Optical detection of CA 15.3 breast cancer antigen using CdS quantum dot

The present study focus on optical sensing of breast cancer antigen 15.3 (CA 15.3) using cadmium sulphide quantum dot (CdS‐QD) in saline and serum samples spiked with antigen. The surface of CdS‐QD was modified by cysteamine capping followed by tagging of CA 15.3 antibody. The samples were characterised using UV‐visible absorption spectroscopy (UV‐VIS Spectroscopy), Fourier transform infrared spectroscopy (FTIR), high‐resolution transmission electron microscopy (HRTEM) attached with energy‐dispersive X‐ray spectroscopy, phase contrast inverted epi‐fluorescence microscopy and photoluminescence (PL) spectrophotometry (EDS). The CdS‐QD showed a mean diameter of 3.02 ± 0.6 nm. The complex formed after antigen‐antibody interaction resulted in distinguishable optical and fluorescence intensity with respect to varying concentration of antigen. The PL study revealed that CA 15.3 antibody labelled CdS QD can detect CA 15.3 tumour marker even at very low concentration of 0.002 KU/L with a constant response time of 15 min. This study clearly indicates that detection of CA 15.3 at low concentration is possible using surface modified CdS QD in serum samples and can find immense applications in biosensor development for detection of breast cancer marker similar to various automated detection kits available in market.Inspec keywords: semiconductor quantum dots, cadmium compounds, II‐VI semiconductors, wide band gap semiconductors, cancer, tumours, optical sensors, biosensors, biomedical equipment, visible spectra, ultraviolet spectra, Fourier transform infrared spectra, transmission electron microscopy, X‐ray chemical analysis, fluorescence, optical microscopy, photoluminescence, proteins, molecular biophysics, nanosensors, nanomedicine, nanoparticlesOther keywords: optical detection, CA 15.3 breast cancer antigen, optical sensing, cadmium sulphide quantum dot, saline samples, serum samples, cysteamine capping, CA 15.3 antibody, UV‐visible absorption spectroscopy, Fourier transform infrared spectroscopy, high‐resolution transmission electron microscopy, energy dispersive X‐ray spectroscopy, phase contrast inverted epifluorescence microscopy, photoluminescence spectrophotometry, antigen‐antibody interaction, fluorescence intensity, optical intensity, CA 15.3 tumour marker, surface modified CdS QD, biosensor development, time 15 min, CdS     

Fabrication challenges and perspectives on the use of carbon‐electrode dielectrophoresis in sample preparation

The focus of this review is to assess the current status of three‐dimensional (3D) carbon‐electrode dielectrophoresis (carbonDEP) and identify the challenges currently preventing it from its use in high‐throughput applications such as sample preparation for diagnostics. The use of 3D electrodes over more traditional planar ones is emphasised here as a way to increase the throughput of DEP devices. Glass‐like carbon electrodes are derived through the carbonisation of photoresist structures made using photolithography. These biocompatible carbon electrodes are not ideal electrical conductors but are more electrochemically stable than noble metals such as gold and platinum. They are also significantly less expensive than common electrode materials, both in terms of material cost and fabrication process. CarbonDEP has been demonstrated for the manipulation of microorganisms and biomolecules. This review is divided in three main sections: (i) carbonDEP fabrication process; (ii) applications using 3D carbonDEP; and (iii) challenges and perspectives on the use of carbonDEP for high‐throughput applications.Inspec keywords: electrophoresis, electrochemical electrodes, photoresists, electrochemistry, microorganisms, biological specimen preparationOther keywords: sample preparation, three‐dimensional carbon‐electrode dielectrophoresis, high‐throughput applications, diagnostics, 3D electrodes, DEP devices, glass‐like carbon electrodes, carbonisation, photoresist structures, photolithography, biocompatible carbon electrodes, electrochemical stability, electrode materials, material cost, fabrication process, microorganisms, biomolecules, carbonDEP fabrication, C     

Parallel implementation of D‐Phylo algorithm for maximum likelihood clusters

This study explains a newly developed parallel algorithm for phylogenetic analysis of DNA sequences. The newly designed D‐Phylo is a more advanced algorithm for phylogenetic analysis using maximum likelihood approach. The D‐Phylo while misusing the seeking capacity of k ‐means keeps away from its real constraint of getting stuck at privately conserved motifs. The authors have tested the behaviour of D‐Phylo on Amazon Linux Amazon Machine Image(Hardware Virtual Machine)i2.4xlarge, six central processing unit, 122 GiB memory, 8 ×  800 Solid‐state drive Elastic Block Store volume, high network performance up to 15 processors for several real‐life datasets. Distributing the clusters evenly on all the processors provides us the capacity to accomplish a near direct speed if there should arise an occurrence of huge number of processors.Inspec keywords: parallel algorithms, Linux, pattern clustering, DNA, molecular biophysics, genetics, biology computingOther keywords: D‐Phylo algorithm parallel implementation, maximum likelihood clusters, DNA sequence phylogenetic analysis, Amazon Linux AMI, HVM, central processing unit, SSD, real‐life datasets, processors, high‐network performance     

