Colorimetric‐based detection of Ureaplasma urealyticum using gold nanoparticles

Ureaplasma urealyticum (uu) is one of the most common agents of urogenital infections and is associated with complications such as infertility, spontaneous abortion and other sexually transmitted diseases. Here, a DNA sensor based on oligonucleotide target‐specific gold nanoparticles (AuNPs) was developed, in which the dispersed and aggregated states of oligonucleotide‐functionalised AuNPs were optimised for the colorimetric detection of a polymerase chain reaction (PCR) amplicon of U. urealyticum DNA. A non‐cross‐linking approach utilising a single Au‐nanoprobe specific of the urease gene was utilised and the effect of a PCR product concentration gradient evaluated. Results from both visual and spectral analyses showed that target–Au‐nanoprobe hybrids were stable against aggregation after adding the inducer. Furthermore, when a non‐target PCR product was used, the peak position shifted and salt‐induced aggregation occurred. The assay''s limit of detection of the assay was 10 ng with a dynamic range of 10–60 ng. This procedure provides a rapid, facile and low‐cost detection format, compared to methods currently used for the identification of U. urealyticum.Inspec keywords: patient diagnosis, diseases, enzymes, nanosensors, microorganisms, molecular biophysics, DNA, nanoparticles, aggregation, cellular biophysics, colorimetry, genetics, gold, nanomedicineOther keywords: urogenital infections, infertility, spontaneous abortion, sexually transmitted diseases, DNA sensor, oligonucleotide target‐specific gold nanoparticles, oligonucleotide‐functionalised AuNPs, colorimetric detection, polymerase chain reaction amplicon, noncross‐linking approach, single Au‐nanoprobe specific, urease gene, visual analyses, spectral analyses, target–Au‐nanoprobe hybrids, nontarget PCR product, salt‐induced aggregation, rapid cost detection format, facile cost detection format, low‐cost detection format, PCR product concentration, Ureaplasma urealyticum DNA, Au     

Cross‐linking gold nanoparticles aggregation method based on localised surface plasmon resonance for quantitative detection of miR‐155

MiR‐155 plays a critical role in the formation of cancers and other diseases. In this study, the authors aimed to design and fabricate a biosensor based on cross‐linking gold nanoparticles (AuNPs) aggregation for the detection and quantification of miR‐155. Also, they intended to compare this method with SYBR Green real‐time polymerase chain reaction (PCR). Primers for real‐time PCR, and two thiolated capture probes for biosensor, complementary with miR‐155, were designed. Citrate capped AuNPs (18.7 ± 3.6 nm) were synthesised and thiolated capture probes immobilised to AuNPs. The various concentrations of synthetic miR‐155 were measured by this biosensor and real‐time PCR method. Colorimetric changes were studied, and the calibration curves were plotted. Results showed the detection limit of 10 nM for the fabricated biosensor and real‐time PCR. Also, eye detection using colour showed the weaker detection limit (1 µM), for this biosensor. MiR‐133b as the non‐complementary target could not cause a change in both colour and UV–visible spectrum. The increase in hydrodynamic diameter and negative zeta potential of AuNPs after the addition of probes verified the biosensor accurately fabricated. This fabricated biosensor could detect miR‐155 simpler and faster than previous methods.Inspec keywords: RNA, molecular biophysics, biochemistry, cancer, nanoparticles, gold, aggregation, surface plasmon resonance, molecular configurations, nanosensors, enzymes, calibration, ultraviolet spectra, visible spectra, eye, hydrodynamics, electrokinetic effects, biosensors, nanofabricationOther keywords: cross‐linking gold nanoparticles aggregation method, localised surface plasmon resonance, quantitative detection, cancers, diseases, biosensor, miR‐155 detection, miR‐155 quantification, SYBR green real‐time polymerase chain reaction, thiolated capture probes, citrate capped AuNPs, synthetic miR‐155, real‐time PCR method, colorimetric changes, calibration curves, eye detection, colour, detection limit, MiR‐133b, noncomplementary target, UV‐visible spectrum, hydrodynamic diameter, negative zeta potential, Au     

Green synthesis of silver nanoparticles and their applications as colorimetric probe for determination of Fe3+ and Hg2+ ions

Silver nanoparticles (AgNPs) were prepared by a green method using Cordia myxa leaf extract. They were characterised by UV–vis spectroscopy, Fourier transform infrared spectroscopy and their X‐ray diffraction pattern. Their sizes were determined by scanning electron micrographs, transmission electron micrographs imaging and dynamic light scattering analysis. The shapes of nanoparticles were spherical or truncated triangular and their average size was determined to be 51.6 nm. Their solution was stable at least for one month. The prepared AgNPs were used as a selective chemical sensor for determination of iron(III) (only when Cl⁻ ions were present in the medium) and mercury(II) ions with detection limits of 0.084 and 0.037 nM, respectively. It was shown that the mechanism of these detections is through oxidation of Ag atoms by Fe³⁺ and Hg²⁺ ions.Inspec keywords: visible spectra, nanoparticles, transmission electron microscopy, nanofabrication, ultraviolet spectra, chemical sensors, scanning electron microscopy, silver, X‐ray diffraction, Fourier transform infrared spectra, oxidationOther keywords: Ag, Cordia myxa leaf extract, iron(III) ions, mercury(II) ions, oxidation, scanning electron micrographs, Fourier transform infrared spectroscopy, silver nanoparticles, chemical sensor, dynamic light scattering analysis, transmission electron micrographs, X‐ray diffraction pattern, UV–vis spectroscopy, colorimetric probe, green synthesis     

