Poly (vinyl alcohol)/poly (acrylamide‐ co ‐diallyldimethyl ammonium chloride) semi‐IPN hydrogels for ciprofloxacin hydrochloride drug delivery

Herein, the authors developed a new and potential semi‐interpenetrating polymer network (semi‐IPN) hydrogels of poly vinyl alcohol (PVA), acryl amide and diallyldimethyl ammonium chloride employing chemical cross‐linker N, N''‐methylene bisacrylamide (NNMBA) and ammonium persulphate as an initiator by radical polymerisation. To analyse the copolymer formation between two monomers and IPN cross‐linking reaction, the resulting hydrogel was characterised by Fourier transform infrared spectroscopy and the surface morphology was analysed using scanning electron microscopy. Differential scanning calorimetry and X‐ray diffraction studies were also carried out for investigating drug loading and distribution and swelling experiments were carried out for the uptake of water. In vitro release of ciprofloxacin hydrochloride from hydrogel was performed at intestinal conditions. The amount of PVA, NNMBA and total monomer concentration was found to strongly control the drug release behaviour from the hydrogels.Inspec keywords: hydrogels, polymer blends, biomedical materials, drug delivery systems, polymerisation, Fourier transform infrared spectra, surface morphology, scanning electron microscopy, differential scanning calorimetry, X‐ray diffraction, swelling, biological organs, ammonium compoundsOther keywords: PVA‐poly(acrylamide‐co‐diallyldimethyl ammonium chloride) semiIPN hydrogels, ciprofloxacin hydrochloride drug delivery, semiinterpenetrating polymer network hydrogels, polyvinyl alcohol, acryl amide, diallyldimethyl ammonium chloride, chemical crosslinker N,N''‐methylene bisacrylamide, ammonium persulphate, radical polymerisation initiator, NNMBA, copolymer formation, IPN crosslinking reaction, Fourier transform infrared spectroscopy, surface morphology, scanning electron microscopy, differential scanning calorimetry, X‐ray diffraction, drug loading, drug distribution, swelling, water uptake, in vitro ciprofloxacin hydrochloride release, intestinal conditions, total monomer concentration, drug release behaviour     

Catalytic reduction of 2,4‐dinitrophenylhydrazine by cuttlebone supported Pd NPs prepared using Conium maculatum leaf extract

A facile and green process to synthesise cuttlebone supported palladium nanoparticles (Pd NPs/cuttlebone) is reported using Conium maculatum leaf extract and in the absence of chemical solvents and hazardous materials. The antioxidant content of the C. maculatum leaf extract played a significant role in converting Pd²⁺ ions to Pd NPs. Various techniques were used for the characterisation of the Pd NPs/cuttlebone such as field‐emission scanning electron microscopy, X‐ray diffraction, energy dispersive X‐ray spectroscopy, Fourier transform infrared and ultraviolet–visible spectroscopy. This Pd NPs/cuttlebone showed excellent catalytic activity in the reduction of 2,4‐dinitrophenylhydrazine to 2,4‐diaminophenylhydrazine by sodium borohydride as the source of hydrogen at ambient condition. The catalyst could be separated and recycled up to five cycles with no loss of its activity.Inspec keywords: catalysis, catalysts, chemical engineering, palladium, nanoparticles, field emission electron microscopy, scanning electron microscopy, X‐ray diffraction, X‐ray chemical analysis, sodium compounds, ultraviolet spectroscopy, visible spectroscopyOther keywords: catalytic reduction, 2,4‐dinitrophenylhydrazine, cuttlebone, Conium maculatum leaf extract, green process, palladium nanoparticles, antioxidant content, field‐emission scanning electron microscopy, X‐ray diffraction, energy dispersive X‐ray spectroscopy, Fourier transform infrared, ultraviolet–visible spectroscopy, 2,4‐diaminophenylhydrazine, sodium borohydride     

Antibacterial,anticancer and antioxidant potential of silver nanoparticles engineered using Trigonella foenum‐graecum seed extract

In this study, the authors report a simple and eco‐friendly method for the synthesis of silver nanoparticles (AgNPs) using Trigonella foenum‐graecum (TFG) seed extract. They explored several parameters dictating the biosynthesis of TFG‐AgNPs such as reaction time, temperature, concentration of AgNO₃, and TFG extract amount. Physicochemical characterisation of TFG‐AgNPs was done on dynamic light scattering (DLS), field emission electron microscopy, energy dispersive X‐ray spectroscopy, X‐ray diffraction and Fourier transform infrared spectroscopy. The size determination studies using DLS revealed of TFG‐AgNPs size between 95 and 110 nm. The antibacterial activity was studied against Escherichia coli, Proteus vulgaris, Pseudomonas aeruginosa and Staphylococcus aureus. The biosynthesised TFG‐AgNPs showed remarkable anticancer efficacy against skin cancer cell line, A431 and also exhibited significant antioxidant efficacy.Inspec keywords: antibacterial activity, cancer, biomedical materials, silver, nanofabrication, nanomedicine, nanoparticles, microorganisms, skin, cellular biophysics, biochemistry, light scattering, X‐ray chemical analysis, X‐ray diffraction, Fourier transform infrared spectra, particle sizeOther keywords: antibacterial potential, anticancer potential, antioxidant potential, silver nanoparticles, Trigonella foenum‐graecum seed extract, eco‐friendly method, biosynthesis, reaction time, AgNO₃ concentration, TFG extract amount, physicochemical characterisation, dynamic light scattering, field emission electron microscopy, energy dispersive X‐ray spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, size determination, TFG‐AgNPs size, Escherichia coli, Proteus vulgaris, Pseudomonas aeruginosa, Staphylococcus aureus, skin cancer cell line A431, Ag     

