Antibacterial activity of SPIONs versus ferrous and ferric ions under aerobic and anaerobic conditions: a preliminary mechanism study

In modern medicine, major attention has been paid to superparamagnetic iron oxide nanoparticles (SPIONs). Recent studies have shown the antibacterial properties of SPIONs against some Gram‐positive and Gram‐negative bacterial strains. These nanoparticles (NPs) can bind to bacterial membranes via hydrophobic or electrostatic interactions and pass through cell barriers. In this study, the authors evaluated the antibacterial activity of magnetic NPs in comparison with ferrous and ferric ions. The level of reactive oxygen species (ROS) in the treated Staphylococcus aureus and Escherichia coli bacteria were directly measured by fluorometric detection. The results showed that iron ions and SPIONs had significant dependent antimicrobial activities. SPIONs showed greater inhibitory effects than ferrous and ferric ions against the growth of treated bacterial strains under anaerobic conditions, while in aerobic conditions, ferrous showed the strongest antibacterial activity. In anaerobic conditions, they observed the greatest ROS formation and lowest minimum inhibitory concentration in the SPION‐treated group in comparison with the other groups. It seems that the release of iron ions from SPIONs and subsequent activation of ROS pathway are the main antibacterial mechanisms of action. Nevertheless, the greater antibacterial effect of SPIONs in anaerobic conditions represents other mechanisms involved in the antibacterial activity of these NPsInspec keywords: nanomagnetics, antibacterial activity, hydrophobicity, nanoparticles, superparamagnetism, biomedical materials, iron compounds, membranes, nanobiotechnologyOther keywords: ferrous ions, anaerobic conditions, superparamagnetic iron oxide nanoparticles, antibacterial properties, bacterial membranes, electrostatic interactions, bacterial strains, aerobic conditions, SPION‐treated group, antibacterial effect, cell barriers, 2′,7′‐dichlorodihydrofluorescein diacetate, reactive oxygen species, fluorometric detection, Staphylococcus aureus, Escherichia coli     

Evaluation of antibacterial property of hydroxyapatite and zirconium oxide‐modificated magnetic nanoparticles against Staphylococcus aureus and Escherichia coli

In the first section of this research, superparamagnetic nanoparticles (NPs) (Fe₃ O₄) modified with hydroxyapatite (HAP) and zirconium oxide (ZrO₂) and thereby Fe₃ O₄ /HAP and Fe₃ O₄ /ZrO₂ NPs were synthesised through co‐precipitation method. Then Fe₃ O₄ /HAP and Fe₃ O₄ /ZrO₂ NPs characterised with various techniques such as X‐ray photoelectron spectroscopy, X‐ray diffraction, scanning electron microscopy, energy dispersive X‐ray analysis, Brunauer–Emmett–Teller, Fourier transform infrared, and vibrating sample magnetometer. Observed results confirmed the successful synthesis of desired NPs. In the second section, the antibacterial activity of synthesised magnetic NPs (MNPs) was investigated. This investigation performed with multiple microbial cultivations on the two bacteria; Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Obtained results proved that although both MNPs have good antibacterial properties, however, Fe₃ O₄ /HAP NP has greater antibacterial performance than the other. Based on minimum inhibitory concentration and minimum bactericidal concentration evaluations, S. aureus bacteria are more sensitive to both NPs. These nanocomposites combine the advantages of MNP and antibacterial effects, with distinctive merits including easy preparation, high inactivation capacity, and easy isolation from sample solutions by the application of an external magnetic field.Inspec keywords: nanocomposites, X‐ray chemical analysis, microorganisms, magnetic particles, scanning electron microscopy, precipitation (physical chemistry), nanomagnetics, X‐ray diffraction, X‐ray photoelectron spectra, nanoparticles, superparamagnetism, iron compounds, antibacterial activity, biomedical materials, nanomedicine, calcium compounds, nanofabrication, Fourier transform infrared spectra, magnetometers, zirconium compoundsOther keywords: antibacterial effects, antibacterial property, superparamagnetic nanoparticles, X‐ray photoelectron spectroscopy, X‐ray diffraction, X‐ray analysis, antibacterial activity, bactericidal concentration, S. aureus bacteria, Staphylococcus aureus, Escherichia coli, hydroxyapatite, coprecipitation method, scanning electron microscopy, energy dispersive X‐ray analysis, Brunauer‐Emmett‐Teller method, Fourier transform infrared spectroscopy, vibrating sample magnetometer, microbial cultivations, nanocomposites     

Functionalisation of Fe3 O4 nanoparticles by 2‐((pyrazol‐4‐yl) methylene) hydrazinecarbothioamide enhances the apoptosis of human breast cancer MCF‐7 cells