CL sensitisation of tris‐(bipyridyl) ruthenium (II) – cerium (IV) reaction system by AgNPs for determination of GFX

The flow injection combined with tris‐(bipyridyl) ruthenium (II)‐cerium (IV) chemiluminescence (CL) method based on the sensitisation of silver nanoparticles (AgNPs) has been established for the quantitative analysis of gatifloxacin (GFX). AgNPs were synthesised using the reaction between ammonia gas and silver nitrate solution and was used to increase the CL intensity of the proposed system. The enhancement of CL intensity was linear with the concentration of GFX added. Effects of different experimental parameters were studied. Under the optimal conditions, the linear relationship was established between the concentration range of 1.4 × 10⁻¹⁰ –4.5 × 10⁻⁸ M, with the correlation coefficient (r²) 02E9999. The limit of detection was found to be 4.6 × 10⁻¹¹ M. The relative standard deviation obtained was 3.2% for six replicate measurements of GFX (1.2 × 10⁻⁹ M). The proposed CL method was applied to the commercial drug and the result was in agreement with the labelled amount. The technique was further adopted to the analysis of GFX in spiked urine samples. Negligible interference was found (variation in CL intensity <5%) from a few common foreign excipients applied in preparation of pharmaceutical drug. The comparative results with a few reported methods indicates that the proposed method is more sensitive than other methods..Inspec keywords: chemiluminescence, chemical sensors, optical sensors, silver, nanoparticles, nanosensors, transmission electron microscopy, measurement standardsOther keywords: CL sensitisation, tris‐(bipyridyl) ruthenium (II)–cerium (IV) reaction system, NP, GFX determination, flow injection, chemiluminescence sensitisation, nanoparticle, gatifloxacin determination, morphological characterisation, ultraviolet spectrometry, transmission electron microscopy imaging, spiked urine sample, interference, pharmaceutical drug, Ag     

Peanut skin extract mediated synthesis of gold nanoparticles,silver nanoparticles and gold–silver bionanocomposites for electrochemical Sudan IV sensing

Sustainable methods are needed for rapid and efficient detection of environmental and food pollutants. The Sudan group of dyes has been used extensively as adulterants in food and also are found to be polluting the soil and water bodies. There have been several methods for detection of Sudan dyes, but most of them are not practical enough for common use. In this study, the electrochemical detection efficiency and stability of gold nanoparticle (AuNPs), silver NPs and Au–Ag bionanocomposites, synthesised by peanut skin extract, modified glassy carbon electrode has been investigated. The synthesised nanomaterial samples were characterised, for their quality and quantity, using ultra–visible spectroscopy, inductive coupled plasma mass spectrophotometer, Fourier transform infrared spectroscopy, energy‐dispersive X‐ray spectroscopy, high‐resolution transmission electron microscope and field emission scanning electron microscope. The nanomaterial hybrid electrodes showed great efficiency and stability in the detection of Sudan IV compared with the other previous electrodes. The peak current of the Sudan IV oxidation and reduction was found to be proportional to its concentration, in the range of 10–80 µM, with a detection limit of 4 µM. The hybrid electrodes showed 90% stability in detection for 20 cycles.Inspec keywords: gold, silver, nanoparticles, nanocomposites, biomedical materials, electrochemical sensors, dyes, nanofabrication, ultraviolet spectra, visible spectra, spectrophotometry, Fourier transform infrared spectra, X‐ray chemical analysis, transmission electron microscopy, scanning electron microscopy, field emission electron microscopyOther keywords: peanut skin extract mediated synthesis, gold nanoparticles, silver nanoparticles, gold–silver bionanocomposites, electrochemical Sudan IV sensing, electrochemical detection efficiency, modified glassy carbon electrode, ultra–visible spectroscopy, inductive coupled plasma mass spectrophotometer, Fourier transform infrared spectroscopy, energy‐dispersive X‐ray spectroscopy, high‐resolution transmission electron microscope, field emission scanning electron microscope, oxidation, reduction, detection limit, Au, Ag, Au‐Ag     

Experimental and theoretical investigation of sensing parameters in carbon nanotube‐based DNA sensor