Biocompatibility assessment of SiO2 –TiO2 composite powder on MG63 osteoblast cell lines for orthopaedic applications

The objective of this study is to evaluate the biocompatibility of composite powder consisting of silica and titania (SiO₂ –TiO₂) for biomedical applications. The advancement of nanoscience and nanotechnology encourages researchers to actively participate in reinvention of existing materials with improved physical, chemical and biological properties. Hence, a composite/hybrid material has given birth of new materials with intriguing properties. In the present investigation, SiO₂ –TiO₂ composite powder was synthesised by sol‐gel method and the prepared nanocomposite was characterised for its phase purity, functional groups, surface topography by powder X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR) and scanning electron microscopy. Furthermore, to understand the adverse effects of composite, biocompatibility test was analysed by cell culture method using MG63 osteoblast cell lines as a basic screening method. From the results, it was observed that typical Si–O–Ti peaks in FT‐IR confirms the formation of composite and the crystallinity of the composite powder was analysed by XRD analysis. Further in vitro biocompatibility and acridine orange results have indicated better biocompatibility at different concentrations on osteoblast cell lines. On the basis of these observations, we envision that the prepared silica–titania nanocomposite is an intriguing biomaterial for better biomedical applications.Inspec keywords: bioceramics, nanocomposites, silicon compounds, titanium compounds, nanofabrication, sol‐gel processing, surface topography, X‐ray diffraction, Fourier transform infrared spectra, scanning electron microscopy, X‐ray chemical analysis, cellular biophysics, nanomedicineOther keywords: MG63 osteoblast cell lines, orthopaedic applications, biomedical applications, nanoscience, nanotechnology, nanotoxicology, physical properties, chemical properties, biological properties, biological applications, biomaterial synthesis, composite‐hybrid materials, intriguing properties, sol‐gel method, surface properties, ceramic nanocomposite, phase purity, functional groups, surface topography, powder X‐ray diffraction, Fourier transform infrared spectroscopy, FT‐IR spectroscopy, scanning electron microscopy, energy dispersive X‐ray analysis, biocompatibility test, cell culture method, screening method, crystallinity, XRD, in vitro biocompatibility, acridine orange, silica‐titania nanocomposite powder, SiO₂ ‐TiO₂      

In‐situ fabrication of zirconium–titanium nano‐composite and its coating on Ti‐6Al‐4V for biomedical applications

In this study, nanocomposite powder consisting of zirconia and titania (Zr–Ti) have been synthesised by sol–gel method, with the aim of protecting Ti‐6Al‐4V surface. A simple and low cost electrophoretic deposition (EPD) technique has been employed for coating the nanocomposite material on Ti‐6Al‐4V. The prepared nanocomposite powder was characterised for its functional groups, phase purity, surface topography by Fourier transform infrared spectroscopy, powder X‐ray diffraction and scanning electron microscopy. Further, the biocompatibility nature of the composite powder was studied by [3‐(4, 5‐dimethylthiazol‐2‐yl)‐2, 5‐diphenyltetrazolium bromide] colorimetric assay and fluorescence analysis with MG63 osteoblast cell lines. The electrochemical behaviour of composite coating was investigated by potentiodynamic polarization and electrochemical impedance method. The results obtained from the electrochemical techniques indicate more corrosion resistance behaviour with increase of R _ct value with the corresponding decrease in R _dl values. From the above findings, the composite coating acts as a barrier layer against corrosion by preventing the leaching of metal ions from a dense and defect free coating. A scratch test analyser was used to assess the integrity of the coating; the lower traction force value of composite coating with increase in load has confirmed the presence of thick adherent layer on the substrate.Inspec keywords: zirconium compounds, titanium compounds, titanium alloys, aluminium alloys, vanadium alloys, nanofabrication, nanocomposites, nanoparticles, sol‐gel processing, electrophoretic coating techniques, surface topography, Fourier transform infrared spectra, X‐ray diffraction, scanning electron microscopy, X‐ray chemical analysis, fluorescence, cellular biophysics, biomedical materials, electrochemical impedance spectroscopy, corrosion resistance, corrosion protection, corrosion protective coatings, adhesionOther keywords: in‐situ fabrication, zirconium‐titanium nanocomposite powder, biomedical applications, zirconia, titania, sol‐gel method, electrophoretic deposition, EPD, functional groups, phase purity, surface topography, Fourier transform infrared spectroscopy, powder X‐ray diffraction, scanning electron microscopy, energy dispersive X‐ray analysis, biocompatibility, 3‐(4, 5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide colorimetric assay, acridine range fluorescence analysis, MG63 osteoblast cell lines, electrochemical behaviour, composite coating, potentiodynamic polarization, electrochemical impedance spectroscopy, corrosion resistance, barrier layer, leaching, defect free coating layer, scratch test analysis, adherent layer, TiAlV‐ZrO₂ ‐TiO₂      

