Superparamagnetic cobalt ferrite nanoparticles as T 2 contrast agent in MRI: in vitro study

Superparamagnetic cobalt ferrite nanoparticles (CoFe₂ O₄) possess favourite advantages for theranostic applications. Most of previous studies reported that CoFe₂ O₄ magnetic nanoparticles (MNPs) are suitable candidates for induction of hyperthermia and transfection agents for drug delivery. The present study synthesized and investigated the potential use of CoFe₂ O₄ as a contrast agent in magnetic resonance imaging (MRI) by using a conventional MRI system. The CoFe₂ O₄ were synthesized using co‐precipitation method and characterized by TEM, XRD, FTIR, EDX and VSM techniques. Relaxivities r ₁ and r ₂ of CoFe₂ O₄ were then calculated using a 1.5 Tesla clinical magnetic field. The cytotoxicity of CoFe₂ O₄ was evaluated by the MTT assay. Finally, the optimal concentrations of MNPs for MRI uses were calculated through the analysis of T ₂ weighted imaging cell phantoms. The superparamagnetic CoFe2O4 NPs with an average stable size of 10.45 nm were synthesized. Relaxivity r ₁, ₂ calculations resulted in suitable r ₂ and r ₂ / r ₁ with values of 58.6 and 51 that confirmed the size dependency on relaxivity values. The optimal concentration of MNPs for MR image acquisition was calculated as 0.154 mM. Conclusion: CoFe₂ O₄ synthesized in this study could be considered as a suitable T ₂ weighted contrast agent because of its high r ₂ /r ₁ value.Inspec keywords: nanoparticles, phantoms, transmission electron microscopy, superparamagnetism, ferrites, cellular biophysics, precipitation (physical chemistry), magnetisation, cobalt compounds, nanomagnetics, magnetic particles, nanofabrication, biomedical MRI, nanomedicine, X‐ray diffraction, Fourier transform infrared spectra, X‐ray chemical analysis, particle size, medical image processingOther keywords: superparamagnetic cobalt ferrite nanoparticles, T₂ contrast agent, MRI, in vitro study, magnetic resonance imaging, coprecipitation method, transmission electron microscopy, X‐ray diffraction, Fourier‐transform IR spectra, energy dispersive X‐ray analysis, vibrating sample magnetometer, clinical magnetic field, cytotoxicity, MTT assay, T₂ weighted imaging cell phantoms, T₂ weighted contrast agent, stable size, size dependency, relaxivity values, MR image acquisition, magnetic flux density 1.5 T, CoFe₂ O₄      

Catalytic hydrolysis of cellobiose using different acid‐functionalised Fe3 O4 magnetic nanoparticles

The present study demonstrated the preparation of three different acid‐functionalised magnetic nanoparticles (MNPs) and evaluation for their catalytic efficacy in hydrolysis of cellobiose. Initially, iron oxide (Fe₃ O₄)MNPs were synthesised, which further modified by applying silica coating (Fe₃ O₄ ‐MNPs@Si) and functionalised with alkylsulfonic acid (Fe₃ O₄ ‐MNPs@Si@AS), butylcarboxylic acid (Fe₃ O₄ ‐MNPs@Si@BCOOH) and sulphonic acid (Fe₃ O₄ ‐MNPs@Si@SO₃ H) groups. The Fourier transform infrared analysis confirmed the presence of above‐mentioned acid functional groups on MNPs. Similarly, X‐ray diffraction pattern and energy dispersive X‐ray spectroscopy analysis confirmed the crystalline nature and elemental composition of MNPs, respectively. TEM micrographs showed the synthesis of spherical and polydispersed nanoparticles having diameter size in the range of 20–80 nm. Cellobiose hydrolysis was used as a model reaction to evaluate the catalytic efficacy of acid‐functionalised nanoparticles. A maximum 74.8% cellobiose conversion was reported in case of Fe₃ O₄ ‐MNPs@Si@SO₃ H in first cycle of hydrolysis. Moreover, thus used acid‐functionalised MNPs were magnetically separated and reused. In second cycle of hydrolysis, Fe₃ O₄ ‐MNPs@Si@SO₃ H showed 49.8% cellobiose conversion followed by Fe₃ O₄ ‐MNPs@Si@AS (45%) and Fe₃ O₄ ‐MNPs@Si@BCOOH (18.3%). However, similar pattern was reported in case of third cycle of hydrolysis. The proposed approach is considered as rapid and convenient. Moreover, reuse of acid‐functionalised MNPs makes the process economically viable.Inspec keywords: scanning electron microscopy, catalysis, magnetic separation, magnetic particles, silicon compounds, iron compounds, nanomagnetics, coatings, X‐ray chemical analysis, nanoparticles, X‐ray diffraction, nanofabrication, Fourier transform infrared spectra, organic compounds, nanocompositesOther keywords: catalytic efficacy, alkylsulfonic acid, butylcarboxylic acid, energy dispersive X‐ray spectroscopy analysis, spherical polydispersed nanoparticles, cellobiose hydrolysis, acid‐functionalised MNPs, acid functional groups, cellobiose conversion, acid‐functionalised magnetic nanoparticle, silica coating, sulphonic acid, Fourier transform infrared analysis, SEM micrograph, X‐ray diffraction pattern, size 20.0 nm to 80.0 nm, Fe₃ O₄ , Si, SiO₂      

Paederia foetida Linn. promoted synthesis of CoFe2 O4 and NiFe2 O4 nanostructures and their photocatalytic efficiency