Nowadays, sensitive biosensors with high selectivity, lower costs and short response time are required for detection of DNA. The most preferred materials in DNA sensor designing are nanomaterials such as carbon and Au nanoparticles, because of their very high surface area and biocompatibility which lead to performance and sensitivity improvements in DNA sensors. Carbon nanomaterials such as carbon nanotubes (CNTs) can be considered as a suitable DNA sensor platform due to their high surface‐to‐volume ratio, favourable electronic properties and fast electron transfer rate. Therefore, in this study, the CNTs which are synthesised by pulsed AC arc discharge method on a high‐density polyethylene substrate are used as conducting channels in a chemiresistor for the electrochemical detection of double stranded DNA. Moreover, the response of the proposed sensor is investigated experimentally and analytically in different temperatures, which confirm good agreement between the presented model and experimental data.Inspec keywords: electrochemical sensors, polymers, arcs (electric), biological techniques, nanosensors, carbon nanotubes, DNAOther keywords: C, chemiresistor, double stranded DNA detection, CNT, electronic properties, surface‐to‐volume ratio, nanoparticles, biosensors, electrochemical detection, high‐density polyethylene substrate, pulsed AC arc discharge method, electron transfer rate, carbon nanomaterials, carbon nanotube‐based DNA sensor     

Cross‐linking gold nanoparticles aggregation method based on localised surface plasmon resonance for quantitative detection of miR‐155

MiR‐155 plays a critical role in the formation of cancers and other diseases. In this study, the authors aimed to design and fabricate a biosensor based on cross‐linking gold nanoparticles (AuNPs) aggregation for the detection and quantification of miR‐155. Also, they intended to compare this method with SYBR Green real‐time polymerase chain reaction (PCR). Primers for real‐time PCR, and two thiolated capture probes for biosensor, complementary with miR‐155, were designed. Citrate capped AuNPs (18.7 ± 3.6 nm) were synthesised and thiolated capture probes immobilised to AuNPs. The various concentrations of synthetic miR‐155 were measured by this biosensor and real‐time PCR method. Colorimetric changes were studied, and the calibration curves were plotted. Results showed the detection limit of 10 nM for the fabricated biosensor and real‐time PCR. Also, eye detection using colour showed the weaker detection limit (1 µM), for this biosensor. MiR‐133b as the non‐complementary target could not cause a change in both colour and UV–visible spectrum. The increase in hydrodynamic diameter and negative zeta potential of AuNPs after the addition of probes verified the biosensor accurately fabricated. This fabricated biosensor could detect miR‐155 simpler and faster than previous methods.Inspec keywords: RNA, molecular biophysics, biochemistry, cancer, nanoparticles, gold, aggregation, surface plasmon resonance, molecular configurations, nanosensors, enzymes, calibration, ultraviolet spectra, visible spectra, eye, hydrodynamics, electrokinetic effects, biosensors, nanofabricationOther keywords: cross‐linking gold nanoparticles aggregation method, localised surface plasmon resonance, quantitative detection, cancers, diseases, biosensor, miR‐155 detection, miR‐155 quantification, SYBR green real‐time polymerase chain reaction, thiolated capture probes, citrate capped AuNPs, synthetic miR‐155, real‐time PCR method, colorimetric changes, calibration curves, eye detection, colour, detection limit, MiR‐133b, noncomplementary target, UV‐visible spectrum, hydrodynamic diameter, negative zeta potential, Au     

Mesoporous titanium dioxide nanocatalyst: a recyclable approach for one‐pot synthesis of 5‐hydroxymethylfurfural

The present study deals with the production of 5‐hydroxymethyl furfural (HMF) from fructose by chemo‐conversion method using chemical catalyst, conventionally achieved by microwave‐assisted dehydration process. Five different chemical catalysts, namely oxalic acid, phosphotungstic acid and mesoporous titanium dioxide nanoparticles (TNPs) were compared at constant conditions of which TNPs yielded a maxima of 33.95%. The optimum temperature and catalyst loading were found to be 200°C and 20%, respectively, at a 5% optimum substrate concentration during 15 min optimum reaction time to yield 61.53% HMF. The efficiency of synthesised TNPs was investigated further through reusability studies. TNPs were properly recycled and the catalytic activity recovery was good even after a 14 batch reactions. The specific surface area of the TNP obtained is about 105.46 m² /g and its pore‐volume is about 0.42 cm³ /g according to single point adsorption. A large accessible surface area combined with a minimal pore size (15.92 nm) obtained with mesoporous TNPs is desirable for better catalyst loading, high‐yield HMF, retention and reduced diffusion constraints.Inspec keywords: mesoporous materials, recycling, production management, dissociation, nanoparticles, nanotechnologyOther keywords: mesoporous titanium dioxide nanocatalyst, recyclable approach, one‐pot synthesis, 5‐hydroxymethyl furfural production, HMF, chemo‐conversion method, chemical catalyst, microwave‐assisted dehydration process, oxalic acid, phosphotungstic acid, mesoporous titanium dioxide nanoparticles, TNP     

Biosynthesis of AgNPs using aqueous leaf extract of Ipomoea eriocarpa and their anti‐inflammatory effect on carrageenan‐induced paw edema in male Wistar rats

