acute oral dose of 3.5 mg kg⁻¹ in mice. Mastitis was induced in lactating mice by inoculating S. aureus (log₁₀ 5.60 cfu) and treated 6 h post‐inoculation with BANS (0.12 mg kg⁻¹, intramammary and intraperitoneal), and cefepime (1 mg kg⁻¹, intraperitoneal). S. aureus inoculated mice showed increased bacterial load, neutrophil infiltration in mammary glands and elevated C‐reactive protein (CRP) in serum. Oxidative stress was also observed with elevated malondialdehyde level, superoxide dismutase (SOD) and catalase (CAT) activities. BANS treatment significantly (P  < 0.05) reduced bacterial load, CRP, SOD, CAT activities and neutrophil infiltration in affected mammary glands. BANS could be a potential therapeutic agent for managing bovine mastitis.Inspec keywords: nanomedicine, nanoparticles, silver, antibacterial activity, drugs, diseases, enzymesOther keywords: antibacterial effects, antiinflammatory effects, antioxidant effects, acetyl‐11‐α‐keto‐β‐boswellic acid, mediated silver nanoparticles, experimental murine mastitis, economic disease, dairy industry, resistant strains, phytochemical synthesis, Staphylococcus aureus, minimum inhibitory concentration, inoculating S. aureus, neutrophil infiltration, mammary glands, elevated C‐reactive protein, superoxide dismutase, catalase, bovine mastitis, Ag     

Catalytic hydrolysis of cellobiose using different acid‐functionalised Fe3 O4 magnetic nanoparticles

The present study demonstrated the preparation of three different acid‐functionalised magnetic nanoparticles (MNPs) and evaluation for their catalytic efficacy in hydrolysis of cellobiose. Initially, iron oxide (Fe₃ O₄)MNPs were synthesised, which further modified by applying silica coating (Fe₃ O₄ ‐MNPs@Si) and functionalised with alkylsulfonic acid (Fe₃ O₄ ‐MNPs@Si@AS), butylcarboxylic acid (Fe₃ O₄ ‐MNPs@Si@BCOOH) and sulphonic acid (Fe₃ O₄ ‐MNPs@Si@SO₃ H) groups. The Fourier transform infrared analysis confirmed the presence of above‐mentioned acid functional groups on MNPs. Similarly, X‐ray diffraction pattern and energy dispersive X‐ray spectroscopy analysis confirmed the crystalline nature and elemental composition of MNPs, respectively. TEM micrographs showed the synthesis of spherical and polydispersed nanoparticles having diameter size in the range of 20–80 nm. Cellobiose hydrolysis was used as a model reaction to evaluate the catalytic efficacy of acid‐functionalised nanoparticles. A maximum 74.8% cellobiose conversion was reported in case of Fe₃ O₄ ‐MNPs@Si@SO₃ H in first cycle of hydrolysis. Moreover, thus used acid‐functionalised MNPs were magnetically separated and reused. In second cycle of hydrolysis, Fe₃ O₄ ‐MNPs@Si@SO₃ H showed 49.8% cellobiose conversion followed by Fe₃ O₄ ‐MNPs@Si@AS (45%) and Fe₃ O₄ ‐MNPs@Si@BCOOH (18.3%). However, similar pattern was reported in case of third cycle of hydrolysis. The proposed approach is considered as rapid and convenient. Moreover, reuse of acid‐functionalised MNPs makes the process economically viable.Inspec keywords: scanning electron microscopy, catalysis, magnetic separation, magnetic particles, silicon compounds, iron compounds, nanomagnetics, coatings, X‐ray chemical analysis, nanoparticles, X‐ray diffraction, nanofabrication, Fourier transform infrared spectra, organic compounds, nanocompositesOther keywords: catalytic efficacy, alkylsulfonic acid, butylcarboxylic acid, energy dispersive X‐ray spectroscopy analysis, spherical polydispersed nanoparticles, cellobiose hydrolysis, acid‐functionalised MNPs, acid functional groups, cellobiose conversion, acid‐functionalised magnetic nanoparticle, silica coating, sulphonic acid, Fourier transform infrared analysis, SEM micrograph, X‐ray diffraction pattern, size 20.0 nm to 80.0 nm, Fe₃ O₄ , Si, SiO₂      

Solvothermal‐assisted green synthesis of hybrid Chi‐Fe3 O4 nanocomposites: a potential antibacterial and antibiofilm material