Cancer is a major cause of death. Thus, the incidence and mortality rate of cancer is globally important. Regarding vast problems caused by chemotherapy drugs, efforts have progressed to find new anti‐cancer drugs. Pyrazole derivatives are known as components with anti‐cancer properties. In here, Fe₃ O₄ nanoparticles were first functionalized with (3‐chloropropyl) trimethoxysilane, then 2‐((pyrazol‐4‐yl) methylene) hydrazinecarbothioamide (P) was anchored on the surface of magnetic nanoparticles (PL). The synthesized nano‐compounds were characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, Zeta potential, dynamic light scattering, and energy‐dispersive x‐ray spectrometry analyses. The cytotoxicity effect was evaluated using MTT assay, apoptosis test by Flow cytometry, cell cycle analysis, Caspase‐3 activity assay and Hoechst staining on MCF‐7 cell line. The high toxicity for tumor cells and low toxicity on normal cells (MCF10A) was considered as an important feature (selectivity index, 10.9). Based on results, the IC50 for P and PL compounds were 157.80 and 131.84 μM/ml respectively. Moreover, apoptosis inducing, nuclear fragmentation, Caspase 3 activity and induction of cell rest in sub‐G1 and S phases, were also observed. The inhibitory effect of PL was significantly higher than P, which could be due to the high penetrability of Fe₃ O₄ nanoparticles.Inspec keywords: magnetic particles, drugs, nanomedicine, biochemistry, cancer, light scattering, scanning electron microscopy, molecular biophysics, iron compounds, electrokinetic effects, nanofabrication, tumours, X‐ray diffraction, cellular biophysics, nanoparticles, biomedical materials, toxicology, nanomagnetics, Fourier transform infrared spectra, enzymes, X‐ray chemical analysisOther keywords: anticancer properties, Fe₃ O₄ magnetic nanoparticles, (3‐chloropropyl) trimethoxysilane, energy‐dispersive X‐ray spectrometry, cell cycle analysis, MCF‐7 cell line, tumour cells, human breast cancer MCF‐7 cells, mortality rate, pyrazole derivatives, 2‐((pyrazol‐4‐yl) methylene) hydrazinecarbothioamide, chemotherapy drugs, heterocyclic components, nanocompounds, X‐ray diffraction, scanning electron microscopy, Zeta potential, dynamic light scattering, cytotoxicity effect, MTT assay, apoptosis test, caspase‐3 activity assay, Hoechst staining, MCF10A nontumourigenic cells, cell rest induction, nuclear fragmentation, Fe₃ O₄      

Role of Ribes khorassanicum in the biosynthesis of AgNPs and their antibacterial properties

Silver nanoparticles (AgNPs) have been biosynthesised through the extracts of Ribes khorassanicum fruits, which served as the reducing agents and capping agents. Biosynthesised AgNPs have been found to be ultraviolet–visible (UV–vis) absorption spectra since they have displayed one surface plasmon resonance peak at 438 nm, attesting the formation of spherical NPs. These particles have been characterised by UV–vis, field‐emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, and transmission electron microscopy analysis. The formation of AgNPs at 1.0 mM concentration of AgNO₃ has resulted in NPs that contained mean diameters in a range of 20–40 nm. The green‐synthesised AgNPs have demonstrated high antibacterial effect against pathogenic bacteria (i.e. Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa). Biosynthesising metal NPs through plant extracts can serve as the facile and eco‐friendly alternative for chemical and/or physical methods that are utilised for large‐scale nanometal fabrication in various medical and industrial applications.Inspec keywords: X‐ray diffraction, X‐ray chemical analysis, nanofabrication, surface plasmon resonance, nanoparticles, antibacterial activity, microorganisms, scanning electron microscopy, silver, nanomedicine, visible spectra, ultraviolet spectra, transmission electron microscopy, Fourier transform infrared spectra, field emission scanning electron microscopy, biomedical materialsOther keywords: antibacterial properties, silver nanoparticles, reducing agents, capping agents, surface plasmon resonance peak, spherical NPs, field‐emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, transmission electron microscopy analysis, plant extracts, ultraviolet‐visible absorption spectra, Fourier transform infrared spectroscopy, antibacterial effect, Ribes khorassanicum fruits, Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, surface plasmon resonance, AgNO₃ , Ag     

Synthesis and characterisation of iron oxide nanoparticles conjugated with epidermal growth factor receptor (EGFR) monoclonal antibody as MRI contrast agent for cancer detection

The aim of this study is to synthesise superparamagnetic iron oxide nanoparticles conjugated with anti‐epidermal growth factor receptor monoclonal antibody (ANTI‐EGFR‐SPION) and investigate its physicochemical characterisation and biocompatibility as a targeted magnetic resonance imaging (MRI) contrast agent for the EGFR‐specific detection in EGFR expressing tumour cells. These particles employed biocompatible polymers, poly(D,L‐lactide‐co‐glycolide) (PLGA) and polyethylene glycol aldehyde (PEG‐aldehyde), to increase the half‐life of particles in circulation and reduce their side effects. The Fe₃ O₄ ‐loaded PLGA‐PEG‐aldehyde nanoparticles were prepared by a modified water‐in‐oil‐in‐water double emulsion method. The EGFR antibody was conjugated to the surface of SPIONs using the aldehyde‐amine reaction. Synthesised conjugates (nanoprobes) were characterised using Fourier transform infrared spectrophotometry, dynamic light scattering, transmission electron microscopy images, and vibrating‐sample magnetometery, and the results showed that the conjugation was successful. The mean diameter of nanoprobes was about 25 nm. These nanoprobes exhibited excellent water‐solubility, stability, and biocompatibility. Meanwhile, MR susceptibility test proved that synthesised nanoprobes can be managed for negative contrast enhancement. The results of this study suggested the potential use of these nanoprobes for non‐invasive molecular MRI in EGFR detection in the future.Inspec keywords: solubility, nanomedicine, cancer, spectrophotometry, emulsions, biomedical MRI, nanomagnetics, nanofabrication, tumours, nanoparticles, magnetic particles, molecular biophysics, light scattering, proteins, cellular biophysics, Fourier transform spectra, superparamagnetism, polymers, transmission electron microscopy, iron compoundsOther keywords: physicochemical characterisation, superparamagnetic iron oxide nanoparticles, novel targeting cancer detection, anti‐epidermal growth factor receptor monoclonal antibody, ANTI‐EGFR‐SPION, biocompatibility, targeted magnetic resonance imaging contrast agent, EGFR‐specific detection, EGFR expressing tumour cells, biocompatible polymers, PLGA‐PEG‐aldehyde nanoparticles, modified water‐in‐oil‐in‐water double emulsion method, EGFR antibody, aldehyde‐amine reaction, synthesised conjugates were characterised using Fourier, transmission electron microscopy images, synthesised nanoprobes, EGFR detection, size 25.0 nm, Fe₃ O₄      

