Green synthesis of nanosilver‐decorated graphene oxide sheets

A green facile method has been successfully used for the synthesis of graphene oxide sheets decorated with silver nanoparticles (rGO/AgNPs), employing graphite oxide as a precursor of graphene oxide (GO), AgNO₃ as a precursor of Ag nanoparticles (AgNPs), and geranium (Pelargonium graveolens) extract as reducing agent. Synthesis was accomplished using the weight ratios 1:1 and 1:3 GO/Ag, respectively. The synthesised nanocomposites were characterised by scanning electron microscopy, transmission electron microscopy, atomic force microscopy, X‐ray diffraction, UV‐visible spectroscopy, Raman spectroscopy, energy dispersive X‐ray spectroscopy and thermogravimetric analysis. The results show a more uniform and homogeneous distribution of AgNPs on the surface of the GO sheets with the weight ratio 1:1 in comparison with the ratio 1:3. This eco‐friendly method provides a rGO/AgNPs nanocomposite with promising applications, such as surface enhanced Raman scattering, catalysis, biomedical material and antibacterial agent.Inspec keywords: silver, nanoparticles, graphene, nanocomposites, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, X‐ray diffraction, ultraviolet spectra, visible spectra, X‐ray chemical analysis, surface enhanced Raman scattering, catalysis, nanofabricationOther keywords: antibacterial agent, biomedical material, catalysis, surface enhanced Raman scattering, rGO‐AgNP nanocomposite, eco‐friendly method, homogeneous distribution, thermogravimetric analysis, energy dispersive X‐ray spectroscopy, Raman spectroscopy, UV‐visible spectroscopy, X‐ray diffraction, atomic force microscopy, transmission electron microscopy, scanning electron microscopy, nanocomposites, reducing agent, geranium, graphene oxide sheets, graphite oxide, silver nanoparticles, green facile method     

Role of Ribes khorassanicum in the biosynthesis of AgNPs and their antibacterial properties

Silver nanoparticles (AgNPs) have been biosynthesised through the extracts of Ribes khorassanicum fruits, which served as the reducing agents and capping agents. Biosynthesised AgNPs have been found to be ultraviolet–visible (UV–vis) absorption spectra since they have displayed one surface plasmon resonance peak at 438 nm, attesting the formation of spherical NPs. These particles have been characterised by UV–vis, field‐emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, and transmission electron microscopy analysis. The formation of AgNPs at 1.0 mM concentration of AgNO₃ has resulted in NPs that contained mean diameters in a range of 20–40 nm. The green‐synthesised AgNPs have demonstrated high antibacterial effect against pathogenic bacteria (i.e. Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa). Biosynthesising metal NPs through plant extracts can serve as the facile and eco‐friendly alternative for chemical and/or physical methods that are utilised for large‐scale nanometal fabrication in various medical and industrial applications.Inspec keywords: X‐ray diffraction, X‐ray chemical analysis, nanofabrication, surface plasmon resonance, nanoparticles, antibacterial activity, microorganisms, scanning electron microscopy, silver, nanomedicine, visible spectra, ultraviolet spectra, transmission electron microscopy, Fourier transform infrared spectra, field emission scanning electron microscopy, biomedical materialsOther keywords: antibacterial properties, silver nanoparticles, reducing agents, capping agents, surface plasmon resonance peak, spherical NPs, field‐emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, transmission electron microscopy analysis, plant extracts, ultraviolet‐visible absorption spectra, Fourier transform infrared spectroscopy, antibacterial effect, Ribes khorassanicum fruits, Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, surface plasmon resonance, AgNO₃ , Ag     

Green synthesis of silver nanoparticles using Mentha pulegium and investigation of their antibacterial,antifungal and anticancer activity

A simple and eco‐friendly method for efficient synthesis of stable colloidal silver nanoparticles (AgNPs) using Mentha pulegium extracts is described. A series of reactions was conducted using different types and concentrations of plant extract as well as metal ions to optimize the reaction conditions. AgNPs were characterized by using UV–vis spectroscopy, transmission electron microscopy, atomic force microscopy, dynamic light scattering, zetasizer, energy‐dispersive X‐ray spectroscopy (EDAX) and Fourier transform infrared spectroscopy (FTIR). At the optimized conditions, plate shaped AgNPs with zeta potential value of ‐15.7 and plasmon absorption maximum at 450 nm were obtained using high concentration of aqueous extract. Efficient adsorption of organic compounds on the nanoparticles was confirmed by FTIR and EDAX. The biogenic AgNPs displayed promising antibacterial activity on Escherichia coli, Staphylococcus aureus, and Streptococcus pyogenes. The highest antibacterial activity of 25 µg mL‐1 was obtained for all the strains using aqueous extract synthesized AgNPs. The aqueous extract synthesised AgNPs also showed considerable antifungal activity against fluconazole resistant Candida albicans. The cytotoxicity assay revealed considerable anticancer activity of AgNPs on HeLa and MCF‐7 cancer cells. Overall results indicated high potential of M. pulegium extract to synthesis high quality AgNPs for biomedical applications.Inspec keywords: silver, nanoparticles, nanofabrication, botany, antibacterial activity, biomedical materials, nanomedicine, ultraviolet spectra, visible spectra, transmission electron microscopy, atomic force microscopy, X‐ray chemical analysis, Fourier transform infrared spectra, electrokinetic effects, microorganisms, cellular biophysics, cancerOther keywords: antibacterial activity, antifungal activity, anticancer activity, stable colloidal silver nanoparticle, Mentha pulegium, plant extract, UV‐visible spectroscopy, transmission electron microscopy, atomic force microscopy, DLS, zetasizer, energy‐dispersive X‐ray spectroscopy, Fourier transform infrared spectroscopy, methanolic extract, aqueous extract, plate‐shaped silver nanoparticle, zeta potential, plasmon absorption maximum, organic compounds adsorption, biogenic silver nanoparticle, Escherichia coli, Staphylococcus aureus, Streptococcus pyogenes, fluconazole‐resistant Candida albicans, MTT assay, HeLa cancer cell, MCF‐7 cancer cell, Ag     