In this present study, a hybrid Chi‐Fe₃ O₄ was prepared, characterised and evaluated for its antibacterial and antibiofilm potential against Staphylococcus aureus and Staphylococcus marcescens bacterial pathogens. Intense peak around 260 nm in the ultraviolet–visible spectrum specify the formation of magnetite nanoparticles. Spherical‐shaped particles with less agglomeration and particle size distribution of 3.78–46.40 nm were observed using transmission electron microscopy analysis and strong interaction of chitosan with the surface of magnetite nanoparticles was studied using field emission scanning microscopy (FESEM). X‐ray diffraction analysis exhibited the polycrystalline and spinel structure configuration of the nanocomposite. Presence of Fe and O, C and Cl elements were confirmed using energy dispersive X‐ray microanalysis. Fourier transform infrared spectroscopic analysis showed the reduction and formation of Chi‐Fe₃ O₄ nanocomposite. The antibacterial activity by deformation of the bacterial cell walls on treatment with Chi‐Fe₃ O₄ nanocomposite and its interaction was visualised using FESEM and the antibiofilm activity was determined using antibiofilm assay. In conclusion, this present study shows the green synthesis of Chi‐Fe₃ O₄ nanocomposite and evaluation of its antibacterial and antibiofilm potential, proving its significance in medical and biological applicationsInspec keywords: visible spectra, particle size, magnetic particles, nanocomposites, nanoparticles, X‐ray diffraction, nanofabrication, transmission electron microscopy, X‐ray chemical analysis, nanomagnetics, microorganisms, antibacterial activity, iron compounds, ultraviolet spectra, biomedical materials, field emission scanning electron microscopy, Fourier transform infrared spectra, filled polymers, crystal growth from solution, polymer structureOther keywords: potential antibacterial material, antibiofilm potential, magnetite nanoparticles, solvothermal‐assisted green synthesis, hybrid Chi‐Fe₃ O₄ nanocomposites, staphylococcus aureus, staphylococcus marcescens, bacterial pathogens, ultraviolet–visible spectrum, spherical‐shaped particles, particle size, transmission electron microscopy, FESEM, field emission scanning electron microscopy, X‐ray diffraction, spinel structure, polycrystalline structure, energy dispersive X‐ray microanalysis, Fourier transform infrared spectroscopic analysis, deformation, bacterial cell walls, Fe₃ O₄      

Synthesis of ZnO/Fe3 O4 /rGO nanocomposites and evaluation of antibacterial activities towards E. coli and S. aureus

Antibacterial activity of nanoparticles (NPs) and nanocomposites (NCs) has received wide spread attention in biomedical applications. In this direction, the authors prepared zinc oxide (ZnO), iron oxide (Fe₃ O₄), and their composite including reduced graphene oxide (rGO) by hydrothermal method. The structural and microstructural properties of the synthesised NPs and NCs were investigated by XRD, FT‐IR, UV‐Vis, TGA, and TEM analysis. PEG‐coated ZnO and Fe₃ O₄ form in hexagonal wurtzite and inverse spinel structures, respectively. ZnO forms in rod‐shaped (aspect ratio of ∼3) morphology, whereas well‐dispersed spherical‐shaped morphology of ∼10 nm is observed in Fe₃ O₄ NPs. The ZnO/Fe₃ O₄ composite possesses a homogeneous distribution of above two phases and shows a very good colloidal stability in aqueous solvent. These synthesised particles exhibited varying antibacterial activity against gram‐positive strain Staphylococcus aureus (S. aureus) and gram‐negative strain Escherichia coli (E. coli). The nanocomposite exhibits a better cidal effect on E. coli when compared to S. aureus when treated with 1 mg/ml concentration. Further, the addition of rGO has intensified the anti‐bacterial effect to a much higher extent due to synergistic influence of individual components.Inspec keywords: colloids, visible spectra, II‐VI semiconductors, thermal analysis, nanofabrication, X‐ray diffraction, nanoparticles, biomedical materials, wide band gap semiconductors, transmission electron microscopy, ultraviolet spectra, antibacterial activity, nanocomposites, zinc compounds, nanobiotechnology, Fourier transform infrared spectra, graphene compounds, iron compounds, crystal growth from solution, crystal morphologyOther keywords: antibacterial activity, E. coli, biomedical applications, iron oxide, hydrothermal method, structural properties, microstructural properties, PEG‐coated ZnO, hexagonal wurtzite, inverse spinel structures, gram‐positive strain Staphylococcus aureus, S. aureus, gram‐negative strain Escherichia coli, nanocomposites, nanoparticles, XRD, FTIR spectra, UV‐vis spectra, TGA, TEM, rod‐shaped morphology, spherical‐shaped morphology, colloidal stability, cidal effect, ZnO‐Fe₃ O₄ ‐CO     

Functionalisation of Fe3 O4 nanoparticles by 2‐((pyrazol‐4‐yl) methylene) hydrazinecarbothioamide enhances the apoptosis of human breast cancer MCF‐7 cells