Solvothermal‐assisted green synthesis of hybrid Chi‐Fe3 O4 nanocomposites: a potential antibacterial and antibiofilm material

In this present study, a hybrid Chi‐Fe₃ O₄ was prepared, characterised and evaluated for its antibacterial and antibiofilm potential against Staphylococcus aureus and Staphylococcus marcescens bacterial pathogens. Intense peak around 260 nm in the ultraviolet–visible spectrum specify the formation of magnetite nanoparticles. Spherical‐shaped particles with less agglomeration and particle size distribution of 3.78–46.40 nm were observed using transmission electron microscopy analysis and strong interaction of chitosan with the surface of magnetite nanoparticles was studied using field emission scanning microscopy (FESEM). X‐ray diffraction analysis exhibited the polycrystalline and spinel structure configuration of the nanocomposite. Presence of Fe and O, C and Cl elements were confirmed using energy dispersive X‐ray microanalysis. Fourier transform infrared spectroscopic analysis showed the reduction and formation of Chi‐Fe₃ O₄ nanocomposite. The antibacterial activity by deformation of the bacterial cell walls on treatment with Chi‐Fe₃ O₄ nanocomposite and its interaction was visualised using FESEM and the antibiofilm activity was determined using antibiofilm assay. In conclusion, this present study shows the green synthesis of Chi‐Fe₃ O₄ nanocomposite and evaluation of its antibacterial and antibiofilm potential, proving its significance in medical and biological applicationsInspec keywords: visible spectra, particle size, magnetic particles, nanocomposites, nanoparticles, X‐ray diffraction, nanofabrication, transmission electron microscopy, X‐ray chemical analysis, nanomagnetics, microorganisms, antibacterial activity, iron compounds, ultraviolet spectra, biomedical materials, field emission scanning electron microscopy, Fourier transform infrared spectra, filled polymers, crystal growth from solution, polymer structureOther keywords: potential antibacterial material, antibiofilm potential, magnetite nanoparticles, solvothermal‐assisted green synthesis, hybrid Chi‐Fe₃ O₄ nanocomposites, staphylococcus aureus, staphylococcus marcescens, bacterial pathogens, ultraviolet–visible spectrum, spherical‐shaped particles, particle size, transmission electron microscopy, FESEM, field emission scanning electron microscopy, X‐ray diffraction, spinel structure, polycrystalline structure, energy dispersive X‐ray microanalysis, Fourier transform infrared spectroscopic analysis, deformation, bacterial cell walls, Fe₃ O₄      

Alkaline treatment effect on the properties of in‐situ synthesised ZnO nanoparticles on cotton fabric

In this study, an in‐situ approach was used to synthesise zinc oxide nanoparticles on the surface of cotton fabric. The effect of alkaline pre‐ and after‐treatment and Zn²⁺ concentration was studied on the morphological, structural, thermal, photocatalytic, and antibacterial properties of loaded cotton fabrics. Scanning electron microscopy, energy dispersive X‐ray spectroscopy, X‐ray diffractometer, thermogravimetric analysis, and attenuated total reflection Fourier transform infrared spectrometer were used to characterise the properties of loaded cotton fabrics. Alkaline after‐treatment of cotton fabric presented more dispersed zinc oxide nanoparticles, and an increase in Zn²⁺ concentration led to form agglomerated nanoparticles on the surface of cotton fibres. The loaded cotton fabrics with zinc oxide nanoparticles presented an inhibition zone against Staphylococcus aureus and Escherichia coli. In addition, the stain of methylene blue on the surface of loaded samples was degraded after irradiated under visible light.Inspec keywords: nanofabrication, zinc compounds, II‐VI semiconductors, nanoparticles, nanomedicine, antibacterial activity, catalysis, photochemistry, cotton fabrics, scanning electron microscopy, X‐ray chemical analysis, X‐ray diffraction, thermal analysis, attenuated total reflection, Fourier transform infrared spectroscopy, microorganisms, materials preparationOther keywords: alkaline treatment effect, in‐situ synthesised ZnO nanoparticles, alkaline pretreatment, alkaline after‐treatment, Zn²⁺ concentration, morphological property, structural property, thermal property, photocatalytic property, antibacterial property, loaded cotton fabrics, scanning electron microscopy, energy dispersive X‐ray spectroscopy, X‐ray diffractometer, thermogravimetric analysis, attenuated total reflection Fourier transform infrared spectrometer, agglomerated nanoparticles, zinc oxide nanoparticles, inhibition zone, Staphylococcus aureus, Escherichia coli, methylene blue, visible light, ZnO     