Green synthesis of magnetically recoverable Fe3 O4 /HZSM‐5 and its Ag nanocomposite using Juglans regia L. leaf extract and their evaluation as catalysts for reduction of organic pollutants

In this work, an Fe₃ O₄ /HZSM‐5 nanocomposite was synthesised in the presence of Juglans regia L. leaf extract. Then, silver nanoparticles (Ag NPs) were immobilised on the surface of prepared magnetically recoverable HZSM‐5 using selected extract for reduction of Ag⁺ ions to Ag NPs and their stabilisation on the surface of the nanocomposite. The reduction of Ag⁺ ions occurs at room temperature within a few minutes. Characterisation of the prepared catalysts has been carried out using fourier transform infrared (FT‐IR), X‐ray diffraction, field‐emission scanning electron microscopy (FESEM), energy‐dispersive spectroscopy, Brunauer–Emmett–Teller method, and a vibrating sample magnetometer. According to the FESEM images of the nanocomposites, the average size of the Ag NPs on the Fe₃ O₄ /HZSM‐5 surface was >70 nm. The Ag/Fe₃ O₄ /HZSM‐5 nanocomposite was a highly active catalyst for the reduction of methyl orange and 4‐nitrophenol in aqueous medium. The utilisation of recycled catalyst for three times in the reduction process does not decrease its activity.Inspec keywords: silver, X‐ray chemical analysis, X‐ray diffraction, nanocomposites, reduction (chemical), nanofabrication, nanoparticles, transmission electron microscopy, catalysts, Fourier transform infrared spectra, iron compounds, field emission scanning electron microscopy, zeolites, magnetometry, particle sizeOther keywords: Ag‐Fe₃ O₄ , temperature 293 K to 298 K, green synthesis, catalyst material, 4‐nitrophenol reduction, methyl orange reduction, particle size, vibrating sample magnetometry, Brunauer–Emmett–Teller method, field‐emission scanning electron microscopy, X‐ray diffraction, FT‐IR spectroscopy, silver nanoparticles, Juglans regia L. leaf extract, organic pollutant reduction, magnetically recoverable nanocomposites, energy‐dispersive spectroscopy     

Photocatalytic degradation of synthetic dyes using iron (III) oxide nanoparticles (Fe2 O3 ‐Nps) synthesised using Rhizophora mucronata Lam

Biosynthesis of nanoparticles through plant extracts is gaining attention due to the toxic free synthesis process. The environmental engineering applications of many metal oxide nanoparticles have been reported. In this study, iron oxide nanoparticles (Fe₂ O₃ ‐Nps) were synthesised using a simple biosynthetic method using a leaf extract of a mangrove plant Rhizophora mucronata through reduction of 0.01 M ferric chloride. Fe₂ O₃ ‐Np synthesis was revealed by a greenish colour formation with a surface plasmon band observed close to 368 nm. The stable Fe₂ O₃ ‐Np possessed excitation and emission wavelength of 368.0 and 370.5 nm, respectively. The Fourier‐transform infrared spectral analysis revealed the changes in functional groups during formation of Fe₂ O₃ ‐Np. Agglomerations of nanoparticles were observed during scanning electron microscopic analysis and energy‐dispersive X‐ray spectroscopic analysis confirmed the ferric oxide nature. The average particle size of Fe₂ O₃ ‐Np based on dynamic light scattering was 65 nm. Based on transmission electron microscopic analysis, particles were spherical in shape and the crystalline size was confirmed by selected area electron diffraction pattern analysis. The synthesised Fe₂ O₃ ‐Np exhibited a good photodegradation efficiency with a reduction of 83 and 95% of phenol red and crystal violet under irradiation of sunlight and florescent light, respectively. This report is a facile synthesis method for Fe₂ O₃ ‐Np with high photodegradation efficiency.Inspec keywords: photochemistry, dyes, nanofabrication, transmission electron microscopy, scanning electron microscopy, nanoparticles, iron compounds, X‐ray diffraction, catalysts, catalysis, particle size, X‐ray chemical analysis, electron diffraction, Fourier transform infrared spectra, surface plasmonsOther keywords: energy‐dispersive X‐ray spectroscopic analysis, ferric oxide nature, transmission electron microscopic analysis, selected area electron diffraction pattern analysis, iron oxide nanoparticles, plant extracts, toxic free synthesis process, metal oxide nanoparticles, metal nanoparticles, nanofiltration, nanobiocides, Rhizophora mucronata Lam, crystalline size, phenol red, crystal violet, sunlight irradiation, florescent light, scanning electron microscopic analysis, Fourier‐transform infrared spectral analysis, surface plasmon, ferric chloride, leaf extract, nanocatalysts, nanoadsorbents, photocatalytic degradation, synthetic dyes, mangrove plant, water remediation, wastewater pollutant, wavelength 370.5 nm, wavelength 368.0 nm, Fe₂ O₃      

Functional group‐assisted green synthesised superparamagnetic nanoparticles for the rapid removal of hexavalent chromium from aqueous solution