Cancer is a major cause of death. Thus, the incidence and mortality rate of cancer is globally important. Regarding vast problems caused by chemotherapy drugs, efforts have progressed to find new anti‐cancer drugs. Pyrazole derivatives are known as components with anti‐cancer properties. In here, Fe₃ O₄ nanoparticles were first functionalized with (3‐chloropropyl) trimethoxysilane, then 2‐((pyrazol‐4‐yl) methylene) hydrazinecarbothioamide (P) was anchored on the surface of magnetic nanoparticles (PL). The synthesized nano‐compounds were characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, Zeta potential, dynamic light scattering, and energy‐dispersive x‐ray spectrometry analyses. The cytotoxicity effect was evaluated using MTT assay, apoptosis test by Flow cytometry, cell cycle analysis, Caspase‐3 activity assay and Hoechst staining on MCF‐7 cell line. The high toxicity for tumor cells and low toxicity on normal cells (MCF10A) was considered as an important feature (selectivity index, 10.9). Based on results, the IC50 for P and PL compounds were 157.80 and 131.84 μM/ml respectively. Moreover, apoptosis inducing, nuclear fragmentation, Caspase 3 activity and induction of cell rest in sub‐G1 and S phases, were also observed. The inhibitory effect of PL was significantly higher than P, which could be due to the high penetrability of Fe₃ O₄ nanoparticles.Inspec keywords: magnetic particles, drugs, nanomedicine, biochemistry, cancer, light scattering, scanning electron microscopy, molecular biophysics, iron compounds, electrokinetic effects, nanofabrication, tumours, X‐ray diffraction, cellular biophysics, nanoparticles, biomedical materials, toxicology, nanomagnetics, Fourier transform infrared spectra, enzymes, X‐ray chemical analysisOther keywords: anticancer properties, Fe₃ O₄ magnetic nanoparticles, (3‐chloropropyl) trimethoxysilane, energy‐dispersive X‐ray spectrometry, cell cycle analysis, MCF‐7 cell line, tumour cells, human breast cancer MCF‐7 cells, mortality rate, pyrazole derivatives, 2‐((pyrazol‐4‐yl) methylene) hydrazinecarbothioamide, chemotherapy drugs, heterocyclic components, nanocompounds, X‐ray diffraction, scanning electron microscopy, Zeta potential, dynamic light scattering, cytotoxicity effect, MTT assay, apoptosis test, caspase‐3 activity assay, Hoechst staining, MCF10A nontumourigenic cells, cell rest induction, nuclear fragmentation, Fe₃ O₄      

Green synthesis of Ce2 O3 NPs and determination of its antioxidant activity

In this study, the authors presented synthesis of ceria nanoparticles (NPs) by the bio‐reduction method and their antioxidative activity. Aqueous extract of Euphorbia (Euphorbia amygdaloides) was used as reducing and stabilising agents. They used aqueous extract of Euphorbia (E. amygdaloides) as reducing and stabilising agent. Ultraviolet–visible (UV–vis) absorption spectroscopy was used to monitor the quantitative formation of ceria NPs. They also addressed the characteristics of the obtained ceria NPs using scanning electron microscopy (SEM), X‐ray diffraction (XRD) and transmitting electron microscope (TEM). The synthesised cerium (III) oxide (Ce₂ O₃) NPs were initially noted through visual colour change from colourless pale yellow cerium (III) to light yellow cerium (IV) and further confirmed the band at 345 nm employing UV–vis spectroscopy. The average diameter of the prepared NPs was about 8.6–10.5 nm. In addition, the synthesised Ce₂ O₃ NPs were tested for antioxidant and anti‐bacterial activities using ferric reducing antioxidant power, cupric reducing antioxidant capacity, ferrous ions chelating activity, superoxide the anion radical scavenging and 2, 2′‐azinobis 3‐ethylbenzothiazol to‐6‐sulphonic acid scavenging activity. It could be concluded that Euphorbia (E. amygdaloides) extract can be used efficiently in the production of potential antioxidant and anti‐bacterial Ce₂ O₃ NPs for commercial applications.Inspec keywords: cerium compounds, nanoparticles, nanofabrication, X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, ultraviolet spectra, visible spectraOther keywords: Ce₂ O₃ , α‐tocopherol, butylated hydroxytoluene, anion radical scavenging, ferrous ions chelating activity, 2, 2''‐azinobis 3‐ethylbenzothiazol to‐6‐sulphonic acid scavenging activity, UV‐vis spectroscopy, light yellow cerium, ultraviolet‐visible absorption spectroscopy, SEM, XRD, green synthesis, transmitting electron microscopy, X‐ray diffraction, scanning electron microscopy, aqueous extract Euphorbia amygdaloides, antioxidative activity, bio‐reduction method, ceria nanoparticles, antioxidant activity     

Fe3 O4 /Ag nanocomposite biosynthesised using Spirulina platensis extract and its enhanced anticancer efficiency