Biosynthesis of Selenium Nanoparticles using yeast Nematospora coryli and examination of their anti‐candida and anti‐oxidant activities

Selenium (Se) is a rare and essential element for the human body and other living organisms because of its role in the structure of several proteins and having anti‐oxidant properties to reduce oxidative stress at cells. Some microorganisms can absorb Se oxyanions and convert them into zero‐valent Se (Se0) in the nanoscale dimensions, which can be used for producing Se nanoparticles (SeNPs). In the present study, SeNPs were intracellularly biosynthesised by yeast Nematospora coryli, which is an inexpensive method and does not involve using materials hazardous for human and environment. The produced NPs were refined by a two‐phase system and then characterised and identified by ultraviolet–visible, X‐ray diffraction, X‐ray fluorescence, transmission electron microscope, and Fourier transform infrared spectroscopy analyses. The structural analysis of biosynthesised SeNPs showed spherical‐shaped NPs with size ranging from 50 to 250 nm. Also, extracted NPs were applied to explore their anti‐candida and anti‐oxidant activities. The results of this investigation confirm the biological properties of Se.Inspec keywords: X‐ray diffraction, microorganisms, oxidation, transmission electron microscopy, reduction (chemical), nanomedicine, biomedical materials, visible spectra, nanoparticles, proteins, nanofabrication, selenium, ultraviolet spectra, particle size, Fourier transform infrared spectra, antibacterial activityOther keywords: proteins, oxidative stress, Se oxyanions, yeast, biosynthesised SeNPs, anti‐oxidant activities, human body, living organisms, Se nanoparticles, Nematospora coryli, anti‐candida activities, biosynthesis, ultraviolet–visible analysis, X‐ray diffraction, X‐ray fluorescence, transmission electron microscope, Fourier transform infrared spectroscopy, structural analysis, size 50.0 nm to 250.0 nm, Se     

Biocompatibility enhancement of graphene oxide‐silver nanocomposite by functionalisation with polyvinylpyrrolidone

Several materials such as silver are used to enhance graphene oxide (GO) sheets antimicrobial activity. However, these toxic materials decrease its biocompatibility and hinder its usage in many biological applications. Therefore, there is an urgent need to develop nanocomposites that can preserve both the antimicrobial activity and biocompatibility simultaneously. This work highlights the importance of functionalisation of GO sheets using Polyvinylpyrrolidone (PVP) and decorating them with silver nanoparticles (AgNPs) in order to enhance their antimicrobial activity and biocompatibility at the same time. The structural and morphological characterisations were performed by UV‐Visible, Fourier transform infrared (FTIR), and Raman spectroscopic techniques, X‐ray diffraction (XRD), and high‐resolution transmission electron microscopy (HR‐TEM). The antimicrobial activities of the prepared samples against Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans were studied. The cytotoxicity of prepared materials was tested against BJ1 normal skin fibroblasts. The results indicated that the decoration with AgNPs showed a significant increase in the antimicrobial activity of GO and FGO sheets, and functionalisation of GO sheets and GO‐Ag nanocomposite with PVP improved the cell viability about 40 and 35%, respectively.Inspec keywords: biomedical materials, nanocomposites, visible spectra, ultraviolet spectra, X‐ray diffraction, cellular biophysics, nanoparticles, Raman spectra, filled polymers, transmission electron microscopy, silver, microorganisms, antibacterial activity, nanomedicine, nanofabrication, graphene compounds, toxicology, Fourier transform infrared spectraOther keywords: graphene oxide‐silver nanocomposite, polyvinylpyrrolidone, toxic materials, biocompatibility, antimicrobial activity, morphological characterisations, structural characterisations, UV‐visible spectra, Fourier transform infrared spectra, Raman spectra, X‐ray diffraction, high‐resolution transmission electron microscopy, Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans, cytotoxicity, BJ1 normal skin fibroblasts, cell viability, CO‐Ag     

Biocompatible biodegradable polycaprolactone/basil seed mucilage scaffold for cell culture