A facile method of synthesis of cobalt ferrite (CoFe₂ O₄) and nickel ferrite (NiFe₂ O₄) nanoparticles (NPs) was developed using urea as a hydroxylating agent and Paederia foetida Linn. (family: Rubiaceae) leaf extract as a bio‐template. The synthesised ferrite NPs were characterised in a detailed manner by powder X‐ray diffraction (XRD), transmission electron microscopy, Fourier transform‐infrared spectroscopy and vibrating sample magnetometer analysis. The XRD patterns revealed the formation of cubic face‐centred phase for both CoFe₂ O₄ and NiFe₂ O₄ NPs. These quasi‐spherical particles of CoFe₂ O₄ and NiFe₂ O₄ were shown to have sizes in the range of 10–80 and 5–50 nm, respectively. The photocatalytic activity of metal ferrites was evaluated in H₂ O₂ assisted oxidative degradation of methylene blue (MB) and rhodamine B (RhB) under irradiation of solar light. Both metal ferrite photocatalysts exhibited pronounced activity in degradation of MB and RhB, respectively, but relatively higher activity was observed for NiFe₂ O₄. After completion, the catalysts were recovered using an external magnet. Recycling of these recovered catalysts up to five times showed no noticeable change in the efficiency.Inspec keywords: nanoparticles, nanofabrication, photochemistry, catalysts, cobalt compounds, nickel compounds, ferrites, X‐ray diffraction, transmission electron microscopy, Fourier transform infrared spectra, crystal structure, dyesOther keywords: Paederia foetida Linn, nanostructures, photocatalytic efficiency, cobalt ferrite nanoparticles, nickel ferrite nanoparticles, hydroxylating agent, leaf extract, bio‐template, powder X‐ray diffraction, transmission electron microscopy, Fourier transform‐infrared spectroscopy, vibrating sample magnetometer analysis, cubic face‐centred phase, quasi‐spherical particles, photocatalytic activity, methylene blue, rhodamine B, size 5 nm to 80 nm, CoFe₂ O₄ , NiFe₂ O₄      

Evaluation of antibacterial property of hydroxyapatite and zirconium oxide‐modificated magnetic nanoparticles against Staphylococcus aureus and Escherichia coli

In the first section of this research, superparamagnetic nanoparticles (NPs) (Fe₃ O₄) modified with hydroxyapatite (HAP) and zirconium oxide (ZrO₂) and thereby Fe₃ O₄ /HAP and Fe₃ O₄ /ZrO₂ NPs were synthesised through co‐precipitation method. Then Fe₃ O₄ /HAP and Fe₃ O₄ /ZrO₂ NPs characterised with various techniques such as X‐ray photoelectron spectroscopy, X‐ray diffraction, scanning electron microscopy, energy dispersive X‐ray analysis, Brunauer–Emmett–Teller, Fourier transform infrared, and vibrating sample magnetometer. Observed results confirmed the successful synthesis of desired NPs. In the second section, the antibacterial activity of synthesised magnetic NPs (MNPs) was investigated. This investigation performed with multiple microbial cultivations on the two bacteria; Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Obtained results proved that although both MNPs have good antibacterial properties, however, Fe₃ O₄ /HAP NP has greater antibacterial performance than the other. Based on minimum inhibitory concentration and minimum bactericidal concentration evaluations, S. aureus bacteria are more sensitive to both NPs. These nanocomposites combine the advantages of MNP and antibacterial effects, with distinctive merits including easy preparation, high inactivation capacity, and easy isolation from sample solutions by the application of an external magnetic field.Inspec keywords: nanocomposites, X‐ray chemical analysis, microorganisms, magnetic particles, scanning electron microscopy, precipitation (physical chemistry), nanomagnetics, X‐ray diffraction, X‐ray photoelectron spectra, nanoparticles, superparamagnetism, iron compounds, antibacterial activity, biomedical materials, nanomedicine, calcium compounds, nanofabrication, Fourier transform infrared spectra, magnetometers, zirconium compoundsOther keywords: antibacterial effects, antibacterial property, superparamagnetic nanoparticles, X‐ray photoelectron spectroscopy, X‐ray diffraction, X‐ray analysis, antibacterial activity, bactericidal concentration, S. aureus bacteria, Staphylococcus aureus, Escherichia coli, hydroxyapatite, coprecipitation method, scanning electron microscopy, energy dispersive X‐ray analysis, Brunauer‐Emmett‐Teller method, Fourier transform infrared spectroscopy, vibrating sample magnetometer, microbial cultivations, nanocomposites     

Magnetically responsive,sorafenib loaded alginate microspheres for hepatocellular carcinoma treatment