In this work, the authors investigated the apoptotic activities of Fe₃ O₄ /Ag nanocomposite biosynthesised by Spirulina platensis extract against MCF‐7 (human breast cancer cells). The physico‐chemical properties of prepared Fe₃ O₄ /Ag nanocomposite were studied by different spectroscopic methods. To evaluate the in vitro cytotoxic effect, MCF‐7 cells were treated with different concentrations of Fe₃ O₄ /Ag nanocomposite and examined by 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyl‐tetrazolium bromide (MTT) assay. Moreover, apoptotic effects were also studied by Hoechst 33258 staining, caspase 3 activation assays, and annexin V‐fluorescein isothiocyanate (FITC) and propidium iodide staining. Microscopic observations of Fe₃ O₄ /Ag nanocomposites indicated approximately spherical shape and small particles in the size range of about 30–50 nm. The MTT assay result revealed that the Fe₃ O₄ /Ag nanocomposite causes a dose‐dependent cell proliferation reduction in MCF‐7 cells (IC₅₀  = 135 μg/ml). Regarding to the Annexin V/PI staining result, the increase percentage of apoptotic cells (28.09%) was detected as compared to untreated cells. According to the caspase assay, Fe₃ O₄ /Ag nanocomposite enhances caspase 3 level. Furthermore, in vitro anti‐cancer activity of the nanocomposite was performed by Hoechst 33258 staining method. The proposed data suggest that Fe₃ O₄ /Ag nanocomposite may be an effective agent for the inhibition of breast cancer cells at in vitro level.Inspec keywords: nanomedicine, nanocomposites, toxicology, cancer, drug delivery systems, nanofabrication, cellular biophysics, nanoparticlesOther keywords: MCF‐7 cells, 5‐diphenyl‐tetrazolium, apoptotic effects, propidium iodide staining, dose‐dependent cell proliferation reduction, apoptotic cells, untreated cells, nanocomposite, Hoechst 33258 staining method, human breast cancer cells, physico‐chemical properties, spectroscopic methods, in vitro cytotoxic effect, in vitro anticancer activity, biosynthesis, caspase 3 activation assays, annexin V‐fluorescein isothiocyanate, FITC, Fe₃ O₄ ‐Ag     

Development and characterisation of novel Ce‐doped hydroxyapatite–Fe3 O4 nanocomposites and their in vitro biological evaluations for biomedical applications

Hydroxyapatite (HAP: Ca₁₀ (PO₄)₆ (OH)₂) is extensively used in biomedical field because of its biocompatibility, osteoconductivity and non‐toxicity properties. However, HAP exhibits poor mechanical strength and bacterial restriction behavior. To overcome these drawbacks, various metal ions such as Ag⁺, Zn²⁺, Cu²⁺, Ti⁴⁺ and Ce^4+/3+ are incorporated in HAP matrix to increase the mechanical and biological properties. Among these, Cerium (Ce) is selected as antibacterial agent due to its high thermal stability and its applications in dental fillings, bone healing and catheters. Fe₃ O₄ nanoparticles were used in hyperthermia treatment, magnetic fluid recordings and catalysis. In this present study, we have synthesized nanocomposites consisting of 1.25% Ce doped HAP with various concentrations of Fe₃ O₄ NPs as 90:10 (C‐1), 70:30 (C‐2) and 50:50 wt% (C‐3) using ball milling technique. The obtained Ce@HAP‐Fe₃ O₄ nanocomposites were characterized by ATR‐FTIR, XRD, VSM, SEM‐EDAX and TEM analysis. Further, the fabricated Ce@HAP‐Fe₃ O₄ nanocomposites were tested for its antibacterial activity towards Staphylococcus aureus (S. aureus) and Escherichia coli (E.coli), where C‐3 composites exhibit the excellent pathogen inhibition towards E.coli. In addition, the cytotoxicity evaluation on C‐3 nanocomposites by in vitro biocompatibility study using MG‐63 cells shows the prominent viable cell enhancement up to 400µg/mL concentrations.Inspec keywords: nanocomposites, iron compounds, calcium compounds, cerium, mechanical strength, antibacterial activity, biomedical materials, dentistry, bone, nanoparticles, nanofabrication, ball milling, Fourier transform infrared spectra, attenuated total reflection, X‐ray diffraction, magnetometry, scanning electron microscopy, transmission electron microscopy, microorganisms, cellular biophysics, nanomedicineOther keywords: Ce‐doped HAP–Fe3O4 nanocomposite, hydroxyapatite, in vitro biological evaluation, mechanical strength, bacterial restriction behaviour, metal ion, silver ion, zinc ion, copper ion, titanium ion, cerium ion, HAP matrix, antibacterial agent, thermal stability, dental filling, bone healing, catheter, Fe3O4 nanoparticle, hyperthermia treatment, magnetic fluid recording, catalysis, ball milling technique, Fourier transform infrared spectroscopy, attenuated total reflectance spectroscopy, X‐ray diffraction, vibrating sample magnetometry, scanning electron microscopy, SEM‐energy dispersive spectroscopy, transmission electron microscopy, TEM analysis, antibacterial activity, Staphylococcus aureus, Escherichia coli, pathogen inhibition, in vitro biocompatibility, MG‐63 osteoblast cell, cell enhancement, Ca₅ (PO₄)₃ (OH):Ce, Fe₃ O₄      