In this study, a polymer obtained from the basil seed mucilage (BSM) in combination with polycaprolactone (PCL), was used in the 2D scaffold production process for cell culture. First, combinations of two polymers with different ratios and concentrations were prepared and electrospun. Among these samples, a sample with a BSM/PCL ratio of 2/3 was used to perform different tests due to its fibre uniformity and appropriate diameter. The Fourier transform infrared spectrometer test was carried out to chemically analyse the scaffold, the X‐ray diffraction test to determine the crystallinity of the scaffold, and the contact angle test to determine the hydrophilicity of the scaffold. The strength, porosity, and degradation percentage of the scaffold were also studied. With appropriate conditions of the scaffold for cell culture determined, Vero epithelial cells were cultured on the scaffold. Results obtained from cell culture indicated that the adhesion of the scaffold was suitable for the appropriate growth cells.Inspec keywords: adhesion, porosity, hydrophilicity, tissue engineering, X‐ray diffraction, electrospinning, cellular biophysics, contact angle, biodegradable materials, biomedical materials, polymer blends, Fourier transform infrared spectraOther keywords: X‐ray diffraction test, contact angle test, cell culture, biocompatible biodegradable scaffold, polycaprolactone‐basil seed mucilage scaffold, Fourier transform infrared spectrometer test, scaffold hydrophilicity, Vero epithelial cells, scaffold crystallinity, 2D scaffold production process     

Catalytic reduction in 4‐nitrophenol using Actinodaphne madraspatana Bedd leaves‐mediated palladium nanoparticles

There is a growing demand for the development of non‐toxic, cost‐effective, and environmentally benign green synthetic strategy for the production of metal nanoparticles. Herein, the authors have reported Actinodaphne madraspatana Bedd (AMB) leaves as the bioreducing agent for the synthesis of palladium nanoparticles (PdNPs) and its catalytic activity was evaluated for the reduction of 4‐nitrophenol (4‐NP) to 4‐aminophenol with undisruptive effect on human health and environment. The broad and continuous absorbance spectrum obtained in the UV–visible region indicated the formation of PdNPs. The synthesized PdNPs were found to be crystalline, spherical, and quasi‐spherical in shape with an average particle size of 13 nm was confirmed by X‐ray diffractometer and transmission electron microscope. Fourier transform infrared spectra revealed the active photo constituents present in the aqueous extract of AMB involved in the bioreduction of palladium ions to PdNPs. The catalytic activity of biosynthesized PdNPs was demonstrated for the reduction of 4‐NP via electron‐relay process. Also, the influential parameters such as catalyst dosage, concentration of 4‐NP, and sodium borohydride were studied in detail. From the present study, PdNPs were found to be a potential nanocatalyst for nitro compound reduction and also for environmental remediation of wastewater effluents from industries.Inspec keywords: palladium, nanoparticles, particle size, nanofabrication, catalysis, catalysts, reduction (chemical), organic compounds, ultraviolet spectra, visible spectra, X‐ray diffraction, transmission electron microscopy, Fourier transform infrared spectraOther keywords: nitro compound reduction, environmental remediation, wastewater effluents, Pd, nanocatalyst, sodium borohydride, 4‐NP concentration, catalyst dosage, electron‐relay process, bioreduction, aqueous extract, Fourier transform infrared spectra, transmission electron microscopy, X‐ray diffractometry, particle size, quasispherical shape, spherical shape, crystalline shape, UV‐visible abosprtion spectra, human environment, human health, 4‐aminophenol, catalytic activity, bioreducing agent, metal nanoparticles, Actinodaphne madraspatana Bedd leaves‐mediated palladium nanoparticles, 4‐nitrophenol, catalytic reduction     

Alyssum lepidium mucilage as a new source for electrospinning: production and physicochemical characterisation

The electrospinning technique was used for the nanofiber production of Alyssum lepidium mucilage with acetic acid and polyvinyl alcohol (PVA) polymer. Some parameters such as voltage, polymer concentration, tip‐to‐collector distance, and feed rate were optimised and applied for the fabrication of the nanofiber membranes of the seeds mucilage. The scanning electron microscopy images were used to find the optimised conditions for the electrospinning process. It was found that the aqueous solution of Alyssum mucilage/PVA (80:20), voltage (18 kV), polymer concentration (50%), tip‐to‐collector distance (10 cm) and feed rate (0.125 ml/h) could be successfully used to obtain uniform nanofibers with diameters as low as 139.9 nm. X‐ray diffraction and Fourier transform infrared spectrometer analysis also proved the presence of the alyssum mucilage/PVA nanofiber. In this study, the used electrospun procedure was biodegradable, inexpensive, non‐toxic, and maintainable enough to optimise the mucilage nanofiber fabrication as a new source, thereby improving the potential application of the nanofiber biomembrane in filtration and medical systems with biocompatible and biodegradable properties.Inspec keywords: electrospinning, nanofibres, nanofabrication, polymer fibres, scanning electron microscopy, X‐ray diffraction, Fourier transform infrared spectraOther keywords: Alyssum lepidium mucilage, electrospinning, physicochemical characterisation, nanofiber production, acetic acid, polyvinyl alcohol, PVA polymer, polymer concentration, tip‐to‐collector distance, feed rate, scanning electron microscopy, X‐ray diffraction, Fourier transform infrared spectrometer analysis, voltage 18 kV, distance 10 cm     

Differential antibacterial response exhibited by graphene nanosheets toward gram‐positive bacterium Staphylococcus aureus