Foley catheters functionalised with a synergistic combination of antibiotics and silver nanoparticles resist biofilm formation

Foley catheters are inevitable in health care unit. Pathogens colonise and form biofilm on catheter causing catheter‐associated urinary tract infection. Therefore, the authors aimed to functionalise catheter to resist biofilm formation. The authors impregnated urinary catheters with a synergistic combination of antibiotics and silver nanoparticles (SNPs) to evaluate antibiofilm efficacy in vitro and in vivo. SNPs were synthesised using Spirulina platensis. Synergy between the SNPs and antibiotics was determined by the checker‐board method. In vivo efficacy of the functionalised catheters was assessed in mice. Liver and kidney function tests of mice were performed. The in vitro anti‐adherence activity of the functionalised catheters was evaluated after 2 years. Nanoparticle sizes were 42–75 nm. Synergistic activity was observed among SNPs (2 µg/ml), amikacin (6.25 µg/ml), and nitrofurantoin (31.25 µg/ml). In mice, catheters functionalised with combinations of antibiotics and SNPs exhibited no colonisation until Day 14. Blood, liver, and kidney tests were normal. After 2 years, catheters functionalised with antibiotics exhibited 25% inhibition of bacterial adhesion, and catheters functionalised with the nanoparticle‐antibiotic combination exhibited 90% inhibition. Impregnation of urinary catheters with a synergistic combination of antibiotics and SNPs is an efficient and promising method for preventing biofilm formation.Inspec keywords: catheters, drugs, silver, nanoparticles, nanomedicine, liver, kidney, blood, microorganisms, adhesion, biomechanics, cellular biophysicsOther keywords: Foley catheters, synergistic nanoparticle‐antibiotics combination, silver nanoparticles, biofilm formation resitance, health care unit, pathogens, urinary tract infection, SNP, Spirulina platensis, checker‐board method, liver function, kidney function, vitro antiadherence activity, amikacin, nitrofurantoin, blood, bacterial adhesion, size 42 nm to 75 nm, Ag     

Catalytic hydrolysis of cellobiose using different acid‐functionalised Fe3 O4 magnetic nanoparticles

The present study demonstrated the preparation of three different acid‐functionalised magnetic nanoparticles (MNPs) and evaluation for their catalytic efficacy in hydrolysis of cellobiose. Initially, iron oxide (Fe₃ O₄)MNPs were synthesised, which further modified by applying silica coating (Fe₃ O₄ ‐MNPs@Si) and functionalised with alkylsulfonic acid (Fe₃ O₄ ‐MNPs@Si@AS), butylcarboxylic acid (Fe₃ O₄ ‐MNPs@Si@BCOOH) and sulphonic acid (Fe₃ O₄ ‐MNPs@Si@SO₃ H) groups. The Fourier transform infrared analysis confirmed the presence of above‐mentioned acid functional groups on MNPs. Similarly, X‐ray diffraction pattern and energy dispersive X‐ray spectroscopy analysis confirmed the crystalline nature and elemental composition of MNPs, respectively. TEM micrographs showed the synthesis of spherical and polydispersed nanoparticles having diameter size in the range of 20–80 nm. Cellobiose hydrolysis was used as a model reaction to evaluate the catalytic efficacy of acid‐functionalised nanoparticles. A maximum 74.8% cellobiose conversion was reported in case of Fe₃ O₄ ‐MNPs@Si@SO₃ H in first cycle of hydrolysis. Moreover, thus used acid‐functionalised MNPs were magnetically separated and reused. In second cycle of hydrolysis, Fe₃ O₄ ‐MNPs@Si@SO₃ H showed 49.8% cellobiose conversion followed by Fe₃ O₄ ‐MNPs@Si@AS (45%) and Fe₃ O₄ ‐MNPs@Si@BCOOH (18.3%). However, similar pattern was reported in case of third cycle of hydrolysis. The proposed approach is considered as rapid and convenient. Moreover, reuse of acid‐functionalised MNPs makes the process economically viable.Inspec keywords: scanning electron microscopy, catalysis, magnetic separation, magnetic particles, silicon compounds, iron compounds, nanomagnetics, coatings, X‐ray chemical analysis, nanoparticles, X‐ray diffraction, nanofabrication, Fourier transform infrared spectra, organic compounds, nanocompositesOther keywords: catalytic efficacy, alkylsulfonic acid, butylcarboxylic acid, energy dispersive X‐ray spectroscopy analysis, spherical polydispersed nanoparticles, cellobiose hydrolysis, acid‐functionalised MNPs, acid functional groups, cellobiose conversion, acid‐functionalised magnetic nanoparticle, silica coating, sulphonic acid, Fourier transform infrared analysis, SEM micrograph, X‐ray diffraction pattern, size 20.0 nm to 80.0 nm, Fe₃ O₄ , Si, SiO₂      