This study aimed to develop sorafenib loaded magnetic microspheres for the treatment of hepatocellular carcinoma. To achieve this goal, superparamagnetic iron oxide nanoparticles (SPIONs) were synthesised and encapsulated in alginate microspheres together with an antineoplastic agent, sorafenib. In the study, firstly SPIONs were synthesised and characterised by dynamic light scattering, energy‐dispersive X‐ray spectroscopy, and scanning electron microscopy. Then, alginate‐SPIONs microspheres were developed, and further characterised by electron spin resonance spectrometer and vibrating sample magnetometer. Besides the magnetic properties of SPIONs, alginate microspheres with SPIONs were also found to have magnetic properties. The potential use of microspheres in hyperthermia treatment was then investigated and an increase of about 4°C in the environment was found out. Drug release studies and cytotoxicity tests were performed after sorafenib was encapsulated into the magnetic microspheres. According to release studies, sorafenib has been released from microspheres for 8 h. Cytotoxicity tests showed that alginate‐SPION‐sorafenib microspheres were highly effective against cancerous cells and promising for cancer therapy.Inspec keywords: drug delivery systems, drugs, nanofabrication, magnetic particles, iron compounds, scanning electron microscopy, hyperthermia, biomedical materials, encapsulation, nanoparticles, light scattering, nanomagnetics, cellular biophysics, toxicology, cancer, nanomedicine, superparamagnetism, nanocomposites, magnetometry, paramagnetic resonance, X‐ray chemical analysisOther keywords: sorafenib loaded alginate microspheres, hepatocellular carcinoma treatment, sorafenib loaded magnetic microspheres, superparamagnetic iron oxide nanoparticles, dynamic light scattering, energy‐dispersive X‐ray spectroscopy, scanning electron microscopy, electron spin resonance spectrometer, vibrating sample magnetometer, hyperthermia treatment, drug release, alginate‐SPION‐sorafenib microspheres, antineoplastic agent, cytotoxicity tests, cancerous cells, time 8.0 hour, Fe₃ O₄      

Facile synthesis of mesoporous alumina using hexadecyltrimethylammonium bromide (HTAB) as template: simplified sol‐gel approach

Herein the authors present the synthesis of surface functionalised mesoporous alumina (MeAl) for textural characterisation by a simplified sol–gel method obtained by using hexadecyltrimethylammonium bromide as a template. Etoricoxib (ETOX) was used as a model drug for the study. Alumina supported mesoporous material containing drug was characterised using instrumental technique namely Brunauer–Emmett–Teller surface area, Fourier transform‐infrared, differential scanning calorimetry, transmission electron microscopy, X‐ray diffraction, and field emission scanning electron microscopy. Diffusion study using a dialysis bag method used to check the release pattern of ETOX‐loaded‐MeAl. Results of characterisation study revealed the successful surface functionalisation of the drug on nanocomposite. The IC₅₀ value obtained from cell viability study demonstrated the non‐toxic behaviour of synthesised drug‐loaded mesoporous alumina up to the tested concentration range. The present work has demonstrated that synthesised MeAl showed excellent stability with an expanded surface area suitable for carrier material for drug delivery system.Inspec keywords: Fourier transform spectra, adsorption, biomedical materials, silicon compounds, drug delivery systems, X‐ray diffraction, alumina, differential scanning calorimetry, nanocomposites, field emission electron microscopy, nanofabrication, nanomedicine, mesoporous materials, transmission electron microscopy, sol‐gel processing, scanning electron microscopyOther keywords: ETOX‐loaded‐MeAl, successful surface functionalisation, synthesised drug‐loaded mesoporous alumina, synthesised MeAl, expanded surface area, drug delivery system, hexadecyltrimethylammonium bromide, sol‐gel approach, surface functionalised mesoporous alumina, simplified sol–gel method, mesoporous material containing drug, Brunauer–Emmett–Teller surface area, Fourier transform‐infrared, differential scanning calorimetry, transmission electron microscopy, X‐ray diffraction, field emission scanning electron microscopy, dialysis bag method     

Folate encapsulation in PEG‐diamine grafted mesoporous Fe3 O4 nanoparticles for hyperthermia and in vitro assessment

Effective and targeted delivery of the antitumour drugs towards the specific cancer spot is the major motive of drug delivery. In this direction, suitably functionalised magnetic iron oxide nanoparticles (NPs) have been utilised as a theranostic agent for imaging, hyperthermia and drug delivery applications. Herein, the authors reported the preparation of multifunctional polyethyleneglycol‐diamine functionalised mesoporous superparamagnetic iron oxide NPs (SPION) prepared by a facile solvothermal method for biomedical applications. To endow targeting ability towards tumour site, folic acid (FA) is attached to the amine groups which are present on the NPs surface by 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide hydrochloride/N‐hydroxysuccinimide chemistry. FA attached SPION shows good colloidal stability and possesses high drug‐loading efficiency of ∼ 96% owing to its mesoporous nature and the electrostatic attachment of daunosamine (NH₃ ⁺) group of doxorubicin (DOX) towards the negative surface charge of carboxyl and hydroxyl group. The NPs possess superior magnetic properties in result endowed with high hyperthermic ability under alternating magnetic field reaching the hyperthermic temperature of 43°C within 223 s at NP''s concentration of 1 mg/ml. The functionalised NPs possess non‐appreciable toxicity in breast cancer cells (MCF‐7) which is triggered under DOX‐loaded SPION.Inspec keywords: nanoparticles, nanocomposites, mesoporous materials, colloids, biochemistry, nanomagnetics, molecular biophysics, tumours, superparamagnetism, drugs, toxicology, biomedical materials, nanofabrication, hyperthermia, cancer, magnetic particles, cellular biophysics, nanomedicine, iron compounds, drug delivery systems, filled polymers, biological organs, liquid phase depositionOther keywords: NP surface, colloidal stability, drug‐loading efficiency, hydroxyl group, magnetic properties, high hyperthermic ability, magnetic field, DOX‐loaded SPION, folate encapsulation, targeted delivery, antitumour drugs, specific cancer spot, magnetic iron oxide nanoparticles, theranostic agent, drug delivery applications, multifunctional polyethyleneglycol‐diamine, facile solvothermal method, biomedical applications, tumour site, amine groups, mesoporous superparamagnetic nanoparticles, PEG‐diamine grafted mesoporous nanoparticles, 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide hydrochloride‐N‐hydroxysuccinimide chemistry, daunosamine group, carboxyl group, breast cancer cells, temperature 43.0 degC, Fe₃ O₄      