Superparamagnetic nanoparticles (NPs) prepared using the capping agent derived from the Lantana camara fruit extract were used to study the adsorption of chromium ions. Characterisation techniques such as scanning electron microscope, energy‐dispersive X‐ray, Fourier transform infrared spectroscopy, X‐ray diffraction, vibrating sample magnetometer and thermo gravimetric analysis (TGA) were used to study the NP features and adsorption mechanisms. The maximum monolayer adsorption capacity calculated from the Langmuir isotherm was found to be 41 mg/g. The chemical nature of the adsorption is confirmed with the results of Dubinin–Radushkevich model and thermodynamic studies. In addition, thermodynamically favourable and spontaneous adsorption is considered to be a good indication for the removal of metal ions. Out of the kinetic models investigated, the experiments exhibited the best fit to pseudo‐second‐order model, advocating for surface‐based adsorption, involving both physical and chemical interactions. It is also significant to note that 85% of the adsorption occurs in the first 10 min, and hence the selected adsorbent is also claimed for rapid removal of metal ions. The newly synthesised adsorbent hence possesses remarkable properties in terms of simple synthesising technique, low cost, rapid uptake and improved efficiency without generating harmful byproducts.Inspec keywords: superparamagnetism, nanoparticles, magnetic particles, nanofabrication, nanomagnetics, adsorption, chromium, Fourier transform infrared spectra, X‐ray diffraction, X‐ray chemical analysis, magnetometry, thermodynamic propertiesOther keywords: functional group‐assisted green synthesis, superparamagnetic nanoparticles, hexavalent chromium ions, aqueous solution, Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectra, X‐ray diffraction, vibrating sample magnetometry, TGA, Dubinin‐Radushkevich model, thermodynamic model, Langmuir isotherm, monolayer adsorption capacity, surface‐based adsorption, pseudosecond‐order adsorption model, chemical interactions, physical interactions, Cr     

Preparation,structural characterisation and release study of novel hybrid microspheres entrapping nanoselenium,produced by green synthesis

The main goal of this study was to synthesise and characterise different formulations based on alginate and alginate/chitosan microspheres containing nanoselenium (nano‐Se) for controlled delivery applications. Nanosize elemental selenium was produced by using probiotic yogurt bacteria (Lactobacillus casei) in a fermentation procedure. The structural and morphological characterisation of the microspheres was performed by Fourier transform infrared (FTIR), X‐ray diffraction (XRD) and scanning electron microscopy (SEM) analysis. FTIR and XRD pattern indicated that was an effective cross‐linking of selenium nanoparticles within the polymeric matrix in both cases. The SEM images reveal that selenium nanoparticles are mainly exposed on the surface of alginate, in contrast to porous structure of alginate/chitosan/nano‐Se, interconnected in a regular network. This architecture type has a considerable importance in the delivery process, as demonstrated by differential pulse voltammetry. Selenium release from both matrices is pH sensitive. Moreover, chitosan blended with alginate minimise the release of encapsulated selenium, in simulated gastric fluid, and prolong the duration of release in intestinal fluid. The overall effect is the enhancement of total percentage release concomitant with the longer duration of action. The authors’ formulation based on alginate/chitosan is a convenient matrix to be used for selenium delivery in duodenum, caecum and colon.Inspec keywords: organic‐inorganic hybrid materials, nanocomposites, blending, filled polymers, nanoparticles, nanofabrication, nanomedicine, biomedical materials, drug delivery systems, microorganisms, biological organs, selenium, polymer blends, fermentation, scanning electron microscopy, X‐ray diffraction, Fourier transform infrared spectra, surface morphology, nanoporous materials, porosity, pH, voltammetry (chemical analysis), encapsulationOther keywords: structural characterisation, hybrid microspheres entrapping nanoselenium, green synthesis, alginate‐chitosan microspheres, controlled delivery applications, nanosize elemental selenium, probiotic yogurt bacteria, Lactobacillus casei, fermentation, scanning electron microscopy, morphological characterisation, SEM, Fourier transform infrared spectra, FTIR, XRD, X‐ray diffraction, selenium nanoparticles, polymeric matrix, porous structure, differential pulse voltammetry, pH, blending, encapsulated selenium, simulated gastric fluid, intestinal fluid, total percentage release concomitant, duodenum, caecum, colon, Se     

Fabrication and characterisation of super‐paramagnetic responsive PLGA–gelatine–magnetite scaffolds with the unidirectional porous structure: a physicochemical,mechanical, and in vitro evaluation

Architecture and composition of Scaffolds are influential factors in the regeneration of defects. Herein, synthesised iron oxide (magnetite) nanoparticles (MNPs) by co‐precipitation technique were evenly distributed in polylactic‐co‐glycolic acid (PLGA)–gelatine Scaffolds. Hybrid structures were fabricated by freeze‐casting method to the creation of a matrix with tunable pores. The synthesised MNPs were characterised by transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction spectroscopy, and vibrating sample magnetometer analysis. Scanning electron microscopy micrographs of porous Scaffolds confirmed the formation of unidirectional microstructure, so that pore size measurement indicated the orientation of pores in the direction of solvent solidification. The addition of MNPs to the PLGA–gelatine Scaffolds had no particular effect on the morphology of the pores, but reduced slightly pore size distribution. The MNPs contained constructs demonstrated increased mechanical strength, but a reduced absorption capacity and biodegradation ratio. Stability of the MNPs and lack of iron release was the point of strength in this investigation and were determined by atomic absorption spectroscopy. The evolution of rat bone marrow mesenchymal stem cells performance on the hybrid structure under a static magnetic field indicated the potential of super‐paramagnetic constructs for further pre‐clinical and clinical studies in the field of neural regeneration.Inspec keywords: transmission electron microscopy, biodegradable materials, nanofabrication, freezing, mechanical strength, tissue engineering, X‐ray diffraction, cellular biophysics, precipitation (physical chemistry), biomedical materials, iron compounds, porosity, scanning electron microscopy, atomic absorption spectroscopy, gelatin, nanoparticles, porous materials, bone, nanocomposites, Fourier transform infrared spectraOther keywords: unidirectional microstructure, pore size measurement, mechanical strength, atomic absorption spectroscopy, hybrid structure, super‐paramagnetic responsive PLGA–gelatine–magnetite scaffolds, unidirectional porous structure, tissue engineering Scaffolds, co‐precipitation technique, polylactic‐co‐glycolic acid–gelatine Scaffolds, freeze‐casting method, transmission electron microscopy, Fourier‐transform infrared spectroscopy, X‐ray diffraction spectroscopy, scanning electron microscopy micrographs, pore size distribution, absorption capacity, iron oxide nanoparticles, Fe₃ O₄      