Green synthesis of magnetically recoverable Fe3 O4 /HZSM‐5 and its Ag nanocomposite using Juglans regia L. leaf extract and their evaluation as catalysts for reduction of organic pollutants

In this work, an Fe₃ O₄ /HZSM‐5 nanocomposite was synthesised in the presence of Juglans regia L. leaf extract. Then, silver nanoparticles (Ag NPs) were immobilised on the surface of prepared magnetically recoverable HZSM‐5 using selected extract for reduction of Ag⁺ ions to Ag NPs and their stabilisation on the surface of the nanocomposite. The reduction of Ag⁺ ions occurs at room temperature within a few minutes. Characterisation of the prepared catalysts has been carried out using fourier transform infrared (FT‐IR), X‐ray diffraction, field‐emission scanning electron microscopy (FESEM), energy‐dispersive spectroscopy, Brunauer–Emmett–Teller method, and a vibrating sample magnetometer. According to the FESEM images of the nanocomposites, the average size of the Ag NPs on the Fe₃ O₄ /HZSM‐5 surface was >70 nm. The Ag/Fe₃ O₄ /HZSM‐5 nanocomposite was a highly active catalyst for the reduction of methyl orange and 4‐nitrophenol in aqueous medium. The utilisation of recycled catalyst for three times in the reduction process does not decrease its activity.Inspec keywords: silver, X‐ray chemical analysis, X‐ray diffraction, nanocomposites, reduction (chemical), nanofabrication, nanoparticles, transmission electron microscopy, catalysts, Fourier transform infrared spectra, iron compounds, field emission scanning electron microscopy, zeolites, magnetometry, particle sizeOther keywords: Ag‐Fe₃ O₄ , temperature 293 K to 298 K, green synthesis, catalyst material, 4‐nitrophenol reduction, methyl orange reduction, particle size, vibrating sample magnetometry, Brunauer–Emmett–Teller method, field‐emission scanning electron microscopy, X‐ray diffraction, FT‐IR spectroscopy, silver nanoparticles, Juglans regia L. leaf extract, organic pollutant reduction, magnetically recoverable nanocomposites, energy‐dispersive spectroscopy     

Magnetic core‐shell Fe3O4@TiO2 nanocomposites for broad spectrum antibacterial applications

The authors have synthesised a core‐shell Fe₃O₄@TiO₂ nanocomposite consisting of Fe₃O₄ as a magnetic core, and TiO₂ as its external shell. The TiO₂ shell is primarily intended for use as a biocompatible and antimicrobial carrier for drug delivery and possible other applications such as wastewater remediation purposes because of its known antibacterial and photocatalytic properties. The magnetic core enables quick and easy concentration and separation of nanoparticles. The magnetite nanoparticles were synthesized by a hydrothermal route using ferric chloride as a single‐source precursor. The magnetite nanoparticles were then coated with titanium dioxide using titanium butoxide as a precursor. The core‐shell Fe₃O₄@TiO₂ nanostructure particles were characterized by XRD, UV spectroscopy, and FT‐IR, TEM, and VSM techniques. The saturation magnetization of Fe₃O₄ nanoparticles was significantly reduced from 74.2 to 13.7 emu/g after the TiO₂ coating. The antibacterial studies of magnetic nanoparticles and the titania‐coated magnetic nanocomposite were carried out against gram+ve, and gram–ve bacteria (Staphylococcus aureus, Pseudomonas aeruginosa, Shigella flexneri , Escherichia coli, and Salmonella typhi) using well diffusion technique. The inhibition zone for E. coli (17 mm after 24 h) was higher than the other bacterial strains; nevertheless, both the uncoated and TiO₂‐coated magnetite nanocomposites showed admirable antibacterial activity against each of the above bacterial strains.     