Green synthesis of magnetically recoverable Fe3 O4 /HZSM‐5 and its Ag nanocomposite using Juglans regia L. leaf extract and their evaluation as catalysts for reduction of organic pollutants

In this work, an Fe₃ O₄ /HZSM‐5 nanocomposite was synthesised in the presence of Juglans regia L. leaf extract. Then, silver nanoparticles (Ag NPs) were immobilised on the surface of prepared magnetically recoverable HZSM‐5 using selected extract for reduction of Ag⁺ ions to Ag NPs and their stabilisation on the surface of the nanocomposite. The reduction of Ag⁺ ions occurs at room temperature within a few minutes. Characterisation of the prepared catalysts has been carried out using fourier transform infrared (FT‐IR), X‐ray diffraction, field‐emission scanning electron microscopy (FESEM), energy‐dispersive spectroscopy, Brunauer–Emmett–Teller method, and a vibrating sample magnetometer. According to the FESEM images of the nanocomposites, the average size of the Ag NPs on the Fe₃ O₄ /HZSM‐5 surface was >70 nm. The Ag/Fe₃ O₄ /HZSM‐5 nanocomposite was a highly active catalyst for the reduction of methyl orange and 4‐nitrophenol in aqueous medium. The utilisation of recycled catalyst for three times in the reduction process does not decrease its activity.Inspec keywords: silver, X‐ray chemical analysis, X‐ray diffraction, nanocomposites, reduction (chemical), nanofabrication, nanoparticles, transmission electron microscopy, catalysts, Fourier transform infrared spectra, iron compounds, field emission scanning electron microscopy, zeolites, magnetometry, particle sizeOther keywords: Ag‐Fe₃ O₄ , temperature 293 K to 298 K, green synthesis, catalyst material, 4‐nitrophenol reduction, methyl orange reduction, particle size, vibrating sample magnetometry, Brunauer–Emmett–Teller method, field‐emission scanning electron microscopy, X‐ray diffraction, FT‐IR spectroscopy, silver nanoparticles, Juglans regia L. leaf extract, organic pollutant reduction, magnetically recoverable nanocomposites, energy‐dispersive spectroscopy     

Fabrication and characterisation of super‐paramagnetic responsive PLGA–gelatine–magnetite scaffolds with the unidirectional porous structure: a physicochemical,mechanical, and in vitro evaluation

Architecture and composition of Scaffolds are influential factors in the regeneration of defects. Herein, synthesised iron oxide (magnetite) nanoparticles (MNPs) by co‐precipitation technique were evenly distributed in polylactic‐co‐glycolic acid (PLGA)–gelatine Scaffolds. Hybrid structures were fabricated by freeze‐casting method to the creation of a matrix with tunable pores. The synthesised MNPs were characterised by transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction spectroscopy, and vibrating sample magnetometer analysis. Scanning electron microscopy micrographs of porous Scaffolds confirmed the formation of unidirectional microstructure, so that pore size measurement indicated the orientation of pores in the direction of solvent solidification. The addition of MNPs to the PLGA–gelatine Scaffolds had no particular effect on the morphology of the pores, but reduced slightly pore size distribution. The MNPs contained constructs demonstrated increased mechanical strength, but a reduced absorption capacity and biodegradation ratio. Stability of the MNPs and lack of iron release was the point of strength in this investigation and were determined by atomic absorption spectroscopy. The evolution of rat bone marrow mesenchymal stem cells performance on the hybrid structure under a static magnetic field indicated the potential of super‐paramagnetic constructs for further pre‐clinical and clinical studies in the field of neural regeneration.Inspec keywords: transmission electron microscopy, biodegradable materials, nanofabrication, freezing, mechanical strength, tissue engineering, X‐ray diffraction, cellular biophysics, precipitation (physical chemistry), biomedical materials, iron compounds, porosity, scanning electron microscopy, atomic absorption spectroscopy, gelatin, nanoparticles, porous materials, bone, nanocomposites, Fourier transform infrared spectraOther keywords: unidirectional microstructure, pore size measurement, mechanical strength, atomic absorption spectroscopy, hybrid structure, super‐paramagnetic responsive PLGA–gelatine–magnetite scaffolds, unidirectional porous structure, tissue engineering Scaffolds, co‐precipitation technique, polylactic‐co‐glycolic acid–gelatine Scaffolds, freeze‐casting method, transmission electron microscopy, Fourier‐transform infrared spectroscopy, X‐ray diffraction spectroscopy, scanning electron microscopy micrographs, pore size distribution, absorption capacity, iron oxide nanoparticles, Fe₃ O₄      

Functionalisation of Fe3 O4 nanoparticles by 2‐((pyrazol‐4‐yl) methylene) hydrazinecarbothioamide enhances the apoptosis of human breast cancer MCF‐7 cells