Novel synthesis of ultra‐fine Sb2 O3 nanocubes using plant extract

In this study, the synthesis of ultra‐fine grade antimony trioxide (Sb₂ O₃) using plant extract for the first time is reported. Antimony chloride was used as a starting material and Dioscorea alata tuber extract was used as a reducing and capping agent. The synthesised nanoparticles were characterised by X‐ray diffraction (XRD), field emission scanning electron microscopy (FE‐SEM), dynamic light scattering (DLS), and Fourier transform infrared spectroscopy. XRD analysis indicates the formation of pure Sb₂ O₃ nanoparticles. The result from FE‐SEM and DLS showed that the particles have a cube‐like morphology and have an average size of 346.4 nm which falls within the range of ultra‐fine grade Sb₂ O₃.Inspec keywords: field emission electron microscopy, scanning electron microscopy, X‐ray diffraction, particle size, nanofabrication, light scattering, transmission electron microscopy, ultraviolet spectra, nanoparticles, antimony compounds, Fourier transform infrared spectraOther keywords: field emission scanning electron microscopy, FE‐SEM, dynamic light scattering, DLS, XRD analysis, antimony chloride, starting material, reducing agent, ultrafine grade antimony trioxide, plant extract, dioscorea alata tuber extract, capping agent, X‐ray diffraction, pure antimony trioxide nanoparticles, cube‐like morphology, Sb₂ O₃      

Sustainable green synthesis of silver nanoparticles by using Rangoon creeper leaves extract and their spectral analysis and anti‐bacterial studies

The plant‐based biological molecules possess exceptionally controlled assembling properties to make them suitable in the synthesis of metal nanoparticles. In the present study, an efficient simple one‐pot method was employed for the synthesis of silver nanoparticles (SNPs) from the Rangoon creeper (RC) aqueous leaf extract. Biomolecules present in the leaf extract play a significant role as reducing agent as well as capping agent in the formation of RC‐SNPs. The formation of RC‐SNPs was confirmed by using several analytical techniques such as Fourier‐transform infrared spectroscopy and ultraviolet–visible spectrophotometer studies. The presence of a sharp surface plasmon resonance peak at 449 nm showed the formation of RC‐SNPs. X‐ray diffraction analysis showed the crystalline nature of the RC‐SNPs with a face‐centred cubic structure. Elemental analysis of RC‐SNPs was done by using energy‐dispersive X‐ray spectroscopy and X‐ray photoelectron spectroscopy. The morphology of RC‐SNPs was examined by transmission electron microscopy (TEM) in the nano range 12 nm, and thermogravimetric‐differential thermal analysis demonstrated the mechanical strength of RC‐SNPs at various temperatures. The authors’ newly synthesised RC‐SNPs exhibited significant anti‐bacterial activity against Staphylococcus aureus and Escherichia coli. Inspec keywords: silver, nanoparticles, X‐ray photoelectron spectra, antibacterial activity, ultraviolet spectra, microorganisms, X‐ray chemical analysis, differential thermal analysis, X‐ray diffraction, transmission electron microscopy, visible spectra, nanofabrication, surface plasmon resonance, Fourier transform infrared spectra, mechanical strengthOther keywords: silver nanoparticles, ultraviolet–visible spectrophotometry, antibacterial activity, sustainable green synthesis, plant‐based biological molecules, assembling properties, reducing agent, capping agent, Fourier‐transform infrared spectroscopy, surface plasmon resonance, Rangoon creeper aqueous leaf extract, X‐ray diffraction, face‐centred cubic structure, elemental analysis, energy‐dispersive X‐ray spectroscopy, X‐ray photoelectron spectroscopy, transmission electron microscopy, TEM, thermogravimetric‐differential thermal analysis, mechanical strength, Staphylococcus aureus, Escherichia coli, Ag     

Superparamagnetic cobalt ferrite nanoparticles as T 2 contrast agent in MRI: in vitro study

Superparamagnetic cobalt ferrite nanoparticles (CoFe₂ O₄) possess favourite advantages for theranostic applications. Most of previous studies reported that CoFe₂ O₄ magnetic nanoparticles (MNPs) are suitable candidates for induction of hyperthermia and transfection agents for drug delivery. The present study synthesized and investigated the potential use of CoFe₂ O₄ as a contrast agent in magnetic resonance imaging (MRI) by using a conventional MRI system. The CoFe₂ O₄ were synthesized using co‐precipitation method and characterized by TEM, XRD, FTIR, EDX and VSM techniques. Relaxivities r ₁ and r ₂ of CoFe₂ O₄ were then calculated using a 1.5 Tesla clinical magnetic field. The cytotoxicity of CoFe₂ O₄ was evaluated by the MTT assay. Finally, the optimal concentrations of MNPs for MRI uses were calculated through the analysis of T ₂ weighted imaging cell phantoms. The superparamagnetic CoFe2O4 NPs with an average stable size of 10.45 nm were synthesized. Relaxivity r ₁, ₂ calculations resulted in suitable r ₂ and r ₂ / r ₁ with values of 58.6 and 51 that confirmed the size dependency on relaxivity values. The optimal concentration of MNPs for MR image acquisition was calculated as 0.154 mM. Conclusion: CoFe₂ O₄ synthesized in this study could be considered as a suitable T ₂ weighted contrast agent because of its high r ₂ /r ₁ value.Inspec keywords: nanoparticles, phantoms, transmission electron microscopy, superparamagnetism, ferrites, cellular biophysics, precipitation (physical chemistry), magnetisation, cobalt compounds, nanomagnetics, magnetic particles, nanofabrication, biomedical MRI, nanomedicine, X‐ray diffraction, Fourier transform infrared spectra, X‐ray chemical analysis, particle size, medical image processingOther keywords: superparamagnetic cobalt ferrite nanoparticles, T₂ contrast agent, MRI, in vitro study, magnetic resonance imaging, coprecipitation method, transmission electron microscopy, X‐ray diffraction, Fourier‐transform IR spectra, energy dispersive X‐ray analysis, vibrating sample magnetometer, clinical magnetic field, cytotoxicity, MTT assay, T₂ weighted imaging cell phantoms, T₂ weighted contrast agent, stable size, size dependency, relaxivity values, MR image acquisition, magnetic flux density 1.5 T, CoFe₂ O₄      

