Integration of Cynodon dactylon and Muraya koenigii plant extracts in amino‐functionalised silica‐coated magnetic nanoparticle as an effective sorbent for the removal of chromium(VI) metal pollutants

Immobilised magnetic nanoparticles are extensively used owing to their superparamagnetic nature, surface interaction, and binding specificity with the appropriate portentous substances. The present research focuses on the development of a portentous, robust carrier, which integrates the silica‐coated amino‐functionalised magnetic nanoparticle (AF‐MnP) with the plant extracts of Cynodon dactylon (L1) and Muraya koenigii (L2) for the stable and enhanced removal of hazardous hexavalent chromium pollutant in the wastewater. Vibrating sample magnetometer (M _s – 45 emu/g) determines the superparamagnetic properties; Fourier‐transform infrared spectroscopy determines the presence of functional groups such as NH₂, Si–O–Si, C=C; high‐resolution transmission electron microscopy, field emission scanning electron microscope and energy‐dispersive X‐ray spectroscopy determine the size of the green adsorbents in the range of 20 nm and the presence of elements such as Fe, N, and Si determines the efficacy of the synthesised silica‐coated AF‐MnP. The AF‐MnP‐L1 shows the maximum adsorption capacity of 34.7 mg/g of sorbent calculated from the Langmuir isotherm model and the process follows pseudo‐second‐order kinetics. After treatment, the adsorbents can be easily separated from the solution in the presence of an external magnetic field and are reused for nine cycles after acid treatment with the minimal loss of adsorption efficiency.     

Functional group‐assisted green synthesised superparamagnetic nanoparticles for the rapid removal of hexavalent chromium from aqueous solution

Superparamagnetic nanoparticles (NPs) prepared using the capping agent derived from the Lantana camara fruit extract were used to study the adsorption of chromium ions. Characterisation techniques such as scanning electron microscope, energy‐dispersive X‐ray, Fourier transform infrared spectroscopy, X‐ray diffraction, vibrating sample magnetometer and thermo gravimetric analysis (TGA) were used to study the NP features and adsorption mechanisms. The maximum monolayer adsorption capacity calculated from the Langmuir isotherm was found to be 41 mg/g. The chemical nature of the adsorption is confirmed with the results of Dubinin–Radushkevich model and thermodynamic studies. In addition, thermodynamically favourable and spontaneous adsorption is considered to be a good indication for the removal of metal ions. Out of the kinetic models investigated, the experiments exhibited the best fit to pseudo‐second‐order model, advocating for surface‐based adsorption, involving both physical and chemical interactions. It is also significant to note that 85% of the adsorption occurs in the first 10 min, and hence the selected adsorbent is also claimed for rapid removal of metal ions. The newly synthesised adsorbent hence possesses remarkable properties in terms of simple synthesising technique, low cost, rapid uptake and improved efficiency without generating harmful byproducts.Inspec keywords: superparamagnetism, nanoparticles, magnetic particles, nanofabrication, nanomagnetics, adsorption, chromium, Fourier transform infrared spectra, X‐ray diffraction, X‐ray chemical analysis, magnetometry, thermodynamic propertiesOther keywords: functional group‐assisted green synthesis, superparamagnetic nanoparticles, hexavalent chromium ions, aqueous solution, Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectra, X‐ray diffraction, vibrating sample magnetometry, TGA, Dubinin‐Radushkevich model, thermodynamic model, Langmuir isotherm, monolayer adsorption capacity, surface‐based adsorption, pseudosecond‐order adsorption model, chemical interactions, physical interactions, Cr     

Green synthesis of TiO2 nanoparticles prepared from Phyllanthus niruri leaf extract for dye adsorption and their isotherm and kinetic studies

Herein, the green synthesis of TiO₂ nanoparticles using Phyllanthus niruri leaf extract was accomplished by the sol‐gel method. The structure and particle size of the synthesised TiO₂ nanoparticles were characterised by X‐ray diffraction (XRD) analysis and the size was found to be 20 nm. The Fourier‐transform infrared spectra determined the existence of carboxyl and hydroxyl functional groups. The images from SEM analysis recommended a porous and heterogeneous surface. The methyl orange (MO) dye removal was examined using different parameters such as pH, time, dose, temperature and dye concentration. Maximum dye elimination percentage was achieved at pH 6.0 and 0.02 g as the optimum adsorbent dose. The kinetic analysis suggested that the pseudo‐second‐order kinetic model finely defines adsorption dynamics. Langmuir adsorption isotherm studies revealed endothermic monolayer adsorption of the methyl Orange dye. The negative value of ∆G° and positive value of ∆H° showed the spontaneous and endothermic adsorption method.     