Preparation and in vitro evaluation of novel cross‐linked chondroitin sulphate nanoparticles by aluminium ions for encapsulation of green tea flavonoids

Chondroitin sulphate is a sulphated glycosaminoglycan biopolymer composed over 100 individual sugars. Chondroitin sulphate nanoparticles (NPs) loaded with catechin were prepared by an ionic gelation method using AlCl₃ and optimised for polymer and cross‐linking agent concentration, curing time and stirring speed. Zeta potential, particle size, loading efficiency, and release efficiency over 24 h (RE₂₄ %) were evaluated. The surface morphology of NPs was investigated by scanning electron microscopy and their thermal behaviour by differential scanning calorimetric. Antioxidant effect of NPs was determined by chelating activity of iron ions. The cell viability of mesenchymal stem cells was determined by 3‐[4, 5‐dimethylthiazol‐2‐yl]‐2, 5‐diphenyl tetrazolium bromide assay and the calcification of osteoblasts was studied by Alizarin red staining. The optimised NPs showed particle size of 176 nm, zeta potential of −20.8 mV, loading efficiency of 93.3% and RE₂₄ % of 80.6%. The chatechin loaded chondroitin sulphate NPs showed 70‐fold more antioxidant activity, 3‐fold proliferation effect and higher calcium precipitation in osteoblasts than free catechin.Inspec keywords: nanoparticles, encapsulation, biomedical materials, particle size, nanofabrication, nanomedicine, electrokinetic effects, cellular biophysics, polymer blends, molecular biophysics, molecular configurations, biochemistry, curing, surface morphology, scanning electron microscopy, differential scanning calorimetry, dyes, precipitationOther keywords: in vitro evaluation, cross‐linked chondroitin sulphate nanoparticles, aluminium ions, nanoparticles, green tea flavonoids, sulphated glycosaminoglycan biopolymer, sugars, catechin, ionic gelation method, cross‐linking agent concentration, curing time, size 176 nm, time 24 h, calcium precipitation, 3‐fold proliferation effect, antioxidant activity, chatechin loaded chondroitin sulphate NPs, Alizarin red staining, osteoblasts, calcification, 3‐[4,5‐dimethylthiazol‐2‐yl]‐2,5‐diphenyl tetrazolium bromide assay, mesenchymal stem cells, cell viability, chelating activity, differential scanning calorimetry, thermal behaviour, scanning electron microscopy, surface morphology, release efficiency, loading efficiency, particle size, zeta potential, stirring speed     

Co‐condensation synthesis of well‐defined mesoporous silica nanoparticles: effect of surface chemical modification on plasmid DNA condensation and transfection

Chemically modified mesoporous silica nanoparticles (MSNs) are of interest due to their chemical and thermal stability with adjustable morphology and porosity; therefore, it was aimed to develop and compare the MCM‐41 MSNs functionalised with imidazole groups (MCM‐41‐Im) to unmodified (MCM‐41‐OH) and primary amine functionalised (MCM‐41‐NH₂) MSNs for experimental gene delivery. The results show efficient transfection of the complexes of the plasmid and either MCM‐41‐NH₂ or MCM‐41‐Im. Furthermore, following transfection of HeLa cells using MCM‐41‐Im, an enhanced GFP expression was achieved consistent with the noticeable DNase1 protection and endosomal escape properties of MCM‐41‐Im using carboxyfluorescein tracer.Inspec keywords: condensation, mesoporous materials, silicon compounds, nanoparticles, DNA, surface chemistry, porosity, gene therapy, cellular biophysics, biomedical materials, nanomedicine, nanofabrication, molecular biophysics, biochemistryOther keywords: co‐condensation synthesis, surface chemical modification, plasmid DNA condensation, plasmid DNA transfection, chemical modified mesoporous silica nanoparticles, chemical stability, thermal stability, adjustable morphology, porosity, MCM‐41 MSN functionalisation, imidazole groups, MCM‐41‐OH, primary amine functionalised MSN, gene delivery, HeLa cell transfection, GFP expression, DNase1 protection, endosomal escape properties, carboxyfluorescein tracer, SiO₂      

Fabrication of cellulose nanoparticles through electrospraying

This study reports the fabrication of cellulose nanoparticles through electrospraying the solution of cellulose in N,N ‐dimethylacetamide/lithium chloride solvent as well as investigating the effect of electrospraying conditions and molecular weight on the average size of electrosprayed nanoparticles. Electrospraying of cellulose was carried out with the following range for each factor, namely concentration = 1–3 wt%, voltage = 15–23 kV, nozzle–collector distance = 10–25 cm, and feed rate = 0.03–0.0875 ml/h. The smallest nanoparticles had an average size of around 40 nm. Results showed that lowering the solution concentration and feed rate, as well as increasing the nozzle–collector distance and applied voltage led to a decrease in the average size of the electrosprayed cellulose nanoparticles. Fourier transform infrared analysis proved that no chemical change had occurred in the cellulose structure after the electrospraying process. According to X‐ray diffraction (XRD) results, cellulose nanoparticles showed a lower degree of crystallinity in comparison with the raw cellulose powder. XRD results also proved the absence of LiCl salt in the electrosprayed nanoparticles.Inspec keywords: polymers, nanoparticles, nanofabrication, spraying, molecular weight, particle size, Fourier transform infrared spectra, X‐ray diffraction, polymer structureOther keywords: cellulose nanoparticles, electrospraying, N,N‐dimethylacetamide‐lithium chloride solvent, molecular weight, solution concentration, feed rate, nozzle‐collector distance, Fourier transform infrared analysis, X‐ray diffraction, XRD, crystallinity, cellulose powder, voltage 15 kV to 23 kV     