Silver nanoparticles (AgNPs) were synthesised from aqueous Ag nitrate through a simple, competent and eco‐friendly method using the leaf extract of Ipomoea eriocarpa as reducing as well as capping agent. Ultraviolet–visible absorption spectroscopy was used to confirm the formation of AgNPs which displayed the substantiation of surface plasmon bands at 425 nm. The NPs were also characterised using Fourier transformer infrared spectroscopy, X‐ray diffraction method, transmission electron microscope and zeta potential. The characterisation study confirmed the formation of AgNPs, their spherical shape and average diameter of 12.85 ± 8.65 nm. Zeta potential value of −20.5 mV suggested that the AgNPs are stable in the suspension. The aqueous extract and the AgNPs were further screened for in vivo anti‐inflammatory activity using carrageenan‐induced paw edema in male Wistar rats. The study demonstrated that the AgNPs (1 ml kg⁻¹) had a significant (p  < 0.05) anti‐edemic effect and inhibition was observed from the first hour (21.31 ± 1.34) until the sixth hour (52.67 ± 1.41), when the inhibitory effect was greatest and superior to the aqueous extract and the standard, diclofenac.Inspec keywords: silver, nanoparticles, nanofabrication, ultraviolet spectra, visible spectra, absorption coefficients, surface plasmons, Fourier transform infrared spectra, X‐ray diffraction, transmission electron microscopy, suspensions, drugs, nanomedicineOther keywords: biosynthesis, aqueous leaf extract, ipomoea eriocarpa, antiinflammatory effect, carrageenan‐induced paw edema, male Wistar rats, silver nanoparticles, aqueous nitrate, capping agent, ultraviolet‐visible absorption spectroscopy, surface plasmon band, Fourier transformer infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, zeta potential, spherical shape, suspension, aqueous extract, in vivo antiinflammatory activity, antiedemic effect, inhibitory effect, diclofenac, wavelength 425 nm, size 12.85 nm to 8.65 nm, Ag     

Signal amplification strategy using gold/N ‐trimethyl chitosan/iron oxide magnetic composite nanoparticles as a tracer tag for high‐sensitive electrochemical detection

This study presents a novel signal amplification method for high‐sensitive electrochemical immunosensing. Gold (Au)/N ‐trimethyl chitosan (TMC)/iron oxide (Fe₃ O₄) (shell/shell/core) nanocomposite was used as a tracing tag to label antibody. The tag was shown to be capable of amplifying the recognition signal by high‐density assembly of Au nanoparticles (NPs) on TMC/Fe₃ O₄ particles. The remarkable conductivity of AuNPs provides a feasible pathway for electron transfer. The method was found to be simple, reliable and capable of high‐sensitive detection of human serum albumin as a model, down to 0.2 pg/ml in the range of 0.25–1000 pg/ml. Findings of the present study would create new opportunities for sensitive and rapid detection of various analytes.Inspec keywords: gold, filled polymers, conducting polymers, iron compounds, magnetic particles, nanoparticles, nanocomposites, nanosensors, electrochemical sensors, proteins, molecular biophysics, biomagnetism, biosensorsOther keywords: signal amplification strategy, gold‐N‐trimethyl chitosan‐iron oxide magnetic composite nanoparticles, tracer tag, high‐sensitive electrochemical detection, high‐sensitive electrochemical immunosensing, antibody, high‐density assembly, AuNP conductivity, electron transfer, human serum albumin, FeO‐Au     

Screening the UV‐blocking and antimicrobial properties of herbal nanoparticles prepared from Aloe vera leaves for textile applications