Surface adsorption of poisonous Pb(II) ions from water using chitosan functionalised magnetic nanoparticles

In this study, chitosan functionalised magnetic nano‐particles (CMNP) was synthesised and utilised as an effective adsorbent for the removal of Pb(II) ions from aqueous solution. The experimental studies reveal that adsorbent material has finer adsorption capacity for the removal of heavy metal ions. Parameters affecting the adsorption of Pb(II) ions on CMNP, such as initial Pb(II) ion concentration, contact time, solution pH, adsorbent dosage and temperature were studied. The adsorption equilibrium study showed that present adsorption system followed a Freundlich isotherm model. The experimental kinetic studies on the adsorption of Pb(II) ions exhibited that present adsorption process best obeyed with pseudo‐first order kinetics. The maximum monolayer adsorption capacity of CMNP for the removal of Pb(II) ions was found to be 498.6 mg g⁻¹. The characterisation of present adsorbent material was done by FTIR, energy disperse X‐ray analysis and vibrating sample magnetometer studies. Thermodynamic parameters such as Gibbs free energy (ΔG °), enthalpy (ΔH °) and entropy (ΔS °) have declared that the adsorption process was feasible, exothermic and spontaneous in nature. Sticking probability reported that adsorption of Pb(II) ions on CMNP was favourable at lower temperature and sticking capacity of Pb(II) ions was very high.Inspec keywords: adsorption, lead, wastewater treatment, monolayers, Fourier transform infrared spectra, X‐ray chemical analysis, magnetometers, pHOther keywords: poisonous Pb(II) ions surface adsorption, chitosan functionalised magnetic nanoparticle, CMNP, Pb(II) ions removal, aqueous solution, finer adsorption capacity, heavy metal ion removal, contact time, solution pH, adsorbent dosage, adsorption equilibrium, Freundlich isotherm model, pseudofirst order kinetics, monolayer adsorption capacity, FTIR, energy disperse X‐ray analysis, vibrating sample magnetometer study, thermodynamic parameter, sticking probability, Pb(II) ions sticking capacity, initial Pb(II) ion concentration     

Higher adsorption capacity of Spirulina platensis alga for Cr(VI) ions removal: parameter optimisation,equilibrium, kinetic and thermodynamic predictions

This study discusses about the biosorption of Cr(VI) ion from aqueous solution using ultrasonic assisted Spirulina platensis (UASP). The prepared UASP biosorbent was characterised by Fourier transform infrared spectroscopy, X‐ray diffraction, Brunauer–Emmet–Teller, scanning electron spectroscopy and energy dispersive X‐ray and thermogravimetric analyses. The optimum condition for the maximum removal of Cr(VI) ions for an initial concentration of 50 mg/l by UASP was measured as: adsorbent dose of 1 g/l, pH of 3.0, contact time of 30 min and temperature of 303 K. Adsorption isotherm, kinetics and thermodynamic parameters were calculated. Freundlich model provided the best results for the removal of Cr(VI) ions by UASP. The adsorption kinetics of Cr(VI) ions onto UASP showed that the pseudo‐first‐order model was well in line with the experimental data. In the thermodynamic study, the parameters like Gibb''s free energy, enthalpy and entropy changes were evaluated. This result explains that the adsorption of Cr(VI) ions onto the UASP was exothermic and spontaneous in nature. Desorption of the biosorbent was done using different desorbing agents in which NaOH gave the best result. The prepared material showed higher affinity for the removal of Cr(VI) ions and this may be an alternative material to the existing commercial adsorbents.Inspec keywords: adsorption, ultrasonic applications, Fourier transform infrared spectra, X‐ray diffraction, scanning electron microscopy, X‐ray chemical analysis, thermal analysis, chromium, free energy, enthalpy, entropy, desorption, water treatment, water pollution, biological techniques, microorganismsOther keywords: Cr⁴⁺ , entropy changes, enthalpy changes, Gibb''s free energy, pseudofirst‐order model, Freundlich model, thermogravimetric analyses, energy dispersive X‐ray, scanning electron spectroscopy, Brunauer‐Emmet‐Teller, X‐ray diffraction, Fourier transform infrared spectroscopy, UASP biosorbent, ultrasonic assisted Spirulina platensis, aqueous solution, chromium ion biosorption, thermodynamic prediction, kinetic prediction, equilibrium prediction, parameter optimisation, chromium ion removal, Spirulina platensis alga, adsorption capacity     

Synthesis of Co3 O4 /graphene nanocomposite using paraffin wax for adsorption of methyl violet in water