Biosynthesis of γ ‐Fe2 O3 @CuO core–shell nanoclusters using aqueous extract of Sesbania grandiflora Linn fresh leaves,its characterisation,and antimicrobial activity studies against Staphylococcus aureus strains

The present study reports an eco‐friendly and rapid method for the synthesis of core–shell nanoclusters using the modified reverse micelle method. It is a green synthetic method which uses Sesbania grandiflora Linn extract which acts as a reducing and capping agent. It is observed that this method is very fast and convenient and the nanoclusters are formed with 5–10 min of the reaction time without using harsh conditions. The core–shell nanoclusters so prepared were characterised using UV–Vis spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy. Further, their effective antibacterial activity towards the gram‐positive bacteria Staphylococcus aureus was found to be due to their smaller particle size.Inspec keywords: iron compounds, copper compounds, nanoparticles, particle size, nanofabrication, nanomedicine, biomedical materials, core‐shell nanostructures, antibacterial activity, ultraviolet spectra, visible spectra, microorganisms, reduction (chemical), scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectraOther keywords: biosynthesis, γ‐Fe₂ O₃ ‐CuO core‐shell nanoclusters, aqueous extract, Sesbania grandiflora Linn fresh leaves, antimicrobial activity, Staphylococcus aureus strains, eco‐friendly method, modified reverse micelle method, green synthetic method, reducing agent, capping agent, UV‐visible spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, antibacterial activity, gram‐positive bacteria Staphylococcus aureus, particle size, time 5 min to 10 min, Fe₂ O₃ ‐CuO     

Sunlight induced biosynthesis of silver nanoparticle from the bark extract of Amentotaxus assamica D.K. Ferguson and its antibacterial activity against Escherichia coli and Staphylococcus aureus

Green synthesis of nanoparticles has gained importance due to its eco‐friendly, low toxicity and cost effective nature. This study deals with the biosynthesis of silver nanoparticles (AgNPs) from the bark extract of Amentotaxus assamica. The AgNPs have been synthesised by reducing the silver ions into stable AgNPs using the bark extract of Amentotaxus assamica under the influence of sunlight irradiation. The characterisation of the biosynthesised AgNPs was carried out by UV–vis spectroscopy, X‐ray diffraction analysis (XRD), Fourier transform infrared spectroscopy, scanning electron microscopy (SEM) and energy dispersive X‐ray analysis. The UV–vis spectrum showed a broad peak at 472 nm. Also, the XRD confirmed the crystalline structure of the AgNPs. Moreover, the SEM analysis revealed that the biosynthesised AgNPs were spherical in shape. Also, dynamic light scattering techniques were used to evaluate the size distribution profile of the biosynthesised AgNPs. Furthermore, the biosynthesised AgNPs showed a prominent inhibitory effect against both Escherichia coli (MTCC 111) and Staphylococcus aureus (MTCC 97). Thus the biosynthesis of AgNPs from the bark extract of Amentotaxus assamica is found to eco‐friendly way of producing AgNPs compared to chemical method.Inspec keywords: X‐ray chemical analysis, microorganisms, transmission electron microscopy, nanoparticles, toxicology, scanning electron microscopy, ultraviolet spectra, particle size, Fourier transform spectra, X‐ray diffraction, antibacterial activity, visible spectra, infrared spectra, nanomedicine, silverOther keywords: stable AgNP, biosynthesised AgNP, SEM analysis, sunlight irradiation, silver ions, silver nanoparticle, amentotaxus assamica, biosynthesis, escherichia coli     

Evaluating the effect of green synthesised copper oxide nanoparticles on oxidative stress and mitochondrial function using murine model