Enhanced wound healing activity of Ag–ZnO composite NPs in Wistar Albino rats

In the present study, silver (Ag) and Ag–zinc oxide (ZnO) composite nanoparticles (NPs) were synthesised and studied their wound‐healing efficacy on rat model. Ultraviolet–visible spectroscopy of AgNPs displayed an intense surface plasmon (SP) resonance absorption at 450 nm. After the addition of aqueous Zn acetate solution, SP resonance band has shown at 413.2 nm indicating a distinct blue shift of about 37 nm. X‐ray diffraction analysis Ag–ZnO composite NPs displayed existence of two mixed sets of diffraction peaks, i.e. both Ag and ZnO, whereas AgNPs exhibited face‐centred cubic structures of metallic Ag. Scanning electron microscope (EM) and transmission EM analyses of Ag–ZnO composite NPs revealed the morphology to be monodispersed hexagonal and quasi‐hexagonal NPs with distribution of particle size of 20–40 nm. Furthermore, the authors investigated the wound‐healing properties of Ag–ZnO composite NPs in an animal model and found that rapid healing within 10 days when compared with pure AgNPs and standard drug dermazin.Inspec keywords: wounds, tissue engineering, biomedical materials, nanocomposites, nanofabrication, nanomedicine, silver, zinc compounds, II‐VI semiconductors, wide band gap semiconductors, ultraviolet spectra, visible spectra, nanoparticles, particle size, surface plasmon resonance, spectral line shift, X‐ray diffraction, scanning electron microscopy, transmission electron microscopyOther keywords: enhanced wound healing activity, Ag‐ZnO composite nanoparticles, Wistar Albino rats, wound‐healing efficacy, ultraviolet‐visible spectroscopy, intense surface plasmon resonance absorption, aqueous Zn acetate solution, SP resonance band, blue shift, X‐ray diffraction analysis, diffraction peaks, face‐centred cubic structures, scanning electron microscope, SEM, transmission electron microscope, TEM, monodispersed hexagonal nanoparticles, quasihexagonal nanoparticles, particle size, animal model, time 10 d, size 20 nm to 40 nm, Ag‐ZnO     

Magnetic soy protein isolate–bovine serum albumin nanoparticles preparation as a carrier for inulinase immobilisation

Magnetic nanoparticles (NPs) were functionalised with soy protein isolate (SPI) and bovine serum albumin (BSA) for inulinase immobilisation. The results revealed the nanomagnetite size of about 50 nm with a polydispersity index (PDI) of 0.242. The average size of the SPI NPs prepared by using acetone was 80–90 nm (PDI, 0.277), and SPI–BSA NPs was 80–90 nm (PDI, 0.233), and their zeta potential was around −34 mV. The mean diameter of fabricated Fe₃ O₄ @SPI–BSA NPs was <120 nm (PDI, 0.187). Inulinase was covalently immobilised successfully through glutaraldehyde on Fe₃ O₄ @SPI–BSA NPs with 80% enzyme loading. Fourier transform infrared spectra, field emission scanning electron microscopy, and transmission electron microscopy images provided sufficient proof for enzyme immobilisation on the NPs. The immobilised inulinase showed maximal activity at 45°C, which was 5°C higher than the optimum temperature of the free enzyme. Also, the optimum pH of the immobilised enzyme was shifted from 6 to 5.5. Thermal stability of the enzyme was considerably increased to about 43% at 75°C, and K _m value was reduced to 25.4% after immobilisation. The half‐life of the enzyme increased about 5.13‐fold at 75°C as compared with the free form. Immobilised inulinase retained over 80% of its activity after ten cycles.Inspec keywords: magnetic particles, nanoparticles, proteins, molecular biophysics, nanofabrication, enzymes, Fourier transform spectra, infrared spectra, scanning electron microscopy, field emission ion microscopy, transmission electron microscopy, pH, biochemistry, nanobiotechnology, biomagnetism, electrokinetic effects, iron compoundsOther keywords: magnetic nanoparticles, soy protein isolate, bovine serum albumin, inulinase immobilisation, nanomagnetite, polydispersity index, SPI‐BSA NP, zeta potential, inulinase, glutaraldehyde, enzyme loading, Fourier transform infrared spectra, field emission scanning electron microscopy, transmission electron microscopy images, enzyme immobilisation, pH, size 80 nm to 90 nm, temperature 45 degC, temperature 75 degC, Fe₃ O₄      

Fluorescein isothiocyanate‐dyed mesoporous silica nanoparticles for tracking antioxidant delivery