This study discusses the use of Co₃ O₄ impregnated graphene (CoOIG) as an efficient adsorbent for the removal of methyl violet (MV) dye from wastewater. CoOIG nanocomposites have been prepared by pyrolyzing paraffin wax with cobalt acetate. The synthesised nanocomposite was characterised by X‐ray diffraction, field emission scanning electron microscope, transmission electron microscope, Fourier transform infrared spectroscope, Raman spectroscopy, and Brunauer–Emmett–Teller isotherm studies. The above studies indicate that the composites have cobalt oxide nanoparticles of size 51–58 nm embedded in the graphene nanoparticles. The adsorption studies were conducted with various parameters, pH, temperature and initial dye concentration, adsorbent dosage and contact time by the batch method. The adsorption of MV dye by the adsorbent CoOIG was about 90% initially at 15 min and 98% dye removal at pH 5. The data were fitted in Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich and Sips isotherm models. Various thermodynamic parameters like Gibbs free energy, enthalpy, and entropy of the on‐going adsorption process have also been calculated.Inspec keywords: cobalt compounds, graphene, nanoparticles, nanocomposites, nanofabrication, adsorption, dyes, scanning electron microscopy, field emission electron microscopy, transmission electron microscopy, Raman spectra, Fourier transform infrared spectra, free energy, enthalpy, entropyOther keywords: nanocomposite, paraffin wax, adsorption, methyl violet dye, water, X‐ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, Brunauer‐Emmett‐Teller isotherm, cobalt oxide nanoparticles, graphene nanoparticles, thermodynamic parameters, Gibbs free energy, enthalpy, entropy, Co₃ O₄ ‐C     

Rapid removal of lead(II) ions from water using iron oxide–tea waste nanocomposite – a kinetic study

Lead (Pb) ions are a major concern to the environment and human health as they are contemplated cumulative poisons. In this study, facile synthesis of magnetic iron oxide–tea waste nanocomposite is reported for adsorptive removal of lead ions from aqueous solutions and easy magnetic separation of the adsorbent afterwards. The samples were characterised by scanning electron microscopy, Fourier transform‐infrared spectroscopy, X‐ray diffraction, and Braunner–Emmet–Teller nitrogen adsorption study. Adsorptive removal of Pb(II) ions from aqueous solution was followed by ultraviolet–visible (UV–Vis) spectrophotometry. About 95% Pb(II) ion removal is achieved with the magnetic tea waste within 10 min. A coefficient of regression R ²  ≃ 0.99 and adsorption density of 18.83 mg g⁻¹ was found when Pb(II) ions were removed from aqueous solution using magnetic tea waste. The removal of Pb(II) ions follows the pseudo‐second‐order rate kinetics. External mass transfer principally regulates the rate‐limiting phenomena of adsorption of Pb(II) ions on iron oxide–tea waste surface. The results strongly imply that magnetic tea waste has promising potential as an economic and excellent adsorbent for the removal of Pb(II) from water.Inspec keywords: visible spectra, scanning electron microscopy, mass transfer, ultraviolet spectra, X‐ray diffraction, nanocomposites, lead, adsorption, magnetic separation, iron compounds, nanofabrication, Fourier transform infrared spectraOther keywords: FeO, Pb, time 10.0 min, X‐ray diffraction, Fourier transform‐infrared spectroscopy, scanning electron microscopy, adsorbent, magnetic separation, rapid removal, Braunner–Emmet–Teller nitrogen adsorption, iron oxide–tea waste surface, magnetic tea waste, aqueous solution, adsorptive removal, magnetic iron oxide–tea waste nanocomposite, lead(II) ions     

Sorption of Cu(II) ions by nano‐scale zero valent iron supported on rubber seed shell

This study focused on synthesising nano‐scale zero valent iron (NZVI) impregnated on a low‐cost agro‐waste material, rubber seed shell (RSS), by borohydride reduction method. The characterisation studies of NZVI‐RSS were performed by Fourier transform infrared spectroscopy, scanning electron microscopy and X‐ray diffraction. The adsorption execution of NZVI‐RSS for Cu(II) ions evacuation from synthetic wastewater was explored by batch studies. The optimum condition for the present adsorption system is as follows: Cu(II) ion concentration = 25 mg/l; solution pH = 6.0; contact time = 30 min; NZVI‐RSS dose = 3 g/l; temperature = 30°C. The sorption data were best portrayed by pseudo‐first‐order and Freundlich models. The outcomes demonstrated the multilayer sorption of Cu(II) ions by NZVI‐RSS. The Langmuir capacity was observed as 48.18 mg/g. Thermodynamic parameters, ΔG °, ΔH ° and ΔS ° were ascertained, and it was watched that the adsorption system was unconstrained and exothermic. The sticking probability for Cu(II) ions by NZVI‐RSS was found to be high at lower temperature. At long last, the research inquire about reasoned that NZVI‐RSS has demonstrated unrivalled adsorption capacity. Also NZVI‐RSS is thought to be really green and financially amicable support for wastewater treatment.Inspec keywords: adsorption, copper, X‐ray diffraction, scanning electron microscopy, wastewater treatment, Fourier transform infrared spectroscopyOther keywords: nano‐scale zero valent iron, rubber seed shell, copper ions, borohydride reduction method, NZVI‐RSS, Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, adsorption execution, synthetic wastewater, Langmuir capacity, Freundlich models, adsorption system, wastewater treatment, adsorption capacity, Cu     

Photocatalytic degradation of synthetic dyes using iron (III) oxide nanoparticles (Fe2 O3 ‐Nps) synthesised using Rhizophora mucronata Lam