Green synthesis of metal nanoparticles (NPs) has now received the attention of researchers due to ease of preparation and its potential to overcome hazards of these chemicals for an eco‐friendly milieu. In this study, copper oxide (CuO) NPs were synthesised via Desmodium gangeticum aqueous root extract and standard chemical method, further characterised by UV–visible spectroscopy, Fourier transform infrared spectroscopy, X‐ray diffraction, Thermogravimetric analysis and scanning electron microscopy. The nephrotoxicity of the NP obtained from two routes were compared and evaluated at subcellular level in Wistar rat, renal proximal epithelial cells (LLC PK1 cell lines) and isolated renal mitochondria. CuO NP synthesised by chemical route showed prominent nephrotoxicity measured via adverse cytotoxicity to LLC PK1 cells, elevated renal oxidative stress and damage to renal tissue (determined by impaired alanine transaminase, aspartate transaminase, urea, uric acid and creatinine in the blood). However, at the level of cell organelle, CuO NP from both routes are non‐toxic to mitochondrial functional activity. The authors’ finding suggests that CuO NP synthesised by chemical route may induce nephrotoxicity, but may be overcome by co‐administration of antioxidants, as it is not mito‐toxic.Inspec keywords: cellular biophysics, scanning electron microscopy, toxicology, nanomedicine, oxidation, nanoparticles, enzymes, blood, visible spectra, X‐ray diffraction, biochemistry, nanofabrication, antibacterial activity, ultraviolet spectra, copper compounds, Fourier transform infrared spectra, molecular biophysics, thermal analysis, biological tissuesOther keywords: green synthesised copper oxide nanoparticles, murine model, metal nanoparticles, chemicals, eco‐friendly milieu, copper oxide NPs, standard chemical method, X‐ray diffraction, scanning electron microscopy, subcellular level, renal proximal epithelial cells, LLC PK1 cell lines, renal mitochondria, renal tissue, cell organelle, mitochondrial functional activity, UV‐visible spectroscopy, Fourier transform infrared spectroscopy, nephrotoxicity, renal oxidative stress, Desmodium gangeticum aqueous root extract, thermogravimetric analysis, Wistar rat, cytotoxicity, impaired alanine transaminase, aspartate transaminase, urea, uric acid, creatinine, blood, CuO     

Green synthesis of CuO nanoparticles loaded on the seashell surface using Rumex crispus seeds extract and its catalytic applications for reduction of dyes

In this study, CuO nanoparticles supported on the seashell (CuO NPs/seashell) was prepared using Rumex crispus seeds extract as a chelating and capping agent. The prepared nanocomposite was characterised by Fourier transform infrared spectroscopy, X‐ray diffraction, field emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy and transmission electron microscopy. The particle size of CuO NPs on the seashell sheets was in the range of 8–60 nm. Catalytic ability of CuO NPs/seashell was investigated for the reduction of 4‐nitrophenol (4‐NP) and Congo red (CR). It was observed that catalyst can be easily recovered and reused several times without any significant loss of catalytic efficiency.Inspec keywords: nanocomposites, nanoparticles, catalysis, dyes, Fourier transform infrared spectra, X‐ray diffraction, field emission electron microscopy, scanning electron microscopy, X‐ray chemical analysis, transmission electron microscopy, particle size, copper compoundsOther keywords: CuO, size 8 nm to 60 nm, Congo red, 4‐nitrophenol, particle size, transmission electron microscopy, energy dispersive X‐ray spectroscopy, field emission scanning electron microscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, nanocomposite, capping agent, chelating agent, dye reduction, catalytic application, Rumex crispus seeds extract, seashell surface, nanoparticles, green synthesis     

Functional group‐assisted green synthesised superparamagnetic nanoparticles for the rapid removal of hexavalent chromium from aqueous solution

Superparamagnetic nanoparticles (NPs) prepared using the capping agent derived from the Lantana camara fruit extract were used to study the adsorption of chromium ions. Characterisation techniques such as scanning electron microscope, energy‐dispersive X‐ray, Fourier transform infrared spectroscopy, X‐ray diffraction, vibrating sample magnetometer and thermo gravimetric analysis (TGA) were used to study the NP features and adsorption mechanisms. The maximum monolayer adsorption capacity calculated from the Langmuir isotherm was found to be 41 mg/g. The chemical nature of the adsorption is confirmed with the results of Dubinin–Radushkevich model and thermodynamic studies. In addition, thermodynamically favourable and spontaneous adsorption is considered to be a good indication for the removal of metal ions. Out of the kinetic models investigated, the experiments exhibited the best fit to pseudo‐second‐order model, advocating for surface‐based adsorption, involving both physical and chemical interactions. It is also significant to note that 85% of the adsorption occurs in the first 10 min, and hence the selected adsorbent is also claimed for rapid removal of metal ions. The newly synthesised adsorbent hence possesses remarkable properties in terms of simple synthesising technique, low cost, rapid uptake and improved efficiency without generating harmful byproducts.Inspec keywords: superparamagnetism, nanoparticles, magnetic particles, nanofabrication, nanomagnetics, adsorption, chromium, Fourier transform infrared spectra, X‐ray diffraction, X‐ray chemical analysis, magnetometry, thermodynamic propertiesOther keywords: functional group‐assisted green synthesis, superparamagnetic nanoparticles, hexavalent chromium ions, aqueous solution, Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectra, X‐ray diffraction, vibrating sample magnetometry, TGA, Dubinin‐Radushkevich model, thermodynamic model, Langmuir isotherm, monolayer adsorption capacity, surface‐based adsorption, pseudosecond‐order adsorption model, chemical interactions, physical interactions, Cr     