Nanomaterials play a vital role in textile industries due to their unique properties and applications. There is an increase in the use of nanoscale phyto products in textiles to control the bacterial infection in fabrics. Here, natural herbal nanoparticles of different sizes were prepared from shade‐dried Aloe vera plant leaves using ball milling technique without any additives. The amorphous herbal A. vera nanoparticles possess an average particle size of 40 ± 2 nm and UV‐absorption maximum at 269 nm. A. vera nanopowders–chitosan nanocomposites were prepared and coated on cotton fabrics using pad‐dry cure method. The evaluation of antibacterial activity against Escherichia coli (22.05 ± 0.06 mm) and Staphylococcus aureus (27.17 ± 0.02 mm), UV‐protection properties (UV‐protection factor = 57.2 ± 0.1), and superhydrophobic nature (155 ± 3°) of the prepared herbal nanoparticles and their composites were analysed by disc diffusion, UV–visible spectral analysis, and contact angle analysis. Understanding the functional properties of herbal nanoparticles, coated particles on fabrics highlights their potential applications in protective clothing with better antimicrobial properties, hydrophobicity, and UV‐protection properties. This study of using A. vera herbal nanoparticles in textiles significantly enhances the fabric performance to develop protective textile fabrics in defence and biomedical fields.Inspec keywords: nanoparticles, particle size, nanofabrication, nanomedicine, antibacterial activity, biomedical materials, hydrophobicity, ultraviolet spectra, visible spectra, radiation protection, textile fibres, cotton fabrics, ball milling, X‐ray diffraction, light scattering, scanning electron microscopy, X‐ray fluorescence analysis, fluorescence, amorphous state, nanocomposites, filled polymers, protective coatings, curing, microorganisms, biodiffusion, contact angle, surface morphology, protective clothingOther keywords: UV‐blocking, antimicrobial properties, disc diffusion, UV‐visible spectral analysis, contact angle analysis, morphological characteristics, protective clothing, protective textile fabrics, biomedical fields, superhydrophobic nature, UV‐protection factor, UV‐protection properties, Staphylococcus aureus, Escherichia coli, pad‐dry cure method, cotton fabrics, A. vera nanopowders‐chitosan nanocomposites, UV‐absorption maximum, average particle size, amorphous herbal A. vera nanoparticles, X‐ray fluorescence spectrometry, scanning electron microscopy, dynamic light scattering, UV‐visible spectrophotometry, X‐ray diffraction, ball milling, shade‐dried Aloe vera plant leaves, natural herbal nanoparticle size, bacterial infection, nanoscale phyto products, textile industries, nanomaterials, textile applications     

Facile synthesis of gold nanoparticles using carbon dots for electrochemical detection of neurotransmitter,dopamine in human serum and as a chemocatalyst for nitroaromatic reduction

Herein, the authors reported a carbon dots mediated synthesis of gold nanoparticles (AuNPs) at room temperature. Transmission electron microscopy revealed that the AuNPs are spherical in shape with a size of 10 nm. As‐prepared AuNPs was immobilised on carbon paste electrode and subjected to electrochemical sensing of an important neurotransmitter dopamine. Differential pulse voltammetry studies revealed sensitive and selective determination of dopamine in the presence of commonly interfering ascorbic acid and uric acid. The linear detection range was 10–600 μM and the limit of detection was 0.7 ± 0.18 μM. The practical application was demonstrated by measuring dopamine in human blood serum and urine samples. The catalytic activity of AuNPs was evaluated by sodium borohydride mediated reduction of nitroaromatic compounds. The reduction kinetics was found to be pseudo‐first‐order kinetics. All the tested nitroaromatics reduced to corresponding amines in <10 min.Inspec keywords: voltammetry (chemical analysis), electrochemical sensors, biosensors, nanosensors, reduction (chemical), organic compounds, nanofabrication, gold, catalysis, transmission electron microscopy, electrochemical electrodes, blood, nanoparticles, carbon, chemical variables measurement, catalysts, particle sizeOther keywords: nitroaromatic compounds, reduction kinetics, gold nanoparticles, chemocatalyst, nitroaromatic reduction, carbon dots mediated synthesis, room temperature, transmission electron microscopy, carbon paste electrode, electrochemical sensing, ascorbic acid, uric acid, linear detection range, human blood serum, urine samples, sodium borohydride mediated reduction, neurotransmitter dopamine, differential pulse voltammetry, catalytic activity, pseudofirst‐order kinetics, amines, temperature 293 K to 298 K, C‐Au     

Phyto‐mediated synthesis,biological and catalytic activity studies of gold nanoparticles

In the present study, a phyto‐mediated synthesis of gold nanoparticles (AuNPs) using an isoflavone, Dalspinosin (5,7‐dihydroxy‐6,3′,4′‐trimethoxy isoflavone) isolated from the alcoholic extract of roots of Dalbergia coromandeliana is reported. It is observed that Dalspinosin itself acts both as a reducing and a capping agent in the synthesis of the nanoparticles (NPs). An ultraviolet–visible (UV–Vis) spectral study showed a surface plasmon resonance band at 526 nm confirming the formation of AuNPs. The NPs formed were characterised by UV–Vis spectroscopy, Fourier transform‐infrared spectroscopy, X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HR‐TEM) with energy‐dispersive x‐ray spectroscopy (EDX) and dynamic light scattering. HR‐TEM analysis showed the synthesised AuNPs were spherical in shape with a size of 7.5 nm. The AuNPs were found to be stable for seven months when tested by in vitro methods showed good antioxidant and anti‐inflammatory activities. They also showed moderate anti‐microbial activities when tested against Gram positive (Staphylococcus aureus and Streptococcus sp), Gram negative bacterial strains (Klebsiella pneumonia and Klebsiella terrigena) and fungal strain (Candida glabrata). The biosynthesised AuNPs showed significant catalytic activity in the reduction of methylene blue with NaBH₄ to leucomethylene blue.Inspec keywords: biomedical materials, catalysis, Fourier transform infrared spectra, gold, light scattering, microorganisms, nanomedicine, nanoparticles, spectrochemical analysis, surface plasmon resonance, transmission electron microscopy, ultraviolet spectra, visible spectra, X‐ray chemical analysis, X‐ray diffractionOther keywords: phyto‐mediated synthesis, biological activity studies, catalytic activity studies, dalspinosin (5,7‐dihydroxy‐6,3′,4′‐trimethoxy isoflavone), alcoholic extract, roots, Dalbergia coromandeliana, ultraviolet‐visible spectral study, surface plasmon resonance band, UV‐Vis spectroscopy, Fourier transform‐infrared spectroscopy, X‐ray diffraction, high‐resolution transmission electron microscopy, EDX analysis, dynamic light scattering, HR‐TEM analysis, antioxidant activities, antiinflammatory activities, antimicrobial activities, Gram positive bacterial strains, Staphylococcus aureus, Streptococcus sp, Gram negative bacterial strains, wavelength 526 nm, size 7.5 nm, time 7 month, Au     