Biosynthesis of nanoparticles through plant extracts is gaining attention due to the toxic free synthesis process. The environmental engineering applications of many metal oxide nanoparticles have been reported. In this study, iron oxide nanoparticles (Fe₂ O₃ ‐Nps) were synthesised using a simple biosynthetic method using a leaf extract of a mangrove plant Rhizophora mucronata through reduction of 0.01 M ferric chloride. Fe₂ O₃ ‐Np synthesis was revealed by a greenish colour formation with a surface plasmon band observed close to 368 nm. The stable Fe₂ O₃ ‐Np possessed excitation and emission wavelength of 368.0 and 370.5 nm, respectively. The Fourier‐transform infrared spectral analysis revealed the changes in functional groups during formation of Fe₂ O₃ ‐Np. Agglomerations of nanoparticles were observed during scanning electron microscopic analysis and energy‐dispersive X‐ray spectroscopic analysis confirmed the ferric oxide nature. The average particle size of Fe₂ O₃ ‐Np based on dynamic light scattering was 65 nm. Based on transmission electron microscopic analysis, particles were spherical in shape and the crystalline size was confirmed by selected area electron diffraction pattern analysis. The synthesised Fe₂ O₃ ‐Np exhibited a good photodegradation efficiency with a reduction of 83 and 95% of phenol red and crystal violet under irradiation of sunlight and florescent light, respectively. This report is a facile synthesis method for Fe₂ O₃ ‐Np with high photodegradation efficiency.Inspec keywords: photochemistry, dyes, nanofabrication, transmission electron microscopy, scanning electron microscopy, nanoparticles, iron compounds, X‐ray diffraction, catalysts, catalysis, particle size, X‐ray chemical analysis, electron diffraction, Fourier transform infrared spectra, surface plasmonsOther keywords: energy‐dispersive X‐ray spectroscopic analysis, ferric oxide nature, transmission electron microscopic analysis, selected area electron diffraction pattern analysis, iron oxide nanoparticles, plant extracts, toxic free synthesis process, metal oxide nanoparticles, metal nanoparticles, nanofiltration, nanobiocides, Rhizophora mucronata Lam, crystalline size, phenol red, crystal violet, sunlight irradiation, florescent light, scanning electron microscopic analysis, Fourier‐transform infrared spectral analysis, surface plasmon, ferric chloride, leaf extract, nanocatalysts, nanoadsorbents, photocatalytic degradation, synthetic dyes, mangrove plant, water remediation, wastewater pollutant, wavelength 370.5 nm, wavelength 368.0 nm, Fe₂ O₃      

Catalytic hydrolysis of cellobiose using different acid‐functionalised Fe3 O4 magnetic nanoparticles

The present study demonstrated the preparation of three different acid‐functionalised magnetic nanoparticles (MNPs) and evaluation for their catalytic efficacy in hydrolysis of cellobiose. Initially, iron oxide (Fe₃ O₄)MNPs were synthesised, which further modified by applying silica coating (Fe₃ O₄ ‐MNPs@Si) and functionalised with alkylsulfonic acid (Fe₃ O₄ ‐MNPs@Si@AS), butylcarboxylic acid (Fe₃ O₄ ‐MNPs@Si@BCOOH) and sulphonic acid (Fe₃ O₄ ‐MNPs@Si@SO₃ H) groups. The Fourier transform infrared analysis confirmed the presence of above‐mentioned acid functional groups on MNPs. Similarly, X‐ray diffraction pattern and energy dispersive X‐ray spectroscopy analysis confirmed the crystalline nature and elemental composition of MNPs, respectively. TEM micrographs showed the synthesis of spherical and polydispersed nanoparticles having diameter size in the range of 20–80 nm. Cellobiose hydrolysis was used as a model reaction to evaluate the catalytic efficacy of acid‐functionalised nanoparticles. A maximum 74.8% cellobiose conversion was reported in case of Fe₃ O₄ ‐MNPs@Si@SO₃ H in first cycle of hydrolysis. Moreover, thus used acid‐functionalised MNPs were magnetically separated and reused. In second cycle of hydrolysis, Fe₃ O₄ ‐MNPs@Si@SO₃ H showed 49.8% cellobiose conversion followed by Fe₃ O₄ ‐MNPs@Si@AS (45%) and Fe₃ O₄ ‐MNPs@Si@BCOOH (18.3%). However, similar pattern was reported in case of third cycle of hydrolysis. The proposed approach is considered as rapid and convenient. Moreover, reuse of acid‐functionalised MNPs makes the process economically viable.Inspec keywords: scanning electron microscopy, catalysis, magnetic separation, magnetic particles, silicon compounds, iron compounds, nanomagnetics, coatings, X‐ray chemical analysis, nanoparticles, X‐ray diffraction, nanofabrication, Fourier transform infrared spectra, organic compounds, nanocompositesOther keywords: catalytic efficacy, alkylsulfonic acid, butylcarboxylic acid, energy dispersive X‐ray spectroscopy analysis, spherical polydispersed nanoparticles, cellobiose hydrolysis, acid‐functionalised MNPs, acid functional groups, cellobiose conversion, acid‐functionalised magnetic nanoparticle, silica coating, sulphonic acid, Fourier transform infrared analysis, SEM micrograph, X‐ray diffraction pattern, size 20.0 nm to 80.0 nm, Fe₃ O₄ , Si, SiO₂      