Integration of Cynodon dactylon and Muraya koenigii plant extracts in amino‐functionalised silica‐coated magnetic nanoparticle as an effective sorbent for the removal of chromium(VI) metal pollutants

Immobilised magnetic nanoparticles are extensively used owing to their superparamagnetic nature, surface interaction, and binding specificity with the appropriate portentous substances. The present research focuses on the development of a portentous, robust carrier, which integrates the silica‐coated amino‐functionalised magnetic nanoparticle (AF‐MnP) with the plant extracts of Cynodon dactylon (L1) and Muraya koenigii (L2) for the stable and enhanced removal of hazardous hexavalent chromium pollutant in the wastewater. Vibrating sample magnetometer (M _s – 45 emu/g) determines the superparamagnetic properties; Fourier‐transform infrared spectroscopy determines the presence of functional groups such as NH₂, Si–O–Si, C=C; high‐resolution transmission electron microscopy, field emission scanning electron microscope and energy‐dispersive X‐ray spectroscopy determine the size of the green adsorbents in the range of 20 nm and the presence of elements such as Fe, N, and Si determines the efficacy of the synthesised silica‐coated AF‐MnP. The AF‐MnP‐L1 shows the maximum adsorption capacity of 34.7 mg/g of sorbent calculated from the Langmuir isotherm model and the process follows pseudo‐second‐order kinetics. After treatment, the adsorbents can be easily separated from the solution in the presence of an external magnetic field and are reused for nine cycles after acid treatment with the minimal loss of adsorption efficiency.     

Synthesis and characterisation of magnetite nanoparticles using gelatin and starch as capping agents

Nanoparticles of magnetite passivated with gelatin and starch were synthesised using a co‐precipitation technique. The nanoparticles were characterised using ultraviolet–visible (UV–vis), dynamic light scattering (DLS), Zeta potential, transmission electron microscope (TEM), X‐ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The UV–vis spectra showed characteristic surface plasmon resonance of magnetite nanoparticles. The DLS results showed the nanoparticles to have average hydrodynamic diameters of 138 ± 2 and 283 ± 21 nm for particles passivated with gelatin and starch, respectively. The stability in a colloidal solution was greater in nanoparticles passivated with gelatin than nanoparticles obtained with starch, as can be seen by their Zeta potential value (−31 ± 2 and −16 ± 0.5 mV, respectively). According to the TEM evaluation, the use of gelatin allowed to obtain nanoparticles with a spherical morphology and an average size of 10 ± 2 nm. However, when using starch the nanoparticles exhibited diverse morphologies with an average size of 25 ± 7 nm. The XRD results confirmed the crystalline structure of the samples, which showed crystallite sizes of 14.90 and 24.43 nm for nanoparticles passivated with gelatin and starch, respectively. FTIR analysis proved the establishment of interactions between functional groups of biopolymers and magnetite nanoparticles.Inspec keywords: crystallites, nanofabrication, ultraviolet spectra, gelatin, surface plasmon resonance, transmission electron microscopy, scanning electron microscopy, visible spectra, X‐ray diffraction, iron compounds, electrokinetic effects, particle size, colloids, nanoparticles, nanomedicine, precipitation (physical chemistry), light scattering, magnetic particles, Fourier transform infrared spectra, nanomagnetics, filled polymers, nanocompositesOther keywords: magnetite nanoparticles, gelatin, starch, characteristic surface plasmon resonance, capping agents, passivation, co‐precipitation technique, ultraviolet–visible spectra, zeta potential value, dynamic light scattering, DLS, transmission electron microscopy, TEM, X‐ray diffraction, XRD, Fourier transform infrared spectroscopy, FTIR, surface plasmon resonance, hydrodynamic diameters, colloidal solution, spherical morphology, crystalline structure, crystallite size, biopolymers, Fe₂ O₃      

Folate encapsulation in PEG‐diamine grafted mesoporous Fe3 O4 nanoparticles for hyperthermia and in vitro assessment