Evaluation of antifungal effect of iron‐oxide nanoparticles against different Candida species

Iron‐oxide nanoparticles (IONPs) have been widely favoured due to their biodegradable, low cytotoxic effects and having reactive surface which can be altered with biocompatible coatings. Considering various medical applications of IONPs, the authors were encouraged to study whether IONPs could be effective against fungal infections caused by Candida species. In this study, IONPs were characterised by scanning electron microscopy, X‐ray diffraction, Fourier transform infrared spectroscopy and vibrating sample magnetometer. The goal of this study was to evaluate the antifungal activity of IONPs against different Candida spp. compared with fluconazole (FLC). IONPs were spherical with the size of 30–40 nm. The minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) values of IONPs ranged from 62.5 to 500 µg/ml and 500 to 1000 μg/ml, respectively. The MIC and MFC of FLC were in range of 16–128 μg/ml and 64–512 μg/ml, respectively. The growth inhibition value indicated that Candida tropicalis, Candida albicans and Candida glabrata spp. were most susceptible to IONPs. The finding showed that the IONPs possessed antifungal potential against pathogenic Candida spp. and could inhibit the growth of all the tested Candida spp. Further studies, both in vitro and in vivo (including susceptibility, toxicity, Probability of kill (PK) and efficacy studies) are needed to determine whether IONPs are suitable for medicinal purposes.Inspec keywords: iron compounds, nanoparticles, nanomedicine, biomedical materials, microorganisms, cellular biophysics, toxicology, drugs, scanning electron microscopy, X‐ray diffraction, Fourier transform infrared spectraOther keywords: antifungal effect, iron‐oxide nanoparticles, Candida species, biodegradable effects, cytotoxic effects, reactive surface, biocompatible coatings, medical applications, IONP, fungal infections, Candidiasis, immunocompromised hosts, antifungal drugs, resistant organisms, antifungal properties, side effects, chemical drugs, scanning electron microscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometer, antifungal activity, disc diffusion, broth microdilution, minimal inhibitory concentration, minimum fungicidal concentration, Candida tropicalis, Candida Albicans, Candida glabrata, antifungal potential, Fe₃ O₄      

Synthesis,characterisation and potential biomedical applications of magnetic core–shell structures: carbon‐, dextran‐, SiO2 ‐ and ZnO‐coated Fe3 O4 nanoparticles

Due to the strong effect of nanoparticles'' size and surface properties on cellular uptake and bio‐distribution, the selection of coating material for magnetic core–shell nanoparticles (CSNPs) is very important. In this study, the effects of four different biocompatible coating materials on the physical properties of Fe₃ O₄ (magnetite) nanoparticles (NPs) for different biomedical applications are investigated and compared. In this regard, magnetite NPs are prepared by a simple co‐precipitation method. Then, CSNPs including Fe₃ O₄ as a core and carbon, dextran, ZnO (zincite) and SiO₂ (silica) as different shells are synthesised using simple one‐ or two‐step methods. A comprehensive study is carried out on the prepared samples using X‐ray diffraction, vibrating sample magnetometry, transmission electron microscopy and Fourier transform infrared spectroscopy analyses. According to the authors'' findings, it is suggested that carbon‐ and dextran‐coated magnetite NPs with high M _s have great potential in the application of magnetic resonance imaging contrast agents. Moreover, silica‐coated magnetite NPs with high coercivity are potentially suitable candidates for hyperthermia and ZnO‐coated Fe₃ O₄ is potentially suitable for photothermal therapy.Inspec keywords: iron compounds, carbon, silicon compounds, zinc compounds, nanomedicine, biomedical materials, nanofabrication, nanoparticles, magnetic particles, coatings, X‐ray diffraction, magnetometry, transmission electron microscopy, Fourier transform spectra, infrared spectra, biomedical MRI, hyperthermia, radiation therapyOther keywords: biomedical applications, magnetic core‐shell nanoparticles, CSNP, cellular uptake, biodistribution, coating material, biocompatible coating materials, co‐precipitation, dextran, zincite, silica, X‐ray diffraction, vibrating sample magnetometry, transmission electron microscopy, Fourier transform infrared spectroscopy, magnetic resonance imaging contrast agents, hyperthermia, photothermal therapy, SiO₂ ‐Fe₃ O₄ , ZnO‐Fe₃ O₄      

Biological synthesis and characterisation of silver nanoparticles using Pseudomonas geniculata H10 for pharmaceutical activity