Green synthesis,characterisation and biological evaluation of plant‐based silver nanoparticles using Quercus semecarpifolia Smith aqueous leaf extract

The development of reliable and green methods for the fabrication of metallic nanoparticles (NPs) has many advantages in the field of nanotechnology. In this direction, the present work describes an eco‐friendly and cost‐effective protocol for the production of silver NPs (AgNPs) using an aqueous extract of Quercus semecarpifolia leaves. Different techniques were carried out for the characterisation of the synthesised AgNPs. The ultraviolet–visible spectroscopic analysis showed the highest absorbance peak at 430 nm. The particle size and structure were confirmed by scanning electron microscopy as well as transmission electron microscopy (TEM) analysis. From TEM imaging, it was revealed that the formed particles were spherical with an average size of 20–50 nm. The crystalline nature of the NPs was determined by X‐ray powder diffraction patterns. Thermogravimetry and differential thermal analysis were also evaluated by a temperature increment from 100 to 1000°C. Bio‐inspired synthesis of AgNPs was performed for their pharmacological evaluation in relation to the activities of the crude methanolic, n ‐hexane, chloroform, ethyl acetate, and aqueous extracts. Good cytotoxic activity was exhibited by the green‐synthesised AgNPs (77%). Furthermore, the AgNPs were found to exhibit significant antioxidant activity at 300 μg/ml (82%). The AgNPs also exhibited good phytotoxic potential (75%).Inspec keywords: scanning electron microscopy, toxicology, visible spectra, particle size, nanofabrication, nanomedicine, transmission electron microscopy, silver, ultraviolet spectra, differential thermal analysis, nanoparticles, X‐ray diffraction, botany, biochemistry, cellular biophysicsOther keywords: green synthesis, biological evaluation, plant‐based silver nanoparticles, reliable methods, metallic nanoparticles, eco‐friendly cost‐effective protocol, silver NPs, ultraviolet–visible spectroscopic analysis, highest absorbance peak, particle size, structure, transmission electron microscopy analysis, TEM imaging, crystalline nature, X‐ray powder diffraction patterns, differential thermal analysis, pharmacological evaluation, aqueous extracts, good cytotoxic activity, significant antioxidant activity, AgNPs exhibited good phytotoxic potential, bio‐inspired synthesis, Quercus semecarpifolia Smith aqueous leaf extract, scanning electron microscopy, thermogravimetry, crude methanolic, n‐hexane, chloroform, ethyl acetate, phytotoxic potential, haemagglutination activity, size 20.0 nm to 50.0 nm, wavelength 430.0 nm, temperature 100 degC to 1000 degC, Ag     

Antibacterial,anticancer and antioxidant potential of silver nanoparticles engineered using Trigonella foenum‐graecum seed extract

In this study, the authors report a simple and eco‐friendly method for the synthesis of silver nanoparticles (AgNPs) using Trigonella foenum‐graecum (TFG) seed extract. They explored several parameters dictating the biosynthesis of TFG‐AgNPs such as reaction time, temperature, concentration of AgNO₃, and TFG extract amount. Physicochemical characterisation of TFG‐AgNPs was done on dynamic light scattering (DLS), field emission electron microscopy, energy dispersive X‐ray spectroscopy, X‐ray diffraction and Fourier transform infrared spectroscopy. The size determination studies using DLS revealed of TFG‐AgNPs size between 95 and 110 nm. The antibacterial activity was studied against Escherichia coli, Proteus vulgaris, Pseudomonas aeruginosa and Staphylococcus aureus. The biosynthesised TFG‐AgNPs showed remarkable anticancer efficacy against skin cancer cell line, A431 and also exhibited significant antioxidant efficacy.Inspec keywords: antibacterial activity, cancer, biomedical materials, silver, nanofabrication, nanomedicine, nanoparticles, microorganisms, skin, cellular biophysics, biochemistry, light scattering, X‐ray chemical analysis, X‐ray diffraction, Fourier transform infrared spectra, particle sizeOther keywords: antibacterial potential, anticancer potential, antioxidant potential, silver nanoparticles, Trigonella foenum‐graecum seed extract, eco‐friendly method, biosynthesis, reaction time, AgNO₃ concentration, TFG extract amount, physicochemical characterisation, dynamic light scattering, field emission electron microscopy, energy dispersive X‐ray spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, size determination, TFG‐AgNPs size, Escherichia coli, Proteus vulgaris, Pseudomonas aeruginosa, Staphylococcus aureus, skin cancer cell line A431, Ag     

Biogenic gold nanoparticles for reduction of 4‐nitrophenol to 4‐aminophenol: an eco‐friendly bioremediation