Cancer is a major cause of death. Thus, the incidence and mortality rate of cancer is globally important. Regarding vast problems caused by chemotherapy drugs, efforts have progressed to find new anti‐cancer drugs. Pyrazole derivatives are known as components with anti‐cancer properties. In here, Fe₃ O₄ nanoparticles were first functionalized with (3‐chloropropyl) trimethoxysilane, then 2‐((pyrazol‐4‐yl) methylene) hydrazinecarbothioamide (P) was anchored on the surface of magnetic nanoparticles (PL). The synthesized nano‐compounds were characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, Zeta potential, dynamic light scattering, and energy‐dispersive x‐ray spectrometry analyses. The cytotoxicity effect was evaluated using MTT assay, apoptosis test by Flow cytometry, cell cycle analysis, Caspase‐3 activity assay and Hoechst staining on MCF‐7 cell line. The high toxicity for tumor cells and low toxicity on normal cells (MCF10A) was considered as an important feature (selectivity index, 10.9). Based on results, the IC50 for P and PL compounds were 157.80 and 131.84 μM/ml respectively. Moreover, apoptosis inducing, nuclear fragmentation, Caspase 3 activity and induction of cell rest in sub‐G1 and S phases, were also observed. The inhibitory effect of PL was significantly higher than P, which could be due to the high penetrability of Fe₃ O₄ nanoparticles.Inspec keywords: magnetic particles, drugs, nanomedicine, biochemistry, cancer, light scattering, scanning electron microscopy, molecular biophysics, iron compounds, electrokinetic effects, nanofabrication, tumours, X‐ray diffraction, cellular biophysics, nanoparticles, biomedical materials, toxicology, nanomagnetics, Fourier transform infrared spectra, enzymes, X‐ray chemical analysisOther keywords: anticancer properties, Fe₃ O₄ magnetic nanoparticles, (3‐chloropropyl) trimethoxysilane, energy‐dispersive X‐ray spectrometry, cell cycle analysis, MCF‐7 cell line, tumour cells, human breast cancer MCF‐7 cells, mortality rate, pyrazole derivatives, 2‐((pyrazol‐4‐yl) methylene) hydrazinecarbothioamide, chemotherapy drugs, heterocyclic components, nanocompounds, X‐ray diffraction, scanning electron microscopy, Zeta potential, dynamic light scattering, cytotoxicity effect, MTT assay, apoptosis test, caspase‐3 activity assay, Hoechst staining, MCF10A nontumourigenic cells, cell rest induction, nuclear fragmentation, Fe₃ O₄      

Honokiol–camptothecin loaded graphene oxide nanoparticle towards combinatorial anti‐cancer drug delivery

Honokiol (HK) is a natural product isolated from the bark, cones, seeds and leaves of plants belonging to the genus Magnolia. It possesses anti‐cancer activity which can efficiently impede the growth and bring about apoptosis of a diversity of cancer cells. The major concerns of using HK are its poor solubility and lack of targeted drug delivery. In this study, a combinatorial drug is prepared by combining HK and camptothecin (CPT). Both CPT and HK belong to the Magnolian genus and induce apoptosis by cell cycle arrest at the S‐phase and G1 phase, respectively. The combinatorial drug thus synthesised was loaded onto a chitosan functionalised graphene oxide nanoparticles, predecorated with folic acid for site‐specific drug delivery. The CPT drug‐loaded nanocarrier was characterised by X‐ray diffractometer, scanning electron microscope, transmission electron microscope, UV–vis spectroscopy and fluorescence spectroscopy, atomic force microscopy. The antioxidant properties, haemolytic activity and anti‐inflammatory activities were analysed. The cellular toxicity was analysed by 3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐Diphenyltetrazolium Bromide (MTT assay) and Sulforhodamine B (SRB) assay against breast cancer (MCF‐7) cell lines.Inspec keywords: nanofabrication, cancer, nanoparticles, atomic force microscopy, graphene, scanning electron microscopy, cellular biophysics, toxicology, transmission electron microscopy, drug delivery systems, nanomedicine, tumours, solubilityOther keywords: targeted drug delivery, combinatorial drug, Magnolian genus, apoptosis, cell cycle, chitosan functionalised graphene oxide nanoparticles, site‐specific drug delivery, CPT drug‐loaded nanocarrier, transmission electron microscope, fluorescence spectroscopy, haemolytic activity, antiinflammatory activities, breast cancer cell lines, honokiol–camptothecin loaded graphene oxide nanoparticle, combinatorial anti‐cancer drug delivery, natural product, genus Magnolia, anticancer activity, cancer cells     

Development of surface engineered mesoporous alumina nanoparticles: drug release aspects and cytotoxicity assessment

The present investigation deals with successful synthesis and surface functionalisation of mesoporous alumina (MeAl) nanoparticles by simplified sol–gel method using cetyl trimethyl ammonium bromide (CTAB) and pluronic as a template. Surface functionalisation of MeAl was performed to determine the selectivity of surface groups for coupling with model drug molecule. Repaglinide a BCS class II drug was loaded as a model drug on synthesised MeAl nanoparticle and studied for its sustained release capability. The synthesised and repaglinide loaded MeAl nanoparticles were characterised by Fourier transform infrared Spectroscopy, X‐ray diffraction, field emission scanning electron microscopy with EDAX, Transmission electron microscopy and differential scanning calorimetric. Results from the dissolution study confirmed the sustained release behaviour of the nanparticles which was up to 24 h. The cell viability assay demonstrated that 0.2 to 1 mg/ml concentration of MeAl was significantly less cytotoxic to the Chinese Hamster Ovary (CHO) cells. The authors’ experimental studies suggest that MeAl can be used as drug carrier and have a potential to increase the stability, loading efficiency and patient compliance for poorly water‐soluble drugs such as repaglinide.Inspec keywords: mesoporous materials, nanoparticles, nanomedicine, alumina, surface chemistry, cellular biophysics, toxicology, sol‐gel processing, Fourier transform infrared spectra, field emission electron microscopy, X‐ray chemical analysis, transmission electron microscopy, drug delivery systemsOther keywords: surface engineered mesoporous alumina nanoparticles, drug release aspects, cytotoxicity assessment, surface functionalisation, sol–gel method, cetyl trimethyl ammonium bromide, CTAB, pluronic, MeAl, model drug molecule, repaglinide, BCS class II drug, Fourier transform infrared spectroscopy, X‐ray diffraction, field emission scanning electron microscopy, EDAX, transmission electron microscopy, differential scanning calorimetry, cell viability assay, Chinese Hamster Ovary cells, drug carrier, poorly water‐soluble drugs, Al₂ O₃      