This study investigated the cellular uptake of fluorescein isothiocyanate‐labelled mesoporous silica nanoparticles (FITC‐MSNs), amine‐functionalised FITC‐MSNs (AP‐FITC‐MSNs) and their gallic acid (GA)‐loaded counterparts. Mesoporous silica nanoparticles were labelled with fluorescein isothiocyanate, functionalised by 3‐aminopropyltriethoxysilane (APTES) (AP‐FITC‐MSNs) and then loaded by GA. All nanoparticles were characterised by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy, and X‐ray diffraction. The cytotoxicity of different concentrations of dyed nanoparticles was investigated using (3‐(4,5‐trihydroxybenzoic acid, dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide) assay and flow cytometry. TEM images showed that the average particle sizes of FITC‐MSNs and AP‐FITC‐MSNs were about 100 and 110 nm, respectively. These nanoparticles were internalised by Caco‐2 cells, accumulated and dispersed into the cytoplasm, nucleus, and subcellular organelles. Nanoparticles containing GA clearly decreased the viability of cells. FITC‐MSNs showed no toxicity on Caco‐2 cells at concentrations of ≤50 µg/ml. Functionalisation of FITC‐MSNs using APTES decreased toxicity effects on the cells. It was found that FITC‐MSNs can be applied at low concentrations as a marker in the cells. In addition, AP‐FITC‐MSNs showed better biocompatibility with Caco‐2 cells than FITC‐MSNs, because of their positive surface charges.Inspec keywords: mesoporous materials, porosity, nanoparticles, dyes, silicon compounds, nanocomposites, nanofabrication, nanomedicine, cellular biophysics, molecular biophysics, biochemistry, transmission electron microscopy, Fourier transform infrared spectra, X‐ray diffraction, toxicology, particle size, biomedical materials, surface charging, cancerOther keywords: fluorescein isothiocyanate‐dyed mesoporous silica nanoparticles, antioxidant delivery tracking, cellular uptake, amine‐functionalised FITC‐MSNs, gallic acid‐loaded counterparts, 3‐aminopropyltriethoxysilane, transmission electron microscopy, TEM, Fourier transform infrared spectroscopy, X‐ray diffraction, cytotoxicity, dyed nanoparticles, (3‐(4,5‐trihydroxybenzoic acid‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide) assay, flow cytometry, particle sizes, AP‐FITC‐MSNs, Caco‐2 cells, cytoplasm, subcellular organelles, cell viability, biocompatibility, positive surface charges, SiO₂      

Honokiol–camptothecin loaded graphene oxide nanoparticle towards combinatorial anti‐cancer drug delivery

Honokiol (HK) is a natural product isolated from the bark, cones, seeds and leaves of plants belonging to the genus Magnolia. It possesses anti‐cancer activity which can efficiently impede the growth and bring about apoptosis of a diversity of cancer cells. The major concerns of using HK are its poor solubility and lack of targeted drug delivery. In this study, a combinatorial drug is prepared by combining HK and camptothecin (CPT). Both CPT and HK belong to the Magnolian genus and induce apoptosis by cell cycle arrest at the S‐phase and G1 phase, respectively. The combinatorial drug thus synthesised was loaded onto a chitosan functionalised graphene oxide nanoparticles, predecorated with folic acid for site‐specific drug delivery. The CPT drug‐loaded nanocarrier was characterised by X‐ray diffractometer, scanning electron microscope, transmission electron microscope, UV–vis spectroscopy and fluorescence spectroscopy, atomic force microscopy. The antioxidant properties, haemolytic activity and anti‐inflammatory activities were analysed. The cellular toxicity was analysed by 3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐Diphenyltetrazolium Bromide (MTT assay) and Sulforhodamine B (SRB) assay against breast cancer (MCF‐7) cell lines.Inspec keywords: nanofabrication, cancer, nanoparticles, atomic force microscopy, graphene, scanning electron microscopy, cellular biophysics, toxicology, transmission electron microscopy, drug delivery systems, nanomedicine, tumours, solubilityOther keywords: targeted drug delivery, combinatorial drug, Magnolian genus, apoptosis, cell cycle, chitosan functionalised graphene oxide nanoparticles, site‐specific drug delivery, CPT drug‐loaded nanocarrier, transmission electron microscope, fluorescence spectroscopy, haemolytic activity, antiinflammatory activities, breast cancer cell lines, honokiol–camptothecin loaded graphene oxide nanoparticle, combinatorial anti‐cancer drug delivery, natural product, genus Magnolia, anticancer activity, cancer cells     

Integration of Cynodon dactylon and Muraya koenigii plant extracts in amino‐functionalised silica‐coated magnetic nanoparticle as an effective sorbent for the removal of chromium(VI) metal pollutants

Immobilised magnetic nanoparticles are extensively used owing to their superparamagnetic nature, surface interaction, and binding specificity with the appropriate portentous substances. The present research focuses on the development of a portentous, robust carrier, which integrates the silica‐coated amino‐functionalised magnetic nanoparticle (AF‐MnP) with the plant extracts of Cynodon dactylon (L1) and Muraya koenigii (L2) for the stable and enhanced removal of hazardous hexavalent chromium pollutant in the wastewater. Vibrating sample magnetometer (M _s – 45 emu/g) determines the superparamagnetic properties; Fourier‐transform infrared spectroscopy determines the presence of functional groups such as NH₂, Si–O–Si, C=C; high‐resolution transmission electron microscopy, field emission scanning electron microscope and energy‐dispersive X‐ray spectroscopy determine the size of the green adsorbents in the range of 20 nm and the presence of elements such as Fe, N, and Si determines the efficacy of the synthesised silica‐coated AF‐MnP. The AF‐MnP‐L1 shows the maximum adsorption capacity of 34.7 mg/g of sorbent calculated from the Langmuir isotherm model and the process follows pseudo‐second‐order kinetics. After treatment, the adsorbents can be easily separated from the solution in the presence of an external magnetic field and are reused for nine cycles after acid treatment with the minimal loss of adsorption efficiency.     