Laser‐induced heating for in situ DNA replication and detection in microchannels

This study proposes a method for in situ local deoxyribonucleic acid (DNA) replication and detection in a long DNA strand through laser‐induced heating and strong avidin–biotin binding. To achieve the target DNA replication, dielectrophoresis was generated to stretch and immobilise DNA strands on both ends of the electrode. Subsequently, local DNA sequences were replicated using thermal cycles generated by laser‐induced heating. Replicated double‐stranded DNA products were captured in situ on a solid surface and detected using the fluorescence intensity of quantum dots (Qdots). The results revealed that after six laser‐induced thermal cycles, the replicated local DNA sequence could be detected by analysing the difference between Qdot fluorescent intensity before and after replication. The proposed method is expected to improve the efficiency of biosample gene sequence analysis.Inspec keywords: DNA, molecular biophysics, fluorescence, electrophoresis, biochemistry, molecular configurations, quantum dots, laser beam applications, biothermicsOther keywords: laser‐induced heating, long DNA strand, target DNA replication, DNA strands, local DNA sequences, thermal cycles, replicated double‐stranded DNA products, replicated local DNA sequence, in situ DNA replication, in situ local deoxyribonucleic acid replication, strong avidin‐biotin binding, biosample gene sequence analysis, Qdot fluorescent intensity, laser‐induced thermal cycles     

Green chemistry synthesis of nano‐cuprous oxide

Green chemistry and a central composite design, to evaluate the effect of reducing agent, temperature and pH of the reaction, were employed to produce controlled cuprous oxide (Cu₂ O) nanoparticles. Response surface method of the ultraviolet–visible spectroscopy is allowed to determine the most relevant factors for the size distribution of the nanoCu₂ O. X‐ray diffraction reflections correspond to a cubic structure, with sizes from 31.9 to 104.3 nm. High‐resolution transmission electron microscopy reveals that the different shapes depend strongly on the conditions of the green synthesis.Inspec keywords: nanostructured materials, copper compounds, nanofabrication, pH, response surface methodology, ultraviolet spectra, X‐ray diffraction, transmission electron microscopyOther keywords: green chemistry synthesis, nanocuprous oxide, reducing agent, reaction pH, response surface method, ultraviolet‐visible spectroscopy, size distribution, cubic structure, high‐resolution transmission electron microscopy, X‐ray diffraction reflection, central composite design, Cu₂ O     

Sorption of Cu(II) ions by nano‐scale zero valent iron supported on rubber seed shell

This study focused on synthesising nano‐scale zero valent iron (NZVI) impregnated on a low‐cost agro‐waste material, rubber seed shell (RSS), by borohydride reduction method. The characterisation studies of NZVI‐RSS were performed by Fourier transform infrared spectroscopy, scanning electron microscopy and X‐ray diffraction. The adsorption execution of NZVI‐RSS for Cu(II) ions evacuation from synthetic wastewater was explored by batch studies. The optimum condition for the present adsorption system is as follows: Cu(II) ion concentration = 25 mg/l; solution pH = 6.0; contact time = 30 min; NZVI‐RSS dose = 3 g/l; temperature = 30°C. The sorption data were best portrayed by pseudo‐first‐order and Freundlich models. The outcomes demonstrated the multilayer sorption of Cu(II) ions by NZVI‐RSS. The Langmuir capacity was observed as 48.18 mg/g. Thermodynamic parameters, ΔG °, ΔH ° and ΔS ° were ascertained, and it was watched that the adsorption system was unconstrained and exothermic. The sticking probability for Cu(II) ions by NZVI‐RSS was found to be high at lower temperature. At long last, the research inquire about reasoned that NZVI‐RSS has demonstrated unrivalled adsorption capacity. Also NZVI‐RSS is thought to be really green and financially amicable support for wastewater treatment.Inspec keywords: adsorption, copper, X‐ray diffraction, scanning electron microscopy, wastewater treatment, Fourier transform infrared spectroscopyOther keywords: nano‐scale zero valent iron, rubber seed shell, copper ions, borohydride reduction method, NZVI‐RSS, Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, adsorption execution, synthetic wastewater, Langmuir capacity, Freundlich models, adsorption system, wastewater treatment, adsorption capacity, Cu     