Two different morphological forms of graphene nanosheets: improved reduced graphene oxide (IRGO) and modified reduced GO (rGO) (MRGO) have been synthesised by improved and modified methods, respectively. Physical characterisations of these graphene nanosheets were carried out using X‐ray diffraction, Fourier transform infrared spectroscopy, and Raman spectroscopy. Colloidal stability of these nanosheets toward a selected bacterium (e.g. Staphylococcus aureus) was ascertained by zeta potential. In the present study, the authors for the first time made an attempt to study and compare the potentialities of these two different forms of graphene nanosheets as efficient bactericidal agents. Field‐emission scanning electron microscopy and TEM with energy dispersive X‐ray spectroscopy (EDAX) studies of IRGO and MRGO have been carried out to explore their underlying mechanism of antibacterial responses through physical as well as chemical interactions with the selected bacterial species.Inspec keywords: scanning electron microscopy, X‐ray diffraction, graphene, Raman spectra, field emission electron microscopy, microorganisms, colloids, X‐ray chemical analysis, antibacterial activity, electrokinetic effects, nanofabrication, Fourier transform infrared spectra, nanobiotechnologyOther keywords: graphene nanosheets, differential antibacterial response, gram‐positive bacterium, reduced graphene oxide, Staphylococcus aureus, X‐ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, colloidal stability, field‐emission scanning electron microscopy, TEM, EDAX, C     

Synthesis,characterisation and bactericidal effect of ZnO nanoparticles via chemical and bio‐assisted (Silybum marianum in vitro plantlets and callus extract) methods: a comparative study

Currently, the evolution of green chemistry in the synthesis of nanoparticles (NPs) with the usage of plants has captivated a great response. In this study, in vitro plantlets and callus of Silybum marianum were exploited as a stabilising agent for the synthesis of zinc oxide (ZnO) NPs using zinc acetate and sodium hydroxide as a substitute for chemical method. The contemporary investigation defines the synthesis of ZnO NPs prepared by chemical and bio‐extract‐assisted methods. Characterisation techniques such as X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy and energy dispersive X‐ray were used to confirm the synthesis. Although chemical and bio‐assisted methods are suitable choices for NPs synthesis, the bio‐assisted green assembly is advantageous due to superior stability. Moreover, this report describes the antibacterial activity of the synthesised NPs against standard strains of Klebsiella pneumonia and Bacillus subtilis.Inspec keywords: zinc compounds, II‐VI semiconductors, wide band gap semiconductors, nanoparticles, nanofabrication, semiconductor growth, antibacterial activity, X‐ray diffraction, X‐ray chemical analysis, scanning electron microscopy, Fourier transform infrared spectra, nanobiotechnologyOther keywords: chemical methods, bio‐assisted methods, Silybum marianum in vitro plantlets methods, Silybum marianum in vitro callus extract methods, green chemistry, zinc oxide nanoparticles, sodium hydroxide, zinc acetate, X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X‐ray analysis, bio‐assisted green assembly, antibacterial activity, Klebsiella pneumonia, Bacillus subtilis, ZnO     

Green synthesis,characterisation and bioactivity of plant‐mediated silver nanoparticles using Decalepis hamiltonii root extract

Consistent search of plants for green synthesis of silver nanoparticles (SNPs) is an important arena in Nanomedicine. This study focuses on synthesis of SNPs using bioreduction of silver nitrate (AgNO₃) by aqueous root extract of Decalepis hamiltonii. The biosynthesis of SNPs was monitored by UV–vis analysis at absorbance maxima 432 nm. The fluorescence emission spectra of SNPs illustrated the broad emission peak 450–483 nm at different excitation wavelengths. The surface characteristics were studied by scanning electron microscope and atomic force microscopy, showed spherical shape of SNPs and dynamic light scattering analysis confirmed the average particle size 32.5 nm and the presence of metallic silver was confirmed by energy dispersive X‐ray. Face centred cubic structure with crystal size 33.3 nm was revealed by powder X‐ray diffraction. Fourier transform infrared spectroscopy indicated the biomolecules involved in the reduction mainly polyols and phenols present in root extracts were found to be responsible for the synthesis of SNPs. The stability and charge on SNPs were revealed by zeta potential analysis. In addition, on therapeutic forum, the synthesised SNPs elicit antioxidant and antimicrobial activity against Bacillus cereus, Bacillus licheniformis, Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus.Inspec keywords: silver, nanoparticles, nanomedicine, antibacterial activity, biomedical materials, nanofabrication, particle size, microorganisms, ultraviolet spectra, visible spectra, fluorescence, scanning electron microscopy, atomic force microscopy, light scattering, X‐ray diffraction, X‐ray chemical analysis, Fourier transform infrared spectra, molecular biophysics, electrokinetic effectsOther keywords: phenols, zeta potential analysis, therapeutic forum, antioxidant activity, antimicrobial activity, Bacillus cereus, Bacillus licheniformis, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Ag, polyols, biomolecules, Fourier transform infrared spectroscopy, powder X‐ray diffraction, crystal size, face centred cubic structure, energy dispersive X‐ray analysis, metallic silver, particle size, dynamic light scattering analysis, spherical shape, atomic force microscopy, scanning electron microscopy, surface characteristics, excitation wavelengths, fluorescence emission spectra, UV‐visible analysis, biosynthesis, silver nitrate bioreduction, nanomedicine, Decalepis hamiltonii aqueous root extract, bioactivity, plant‐mediated silver nanoparticles, green synthesis     