In the present study, silver nanoparticles (SNPs) were synthesised for the first time using Pseudomonas geniculata H10 as reducing and stabilising agents. The synthesis of SNPs was the maximum when the culture supernatant was treated with 2.5 mM AgNO₃ at pH 7 and 40°C for 10 h. The SNPs were characterised by field emission scanning electron microscopy‐energy‐dispersive spectroscopy, transmission electron microscopy, dynamic light scattering, X‐ray diffraction and UV–vis spectroscopy. Fourier transform infrared spectroscopy indicated the presence of proteins, suggesting they may have been responsible for the reduction and acted as capping agents. The SNPs displayed 1,1‐diphenyl‐2‐picrylhydrazyl (IC₅₀  = 28.301 μg/ml) and 2,2′‐azinobis‐3‐ethylbenzothiazoline‐6‐sulphonate (IC₅₀  = 27.076 μg/ml) radical scavenging activities. The SNPs exhibited a broad antimicrobial spectrum against several human pathogenic Gram‐positive and Gram‐negative bacteria and Candida albicans. The antimicrobial action of SNPs was due to cell deformation resulting in cytoplasmic leakage and subsequent lysis. The authors’ results indicate P. geniculata H10 could be used to produce antimicrobial SNPs in a facile, non‐toxic, cost‐effective manner, and that these SNPs can be used as effective growth inhibitors in various microorganisms, making them applicable to various biomedical and environmental systems. As far as the authors are aware, this study is the first to describe the potential biomedical applications of SNPs synthesised using P. geniculata.Inspec keywords: X‐ray diffraction, proteins, scanning electron microscopy, enzymes, reduction (chemical), transmission electron microscopy, Fourier transform spectra, field emission electron microscopy, microorganisms, antibacterial activity, pharmaceutical technology, biotechnology, silver compoundsOther keywords: silver nanoparticles, Pseudomonas geniculata H10, field emission scanning electron microscopy‐energy‐dispersive spectroscopy, transmission electron microscopy, 1‐diphenyl‐2‐picrylhydrazyl, antimicrobial SNPs, Fourier transform infrared spectroscopy, Candida albicans, cytoplasmic leakage, microorganisms, biomedical applications, temperature 40.0 degC, time 10.0 hour, AgNO₃      

Cytotoxicity,leishmanicidal, and antioxidant activity of biosynthesised zinc sulphide nanoparticles using Phoenix dactylifera

The synthesis of zinc sulphide nanoparticles (ZnS NPs) using a green approach was explored. The resulting nanoparticles (NPs) were characterised by UV–vis spectroscopy, scanning and transmission electron microscopy, X‐ray diffraction and Fourier transform infrared spectroscopy. The leishmanicidal, cytotoxic and antioxidant activity of the resulting synthesised ZnS NPs (<70 nm) were evaluated against Leishmania major (L. major) promastigotes and amastigotes by MTT assay and using a macrophage model. The ZnS NPs were able to counteract the effects of oxidative metabolites as demonstrated by the oxidant activity. The IC₅₀ value of butylated hydroxyanisole was 26.04 µg/ml as compared with the IC₅₀ for ZnS NPs (90.95 µg/ml). The NPs displayed no cytotoxicity for the murine macrophaghes as the selectivity index (SI) fell into the safety range (SI ≥ 10). These nanomaterials exhibited good antileishmanial activity against the L. major stages that were comparable to that of Glucantime, the drug of choice. The IC₅₀ values of ZnS NPs and Glucantime against amastigotes were 11.59 ± 2.51 and 4.95 ± 2.51 μg/ml, respectively. The IC₅₀ values for ZnS NPs and Glucantime versus promastigote were 29.81 ± 3.15 and 14.75 ± 4.05 μg/ml, respectively. Further investigation is essential to explore the biological effects of ZnS NPs on animal and/or clinical models.Inspec keywords: nanoparticles, nanofabrication, microorganisms, antibacterial activity, ultraviolet spectra, visible spectra, nanobiotechnology, X‐ray diffraction, Fourier transform infrared spectra, zinc compoundsOther keywords: cytotoxicity, leishmanicidal activity, antioxidant activity, biosynthesised zinc sulphide nanoparticles, Phoenix dactylifera, green approach, UV–vis spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, Leishmania major promastigotes, Leishmania major amastigotes, MTT assay, macrophage model, oxidative metabolites, butylated hydroxyanisole, murine macrophaghes, selectivity index, glucantime, ZnS     

Inhibitory effect of magnetic iron‐oxide nanoparticles on the pattern of expression of lanosterol 14α ‐demethylase (ERG11) in fluconazole‐resistant colonising isolate of Candida albicans

Fluconazole‐resistant Candida albicans is a big scary reality. The authors assessed the antifungal effects of magnetic iron‐oxide nanoparticles on fluconazole‐resistant colonising isolate of C. albicans and determined the expression of ERG11 gene, protein sequence similarity and ergosterol content. C. albicans isolates were characterised and fluconazole resistance is recognised using World Health Organization''s WHONET software. Susceptibility testing of magnetic iron‐oxide nanoparticles against fluconazole‐resistant colonising isolate of C. albicans was performed according to Clinical and Laboratory Standards Institute guidelines. The expression patterns of ERG11 and protein sequence similarity were investigated. Ergosterol quantification has been used to gauge the antifungal activity of magnetic iron‐oxide nanoparticles. The findings indicated that 93% of C. albicans isolates were resistant to fluconazole. Magnetic iron‐oxide nanoparticles were presented activity against fluconazole‐resistant colonising isolate of C. albicans with minimum inhibitory concentration at 250–500 µg/ml. The expression level of ERG11 gene was downregulated in fluconazole‐resistant colonising isolate of C. albicans. The results revealed no differences in fluconazole‐resistant colonising isolate of C. albicans by comparison with ERG11 reference sequences. Moreover, significant reduction was noted in ergosterol content. The findings shed a novel light on the application of magnetic iron‐oxide nanoparticles in fighting against resistant C. albicans.Inspec keywords: microorganisms, biochemistry, molecular biophysics, antibacterial activity, iron compounds, proteins, cellular biophysics, nanoparticles, drugs, geneticsOther keywords: albicans isolates, magnetic iron‐oxide nanoparticles, fluconazole‐resistant colonising isolate, fluconazole resistance, ERG11, candida albicans, protein sequence similarity, ergosterol content, WHONET, ergosterol quantification, susceptibility testing, antifungal activity, gene expression     