Graphene oxide‐ellagic acid nanocomposite as effective anticancer and antimicrobial agent

In this study, ellagic acid (ELA), a skin anticancer drug, is capped on the surface(s) of functionalised graphene oxide (GO) nano‐sheets through electrostatic and π–π staking interactions. The prepared ELA‐GO nanocomposite have been thoroughly characterised by using eight techniques: Fourier‐transform infrared spectroscopy (FTIR), zeta potential, X‐ray diffraction (XRD), thermogravimetric analysis (TGA), Raman spectroscopy, atomic force microscopy (AFM) topographic imaging, transmission electron microscopy (TEM), and surface morphology via scanning electron microscopy (SEM). Furthermore, ELA drug loading and release behaviours from ELA‐GO nanocomposite were studied. The ELA‐GO nanocomposite has a uniform size distribution averaging 88 nm and high drug loading capacity of 30 wt.%. The in vitro drug release behaviour of ELA from the nanocomposite was investigated by UV–Vis spectrometry at a wavelength of λ _max 257 nm. The data confirmed prolonged ELA release over 5000 min at physiological pH (7.4). Finally, the IC ₅₀ of this ELA‐GO nanocomposite was found to be 6.16 µg/ml against B16 cell line; ELA and GO did not show any cytotoxic effects up to 50 µg/ml on the same cell lines.     

Comparative antibacterial activity of silver nanoparticles synthesised by biological and chemical routes with pluronic F68 as a stabilising agent

The authors report the comparative antibacterial activity of silver nanoparticles synthesised by biological (using Fusarium oxysporum) and chemical routes in the presence and absence of pluronic F68 as a stabilising agent. The production of silver nanoparticles was evidenced by UV–visible spectra, with absorbance at about 420 nm in the case of both biological and chemical synthesis. X‐ray diffraction pattern confirmed the presence of face‐centred cubic structure (FCC plane). The nanoparticles characterised by transmission and scanning electron microscopy showed spherical silver nanoparticles with size range of 5–40 and 10–70 nm in the case of biologically and chemically synthesised nanoparticles, respectively. Addition of pluronic F68 showed the stabilisation of silver nanoparticles. Antibacterial efficacy of silver nanoparticles demonstrated different inhibitory activity against Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus. Overall, biologically synthesised silver nanoparticles showed higher activity as compared with chemically synthesised nanoparticles. Silver nanoparticles synthesised in the presence of pluronic F68 by the chemical route exhibited synergism in antibacterial activity as compared with those synthesised without pluronic F68. On the contrary, biogenic silver nanoparticles without pluronic F68 showed higher antibacterial potential.Inspec keywords: antibacterial activity, nanofabrication, silver, X‐ray diffraction, biomedical materials, nanomedicine, transmission electron microscopy, scanning electron microscopy, ultraviolet spectra, visible spectra, materials preparation, nanoparticlesOther keywords: pluronic F68, stabilising agent, comparative antibacterial activity, Fusarium oxysporum, UV‐visible spectra, biological synthesis, chemical synthesis, X‐ray diffraction pattern, face‐centred cubic structure, FCC plane, transmission electron microscopy, scanning electron microscopy, spherical silver nanoparticles, antibacterial efficacy, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, synergism, biogenic silver nanoparticles, wavelength 420 nm, size 10 nm to 70 nm, size 5 nm to 40 nm, Ag     

Development and in vitro evaluation of oxytetracycline‐loaded PMMA nanoparticles for oral delivery against anaplasmosis