Biosynthesis of γ ‐Fe2 O3 @CuO core–shell nanoclusters using aqueous extract of Sesbania grandiflora Linn fresh leaves,its characterisation,and antimicrobial activity studies against Staphylococcus aureus strains

The present study reports an eco‐friendly and rapid method for the synthesis of core–shell nanoclusters using the modified reverse micelle method. It is a green synthetic method which uses Sesbania grandiflora Linn extract which acts as a reducing and capping agent. It is observed that this method is very fast and convenient and the nanoclusters are formed with 5–10 min of the reaction time without using harsh conditions. The core–shell nanoclusters so prepared were characterised using UV–Vis spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy. Further, their effective antibacterial activity towards the gram‐positive bacteria Staphylococcus aureus was found to be due to their smaller particle size.Inspec keywords: iron compounds, copper compounds, nanoparticles, particle size, nanofabrication, nanomedicine, biomedical materials, core‐shell nanostructures, antibacterial activity, ultraviolet spectra, visible spectra, microorganisms, reduction (chemical), scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectraOther keywords: biosynthesis, γ‐Fe₂ O₃ ‐CuO core‐shell nanoclusters, aqueous extract, Sesbania grandiflora Linn fresh leaves, antimicrobial activity, Staphylococcus aureus strains, eco‐friendly method, modified reverse micelle method, green synthetic method, reducing agent, capping agent, UV‐visible spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, antibacterial activity, gram‐positive bacteria Staphylococcus aureus, particle size, time 5 min to 10 min, Fe₂ O₃ ‐CuO     

Green synthesis of magnetically recoverable Fe3 O4 /HZSM‐5 and its Ag nanocomposite using Juglans regia L. leaf extract and their evaluation as catalysts for reduction of organic pollutants

In this work, an Fe₃ O₄ /HZSM‐5 nanocomposite was synthesised in the presence of Juglans regia L. leaf extract. Then, silver nanoparticles (Ag NPs) were immobilised on the surface of prepared magnetically recoverable HZSM‐5 using selected extract for reduction of Ag⁺ ions to Ag NPs and their stabilisation on the surface of the nanocomposite. The reduction of Ag⁺ ions occurs at room temperature within a few minutes. Characterisation of the prepared catalysts has been carried out using fourier transform infrared (FT‐IR), X‐ray diffraction, field‐emission scanning electron microscopy (FESEM), energy‐dispersive spectroscopy, Brunauer–Emmett–Teller method, and a vibrating sample magnetometer. According to the FESEM images of the nanocomposites, the average size of the Ag NPs on the Fe₃ O₄ /HZSM‐5 surface was >70 nm. The Ag/Fe₃ O₄ /HZSM‐5 nanocomposite was a highly active catalyst for the reduction of methyl orange and 4‐nitrophenol in aqueous medium. The utilisation of recycled catalyst for three times in the reduction process does not decrease its activity.Inspec keywords: silver, X‐ray chemical analysis, X‐ray diffraction, nanocomposites, reduction (chemical), nanofabrication, nanoparticles, transmission electron microscopy, catalysts, Fourier transform infrared spectra, iron compounds, field emission scanning electron microscopy, zeolites, magnetometry, particle sizeOther keywords: Ag‐Fe₃ O₄ , temperature 293 K to 298 K, green synthesis, catalyst material, 4‐nitrophenol reduction, methyl orange reduction, particle size, vibrating sample magnetometry, Brunauer–Emmett–Teller method, field‐emission scanning electron microscopy, X‐ray diffraction, FT‐IR spectroscopy, silver nanoparticles, Juglans regia L. leaf extract, organic pollutant reduction, magnetically recoverable nanocomposites, energy‐dispersive spectroscopy     

Solvothermal‐assisted green synthesis of hybrid Chi‐Fe3 O4 nanocomposites: a potential antibacterial and antibiofilm material