The present study investigated the synthesis of gold nanoparticles (AuNPs) using mangrove plant extract from Avicennia marina as bioreductant for eco‐friendly bioremediation of 4‐nitrophenol (4‐NP). The AuNPs synthesised were confirmed by UV spectrum, transmission electron microscopy (TEM), X‐ray diffraction, Fourier transmission infrared spectroscopy (FTIR), dynamic light scattering (DLS), and zeta potential. The AuNPs were found to be spherical in shape with size ranging from 4 to 13 nm, as evident by TEM and DLS. Further, the AuNPs were encapsulated with sodium alginate in the form of gold nano beads and used as heterogeneous catalyst and degrading agent to reduce 4‐NP. This reduction in 4‐NP into 4‐aminophenol was confirmed by UV and FTIR. The aqueous solution of 4‐NP peaked its absorbance at 320 nm, and shifted to 400 nm, with an intense yellow colour, appeared due to formation of 4‐nitrophenolate ion. After the addition of AuNps, the 4‐NP solution became colourless and peaked at 400 nm and reduced to 290 nm corresponding to the formation of 4‐aminophenol. Hence, the present work suggested the AuNPs as the potent, eco‐friendly bionanocomposite catalyst for bioremediation of 4‐NP.Inspec keywords: gold, nanoparticles, nanobiotechnology, nanofabrication, ultraviolet spectra, transmission electron microscopy, X‐ray diffraction, Fourier transform spectra, infrared spectra, electrokinetic effects, catalysts, nanocomposites, biochemistryOther keywords: biogenic gold nanoparticles, 4‐nitrophenol, 4‐aminophenol, eco‐friendly bioremediation, mangrove plant extract, Avicennia marina, bioreductant, UV spectrum, transmission electron microscopy, TEM, X‐ray diffraction, Fourier transmission infrared spectroscopy, FTIR, dynamic light scattering, DLS, zeta potential, degrading agent, 4‐nitrophenolate, bionanocomposite catalyst, size 4 nm to 13 nm, wavelength 400 nm, wavelength 290 nm, Au     

Antibacterial potential of silver nanoparticles biosynthesised using Canarium ovatum leaves extract

Silver nanoparticles (AgNPs) have been extensively used as antibacterial agents, owing to their ease of preparation. In the present study, leaves extract of Canarium ovatum have been employed for the biosynthesis of silver nanoparticles (CO‐AgNPs). CO‐AgNPs were synthesised under very mild, eco‐friendly manner where the plant extract acted both as reducing and capping agent. These AgNPs were synthesised by taking into account several parameters, that included, time of reaction, concentration of AgNO₃, amount of extract and temperature of reaction. The optimisation studies suggested efficient synthesis of CO‐AgNPs at 25°C when 1.5 mM AgNO₃ was reduced with 1:20 ratio of plant extract for 40 min. Size determination studies done on dynamic light scattering and scanning electron microscope suggested of spherical shape nanoparticles of size 119.7 ± 7 nm and 50–80 nm, respectively. Further, characterisations were done by Fourier transform infrared and energy‐dispersive X‐ray spectroscopy to evaluate the functional groups and the purity of CO‐AgNPs. The antibacterial efficacy of CO‐AgNPs was determined against the bacterial strain Pseudomonas aeruginosa. As evident from disc diffusion method studies, CO‐AgNPs remarkably inhibited the growth of the tested microorganism. This study suggested that C. ovatum extract efficiently synthesises CO‐AgNPs with significant antibacterial properties and can be good candidates for therapeutics.Inspec keywords: antibacterial activity, nanoparticles, silver, nanofabrication, particle size, light scattering, scanning electron microscopy, Fourier transform infrared spectra, X‐ray chemical analysis, microorganisms, biomedical materials, nanomedicineOther keywords: antibacterial potential, silver nanoparticles, biosynthesis, Canarium ovatum leave extract, plant extract, reducing agent, capping agent, antibacterial agents, reaction time, reaction temperature, dynamic light scattering, scanning electron microscopy, spherical shape nanoparticles, Fourier transform infrared spectroscopy, functional groups, bacterial strain Pseudomonas aeruginosa, disc diffusion method, microorganism, energy‐dispersive X‐ray spectroscopy, temperature 25 degC, time 40 min, Ag     

Synthesis of gold nanoparticles by cotton peels aqueous extract and their catalytic efficiency for the degradation of dyes and antioxidant activity

In this study, the authors synthesised gold nanoparticles (Au NPs) by a green approach using an aqueous extract of empty cotton boll peels (ECBPs) which was rapid, simple and inexpensive eco‐friendly method compared to chemical and physical methods. The ECBP aqueous extract played a vital role in the reduction of Au⁺³ ions into Au NPs which was further confirmed by analytical characterisation. The phase purity and crystallinity of Au NPs were confirmed by X‐ray diffraction analysis. The characteristic functional groups of synthesised Au NPs were identified by Fourier transform infrared analysis. The surface morphology and topography of Au NPs were studied by scanning electron microscopy and transmission electron microscopy analysis. Size with dispersion stability of Au NPs was determined by dynamic light scattering and zeta potential studies. In this study, the authors performed a catalytic activity of Au NPs using different pollutant organic dyes such as methylene blue and methyl orange. It also showed good antioxidant activity compared to standard ascorbic acid by using the standard 1,1‐diphenyl‐2‐picryl‐hydrazil method. Hence, this study concluded that ECBP mediated Au NPs could act as a promising material for degradation of dyes and antioxidant activity.Inspec keywords: gold, dyes, nanoparticles, nanofabrication, X‐ray diffraction, Fourier transform infrared spectra, surface morphology, surface topography, scanning electron microscopy, transmission electron microscopy, electrokinetic effectsOther keywords: gold nanoparticles, cotton peels aqueous extract, catalytic efficiency, antioxidant activity, green approach, empty cotton boll peels, analytical characterisation, phase purity, crystallinity, X‐ray diffraction, functional groups, Fourier transform infrared analysis, surface morphology, surface topography, scanning electron microscopy, transmission electron microscopy, dispersion stability, dynamic light scattering, zeta potential, pollutant organic dyes, methylene blue, methyl orange, Au     