Poly‐methyl methacrylate (PMMA) polymer with remarkable properties and merits are being preferred in various biomedical applications due to its biocompatibility, non‐toxicity and cost effectiveness. In this investigation, oxytetracycline‐loaded PMMA nanoparticles were prepared using nano‐precipitation method for the treatment of anaplasmosis. The prepared nanoparticles were characterised using dynamic light scattering (DLS), atomic force microscopy (AFM), differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy. The mean average diameter of the nanoparticles ranged between 190–240 nm and zeta potential was found to be −19 mV. The drug loading capacity and entrapment efficiency of nanoparticles was found varied between 33.7–62.2% and 40.5–60.0%. The in vitro drug release profile exhibited a biphasic phenomenon indicating controlled drug release. The uptake of coumarin‐6(C‐6)‐loaded PMMA nanoparticles in Plasmodium falciparum (Pf 3D7) culture model was studied. The preferential uptake of C‐6‐loaded nanoparticles by the Plasmodium infected erythrocytes in comparison with the uninfected erythrocytes was observed under fluorescence microscopy. These findings suggest that oxytetracycline‐loaded PMMA nanoparticles were found to be an effective oral delivery vehicle and an alternative pharmaceutical formulation in anaplasmosis treatment, too.Inspec keywords: nanoparticles, nanomedicine, conducting polymers, microorganisms, cellular biophysics, toxicology, drug delivery systems, light scattering, atomic force microscopy, differential scanning calorimetry, Fourier transform infrared spectra, bloodOther keywords: in vitro evaluation, oxytetracycline‐loaded PMMA nanoparticles, anaplasmosis, polymethyl methacrylate polymer, biocompatibility, toxicity, oxytetracycline‐nanoparticles, nanoprecipitation method, dynamic light scattering, atomic force microscopy, AFM, differential scanning calorimetry, DSC, Fourier transform infrared spectroscopy, FTIR spectroscopy, zeta potential, drug loading capacity, entrapment efficiency, in vitro drug release profile, biphasic phenomenon, coumarin‐6(C‐6)‐loaded PMMA nanoparticles, plasmodium falciparum culture model, preferential uptake, plasmodium infected erythrocytes, fluorescence microscopy, oral delivery vehicle, anaplasmosis treatment, size 190 nm to 240 nm     

Folate encapsulation in PEG‐diamine grafted mesoporous Fe3 O4 nanoparticles for hyperthermia and in vitro assessment

Effective and targeted delivery of the antitumour drugs towards the specific cancer spot is the major motive of drug delivery. In this direction, suitably functionalised magnetic iron oxide nanoparticles (NPs) have been utilised as a theranostic agent for imaging, hyperthermia and drug delivery applications. Herein, the authors reported the preparation of multifunctional polyethyleneglycol‐diamine functionalised mesoporous superparamagnetic iron oxide NPs (SPION) prepared by a facile solvothermal method for biomedical applications. To endow targeting ability towards tumour site, folic acid (FA) is attached to the amine groups which are present on the NPs surface by 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide hydrochloride/N‐hydroxysuccinimide chemistry. FA attached SPION shows good colloidal stability and possesses high drug‐loading efficiency of ∼ 96% owing to its mesoporous nature and the electrostatic attachment of daunosamine (NH₃ ⁺) group of doxorubicin (DOX) towards the negative surface charge of carboxyl and hydroxyl group. The NPs possess superior magnetic properties in result endowed with high hyperthermic ability under alternating magnetic field reaching the hyperthermic temperature of 43°C within 223 s at NP''s concentration of 1 mg/ml. The functionalised NPs possess non‐appreciable toxicity in breast cancer cells (MCF‐7) which is triggered under DOX‐loaded SPION.Inspec keywords: nanoparticles, nanocomposites, mesoporous materials, colloids, biochemistry, nanomagnetics, molecular biophysics, tumours, superparamagnetism, drugs, toxicology, biomedical materials, nanofabrication, hyperthermia, cancer, magnetic particles, cellular biophysics, nanomedicine, iron compounds, drug delivery systems, filled polymers, biological organs, liquid phase depositionOther keywords: NP surface, colloidal stability, drug‐loading efficiency, hydroxyl group, magnetic properties, high hyperthermic ability, magnetic field, DOX‐loaded SPION, folate encapsulation, targeted delivery, antitumour drugs, specific cancer spot, magnetic iron oxide nanoparticles, theranostic agent, drug delivery applications, multifunctional polyethyleneglycol‐diamine, facile solvothermal method, biomedical applications, tumour site, amine groups, mesoporous superparamagnetic nanoparticles, PEG‐diamine grafted mesoporous nanoparticles, 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide hydrochloride‐N‐hydroxysuccinimide chemistry, daunosamine group, carboxyl group, breast cancer cells, temperature 43.0 degC, Fe₃ O₄      

Synthesis and comparative assessment of antiradical activity,toxicity, and biodistribution of κ‐carrageenan‐capped selenium nanoparticles of different size: in vivo and in vitro study

In the present study, water‐soluble hybrid selenium‐containing nanocomposites have been synthesised via soft oxidation of selenide‐anions, preliminarily generated from elemental bulk‐selenium in the base‐reduction system ‘N₂ H₄ –NaOH’. The nanocomposites obtained consist of Se⁰ NPs (4.6–24.5 nm) stabilised by κ‐carrageenan biocompatible polysaccharide. The structure of these composite nanomaterials has been proven using complementary physical–chemical methods: X‐ray diffraction analysis, transmission electron microscopy, optical spectroscopy, and dynamic light scattering. Optical ranges of ‘emission/excitation’ of aqueous solutions of nanocomposites with Se⁰ NPs of different sizes are established and the most important parameters of their luminescence are determined. For the obtained nanocomposites, the expressed antiradical activity against free radicals 2,2‐diphenyl‐1‐picrylhydrazyl and 2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulphonic acid has been found, the value of which depends on the size of selenium nanoparticles. It is experimentally revealed that all obtained nanocomposites are low toxic (LD₅₀ >2000 mg/kg). It is also found that small selenium nanoparticles (6.8 nm), in contrast to larger nanoparticles (24.5 nm), are accumulated in organisms to significantly increase the level of selenium in the liver, kidneys, and brain (in lesser amounts) of rats.Inspec keywords: nanobiotechnology, free radical reactions, oxidation, enzymes, selenium, solubility, nanofabrication, transmission electron microscopy, X‐ray diffraction, free radicals, reduction (chemical), biomedical materials, nanoparticles, nanomedicine, light scattering, organic‐inorganic hybrid materials, biochemistry, nanocompositesOther keywords: κ‐carrageenan biocompatible polysaccharide, composite nanomaterials, complementary physical–chemical methods, X‐ray diffraction analysis, transmission electron microscopy, optical spectroscopy, dynamic light scattering, optical ranges, expressed antiradical activity, 2,2‐diphenyl‐1‐picrylhydrazyl, 3‐ethylbenzothiazoline‐6‐sulphonic acid, comparative assessment, toxicity, κ‐carrageenan‐capped selenium nanoparticles, water‐soluble hybrid selenium‐containing nanocomposites, soft oxidation, selenide‐anions, elemental bulk‐selenium, base‐reduction system, free radicals, 2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulphonic acid, selenium nanoparticles, nanocomposites, liver, kidneys, brain, luminescence, size 4.6 nm to 24.5 nm     