In this present study, a hybrid Chi‐Fe₃ O₄ was prepared, characterised and evaluated for its antibacterial and antibiofilm potential against Staphylococcus aureus and Staphylococcus marcescens bacterial pathogens. Intense peak around 260 nm in the ultraviolet–visible spectrum specify the formation of magnetite nanoparticles. Spherical‐shaped particles with less agglomeration and particle size distribution of 3.78–46.40 nm were observed using transmission electron microscopy analysis and strong interaction of chitosan with the surface of magnetite nanoparticles was studied using field emission scanning microscopy (FESEM). X‐ray diffraction analysis exhibited the polycrystalline and spinel structure configuration of the nanocomposite. Presence of Fe and O, C and Cl elements were confirmed using energy dispersive X‐ray microanalysis. Fourier transform infrared spectroscopic analysis showed the reduction and formation of Chi‐Fe₃ O₄ nanocomposite. The antibacterial activity by deformation of the bacterial cell walls on treatment with Chi‐Fe₃ O₄ nanocomposite and its interaction was visualised using FESEM and the antibiofilm activity was determined using antibiofilm assay. In conclusion, this present study shows the green synthesis of Chi‐Fe₃ O₄ nanocomposite and evaluation of its antibacterial and antibiofilm potential, proving its significance in medical and biological applicationsInspec keywords: visible spectra, particle size, magnetic particles, nanocomposites, nanoparticles, X‐ray diffraction, nanofabrication, transmission electron microscopy, X‐ray chemical analysis, nanomagnetics, microorganisms, antibacterial activity, iron compounds, ultraviolet spectra, biomedical materials, field emission scanning electron microscopy, Fourier transform infrared spectra, filled polymers, crystal growth from solution, polymer structureOther keywords: potential antibacterial material, antibiofilm potential, magnetite nanoparticles, solvothermal‐assisted green synthesis, hybrid Chi‐Fe₃ O₄ nanocomposites, staphylococcus aureus, staphylococcus marcescens, bacterial pathogens, ultraviolet–visible spectrum, spherical‐shaped particles, particle size, transmission electron microscopy, FESEM, field emission scanning electron microscopy, X‐ray diffraction, spinel structure, polycrystalline structure, energy dispersive X‐ray microanalysis, Fourier transform infrared spectroscopic analysis, deformation, bacterial cell walls, Fe₃ O₄      

Postprandial anti‐hyperglycemic activity of marine Streptomyces coelicoflavus SRBVIT13 mediated gold nanoparticles in streptozotocin induced diabetic male albino Wister rats

The present study focuses on the biosynthesis of gold nanoparticles (AuNPs) using Streptomyces coelicoflavus (S. coelicoflavus) SRBVIT13 isolated from marine salt pan soils collected from Ongole, Andhra Pradesh, India. The biosynthesised AuNPs are characterised by UV–visible spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, high‐resolution transmission electron microscopy and energy‐dispersive X‐ray analysis. Transmission electron microscopy study suggests that the biosynthesised AuNPs are spherical in shape within a size range of 12–20 nm (mean diameter as 14 nm). The anti‐type II diabetes activity of AuNPs is carried out by testing it in vitro α ‐glucosidase and α ‐amylase enzyme inhibition activity and in vivo postprandial anti‐hyperglycemic activity in sucrose and glucose‐loaded streptozotocin induced diabetic albino Wister rats. AuNPs has shown a significant inhibitory activity of 84.70 and 87.82% with IC₅₀ values of 67.65 and 65.59 μg/mL to α ‐glucosidase and α ‐amylase enzymes, while the diabetic rats have shown significant reduction in the post postprandial blood glucose level by 57.80 and 88.09%, respectively compared with control group after AuNPs treatment at the concentration of 300 and 600 mg/kg body weight. Hence, this biosynthesised AuNPs might be useful in combating type II diabetes mellitus for the betterment of human life.Inspec keywords: gold, nanoparticles, ultraviolet spectra, visible spectra, X‐ray diffraction, Fourier transform infrared spectra, transmission electron microscopy, X‐ray chemical analysis, diseases, enzymes, nanomedicine, biochemistry, spectrochemical analysisOther keywords: gold nanoparticles, Streptomyces coelicoflavus SRBVIT13, biosynthesis, UV–visible spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, high‐resolution transmission electron microscopy, energy‐dispersive X‐ray analysis, antitype II diabetes activity, in vitro enzyme inhibition activity, in vivo postprandial antihyperglycemic activity, streptozotocin induced diabetic albino Wister rats, type II diabetes mellitus, Au     

Biogenic synthesis and thermo‐magnetic study of highly porous carbon nanotubes

Nanomaterials synthesis using natural sources is the technology to up come with advanced materials through extracts of plant, microorganisms, poultry waste etc. In this study, the authors report the synthesis of porous carbon nanotubes using high‐temperature decomposition technique facilitated by cobalt salt using chicken fats, a poultry waste as a precursor. Since chicken fats contain fatty acids which can decompose into short hydrocarbon chains and cobalt can act as the catalyst. The formation of carbon nanotubes was confirmed by Raman spectra, peaks at 1580 and 1350.46 cm⁻¹ confirmed the graphite mode G‐band and structural imperfections defect mode D‐band, respectively. Transmission electron microscopy showed the formation of tube‐like structures. Nitrogen adsorption–desorption studies showed the high‐surface area of 418.1 m² g⁻¹ with an estimated pore diameter of 8.1 nm. Thermogravimetry analysis–derivative thermogravimetric analysis–differential thermal analysis showed the instant weight loss at 517°C attributed to the rapid combustion of nanotubes. A vibrating‐sample magnetometer showed the paramagnetic nature of the so‐formed carbon nanotubes formed.Inspec keywords: transmission electron microscopy, infrared spectra, nanomagnetics, pyrolysis, decomposition, adsorption, desorption, carbon nanotubes, differential thermal analysis, thermal analysis, nanofabrication, Raman spectra, X‐ray diffraction, scanning electron microscopy, paramagnetic materialsOther keywords: biogenic synthesis, highly porous carbon nanotubes, microorganisms, high‐temperature decomposition technique, cobalt salt, chicken fats, fatty acids, short hydrocarbon chains, Raman spectra, graphite mode G‐band, structural imperfections defect mode D‐band, transmission electron microscopy, paramagnetic nature, thermo‐magnetic properties, poultry waste, nitrogen adsorption‐desorption studies, thermogravimetry analysis, differential thermal analysis, carbon nanotubes, temperature 517.0 degC, C     