Effective and targeted delivery of the antitumour drugs towards the specific cancer spot is the major motive of drug delivery. In this direction, suitably functionalised magnetic iron oxide nanoparticles (NPs) have been utilised as a theranostic agent for imaging, hyperthermia and drug delivery applications. Herein, the authors reported the preparation of multifunctional polyethyleneglycol‐diamine functionalised mesoporous superparamagnetic iron oxide NPs (SPION) prepared by a facile solvothermal method for biomedical applications. To endow targeting ability towards tumour site, folic acid (FA) is attached to the amine groups which are present on the NPs surface by 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide hydrochloride/N‐hydroxysuccinimide chemistry. FA attached SPION shows good colloidal stability and possesses high drug‐loading efficiency of ∼ 96% owing to its mesoporous nature and the electrostatic attachment of daunosamine (NH₃ ⁺) group of doxorubicin (DOX) towards the negative surface charge of carboxyl and hydroxyl group. The NPs possess superior magnetic properties in result endowed with high hyperthermic ability under alternating magnetic field reaching the hyperthermic temperature of 43°C within 223 s at NP''s concentration of 1 mg/ml. The functionalised NPs possess non‐appreciable toxicity in breast cancer cells (MCF‐7) which is triggered under DOX‐loaded SPION.Inspec keywords: nanoparticles, nanocomposites, mesoporous materials, colloids, biochemistry, nanomagnetics, molecular biophysics, tumours, superparamagnetism, drugs, toxicology, biomedical materials, nanofabrication, hyperthermia, cancer, magnetic particles, cellular biophysics, nanomedicine, iron compounds, drug delivery systems, filled polymers, biological organs, liquid phase depositionOther keywords: NP surface, colloidal stability, drug‐loading efficiency, hydroxyl group, magnetic properties, high hyperthermic ability, magnetic field, DOX‐loaded SPION, folate encapsulation, targeted delivery, antitumour drugs, specific cancer spot, magnetic iron oxide nanoparticles, theranostic agent, drug delivery applications, multifunctional polyethyleneglycol‐diamine, facile solvothermal method, biomedical applications, tumour site, amine groups, mesoporous superparamagnetic nanoparticles, PEG‐diamine grafted mesoporous nanoparticles, 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide hydrochloride‐N‐hydroxysuccinimide chemistry, daunosamine group, carboxyl group, breast cancer cells, temperature 43.0 degC, Fe₃ O₄      

Solvothermal‐assisted green synthesis of hybrid Chi‐Fe3 O4 nanocomposites: a potential antibacterial and antibiofilm material

In this present study, a hybrid Chi‐Fe₃ O₄ was prepared, characterised and evaluated for its antibacterial and antibiofilm potential against Staphylococcus aureus and Staphylococcus marcescens bacterial pathogens. Intense peak around 260 nm in the ultraviolet–visible spectrum specify the formation of magnetite nanoparticles. Spherical‐shaped particles with less agglomeration and particle size distribution of 3.78–46.40 nm were observed using transmission electron microscopy analysis and strong interaction of chitosan with the surface of magnetite nanoparticles was studied using field emission scanning microscopy (FESEM). X‐ray diffraction analysis exhibited the polycrystalline and spinel structure configuration of the nanocomposite. Presence of Fe and O, C and Cl elements were confirmed using energy dispersive X‐ray microanalysis. Fourier transform infrared spectroscopic analysis showed the reduction and formation of Chi‐Fe₃ O₄ nanocomposite. The antibacterial activity by deformation of the bacterial cell walls on treatment with Chi‐Fe₃ O₄ nanocomposite and its interaction was visualised using FESEM and the antibiofilm activity was determined using antibiofilm assay. In conclusion, this present study shows the green synthesis of Chi‐Fe₃ O₄ nanocomposite and evaluation of its antibacterial and antibiofilm potential, proving its significance in medical and biological applicationsInspec keywords: visible spectra, particle size, magnetic particles, nanocomposites, nanoparticles, X‐ray diffraction, nanofabrication, transmission electron microscopy, X‐ray chemical analysis, nanomagnetics, microorganisms, antibacterial activity, iron compounds, ultraviolet spectra, biomedical materials, field emission scanning electron microscopy, Fourier transform infrared spectra, filled polymers, crystal growth from solution, polymer structureOther keywords: potential antibacterial material, antibiofilm potential, magnetite nanoparticles, solvothermal‐assisted green synthesis, hybrid Chi‐Fe₃ O₄ nanocomposites, staphylococcus aureus, staphylococcus marcescens, bacterial pathogens, ultraviolet–visible spectrum, spherical‐shaped particles, particle size, transmission electron microscopy, FESEM, field emission scanning electron microscopy, X‐ray diffraction, spinel structure, polycrystalline structure, energy dispersive X‐ray microanalysis, Fourier transform infrared spectroscopic analysis, deformation, bacterial cell walls, Fe₃ O₄      

Catalytic hydrolysis of cellobiose using different acid‐functionalised Fe3 O4 magnetic nanoparticles