Methanobactin‐mediated synthesis of bimetallic Au–Pd/Al2 O3 toward an efficient catalyst for glucose oxidation

A green bioreductive approach with methanobactin was adopted to fabricate bimetallic Au–Pd/Al₂ O₃ catalysts for solvent‐free oxidation of glucose to gluconic acid with H₂ O₂ at atmospheric pressure. The catalyst was characterised by diffuse reflectance UV–vis spectroscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy, and X‐ray diffraction techniques to understand synergistic interactions between Au and Pd. Effects of Au to Pd molar ratio on the catalytic activity of Au–Pd/Al₂ O₃ were investigated. The Au–Pd/Al₂ O₃ catalyst with Au/Pd molar ratio of 0.8:0.2 exhibited excellent catalytic performance. With the catalyst, the oxidation activities of glucose to gluconic acid 2856 mmol min⁻¹ g⁻¹ and selectivity 99.6% were attained at 323 K with H₂ O₂. The results indicated the activity and selectivity was affected by the ratio of Au/Pd on the Al₂ O₃. The formation of Au_0.8 Pd_0.2 /Al₂ O₃ was favourable for the catalytic reaction.Inspec keywords: sugar, oxidation, biochemistry, gold, lead, aluminium compounds, catalysts, X‐ray diffraction, ultraviolet spectra, X‐ray photoelectron spectra, transmission electron microscopy, visible spectra, catalysis, biological techniquesOther keywords: bimetallic Au‐Pd‐Al₂ O₃ methanobactin‐mediated synthesis, glucose oxidation, green bioreductive approach, bimetallic Au‐Pd‐Al₂ O₃ catalysts, glucose solvent‐free oxidation, gluconic acid, Au‐to‐Pd molar ratio, catalytic reaction, X‐ray diffraction, X‐ray photoelectron spectroscopy, transmission electron microscopy, diffuse reflectance UV‐vis spectroscopy, temperature 323 K, Au‐Pd‐Al₂ O₃      

Solvothermal‐assisted green synthesis of hybrid Chi‐Fe3 O4 nanocomposites: a potential antibacterial and antibiofilm material

In this present study, a hybrid Chi‐Fe₃ O₄ was prepared, characterised and evaluated for its antibacterial and antibiofilm potential against Staphylococcus aureus and Staphylococcus marcescens bacterial pathogens. Intense peak around 260 nm in the ultraviolet–visible spectrum specify the formation of magnetite nanoparticles. Spherical‐shaped particles with less agglomeration and particle size distribution of 3.78–46.40 nm were observed using transmission electron microscopy analysis and strong interaction of chitosan with the surface of magnetite nanoparticles was studied using field emission scanning microscopy (FESEM). X‐ray diffraction analysis exhibited the polycrystalline and spinel structure configuration of the nanocomposite. Presence of Fe and O, C and Cl elements were confirmed using energy dispersive X‐ray microanalysis. Fourier transform infrared spectroscopic analysis showed the reduction and formation of Chi‐Fe₃ O₄ nanocomposite. The antibacterial activity by deformation of the bacterial cell walls on treatment with Chi‐Fe₃ O₄ nanocomposite and its interaction was visualised using FESEM and the antibiofilm activity was determined using antibiofilm assay. In conclusion, this present study shows the green synthesis of Chi‐Fe₃ O₄ nanocomposite and evaluation of its antibacterial and antibiofilm potential, proving its significance in medical and biological applicationsInspec keywords: visible spectra, particle size, magnetic particles, nanocomposites, nanoparticles, X‐ray diffraction, nanofabrication, transmission electron microscopy, X‐ray chemical analysis, nanomagnetics, microorganisms, antibacterial activity, iron compounds, ultraviolet spectra, biomedical materials, field emission scanning electron microscopy, Fourier transform infrared spectra, filled polymers, crystal growth from solution, polymer structureOther keywords: potential antibacterial material, antibiofilm potential, magnetite nanoparticles, solvothermal‐assisted green synthesis, hybrid Chi‐Fe₃ O₄ nanocomposites, staphylococcus aureus, staphylococcus marcescens, bacterial pathogens, ultraviolet–visible spectrum, spherical‐shaped particles, particle size, transmission electron microscopy, FESEM, field emission scanning electron microscopy, X‐ray diffraction, spinel structure, polycrystalline structure, energy dispersive X‐ray microanalysis, Fourier transform infrared spectroscopic analysis, deformation, bacterial cell walls, Fe₃ O₄      

Rapid synthesis of Bi 2 O 3 nano‐needles via ‘green route’ and evaluation of its anti‐fungal activity