Rapid synthesis of Bi 2 O 3 nano‐needles via ‘green route’ and evaluation of its anti‐fungal activity

Here, the authors report a rapid, simple, and eco‐friendly process for synthesis of Bi₂ O₃ nano‐needles. Dioscorea alata tuber extract was used as both reducing and capping agent for the first time. These nanoparticles were characterised by X‐ray diffraction, field emission scanning electron microscope, and Fourier transform infrared (FTIR) spectrometry, the nano‐structured Bi₂ O₃ needles have an average diameter of 158 nm with the lengths in the range of 1–3 μm. CLSI M27‐A2 standard was followed for evaluation of anti‐fungal activity. Bi₂ O₃ nano‐needles show remarkable activity against Candida albicans. It exhibits four time greater activity than bulk Bi₂ O₃ powder and two time greater activity than itraconazole, which makes it a potent anti‐fungal drug.Inspec keywords: bismuth compounds, nanoparticles, X‐ray diffraction, field emission scanning electron microscopy, Fourier transform infrared spectra, drugs, nanomedicine, biomedical materials, nanofabricationOther keywords: nanoneedles, antifungal activity, nanoparticles, X‐ray diffraction, field emission scanning electron microscope, Fourier transform infrared spectrometry, CLSI M27‐A2 standard, Candida albicans, itraconazole, antifungal drug, Bi₂ O₃      

Gentamicin‐gold nanoparticles conjugate: a contrast agent for X‐ray imaging of infectious foci due to Staphylococcus aureus

There is no optimal imaging method for the detection of unknown infectious foci in some diseases. This study introduces a novel method in X‐ray imaging of infection foci due to Staphylococcus aureus by developing a contrast agent based on gold nanoparticles (GNPs). GNPs in spherical shape were synthesised by the reduction of tetrachloroauric acid with sodium citrate. Then gentamicin was bound directly to citrate functionalised GNPs and the complex was stabilised by polyethylene glycol. The interaction of gentamicin with GNPs was confirmed by ultraviolet–visible and Fourier transform infrared spectroscopies. The stability of complex was studied in human blood up to 6 h. The stability of conjugate was found to be high in human blood with no aggregation. The biodistribution study showed localisation of gentamicin–GNPs conjugate at the site of Staphylococcal infection. The infection site was properly visualised in X‐ray images in mouse model using the gentamicin–GNPs conjugate as a contrast agent. The results demonstrated that one may consider the potential of new nanodrug as a contrast agent for X‐ray imaging of infection foci in human beings which needs more investigations.Inspec keywords: drugs, nanomedicine, nanoparticles, nanofabrication, diagnostic radiography, microorganisms, diseases, polymers, ultraviolet spectra, visible spectra, Fourier transform infrared spectra, goldOther keywords: gentamicin‐gold nanoparticle conjugate, contrast agent, X‐ray imaging, Staphylococcus aureus, disease, tetrachloroauric acid reduction, sodium citrate, polyethylene glycol, ultraviolet‐visible spectroscopy, Fourier transform infrared spectroscopy, human blood, Staphylococcal infection, X‐ray images, murine model, nanodrug     

Optimised synthesis of ZnO‐nano‐fertiliser through green chemistry: boosted growth dynamics of economically important L. esculentum

Mounting‐up economic losses to annual crops yield due to micronutrient deficiency, fertiliser inefficiency and increasing microbial invasions (e.g. Xanthomonas cempestri attack on tomatoes) are needed to be solved via nano‐biotechnology. So keeping this in view, the authors’ current study presents the new horizon in the field of nano‐fertiliser with highly nutritive and preservative effect of green fabricated zinc oxide‐nanostructures (ZnO‐NSs) during Lycopersicum esculentum (tomato) growth dynamics. ZnO‐NS prepared via green chemistry possesses highly homogenous crystalline structures well‐characterised through ultraviolet and visible spectroscopy, Fourier transform infrared spectroscopy, X‐ray diffraction and scanning electron microscope. The ZnO‐NS average size was found as small as 18 nm having a crystallite size of 5 nm. L. esculentum were grown in different concentrations of ZnO‐NS to examine the different morphological parameters includes time of seed germination, germination percentage, the number of plant leaves, the height of the plant, average number of branches, days count for flowering and fruiting time period along with fruit quantity. Promising results clearly predict that bio‐fabricated ZnO‐NS at optimum concentration resulted as growth booster and dramatically triggered the plant yield.Inspec keywords: zinc compounds, II‐VI semiconductors, wide band gap semiconductors, nanostructured materials, nanofabrication, ultraviolet spectra, visible spectra, Fourier transform infrared spectra, X‐ray diffraction, scanning electron microscopy, crystallites, biomedical materials, nanomedicineOther keywords: ZnO‐nanofertiliser, green chemistry, boosted growth dynamics, L. esculentum, mounting‐up economic losses, micronutrient deficiency, fertiliser inefficiency, microbial invasions, Xanthomonas cempestri, nanobiotechnology, zinc oxide‐nanostructures, Lycopersicum esculentum, high‐homogenous crystalline structures, ultraviolet spectroscopy, visible spectroscopy, Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, crystallite size, morphological parameters, seed germination, germination percentage, plant leaves, ZnO     