The present study demonstrated the preparation of three different acid‐functionalised magnetic nanoparticles (MNPs) and evaluation for their catalytic efficacy in hydrolysis of cellobiose. Initially, iron oxide (Fe₃ O₄)MNPs were synthesised, which further modified by applying silica coating (Fe₃ O₄ ‐MNPs@Si) and functionalised with alkylsulfonic acid (Fe₃ O₄ ‐MNPs@Si@AS), butylcarboxylic acid (Fe₃ O₄ ‐MNPs@Si@BCOOH) and sulphonic acid (Fe₃ O₄ ‐MNPs@Si@SO₃ H) groups. The Fourier transform infrared analysis confirmed the presence of above‐mentioned acid functional groups on MNPs. Similarly, X‐ray diffraction pattern and energy dispersive X‐ray spectroscopy analysis confirmed the crystalline nature and elemental composition of MNPs, respectively. TEM micrographs showed the synthesis of spherical and polydispersed nanoparticles having diameter size in the range of 20–80 nm. Cellobiose hydrolysis was used as a model reaction to evaluate the catalytic efficacy of acid‐functionalised nanoparticles. A maximum 74.8% cellobiose conversion was reported in case of Fe₃ O₄ ‐MNPs@Si@SO₃ H in first cycle of hydrolysis. Moreover, thus used acid‐functionalised MNPs were magnetically separated and reused. In second cycle of hydrolysis, Fe₃ O₄ ‐MNPs@Si@SO₃ H showed 49.8% cellobiose conversion followed by Fe₃ O₄ ‐MNPs@Si@AS (45%) and Fe₃ O₄ ‐MNPs@Si@BCOOH (18.3%). However, similar pattern was reported in case of third cycle of hydrolysis. The proposed approach is considered as rapid and convenient. Moreover, reuse of acid‐functionalised MNPs makes the process economically viable.Inspec keywords: scanning electron microscopy, catalysis, magnetic separation, magnetic particles, silicon compounds, iron compounds, nanomagnetics, coatings, X‐ray chemical analysis, nanoparticles, X‐ray diffraction, nanofabrication, Fourier transform infrared spectra, organic compounds, nanocompositesOther keywords: catalytic efficacy, alkylsulfonic acid, butylcarboxylic acid, energy dispersive X‐ray spectroscopy analysis, spherical polydispersed nanoparticles, cellobiose hydrolysis, acid‐functionalised MNPs, acid functional groups, cellobiose conversion, acid‐functionalised magnetic nanoparticle, silica coating, sulphonic acid, Fourier transform infrared analysis, SEM micrograph, X‐ray diffraction pattern, size 20.0 nm to 80.0 nm, Fe₃ O₄ , Si, SiO₂      

Antineoplastic and antioxidant potential of phycofabricated silver nanoparticles using microalgae Chlorella minutissima

This study for the first time reports on fresh water microalgae Chlorella minutissima aqueous extract (CmAe) which was utilized for the biogenic synthesis of silver nanoparticles and tested their antineoplastic potential against Liver Hepatocellular Carcinoma (HepG2) cell line. The characteristic colour change of the reaction mixture from greenish yellow to yellowish brown confirmed the synthesis of Chlorella minutissima silver nanoparticles (CmAgNPs). Microscopic analysis revealed CmAgNPs to be spherical‐shaped with particle size ranging from 10 to 30 nm. The carbohydrates and proteins distinctive peaks were observed in Fourier transform infrared spectroscopy (FTIR) spectra which suggested these biomolecules acted as reducing and capping agents. Further, the crystalline nature of CmAgNPs was confirmed by X‐ray diffraction (XRD) analysis. CmAgNPs showed maximum free radical scavenging proving it to be more potent antioxidant agent as compared to CmAe. The mortality rate of HepG2 cells treated with CmAgNPs was found to be 91.8 % at 120 μg/ml with IC₅₀ value 12.42 ± 1.096 μg/ml after 48 h whereas no effect was observed on normal Human Embryonic Kidney (HEK 293) cells. Fluorescent images of the treated HepG2 cells revealed the formation of apoptotic bodies, condensed nuclei and cell shrinkage indicating their effectiveness against the cancer cells.Inspec keywords: silver, nanoparticles, nanomedicine, microorganisms, cellular biophysics, nanofabrication, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, proteins, Fourier transform infrared spectra, molecular biophysics, X‐ray chemical analysis, X‐ray diffraction, kidney, cancer, biomedical materialsOther keywords: antineoplastic potential, antioxidant potential, phycofabricated silver nanoparticle, Chlorella minutissima, freshwater microalgae, aqueous extract, liver hepatocellular carcinoma cell line, CmAgNP synthesis, field emission scanning electron microscopy, high‐resolution transmission electron microscopy, atomic force microscopy, dynamic light scattering, carbohydrate, protein, Fourier transform infrared spectroscopy, biomolecule, energy‐dispersive X‐ray spectroscopy, elemental silver signal, CmAgNP crystalline, X‐ray diffraction analysis, antioxidant agent, HepG2 cell mortality rate, human embryonic kidney, HEK 293 cell, fluorescent image, apoptotic body formation, condensed nuclei, cell shrinkage, cancer cell, antineoplastic agent, Ag     

Synthesised magnetic nano‐zeolite as a mycotoxins binder to reduce the toxicity of aflatoxins,zearalenone, ochratoxin A,and deoxynivalenol in barley

Agricultural commodities, particularly cereals can be contaminated with mycotoxins during the pre‐ and post‐harvest stage. The main goal of this study was to evaluate the efficacy of magnetic zeolite nanocomposite (MZNC) as an adsorbent for the reduction of mycotoxins in barley flour. The MZNC is synthesised using an eco‐friendly and efficient procedure and characterised by zeta potential, field emission scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy. The adsorbent amount that affects the adsorption capacity was optimised. Low amounts of the nanocomposite removed >99% of aflatoxins, 50% of ochratoxin A, 22% of zearalenone, and 1.8% of the deoxynivalenol from the contaminated sample and adsorption by MZNC was better than the natural zeolite; this phenomenon is related to the wide surface of nanocomposites. Results provide new insights into possible future research that could overcome the challenges of using nanotechnology to eliminate mycotoxins from agricultural products. It can be hoped that the presence of cheap and eco‐friendly mycotoxin binders such as the MZNC that is synthesised and utilised in this research will help to produce secure food and feed products.Inspec keywords: toxicology, field emission electron microscopy, zeolites, scanning electron microscopy, adsorption, X‐ray chemical analysis, nanotechnology, nanocomposites, agricultural products, contaminationOther keywords: synthesised magnetic nanozeolite, mycotoxins binder, zearalenone, deoxynivalenol, ochratoxin A, agricultural commodities, cereals, post‐harvest stage, magnetic zeolite nanocomposite, MZNC, barley flour, zeta potential field emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, adsorption capacity, natural zeolite, agricultural products, eco‐friendly mycotoxin binders, aflatoxins, toxicity