Here, the authors report a rapid, simple, and eco‐friendly process for synthesis of Bi₂ O₃ nano‐needles. Dioscorea alata tuber extract was used as both reducing and capping agent for the first time. These nanoparticles were characterised by X‐ray diffraction, field emission scanning electron microscope, and Fourier transform infrared (FTIR) spectrometry, the nano‐structured Bi₂ O₃ needles have an average diameter of 158 nm with the lengths in the range of 1–3 μm. CLSI M27‐A2 standard was followed for evaluation of anti‐fungal activity. Bi₂ O₃ nano‐needles show remarkable activity against Candida albicans. It exhibits four time greater activity than bulk Bi₂ O₃ powder and two time greater activity than itraconazole, which makes it a potent anti‐fungal drug.Inspec keywords: bismuth compounds, nanoparticles, X‐ray diffraction, field emission scanning electron microscopy, Fourier transform infrared spectra, drugs, nanomedicine, biomedical materials, nanofabricationOther keywords: nanoneedles, antifungal activity, nanoparticles, X‐ray diffraction, field emission scanning electron microscope, Fourier transform infrared spectrometry, CLSI M27‐A2 standard, Candida albicans, itraconazole, antifungal drug, Bi₂ O₃      

Synthesis,characterisation and potential biomedical applications of magnetic core–shell structures: carbon‐, dextran‐, SiO2 ‐ and ZnO‐coated Fe3 O4 nanoparticles

Due to the strong effect of nanoparticles'' size and surface properties on cellular uptake and bio‐distribution, the selection of coating material for magnetic core–shell nanoparticles (CSNPs) is very important. In this study, the effects of four different biocompatible coating materials on the physical properties of Fe₃ O₄ (magnetite) nanoparticles (NPs) for different biomedical applications are investigated and compared. In this regard, magnetite NPs are prepared by a simple co‐precipitation method. Then, CSNPs including Fe₃ O₄ as a core and carbon, dextran, ZnO (zincite) and SiO₂ (silica) as different shells are synthesised using simple one‐ or two‐step methods. A comprehensive study is carried out on the prepared samples using X‐ray diffraction, vibrating sample magnetometry, transmission electron microscopy and Fourier transform infrared spectroscopy analyses. According to the authors'' findings, it is suggested that carbon‐ and dextran‐coated magnetite NPs with high M _s have great potential in the application of magnetic resonance imaging contrast agents. Moreover, silica‐coated magnetite NPs with high coercivity are potentially suitable candidates for hyperthermia and ZnO‐coated Fe₃ O₄ is potentially suitable for photothermal therapy.Inspec keywords: iron compounds, carbon, silicon compounds, zinc compounds, nanomedicine, biomedical materials, nanofabrication, nanoparticles, magnetic particles, coatings, X‐ray diffraction, magnetometry, transmission electron microscopy, Fourier transform spectra, infrared spectra, biomedical MRI, hyperthermia, radiation therapyOther keywords: biomedical applications, magnetic core‐shell nanoparticles, CSNP, cellular uptake, biodistribution, coating material, biocompatible coating materials, co‐precipitation, dextran, zincite, silica, X‐ray diffraction, vibrating sample magnetometry, transmission electron microscopy, Fourier transform infrared spectroscopy, magnetic resonance imaging contrast agents, hyperthermia, photothermal therapy, SiO₂ ‐Fe₃ O₄ , ZnO‐Fe₃ O₄      

Synthesis and characterisation of novel biopolymer stabilised organic Pt‐nanocomposite: assessment of its antioxidant and antitumour properties

Green synthesis of organic Pt‐nanocomposite was accomplished using carboplatin as a precursor and novel biopolymer – gum kondagogu (GK) as a reducing agent. The synthesised GK stabilised organic Pt‐nanocomposite (GKCPt NC) was characterised by different analytical techniques such as ultraviolet–visible spectroscopy, nanoparticle analyser, scanning electron microscopy and energy dispersive X‐ray analysis, X‐ray diffraction (XRD), Fourier‐transform infrared spectroscopy, transmission electron microscopy (TEM), X‐ray photoelectron spectroscopy (XPS) and inductively coupled plasma optical emission spectrophotometer. The XRD pattern established the amorphous nature of GKCPt NC. TEM analysis revealed the homogeneous, monodisperse and spherical nature, with Pt metal size of 3.08 ± 0.62 nm. The binding energy at 71.2 and 74.6 eV show the presence of metallic platinum, Pt(0) confirmed by XPS studies. Further, in vitro radical scavenging and antitumour activity of GKCPt NC have been investigated. In comparison to GK and carboplatin, GKCPt NC showed superior 1, 1‐diphenyl‐2‐picrylhydrazyle activity of 87.82%, whereas 2, 2‐azinobis‐(3‐ethylbenzthinzoline‐6‐sulphonic acid) activity was 38.50%, respectively. In vitro studies of the antitumour property of GK, GKCPt NC and carboplatin were evaluated by potato disc tumour bioassay model. The efficacy of synthesised GKCPt NC concentration (IC₅₀) on tumour inhibition was found to be 2.04‐fold lower as compared to carboplatin. Overall, the synthesised GKCPt NC shows both antitumour and antioxidant properties when compared to the original drug – carboplatin and might have promising applications in cancer therapy.Inspec keywords: nanoparticles, tumours, ultraviolet spectra, drugs, free radical reactions, X‐ray photoelectron spectra, platinum, nanocomposites, X‐ray diffraction, visible spectra, X‐ray chemical analysis, nanofabrication, transmission electron microscopy, scanning electron microscopy, cancer, polymer structure, filled polymers, Fourier transform infrared spectra, binding energy, drug delivery systems, nanomedicineOther keywords: antioxidant properties, green synthesis, ultraviolet–visible spectroscopy, energy dispersive X‐ray analysis, X‐ray diffraction, Fourier‐transform infrared spectroscopy, transmission electron microscopy, inductively coupled plasma optical emission spectrophotometry, antitumour activity, carboplatin precursor, biopolymer gum kondagogu stabilised organic Pt‐nanocomposite, reducing agent, different analytical techniques, scanning electron microscopy, X‐ray photoelectron spectroscopy, homogeneous particles, binding energy, in vitro radical scavenging, 1,1‐diphenyl‐2‐picrylhydrazyle activity, 2, 2‐azinobis‐(3‐ethylbenzthinzoline‐6‐sulphonic acid) activity, tumour inhibition, Pt     