Design and development of a portable resistive sensor based on α‐MnO2/GQD nanocomposites for trace quantification of Pb(II) in water

The occurrence of heavy metal ions in food chain is appearing to be a major problem for mankind. The traces of heavy metals, especially Pb(II) ions present in water bodies remains undetected, untreated, and it remains in the food cycle causing serious health hazards for human and livestock. The consumption of Pb(II) ions may lead to serious medical complications including multiple organ failure which can be fatal. The conventional methods of heavy metal detection are costly, time‐consuming and require laboratory space. There is an immediate need to develop a cost‐effective and portable sensing system which can easily be used by the common man without any technical knowhow. A portable resistive device with miniaturized electronics is developed with microfluidic well and α‐MnO₂/GQD nanocomposites as a sensing material for the sensitive detection of Pb(II). α‐MnO₂/GQD nanocomposites which can be easily integrated with the miniaturized electronics for real‐time on‐field applications. The proposed sensor exhibited a tremendous potential to be integrated with conventional water purification appliances (household and commercial) to give an indication of safety index for the drinking water. The developed portable sensor required low sample volume (200 µL) and was assessed within the Pb(II) concentration range of 0.001 nM to 1 uM. The Limit of Detection (LoD) and sensitivity was calculated to be 0.81 nM and 1.05 kΩ/nM/mm², and was validated with the commercial impedance analyser. The shelf‐life of the portable sensor was found to be ∼45 days.     

The use of slow releasing nanoparticle encapsulated Azadirachtin formulations for the management of Caryedon serratus O. (groundnut bruchid)

Nanobiotechnology is one of the emerging fields and its interventions in agriculture is been attracting the scientific community. Herein, the authors first to report on control of groundnut bruchid (Caryedon serratus O.) using nanoscale zinc oxide (ZnONPs) particles and nanoscale chitosan (CNPs) particles‐based Azadirachtin formulations. ZnONPs and CNPs were prepared using sol–gel and ion tropic gelation techniques, respectively. Neem seed kernel extract (NSKE) 5% and Neem oil (3000 and 1000 ppm) were encapsulated using the prepared nanoscale materials and characterised using the techniques such as dynamic light scattering, high‐resolution transmission electron microscopy. Spherical‐shaped nanoparticles were formed after encapsulation with the required bio‐materials (ZnONPs 33.1 nm; CNPs 78.8 nm; neem oil encapsulated (3000 ppm) ZnONPs 182.9 nm; NSKE encapsulated ZnONPs 84.9 nm) and observed that the particles are stable (52.3 mV for ZnONPs, −36.2 mV for CNPs, −43.0 mV for neem oil encapsulated (3000 ppm) ZnONPs and −39.4 mV for NSKE encapsulated ZnONPs). NSKE encapsulated CNPs were able to contain groundnut bruchid up to 180 days with 54.61% weight loss compared to other formulations tested. Thus biomaterial encapsulated nanoscale material formulations are proved to be effective in controlling stored grain pests to reduce huge economic losses.Inspec keywords: nanobiotechnology, agricultural products, toxicology, agrochemicals, food safety, sol‐gel processing, food preservation, agriculture, II‐VI semiconductors, storage, nanoparticles, transmission electron microscopy, encapsulation, nanofabrication, zinc compounds, wide band gap semiconductors, food processing industry, light scattering, materials preparation, pest control, nanocompositesOther keywords: voltage ‐36.2 mV, voltage ‐43.0 mV, voltage ‐39.4 mV, voltage 52.3 mV, size 84.9 nm, size 182.9 nm, size 78.8 nm, size 33.1 nm, NSKE, neem seed kernel extract, caryedon serratus O., CNPs, bio‐materials, nanoscale materials, nanoparticle, encapsulation, spherical‐shaped nanoparticles, high‐resolution transmission electron microscopy, neem oil, ion tropic gelation techniques, sol–gel, nanoscale chitosan particles, nanoscale zinc oxide particles, scientific community, groundnut bruchid, Azadirachtin formulations, biomaterial encapsulated nanoscale material formulations