Evaluation of antifungal effect of iron‐oxide nanoparticles against different Candida species

Iron‐oxide nanoparticles (IONPs) have been widely favoured due to their biodegradable, low cytotoxic effects and having reactive surface which can be altered with biocompatible coatings. Considering various medical applications of IONPs, the authors were encouraged to study whether IONPs could be effective against fungal infections caused by Candida species. In this study, IONPs were characterised by scanning electron microscopy, X‐ray diffraction, Fourier transform infrared spectroscopy and vibrating sample magnetometer. The goal of this study was to evaluate the antifungal activity of IONPs against different Candida spp. compared with fluconazole (FLC). IONPs were spherical with the size of 30–40 nm. The minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) values of IONPs ranged from 62.5 to 500 µg/ml and 500 to 1000 μg/ml, respectively. The MIC and MFC of FLC were in range of 16–128 μg/ml and 64–512 μg/ml, respectively. The growth inhibition value indicated that Candida tropicalis, Candida albicans and Candida glabrata spp. were most susceptible to IONPs. The finding showed that the IONPs possessed antifungal potential against pathogenic Candida spp. and could inhibit the growth of all the tested Candida spp. Further studies, both in vitro and in vivo (including susceptibility, toxicity, Probability of kill (PK) and efficacy studies) are needed to determine whether IONPs are suitable for medicinal purposes.Inspec keywords: iron compounds, nanoparticles, nanomedicine, biomedical materials, microorganisms, cellular biophysics, toxicology, drugs, scanning electron microscopy, X‐ray diffraction, Fourier transform infrared spectraOther keywords: antifungal effect, iron‐oxide nanoparticles, Candida species, biodegradable effects, cytotoxic effects, reactive surface, biocompatible coatings, medical applications, IONP, fungal infections, Candidiasis, immunocompromised hosts, antifungal drugs, resistant organisms, antifungal properties, side effects, chemical drugs, scanning electron microscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometer, antifungal activity, disc diffusion, broth microdilution, minimal inhibitory concentration, minimum fungicidal concentration, Candida tropicalis, Candida Albicans, Candida glabrata, antifungal potential, Fe₃ O₄      

Green synthesis of copper oxide nanoparticles using aqueous extract of Convolvulus percicus L. as reusable catalysts in cross‐ coupling reactions and their antibacterial activity

CuO nanoparticles (NPs) were prepared by Convolvulus percicus leaves extract as a reducing and stabilising agent. The green synthesised copper oxide NPs was characterised by transmission electron microscope, energy dispersive X‐Ray spectroscopy, X‐ray diffraction, Fourier transform infrared and ultraviolet‐visible analysis. The activities of the CuO NPs as catalyst were tested in the formation of C‐N and C‐O bonds. The N ‐arylated and O ‐arylated products of amides, N‐H heterocycles and phenols were obtained in excellent yields. Furthermore, the separation and recovery of copper oxide NPs was very simple, effective and economical. The recovered catalyst can be reused several times without significant loss of its catalytic activity. Moreover, the antibacterial activity of these NPs was tested against two human pathogenic microbes and showed significant antimicrobial activity against these pathogenic bacteria.Inspec keywords: copper compounds, nanoparticles, nanomedicine, antibacterial activity, biomedical materials, nanofabrication, microorganisms, catalysts, transmission electron microscopy, X‐ray chemical analysis, X‐ray diffraction, Fourier transform spectra, infrared spectra, ultraviolet spectra, visible spectra, catalysisOther keywords: green synthesis, copper oxide nanoparticles, Convolvulus percicus L. aqueous extract, reusable catalysts, cross‐coupling reactions, antibacterial activity, reducing agent, stabilising agent, transmission electron microscope, energy dispersive X‐ray spectroscopy, X‐ray diffraction, Fourier transform infrared spectra, ultraviolet‐visible spectra, C‐N bonds, C‐O bonds, N‐arylated products, O‐arylated products, amides, N‐H heterocycles, phenols, catalytic activity, human pathogenic microbes, antimicrobial activity, CuO