Novel synthesis of ultra‐fine Sb2 O3 nanocubes using plant extract

In this study, the synthesis of ultra‐fine grade antimony trioxide (Sb₂ O₃) using plant extract for the first time is reported. Antimony chloride was used as a starting material and Dioscorea alata tuber extract was used as a reducing and capping agent. The synthesised nanoparticles were characterised by X‐ray diffraction (XRD), field emission scanning electron microscopy (FE‐SEM), dynamic light scattering (DLS), and Fourier transform infrared spectroscopy. XRD analysis indicates the formation of pure Sb₂ O₃ nanoparticles. The result from FE‐SEM and DLS showed that the particles have a cube‐like morphology and have an average size of 346.4 nm which falls within the range of ultra‐fine grade Sb₂ O₃.Inspec keywords: field emission electron microscopy, scanning electron microscopy, X‐ray diffraction, particle size, nanofabrication, light scattering, transmission electron microscopy, ultraviolet spectra, nanoparticles, antimony compounds, Fourier transform infrared spectraOther keywords: field emission scanning electron microscopy, FE‐SEM, dynamic light scattering, DLS, XRD analysis, antimony chloride, starting material, reducing agent, ultrafine grade antimony trioxide, plant extract, dioscorea alata tuber extract, capping agent, X‐ray diffraction, pure antimony trioxide nanoparticles, cube‐like morphology, Sb₂ O₃      

Synthesis and comparative assessment of antiradical activity,toxicity, and biodistribution of κ‐carrageenan‐capped selenium nanoparticles of different size: in vivo and in vitro study

In the present study, water‐soluble hybrid selenium‐containing nanocomposites have been synthesised via soft oxidation of selenide‐anions, preliminarily generated from elemental bulk‐selenium in the base‐reduction system ‘N₂ H₄ –NaOH’. The nanocomposites obtained consist of Se⁰ NPs (4.6–24.5 nm) stabilised by κ‐carrageenan biocompatible polysaccharide. The structure of these composite nanomaterials has been proven using complementary physical–chemical methods: X‐ray diffraction analysis, transmission electron microscopy, optical spectroscopy, and dynamic light scattering. Optical ranges of ‘emission/excitation’ of aqueous solutions of nanocomposites with Se⁰ NPs of different sizes are established and the most important parameters of their luminescence are determined. For the obtained nanocomposites, the expressed antiradical activity against free radicals 2,2‐diphenyl‐1‐picrylhydrazyl and 2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulphonic acid has been found, the value of which depends on the size of selenium nanoparticles. It is experimentally revealed that all obtained nanocomposites are low toxic (LD₅₀ >2000 mg/kg). It is also found that small selenium nanoparticles (6.8 nm), in contrast to larger nanoparticles (24.5 nm), are accumulated in organisms to significantly increase the level of selenium in the liver, kidneys, and brain (in lesser amounts) of rats.Inspec keywords: nanobiotechnology, free radical reactions, oxidation, enzymes, selenium, solubility, nanofabrication, transmission electron microscopy, X‐ray diffraction, free radicals, reduction (chemical), biomedical materials, nanoparticles, nanomedicine, light scattering, organic‐inorganic hybrid materials, biochemistry, nanocompositesOther keywords: κ‐carrageenan biocompatible polysaccharide, composite nanomaterials, complementary physical–chemical methods, X‐ray diffraction analysis, transmission electron microscopy, optical spectroscopy, dynamic light scattering, optical ranges, expressed antiradical activity, 2,2‐diphenyl‐1‐picrylhydrazyl, 3‐ethylbenzothiazoline‐6‐sulphonic acid, comparative assessment, toxicity, κ‐carrageenan‐capped selenium nanoparticles, water‐soluble hybrid selenium‐containing nanocomposites, soft oxidation, selenide‐anions, elemental bulk‐selenium, base‐reduction system, free radicals, 2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulphonic acid, selenium nanoparticles, nanocomposites, liver, kidneys, brain, luminescence, size 4.6 nm to 24.5 nm