Magnetically responsive,sorafenib loaded alginate microspheres for hepatocellular carcinoma treatment

This study aimed to develop sorafenib loaded magnetic microspheres for the treatment of hepatocellular carcinoma. To achieve this goal, superparamagnetic iron oxide nanoparticles (SPIONs) were synthesised and encapsulated in alginate microspheres together with an antineoplastic agent, sorafenib. In the study, firstly SPIONs were synthesised and characterised by dynamic light scattering, energy‐dispersive X‐ray spectroscopy, and scanning electron microscopy. Then, alginate‐SPIONs microspheres were developed, and further characterised by electron spin resonance spectrometer and vibrating sample magnetometer. Besides the magnetic properties of SPIONs, alginate microspheres with SPIONs were also found to have magnetic properties. The potential use of microspheres in hyperthermia treatment was then investigated and an increase of about 4°C in the environment was found out. Drug release studies and cytotoxicity tests were performed after sorafenib was encapsulated into the magnetic microspheres. According to release studies, sorafenib has been released from microspheres for 8 h. Cytotoxicity tests showed that alginate‐SPION‐sorafenib microspheres were highly effective against cancerous cells and promising for cancer therapy.Inspec keywords: drug delivery systems, drugs, nanofabrication, magnetic particles, iron compounds, scanning electron microscopy, hyperthermia, biomedical materials, encapsulation, nanoparticles, light scattering, nanomagnetics, cellular biophysics, toxicology, cancer, nanomedicine, superparamagnetism, nanocomposites, magnetometry, paramagnetic resonance, X‐ray chemical analysisOther keywords: sorafenib loaded alginate microspheres, hepatocellular carcinoma treatment, sorafenib loaded magnetic microspheres, superparamagnetic iron oxide nanoparticles, dynamic light scattering, energy‐dispersive X‐ray spectroscopy, scanning electron microscopy, electron spin resonance spectrometer, vibrating sample magnetometer, hyperthermia treatment, drug release, alginate‐SPION‐sorafenib microspheres, antineoplastic agent, cytotoxicity tests, cancerous cells, time 8.0 hour, Fe₃ O₄      

Biosynthesis of the CuO nanoparticles using Euphorbia Chamaesyce leaf extract and investigation of their catalytic activity for the reduction of 4‐nitrophenol

Through this study an eco‐friendly, simple, efficient, cheap and biocompatible approach to the biosynthesis and stabilisation of CuO nanoparticles (NPs) using the Euphorbia Chamaesyce leaf extract is presented. The CuO NPs were monitored and characterised by field emission scanning electron microscopy, energy dispersive X‐ray spectroscopy, Fourier transformed infrared spectroscopy, transmission electron microscope and UV‐visible spectroscopy. The biosynthesised CuO NPs showed good catalytic activity for the reduction of 4‐nitrophenol (4‐NP) in water during 180 s and reused 4 times without considerable loss of activity.Inspec keywords: copper compounds, nanoparticles, nanofabrication, catalysis, reduction (chemical), field emission electron microscopy, X‐ray chemical analysis, Fourier transform infrared spectra, transmission electron microscopy, ultraviolet spectra, visible spectraOther keywords: biosynthesis, CuO nanoparticles, Euphorbia Chamaesyce leaf extract, catalytic activity, 4‐nitrophenol reduction, nanoparticle stabilisation, field emission scanning electron microscopy, energy dispersive X‐ray spectroscopy, Fourier transformed infrared spectroscopy, transmission electron microscope, UV‐visible spectroscopy, CuO     

Green synthesis of magnetically recoverable Fe3 O4 /HZSM‐5 and its Ag nanocomposite using Juglans regia L. leaf extract and their evaluation as catalysts for reduction of organic pollutants