Modification of rheological and filtration characteristics of water‐based mud for drilling oil and gas wells using green SiO2 @ZnO@Xanthan nanocomposite

In this study, a green, simple and economical approach was used to synthesise the SiO₂ @ZnO@Xanthan nanocomposite (NC) to modify the rheological and filtration characteristics of the water‐based drilling mud. The green synthesised NCs were identified using scanning electron microscopy, energy dispersive X‐ray spectroscopy, elemental mapping, X‐ray diffraction and UV–Vis analytical techniques. Additionally, the effect of SiO₂ @ZnO@Xanthan NCs on the filtration and rheological properties of mud including apparent viscosity, plastic viscosity, yield point, gel strength, mud cake and fluid loss was investigated. The obtained results confirmed that the synthesised NCs effectively improved the rheological properties of drilling mud, and considerably decreased its fluid loss and filter cake by about 54 and 92.5%, respectively. The results highly recommend the SiO₂ @ZnO@Xanthan NC as an excellent additive to improve the rheological properties, and reduce the fluid loss and the filter cake of the drilling mud.Inspec keywords: X‐ray diffraction, scanning electron microscopy, nanofabrication, additives, nanocomposites, X‐ray chemical analysis, drilling (geotechnical), yield point, rheology, filtration, industrial economics, silicon compounds, zinc compounds, ultraviolet spectra, visible spectra, nanofluidics, gelsOther keywords: rheological properties, fluid loss, drilling mud, filtration characteristics, water‐based mud, green approach, economical approach, X‐ray spectroscopy, mud cake, apparent viscosity, oil‐gas wells, nanocomposite synthesis, scanning electron microscopy, energy dispersive X‐ray spectroscopy, elemental mapping, X‐ray diffraction, Uv–Vis spectroscopy, plastic viscosity, yield point, gel strength, additive, SiO₂ , ZnO     

Low‐temperature synthesis of hierarchical structures of copper oxide and their superior biological activity

In this work, the authors report a facile low‐temperature wet‐chemical route to prepare morphology‐tailored hierarchical structures (HS) of copper oxide. The preparation of copper oxide collides was carried out using varying concentrations of copper acetate and a reducing agent at a constant temperature of 50°C. The prepared HS of CuO were characterised by powdered X‐rays diffraction that indicates phase pure having monoclinic structures. The morphology was further confirmed by field‐emission scanning electron microscope. It reveals a difference in shape and size of copper oxide HS by changing the concentration of reactants. In order to evaluate the effect of H₂ O₂ on CuO NPs, the prepared CuO are modified by treatment with H₂ O₂. In general trend, CuOH₂ O₂ collide showed enhanced protein kinase inhibition, antibacterial (maximum zone 16.34 mm against Staphylococcus aureus) and antifungal activities in comparison to unmodified CuO collides. These results reveal that CuO HS exhibit antimicrobial properties and can be used as a potential candidate in pharmaceutical industries.Inspec keywords: molecular biophysics, antibacterial activity, X‐ray diffraction, microorganisms, copper compounds, nanofabrication, nanoparticles, narrow band gap semiconductors, field emission scanning electron microscopy, enzymes, nanomedicine, particle size, semiconductor growthOther keywords: unmodified CuO collides, low‐temperature synthesis, morphology‐tailored hierarchical structures, copper acetate, reducing agent, monoclinic structures, copper oxide HS, CuO NPs, Staphylococcus aureus, biological activity, copper oxide, powdered X‐ray diffraction, field‐emission scanning electron microscopy, facile low‐temperature wet‐chemical method, protein kinase inhibition, antibacterial activity, antifungal activity, antimicrobial properties, pharmaceutical industries, temperature 50.0 degC, CuO     

Biosynthesis of γ ‐Fe2 O3 @CuO core–shell nanoclusters using aqueous extract of Sesbania grandiflora Linn fresh leaves,its characterisation,and antimicrobial activity studies against Staphylococcus aureus strains

The present study reports an eco‐friendly and rapid method for the synthesis of core–shell nanoclusters using the modified reverse micelle method. It is a green synthetic method which uses Sesbania grandiflora Linn extract which acts as a reducing and capping agent. It is observed that this method is very fast and convenient and the nanoclusters are formed with 5–10 min of the reaction time without using harsh conditions. The core–shell nanoclusters so prepared were characterised using UV–Vis spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy. Further, their effective antibacterial activity towards the gram‐positive bacteria Staphylococcus aureus was found to be due to their smaller particle size.Inspec keywords: iron compounds, copper compounds, nanoparticles, particle size, nanofabrication, nanomedicine, biomedical materials, core‐shell nanostructures, antibacterial activity, ultraviolet spectra, visible spectra, microorganisms, reduction (chemical), scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectraOther keywords: biosynthesis, γ‐Fe₂ O₃ ‐CuO core‐shell nanoclusters, aqueous extract, Sesbania grandiflora Linn fresh leaves, antimicrobial activity, Staphylococcus aureus strains, eco‐friendly method, modified reverse micelle method, green synthetic method, reducing agent, capping agent, UV‐visible spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, antibacterial activity, gram‐positive bacteria Staphylococcus aureus, particle size, time 5 min to 10 min, Fe₂ O₃ ‐CuO