Colorimetric‐based detection of Ureaplasma urealyticum using gold nanoparticles

Ureaplasma urealyticum (uu) is one of the most common agents of urogenital infections and is associated with complications such as infertility, spontaneous abortion and other sexually transmitted diseases. Here, a DNA sensor based on oligonucleotide target‐specific gold nanoparticles (AuNPs) was developed, in which the dispersed and aggregated states of oligonucleotide‐functionalised AuNPs were optimised for the colorimetric detection of a polymerase chain reaction (PCR) amplicon of U. urealyticum DNA. A non‐cross‐linking approach utilising a single Au‐nanoprobe specific of the urease gene was utilised and the effect of a PCR product concentration gradient evaluated. Results from both visual and spectral analyses showed that target–Au‐nanoprobe hybrids were stable against aggregation after adding the inducer. Furthermore, when a non‐target PCR product was used, the peak position shifted and salt‐induced aggregation occurred. The assay''s limit of detection of the assay was 10 ng with a dynamic range of 10–60 ng. This procedure provides a rapid, facile and low‐cost detection format, compared to methods currently used for the identification of U. urealyticum.Inspec keywords: patient diagnosis, diseases, enzymes, nanosensors, microorganisms, molecular biophysics, DNA, nanoparticles, aggregation, cellular biophysics, colorimetry, genetics, gold, nanomedicineOther keywords: urogenital infections, infertility, spontaneous abortion, sexually transmitted diseases, DNA sensor, oligonucleotide target‐specific gold nanoparticles, oligonucleotide‐functionalised AuNPs, colorimetric detection, polymerase chain reaction amplicon, noncross‐linking approach, single Au‐nanoprobe specific, urease gene, visual analyses, spectral analyses, target–Au‐nanoprobe hybrids, nontarget PCR product, salt‐induced aggregation, rapid cost detection format, facile cost detection format, low‐cost detection format, PCR product concentration, Ureaplasma urealyticum DNA, Au     

Synthesis of biotin‐targeted chitosan/poly (methyl vinyl ether‐alt ‐maleic acid) copolymeric micelles for delivery of doxorubicin

Biotinylated chitosan/poly(methyl vinyl ether‐alt ‐maleic acid) (PMVEMA) copolymer was synthesised by an amide reaction in two steps. Structural characterisation was performed using ¹ HNMR and Fourier transform infra‐red (FTIR) spectra. Critical micelle concentration (CMC) of the copolymer was determined by pyrene as a fluorescent probe. Doxorubicin (DOX) was loaded in the micelles by the direct dissolution method. The effects of different variables including type of copolymer, copolymer concentration, stirring rate and stirring time were studied on the physicochemical properties of the micelles including: particle size, zeta potential, release efficiency and loading efficiency of nanoparticles using an irregular factorial design. The in vitro cytotoxicity of DOX‐loaded biotin‐targeted micelles was studied in HepG2 cells which over express biotin receptors by 3, 5‐[dimethylthiazol‐2‐yl]‐2, 5‐diphenyl tetrazolium bromide assay. The successful synthesis of the biotinylated copolymer of chitosan/PMVEMA was confirmed by FTIR and ¹ HNMR. The optimised micelles showed the CMC of 33 μg/ml, particle size of 247 ± 2 nm, zeta potential of +9.46 mV, polydispersity index of 0.22, drug‐loading efficiency of 71% and release efficiency of 84.5 ± 1.6%. The synthesised copolymer was not cytotoxic. The cytotoxicity of DOX‐loaded in targeted micelles on HepG2 cell line was about 2.2‐fold compared with free drug.Inspec keywords: biomedical materials, cellular biophysics, dissolving, drug delivery systems, drugs, electrokinetic effects, fluorescence, Fourier transform infrared spectra, particle size, polymer blends, spectrochemical analysis, toxicologyOther keywords: ¹ HNMR spectra, biotin‐targeted chitosan‐poly (methyl vinyl ether‐alt‐maleic acid) copolymeric micelles, doxorubicin delivery, amide reaction, structural characterisation, Fourier transform infrared spectra, pyrene, fluorescent probe, direct dissolution method, physicochemical properties, particle size, zeta potential, nanoparticles, irregular factorial design, in vitro cytotoxicity, DOX‐loaded biotin‐targeted micelles, 3, 5‐[dimethylthiazol‐2‐yl]‐2, 5‐diphenyl tetrazolium bromide assay, polydispersity index, drug‐loading efficiency, HepG2 cell line, voltage 9.46 mV     