In this work, an Fe₃ O₄ /HZSM‐5 nanocomposite was synthesised in the presence of Juglans regia L. leaf extract. Then, silver nanoparticles (Ag NPs) were immobilised on the surface of prepared magnetically recoverable HZSM‐5 using selected extract for reduction of Ag⁺ ions to Ag NPs and their stabilisation on the surface of the nanocomposite. The reduction of Ag⁺ ions occurs at room temperature within a few minutes. Characterisation of the prepared catalysts has been carried out using fourier transform infrared (FT‐IR), X‐ray diffraction, field‐emission scanning electron microscopy (FESEM), energy‐dispersive spectroscopy, Brunauer–Emmett–Teller method, and a vibrating sample magnetometer. According to the FESEM images of the nanocomposites, the average size of the Ag NPs on the Fe₃ O₄ /HZSM‐5 surface was >70 nm. The Ag/Fe₃ O₄ /HZSM‐5 nanocomposite was a highly active catalyst for the reduction of methyl orange and 4‐nitrophenol in aqueous medium. The utilisation of recycled catalyst for three times in the reduction process does not decrease its activity.Inspec keywords: silver, X‐ray chemical analysis, X‐ray diffraction, nanocomposites, reduction (chemical), nanofabrication, nanoparticles, transmission electron microscopy, catalysts, Fourier transform infrared spectra, iron compounds, field emission scanning electron microscopy, zeolites, magnetometry, particle sizeOther keywords: Ag‐Fe₃ O₄ , temperature 293 K to 298 K, green synthesis, catalyst material, 4‐nitrophenol reduction, methyl orange reduction, particle size, vibrating sample magnetometry, Brunauer–Emmett–Teller method, field‐emission scanning electron microscopy, X‐ray diffraction, FT‐IR spectroscopy, silver nanoparticles, Juglans regia L. leaf extract, organic pollutant reduction, magnetically recoverable nanocomposites, energy‐dispersive spectroscopy     

Electrophoretic deposition of hydroxyapatite‐shrimp crusts nanocomposite thin films for bone implant studies

Hydroxyapatite‐shrimp crusts nanocomposite thin films were deposited on titanium substrates by electrophoretic technique, under different preparation conditions, for bone implant applications. Fourier transform infrared spectrometer, atomic force microscope, X‐ray diffraction (XRD), optical microscope, and scanning electron microscope were employed to characterise the synthesised films. Vickers’ micro‐hardness measurements revealed a value of 502 HV for the hydroxyapatite films and 314.55 HV for the nanocomposite films. XRD results confirmed the polycrystalline nature of the hydroxyapatite and hydroxyapatite‐shrimp nanocomposite films. The in‐vitro bioactivity test of the synthesised films in simulated body fluid showed very low dissolution rate. Antibacterial activity of synthesised films was investigated against E. coli bacteria.Inspec keywords: electrophoretic coating techniques, thin films, nanocomposites, antibacterial activity, bone, prosthetics, nanomedicine, calcium compounds, bioceramics, nanofabrication, Fourier transform infrared spectra, atomic force microscopy, X‐ray diffraction, optical microscopy, scanning electron microscopy, Vickers hardness, microhardness, microorganisms, dissolvingOther keywords: Ti, Ca₁₀ (PO₄)₆ (OH)₂ , E. coli bacteria, antibacterial activity, dissolution rate, simulated body fluid, in‐vitro bioactivity test, polycrystalline nature, Vickers microhardness measurements, XRD, scanning electron microscopy, optical microscopy, X‐ray diffraction, atomic force microscopy, Fourier transform infrared spectrometer, bone implant applications, titanium substrates, hydroxyapatite‐shrimp crust nanocomposite thin films, electrophoretic deposition     

Biosynthesis of reusable and recyclable CuO@Magnetite@Hen Bone NCs and its antioxidant and antibacterial activities: a highly stable magnetically nanocatalyst for excellent reduction of organic dyes and adsorption of polycyclic aromatic hydrocarbons

For the first time, through a fast, eco‐friendly and economic method, the aqueous extract of the leaf of Euphorbia corollate was used to the green synthesis of the highly stable CuO@Magnetite@Hen Bone nanocomposites (NCs) as a potent antioxidant and antibacterial agent against Pseudomonas aureus, Staphylococcus aureus, Escherichia coli and Klebsiella pneumoniae pathogenic bacteria. The biosynthesised NCs were identified using the scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy, elemental mapping, X‐ray diffraction (XRD), Fourier transforms infrared spectroscopy and UV–vis analytical techniques. Also, the radical scavenging activity using (2,2‐diphenyl‐1‐picrylhydrazyl) method was used to evaluate the antioxidant activity of the NCs. The stability of nanocatalyst was monitored using the XRD and SEM analyses after 30 days from its synthesis. Furthermore, its excellent catalytic activity, recycling stability, and high substrate applicability were demonstrated to the adsorption of the polycyclic aromatic hydrocarbons of the light crude oil from Shiwashok oil fields and destruction of methylene blue and methyl orange as harmful organic dyes at ambient temperature using UV–vis spectroscopy. Moreover, the green CuO@Magnetite@Hen Bone NCs were recovered and reused several times without considerable loss of its catalytic activity.Inspec keywords: nanobiotechnology, X‐ray diffraction, infrared spectra, catalysis, crude oil, Fourier transform spectra, ultraviolet spectra, scanning electron microscopy, dyes, catalysts, photochemistry, iron compounds, X‐ray chemical analysis, antibacterial activity, adsorption, visible spectra, microorganisms, organic compounds, reduction (chemical), nanomedicine, toxicology, recycling, chemical industryOther keywords: antioxidant activity, XRD, SEM analyses, recycling stability, polycyclic aromatic hydrocarbons, harmful organic dyes, UV–vis spectroscopy, green CuO@Magnetite@Hen Bone NCs, reusable CuO@Magnetite@Hen Bone NCs, recyclable CuO@Magnetite@Hen Bone NCs, antioxidant activities, antibacterial activities, highly stable magnetically nanocatalyst, eco‐friendly method, economic method, euphorbia corollate, green synthesis, CuO@Magnetite@Hen Bone nanocomposites, antibacterial agent, pseudomonas aureus, staphylococcus aureus, escherichia coli, klebsiella pneumoniae pathogenic bacteria, biosynthesised NCs, X‐ray spectroscopy, X‐ray diffraction, radical scavenging activity, antioxidant agent, 2,2‐diphenyl‐1‐picrylhydrazyl, catalytic activity, organic dye reduction, light crude oil, CuO     