Biosynthesis of Silver Nanoparticles by Streptomyces griseorubens isolated from Soil and Their Antioxidant Activity

Microbial mediated biological synthesis of metallic nanoparticles was carried out ecofriendly in the present study. Silver nanoparticles (AgNPs) were extracellularly biosynthesised from Streptomyces griseorubens AU2 and extensively characterised by ultraviolet–visible (UV–vis) and Fourier transform infrared spectroscopy, high‐resolution transmission electron microscopy, scanning electron microscopy and X‐ray diffraction analysis. Elemental analysis of nanoparticles was also carried out using energy dispersive X‐ray spectroscopy. The biosynthesised AgNPs showed the characteristic absorption spectra in UV–vis at 422 nm which confirmed the presence of metallic AgNPs. According to the further characterisation analysis, the biosynthesised AgNPs were found to be spherical and crystalline particles with 5–20 nm average size. Antioxidant properties of the biosynthesised AgNPs were determined by 2,2‐diphenyl‐1‐picrylhydrazyl free radical scavenging assay and was found to increase in a dose‐dependent matter. The identification of the strain was determined by molecular characterisation method using 16s rDNA sequencing. The present study is the first report on the microbial biosynthesis of AgNPs using S. griseorubens isolated from soil and provides that the active biological components found in the cell‐free culture supernatant of S. griseorubens AU2 enable the synthesis of AgNPs.Inspec keywords: silver, microorganisms, nanoparticles, nanofabrication, DNA, molecular biophysics, ultraviolet spectra, visible spectra, scanning electron microscopy, Fourier transform infrared spectra, transmission electron microscopy, X‐ray diffraction, X‐ray chemical analysis, absorption coefficients, cellular biophysicsOther keywords: silver nanoparticles, Streptomyces griseorubens AU2, soil, antioxidant activity, microbial mediated biological synthesis, ultraviolet‐visible spectroscopy, Fourier transform infrared spectroscopy, UV‐vis spectroscopy, high‐resolution transmission electron microscopy, scanning electron microscopy, X‐ray diffraction, elemental analysis, energy dispersive X‐ray spectroscopy, absorption spectra, spherical particles, crystalline particles, 2,2‐diphenyl‐1‐picrylhydrazyl free radical scavenging assay, strain identification, molecular characterisation method, rDNA sequencing, active biological components, cell‐free culture supernatant, wavelength 422 nm, size 5 nm to 20 nm, Ag     

Synthesis of biosurfactant‐coated magnesium oxide nanoparticles for methylene blue removal and selective Pb2+ sensing

Dyes and lead (Pb²⁺) are toxic compounds that can contaminant water. In this study, magnesium oxide (MgO) nanoparticles (NPs) prepared using clove, i.e. Syzygium aromaticum extract [clove extract (CE)] were used for methylene blue (MB) removal and Pb²⁺ ion sensing in aqueous solution. Maximum 90% MB removal was achieved using MgO NPs. The MB adsorption on MgO NPs surface followed second‐order kinetics and Langmuir isotherm. MB dye was adsorbed as a monolayer on the surface of MgO NPs with maximum adsorption capacity, 5555 mg g⁻¹. MgO NPs were also able to selectively detect lead (Pb²⁺) in 1 nM–200 µM range with 24 µM (3σ) limit of detection. So, CE prepared MgO NPs are useful for MB dye adsorption and metal ion sensing applications.Inspec keywords: magnesium compounds, nanoparticles, dyes, lead, chemical sensors, adsorptionOther keywords: biosurfactant‐coated magnesium oxide nanoparticles, methylene blue removal, selective lead sensing, dyes, toxic compounds, Syzygium aromaticum extract, clove extract, MB adsorption, second‐order kinetics, Langmuir isotherm, maximum adsorption capacity, MgO, Pb²⁺      

Phyto‐mediated synthesis,biological and catalytic activity studies of gold nanoparticles