Preparation of alginate oligosaccharide nanoliposomes and an analysis of their inhibitory effects on Caco‐2 cells

The conditions were optimised for preparing Alginate oligosaccharide (AOS) nanoliposomes, and Caco‐2 cell experiments were carried out to examine their antitumour effects. The optimal formulation of AOS nanoliposomes was as follows: a phosphatidylcholine‐to‐cholesterol ratio of 5.12, AOS concentration of 8.44 mg/mL, Tween 80 concentration of 1.11%, and organic phase to aqueous phase ratio of 5.25. Under the above conditions, the experimental encapsulation efficiency was 65.84%, and the AOS nanoliposomes exhibited a small particle size of 323 nm. After Caco‐2 cells were treated with AOS liposomes and AOS for 24 h, AOS nanoliposomes inhibited the growth of Caco‐2 cells to a greater extent than AOS at concentrations of 0.0625, 0.125, 0.25, 0.5 and 1 mg/mL (P  <  0.01). LDH leakage exhibited a concentration‐dependent increase following treatment with 0.5‐1 mg/mL AOS nanoliposomes, and the inhibitory effect of AOS nanoliposomes exhibited a more significant difference than AOS (P  <  0.01). Cells treated with 0.5 mg/mL and 1 mg/mL AOS nanoliposomes displayed a substantial and significant increase in activity compared with AOS (P  < 0.01). Based on these results, AOS nanoliposomes exerted a more significant effect on inhibiting Caco‐2 cell proliferation than AOS.Inspec keywords: evaporation, cellular biophysics, biomedical materials, biomembranes, nanomedicine, enzymes, biochemistry, drug delivery systems, particle size, response surface methodology, molecular biophysics, encapsulation, drugs, lipid bilayers, nanofabrication, materials preparation, polymers, nanostructured materialsOther keywords: reverse‐phase evaporation method, response surface methodology, alginate oligosaccharide nanoliposomes, mitochondrial function, AOS concentration, AOS liposomes, Caco‐2 cell proliferation, AOS nanoliposomes, methyl thiazolyl tetrazolium assay, cell counting kit‐8, lactate dehydrogenase, LDH assay, phosphatidylcholine‐to‐cholesterol ratio, size 323.0 nm, time 24.0 hour     

Antibacterial,anti‐inflammatory and antioxidant effects of acetyl‐11‐α‐keto‐β‐boswellic acid mediated silver nanoparticles in experimental murine mastitis

Mastitis is an important economic disease causing production losses in dairy industry. Antibiotics are becoming ineffective in controlling mastitis due to the emergence of resistant strains requiring the development of novel therapeutic agents. In this study, the authors present the phytochemical synthesis of silver nanoparticles (AgNPs) with acetyl‐11‐α‐keto‐β‐boswellic acid and evaluation of their activity in Staphylococcus aureus induced murine mastitis. Boswellic acid mediated AgNP (BANS) were oval, polydispersed (99.8 nm) with an minimum inhibitory concentration of 0.033 µg ml⁻¹ against S. aureus, inhibitory concentration (IC₅₀) of 30.04 µg ml⁻¹ on mouse splenocytes and safe at an in vivo acute oral dose of 3.5 mg kg⁻¹ in mice. Mastitis was induced in lactating mice by inoculating S. aureus (log₁₀ 5.60 cfu) and treated 6 h post‐inoculation with BANS (0.12 mg kg⁻¹, intramammary and intraperitoneal), and cefepime (1 mg kg⁻¹, intraperitoneal). S. aureus inoculated mice showed increased bacterial load, neutrophil infiltration in mammary glands and elevated C‐reactive protein (CRP) in serum. Oxidative stress was also observed with elevated malondialdehyde level, superoxide dismutase (SOD) and catalase (CAT) activities. BANS treatment significantly (P  < 0.05) reduced bacterial load, CRP, SOD, CAT activities and neutrophil infiltration in affected mammary glands. BANS could be a potential therapeutic agent for managing bovine mastitis.Inspec keywords: nanomedicine, nanoparticles, silver, antibacterial activity, drugs, diseases, enzymesOther keywords: antibacterial effects, antiinflammatory effects, antioxidant effects, acetyl‐11‐α‐keto‐β‐boswellic acid, mediated silver nanoparticles, experimental murine mastitis, economic disease, dairy industry, resistant strains, phytochemical synthesis, Staphylococcus aureus, minimum inhibitory concentration, inoculating S. aureus, neutrophil infiltration, mammary glands, elevated C‐reactive protein, superoxide dismutase, catalase, bovine mastitis, Ag