Facile synthesis of mesoporous alumina using hexadecyltrimethylammonium bromide (HTAB) as template: simplified sol‐gel approach

Herein the authors present the synthesis of surface functionalised mesoporous alumina (MeAl) for textural characterisation by a simplified sol–gel method obtained by using hexadecyltrimethylammonium bromide as a template. Etoricoxib (ETOX) was used as a model drug for the study. Alumina supported mesoporous material containing drug was characterised using instrumental technique namely Brunauer–Emmett–Teller surface area, Fourier transform‐infrared, differential scanning calorimetry, transmission electron microscopy, X‐ray diffraction, and field emission scanning electron microscopy. Diffusion study using a dialysis bag method used to check the release pattern of ETOX‐loaded‐MeAl. Results of characterisation study revealed the successful surface functionalisation of the drug on nanocomposite. The IC₅₀ value obtained from cell viability study demonstrated the non‐toxic behaviour of synthesised drug‐loaded mesoporous alumina up to the tested concentration range. The present work has demonstrated that synthesised MeAl showed excellent stability with an expanded surface area suitable for carrier material for drug delivery system.Inspec keywords: Fourier transform spectra, adsorption, biomedical materials, silicon compounds, drug delivery systems, X‐ray diffraction, alumina, differential scanning calorimetry, nanocomposites, field emission electron microscopy, nanofabrication, nanomedicine, mesoporous materials, transmission electron microscopy, sol‐gel processing, scanning electron microscopyOther keywords: ETOX‐loaded‐MeAl, successful surface functionalisation, synthesised drug‐loaded mesoporous alumina, synthesised MeAl, expanded surface area, drug delivery system, hexadecyltrimethylammonium bromide, sol‐gel approach, surface functionalised mesoporous alumina, simplified sol–gel method, mesoporous material containing drug, Brunauer–Emmett–Teller surface area, Fourier transform‐infrared, differential scanning calorimetry, transmission electron microscopy, X‐ray diffraction, field emission scanning electron microscopy, dialysis bag method     

Facile phyto‐mediated synthesis of silver nanoparticles using Chinese winter jujube (Ziziphus jujuba Mill. cv. Dongzao) extract and their antibacterial/catalytic properties

The aqueous extract of Chinese winter jujube (Ziziphus jujuba Mill. cv. Dongzao) was used as reducing and capping agents for the synthesis of silver nanoparticles (AgNPs) for the first time. The resulting AgNPs were characterised by UV/Visible (UV–Vis) spectroscopy, atomic force microscope, transmission electron microscopy, selected area electron diffraction, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray and Fourier transform infrared spectroscopy (FTIR). The colloidal solution of AgNPs gave a maximum UV–Vis absorbance at 446 nm. The synthesised nanoparticles were almost in the spherical shapes with an average size of 11.5 ± 4. 8 nm. FTIR spectra were applied to identify the functional groups which were possibly responsible for the conversion of metal ions into nanoparticles. The results showed that the prepared AgNPs were coated with the biomolecules in the extract. The biosynthesised AgNPs showed a remarkable catalytic activity at room temperature, and they also showed good antibacterial properties against Escherichia coli and Staphylococcus aureus.Inspec keywords: silver, nanoparticles, nanofabrication, antibacterial activity, biomedical materials, nanobiotechnology, scanning electron microscopy, X‐ray diffraction, transmission electron microscopy, ultraviolet spectra, visible spectra, X‐ray chemical analysis, Fourier transform infrared spectra, catalysisOther keywords: wavelength 446 nm, temperature 293 K to 298 K, Ag, Escherichia coli, Staphylococcus aureus, biomolecules, catalytic activity, metal ions, colloidal solution, FTIR spectra, UV‐vis absorbance, TEM, SEM, XRD, Fourier transform infrared spectroscopy, energy‐dispersive X‐ray spectroscopy, scanning electron microscopy, X‐ray diffraction, selected area electron diffraction, transmission electron microscopy, atomic force microscopy, UV‐visible spectroscopy, catalytic properties, antibacterial properties, Chinese winter jujube extract, silver nanoparticles, facile phyto‐mediated synthesis