In the present study, a phyto‐mediated synthesis of gold nanoparticles (AuNPs) using an isoflavone, Dalspinosin (5,7‐dihydroxy‐6,3′,4′‐trimethoxy isoflavone) isolated from the alcoholic extract of roots of Dalbergia coromandeliana is reported. It is observed that Dalspinosin itself acts both as a reducing and a capping agent in the synthesis of the nanoparticles (NPs). An ultraviolet–visible (UV–Vis) spectral study showed a surface plasmon resonance band at 526 nm confirming the formation of AuNPs. The NPs formed were characterised by UV–Vis spectroscopy, Fourier transform‐infrared spectroscopy, X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HR‐TEM) with energy‐dispersive x‐ray spectroscopy (EDX) and dynamic light scattering. HR‐TEM analysis showed the synthesised AuNPs were spherical in shape with a size of 7.5 nm. The AuNPs were found to be stable for seven months when tested by in vitro methods showed good antioxidant and anti‐inflammatory activities. They also showed moderate anti‐microbial activities when tested against Gram positive (Staphylococcus aureus and Streptococcus sp), Gram negative bacterial strains (Klebsiella pneumonia and Klebsiella terrigena) and fungal strain (Candida glabrata). The biosynthesised AuNPs showed significant catalytic activity in the reduction of methylene blue with NaBH₄ to leucomethylene blue.Inspec keywords: biomedical materials, catalysis, Fourier transform infrared spectra, gold, light scattering, microorganisms, nanomedicine, nanoparticles, spectrochemical analysis, surface plasmon resonance, transmission electron microscopy, ultraviolet spectra, visible spectra, X‐ray chemical analysis, X‐ray diffractionOther keywords: phyto‐mediated synthesis, biological activity studies, catalytic activity studies, dalspinosin (5,7‐dihydroxy‐6,3′,4′‐trimethoxy isoflavone), alcoholic extract, roots, Dalbergia coromandeliana, ultraviolet‐visible spectral study, surface plasmon resonance band, UV‐Vis spectroscopy, Fourier transform‐infrared spectroscopy, X‐ray diffraction, high‐resolution transmission electron microscopy, EDX analysis, dynamic light scattering, HR‐TEM analysis, antioxidant activities, antiinflammatory activities, antimicrobial activities, Gram positive bacterial strains, Staphylococcus aureus, Streptococcus sp, Gram negative bacterial strains, wavelength 526 nm, size 7.5 nm, time 7 month, Au     

Green synthesis of highly stable carbon nanodots and their photocatalytic performance

The present study reports a novel, facile, biosynthesis route for the synthesis of carbon nanodots (CDs) with an approximate quantum yield of 38.5%, using Musk melon extract as a naturally derived‐precursor material. The synthesis of CDs was established by using ultraviolet–visible (UV–vis) spectroscopy, Dynamic light scattering, photoluminescence spectroscopy, X‐ray diffraction, transmission electron microscopy and Fourier transform infrared (FTIR) spectroscopy. The as‐prepared CDs possess an eminent fluorescence under UV–light (λ _ex  = 365 nm). The size range of CDs was found to be in the range of 5–10 nm. The authors further explored the use of such biosynthesised CDs as a photocatalyst material for removal of industrial dye. Degradation of methylene blue dye was performed in a photocatalytic reactor and monitored using UV–vis spectroscopy. The CDs show excellent dye degradation capability of 37.08% in 60 min and reaction rate of 0.0032 min⁻¹. This study shows that synthesised CDs are highly stable in nature, and possess potential application in wastewater treatment.Inspec keywords: carbon, nanostructured materials, nanofabrication, catalysis, photochemistry, ultraviolet spectra, visible spectra, photoluminescence, X‐ray diffraction, transmission electron microscopy, Fourier transform infrared spectra, fluorescence, dyesOther keywords: green synthesis, highly stable CD, photocatalytic performance, biosynthesis route, carbon nanodots, quantum yield, Musk melon extract, naturally derived‐precursor material, ultraviolet‐visible spectroscopy, dynamic light scattering, photoluminescence spectroscopy, X‐ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, FTIR spectroscopy, fluorescence, biosynthesised CD, photocatalyst material, industrial dye, methylene blue dye degradation, photocatalytic reactor, UV‐vis spectroscopy, wastewater treatment, size 5 nm to 10 nm, time 60 min     

Green chemistry synthesis of nano‐cuprous oxide

Green chemistry and a central composite design, to evaluate the effect of reducing agent, temperature and pH of the reaction, were employed to produce controlled cuprous oxide (Cu₂ O) nanoparticles. Response surface method of the ultraviolet–visible spectroscopy is allowed to determine the most relevant factors for the size distribution of the nanoCu₂ O. X‐ray diffraction reflections correspond to a cubic structure, with sizes from 31.9 to 104.3 nm. High‐resolution transmission electron microscopy reveals that the different shapes depend strongly on the conditions of the green synthesis.Inspec keywords: nanostructured materials, copper compounds, nanofabrication, pH, response surface methodology, ultraviolet spectra, X‐ray diffraction, transmission electron microscopyOther keywords: green chemistry synthesis, nanocuprous oxide, reducing agent, reaction pH, response surface method, ultraviolet‐visible spectroscopy, size distribution, cubic structure, high‐resolution transmission electron microscopy, X‐ray diffraction reflection, central composite design, Cu₂ O